! Started logfile: J1812-2836_S_2005_05_12_yyk_uvs.log on Sat Oct  8 17:34:42 2005
obs J1812-2836_S_2005_05_12_yyk_uve.fits
! Reading UV FITS file: J1812-2836_S_2005_05_12_yyk_uve.fits
! AN table 1: 18 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.979012 visibilities/baseline/integration-bin.
! Found source: J1812-2836
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1442 lines of history.
! 
! Reading 3172 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1812-2836_S_2005_05_12_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.309951 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.424 mas, bmaj=6.267 mas, bpa=-2.025 degrees
! Estimated noise=1.36494 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.212983 Jy
! Component: 100  -  total flux cleaned = 0.288525 Jy
! Total flux subtracted in 100 components = 0.288525 Jy
! Clean residual min=-0.009687 max=0.026802 Jy/beam
! Clean residual mean=-0.000176 rms=0.004078 Jy/beam
! Combined flux in latest and established models = 0.288525 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 0.288525 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.114383Jy  sigma=1.771910
! Fit after  self-cal, rms=0.114290Jy  sigma=1.770029
! Inverting map and beam 
! Estimated beam: bmin=2.424 mas, bmaj=6.267 mas, bpa=-2.025 degrees
! Estimated noise=1.36494 mJy/beam.
! Added new window around map position (2.5, 1.5).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0401738 Jy
! Component: 100  -  total flux cleaned = 0.0629422 Jy
! Total flux subtracted in 100 components = 0.0629422 Jy
! Clean residual min=-0.007281 max=0.013958 Jy/beam
! Clean residual mean=-0.000142 rms=0.002304 Jy/beam
! Combined flux in latest and established models = 0.351467 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 55 components and 0.351467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094458Jy  sigma=1.408117
! Fit after  self-cal, rms=0.094420Jy  sigma=1.406547
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.406 mas, bmaj=8.527 mas, bpa=-2.103 degrees
! Estimated noise=0.789487 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0206979 Jy
! Component: 100  -  total flux cleaned = 0.0285987 Jy
! Component: 150  -  total flux cleaned = 0.0316054 Jy
! Component: 200  -  total flux cleaned = 0.0320012 Jy
! Total flux subtracted in 200 components = 0.0320012 Jy
! Clean residual min=-0.007614 max=0.008570 Jy/beam
! Clean residual mean=-0.000541 rms=0.002363 Jy/beam
! Combined flux in latest and established models = 0.383469 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 79 components and 0.383469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090090Jy  sigma=1.350698
! Fit after  self-cal, rms=0.090091Jy  sigma=1.349780
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.406 x 8.527 at -2.103 degrees (North through East)
! Clean map  min=-0.0076043  max=0.25258 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.01567
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.92     HN        1.16     KP        0.90     
!   LA        1.13     MK        0.99     NL        0.96     OV        0.91     
!   PT        0.99     SC        0.92     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.99124
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.15     KP        0.98     
!   LA        1.09     MK        0.99     NL        0.99     OV        0.94     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.933602
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.46     FD        1.19     HN        1.15     KP        0.93     
!   LA        0.99     MK        1.02     NL        1.05     OV        0.97     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.03305
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        1.03     HN        1.03     KP        0.84     
!   LA        1.17     MK        1.06     NL        0.95     OV        0.81     
!   PT        0.88     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.090091Jy  sigma=1.349780
! Fit after  self-cal, rms=0.078582Jy  sigma=1.145647
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078582Jy  sigma=1.145647
! Fit after  self-cal, rms=0.078573Jy  sigma=1.145263
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.432 mas, bmaj=8.561 mas, bpa=-1.364 degrees
! Estimated noise=0.769947 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00642026 Jy
! Component: 100  -  total flux cleaned = -0.00809623 Jy
! Component: 150  -  total flux cleaned = -0.00851141 Jy
! Component: 200  -  total flux cleaned = -0.00868632 Jy
! Total flux subtracted in 200 components = -0.00868632 Jy
! Clean residual min=-0.004161 max=0.004679 Jy/beam
! Clean residual mean=-0.000109 rms=0.001163 Jy/beam
! Combined flux in latest and established models = 0.374782 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 86 components and 0.374782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078444Jy  sigma=1.137717
! Fit after  self-cal, rms=0.078401Jy  sigma=1.137259
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078401Jy  sigma=1.137259
! Fit after  self-cal, rms=0.076172Jy  sigma=1.097694
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000258741 Jy
! Component: 100  -  total flux cleaned = 0.000254585 Jy
! Component: 150  -  total flux cleaned = 0.000208034 Jy
