! Started logfile: J1743-0350_S_2005_06_30_yyk_uvs.log on Sat Oct 8 17:33:02 2005 obs J1743-0350_S_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J1743-0350_S_2005_06_30_yyk_uve.fits ! AN table 1: 6 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.774074 visibilities/baseline/integration-bin. ! Found source: J1743-0350 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1469 lines of history. ! ! Reading 836 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1743-0350_S_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 3.49272 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.03 mas, bmaj=6.611 mas, bpa=-2.556 degrees ! Estimated noise=1.90216 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.86047 Jy ! Component: 100 - total flux cleaned = 3.32757 Jy ! Total flux subtracted in 100 components = 3.32757 Jy ! Clean residual min=-0.123589 max=0.145726 Jy/beam ! Clean residual mean=0.