! Component: 200  -  total flux cleaned = 0.000165868 Jy
! Total flux subtracted in 200 components = 0.000165868 Jy
! Clean residual min=-0.004003 max=0.004336 Jy/beam
! Clean residual mean=-0.000110 rms=0.001136 Jy/beam
! Combined flux in latest and established models = 0.374948 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 90 components and 0.374948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076087Jy  sigma=1.096779
! Fit after  self-cal, rms=0.075989Jy  sigma=1.094723
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.432 x 8.561 at -1.364 degrees (North through East)
! Clean map  min=-0.0039494  max=0.25064 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075989Jy  sigma=1.094723
! Fit after  self-cal, rms=0.071720Jy  sigma=1.007504
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071720Jy  sigma=1.007504
! Fit after  self-cal, rms=0.071716Jy  sigma=1.007307
! Inverting map and beam 
! Estimated beam: bmin=3.44 mas, bmaj=8.618 mas, bpa=-1.308 degrees
! Estimated noise=0.7685 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000377843 Jy
! Component: 100  -  total flux cleaned = 0.000461038 Jy
! Component: 150  -  total flux cleaned = 0.000536483 Jy
! Component: 200  -  total flux cleaned = 0.000605586 Jy
! Total flux subtracted in 200 components = 0.000605586 Jy
! Clean residual min=-0.003842 max=0.004222 Jy/beam
! Clean residual mean=-0.000061 rms=0.001027 Jy/beam
! Combined flux in latest and established models = 0.375554 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 98 components and 0.375554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071673Jy  sigma=1.006623
! Fit after  self-cal, rms=0.071665Jy  sigma=1.006547
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071665Jy  sigma=1.006547
! Fit after  self-cal, rms=0.070378Jy  sigma=0.970515
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070378Jy  sigma=0.970515
! Fit after  self-cal, rms=0.070379Jy  sigma=0.970488
! Inverting map and beam 
! Estimated beam: bmin=3.445 mas, bmaj=8.637 mas, bpa=-1.286 degrees
! Estimated noise=0.76905 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000571579 Jy
! Component: 100  -  total flux cleaned = 0.000642333 Jy
! Component: 150  -  total flux cleaned = 0.0007089 Jy
! Component: 200  -  total flux cleaned = 0.000771891 Jy
! Total flux subtracted in 200 components = 0.000771891 Jy
! Clean residual min=-0.003804 max=0.004078 Jy/beam
! Clean residual mean=-0.000061 rms=0.001011 Jy/beam
! Combined flux in latest and established models = 0.376326 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 104 components and 0.376326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070351Jy  sigma=0.969958
! Fit after  self-cal, rms=0.070345Jy  sigma=0.969927
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.015 mas, bmaj=23.34 mas, bpa=4.562 degrees
! Estimated noise=0.941785 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121981 Jy
! Component: 100  -  total flux cleaned = 0.00121493 Jy
! Component: 150  -  total flux cleaned = 0.00120923 Jy
! Component: 200  -  total flux cleaned = 0.00120323 Jy
! Total flux subtracted in 200 components = 0.00120323 Jy
! Clean residual min=-0.004249 max=0.003244 Jy/beam
! Clean residual mean=-0.000112 rms=0.001236 Jy/beam
! Combined flux in latest and established models = 0.377529 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 122 components and 0.377529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070367Jy  sigma=0.970510
! Fit after  self-cal, rms=0.070337Jy  sigma=0.970083
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.431 mas, bmaj=6.303 mas, bpa=-1.531 degrees
! Estimated noise=1.32714 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.206871 Jy
! Component: 100  -  total flux cleaned = 0.280454 Jy
! Component: 150  -  total flux cleaned = 0.319386 Jy
! Component: 200  -  total flux cleaned = 0.341196 Jy
! Total flux subtracted in 200 components = 0.341196 Jy
! Clean residual min=-0.006080 max=0.012199 Jy/beam
! Clean residual mean=-0.000038 rms=0.001857 Jy/beam
! Combined flux in latest and established models = 0.341196 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 52 model components to the UV plane model.
! The established model now contains 52 components and 0.341196 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.445 mas, bmaj=8.637 mas, bpa=-1.286 degrees
! Estimated noise=0.76905 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3, -2.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0233223 Jy
! Component: 100  -  total flux cleaned = 0.0320287 Jy
! Component: 150  -  total flux cleaned = 0.0358655 Jy
! Component: 200  -  total flux cleaned = 0.0369897 Jy
! Total flux subtracted in 200 components = 0.0369897 Jy
! Clean residual min=-0.003672 max=0.002995 Jy/beam
! Clean residual mean=-0.000070 rms=0.000907 Jy/beam
! Combined flux in latest and established models = 0.378186 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 112 components and 0.378186 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.015 mas, bmaj=23.34 mas, bpa=4.562 degrees
! Estimated noise=0.941785 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000722723 Jy
! Component: 100  -  total flux cleaned = 0.000661733 Jy
! Component: 150  -  total flux cleaned = 0.000611176 Jy
! Component: 200  -  total flux cleaned = 0.00058929 Jy
! Total flux subtracted in 200 components = 0.00058929 Jy
! Clean residual min=-0.004207 max=0.003204 Jy/beam
! Clean residual mean=-0.000123 rms=0.001187 Jy/beam
! Combined flux in latest and established models = 0.378775 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 128 components and 0.378775 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.445 mas, bmaj=8.637 mas, bpa=-1.286 degrees
! Estimated noise=0.76905 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152808 Jy
! Component: 100  -  total flux cleaned = 0.000154136 Jy
! Component: 150  -  total flux cleaned = 0.00015444 Jy
! Component: 200  -  total flux cleaned = 0.000109537 Jy
! Total flux subtracted in 200 components = 0.000109537 Jy
! Clean residual min=-0.003804 max=0.003001 Jy/beam
! Clean residual mean=-0.000069 rms=0.000898 Jy/beam
! Combined flux in latest and established models = 0.378885 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 138 components and 0.378885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069815Jy  sigma=0.961275
! Fit after  self-cal, rms=0.069666Jy  sigma=0.960284
wmodel J1812-2836_S_2005_05_12_yyk\_map.mod
! Writing 138 model components to file: J1812-2836_S_2005_05_12_yyk_map.mod
wobs J1812-2836_S_2005_05_12_yyk\_uvs.fits
! Writing UV FITS file: J1812-2836_S_2005_05_12_yyk_uvs.fits
wwins J1812-2836_S_2005_05_12_yyk\_map.win
! wwins: Wrote 3 windows to J1812-2836_S_2005_05_12_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000943922 Jy
! Component: 100  -  total flux cleaned = -0.0011048 Jy
! Component: 150  -  total flux cleaned = -0.00134993 Jy
! Component: 200  -  total flux cleaned = -0.001755 Jy
! Component: 250  -  total flux cleaned = -0.00214122 Jy
! Component: 300  -  total flux cleaned = -0.00242899 Jy
! Component: 350  -  total flux cleaned = -0.00270512 Jy
! Component: 400  -  total flux cleaned = -0.0030102 Jy
! Component: 450  -  total flux cleaned = -0.00323162 Jy
! Component: 500  -  total flux cleaned = -0.00355272 Jy
! Component: 550  -  total flux cleaned = -0.00372489 Jy
! Component: 600  -  total flux cleaned = -0.00389272 Jy
! Component: 650  -  total flux cleaned = -0.00408906 Jy
! Component: 700  -  total flux cleaned = -0.00418507 Jy
! Component: 750  -  total flux cleaned = -0.00437267 Jy
! Component: 800  -  total flux cleaned = -0.00461563 Jy
! Component: 850  -  total flux cleaned = -0.00470404 Jy
! Component: 900  -  total flux cleaned = -0.00476223 Jy
! Component: 950  -  total flux cleaned = -0.00487599 Jy
! Component: 1000  -  total flux cleaned = -0.0050438 Jy
! Component: 1050  -  total flux cleaned = -0.0052077 Jy
! Component: 1100  -  total flux cleaned = -0.00526105 Jy
! Component: 1150  -  total flux cleaned = -0.00539243 Jy
! Component: 1200  -  total flux cleaned = -0.00546974 Jy
! Component: 1250  -  total flux cleaned = -0.00552021 Jy
! Component: 1300  -  total flux cleaned = -0.005571 Jy
! Component: 1350  -  total flux cleaned = -0.00576681 Jy
! Component: 1400  -  total flux cleaned = -0.00588687 Jy
! Component: 1450  -  total flux cleaned = -0.00598165 Jy
! Component: 1500  -  total flux cleaned = -0.00614524 Jy
! Component: 1550  -  total flux cleaned = -0.00630624 Jy
! Component: 1600  -  total flux cleaned = -0.00641972 Jy
! Component: 1650  -  total flux cleaned = -0.00657679 Jy
! Component: 1700  -  total flux cleaned = -0.00677632 Jy
! Component: 1750  -  total flux cleaned = -0.00686379 Jy
! Component: 1800  -  total flux cleaned = -0.00699392 Jy
! Component: 1850  -  total flux cleaned = -0.00716504 Jy
! Component: 1900  -  total flux cleaned = -0.00727125 Jy
! Component: 1950  -  total flux cleaned = -0.00745994 Jy
! Component: 2000  -  total flux cleaned = -0.00762581 Jy
! Total flux subtracted in 2048 components = -0.00779019 Jy
! Clean residual min=-0.001203 max=0.001209 Jy/beam
! Clean residual mean=-0.000047 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.371095 Jy
keep
! Adding 132 model components to the UV plane model.
! The established model now contains 270 components and 0.371095 Jy
![Exited script file: muppet]
wmap "J1812-2836_S_2005_05_12_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.445 x 8.637 at -1.286 degrees (North through East)
! Clean map  min=-0.0028057  max=0.25242 Jy/beam
! Writing clean map to FITS file: J1812-2836_S_2005_05_12_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.252417 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000431082 
device "J1812-2836_S_2005_05_12_yyk\_map.eps/VPS"
! Attempting to open device: 'J1812-2836_S_2005_05_12_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.512344 0.512344 1.02469 2.04938 4.09875 8.1975 16.395 32.79 65.58
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0012 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.252 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.445 x 8.637 at -1.286 degrees (North through East)
! Clean map  min=-0.0028057  max=0.25242 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1812-2836_S_2005_05_12_yyk\_map.gif/gif"
! Attempting to open device: 'J1812-2836_S_2005_05_12_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1812-2836_S_2005_05_12_yyk_uvs.log closed on Sat Oct  8 17:34:47 2005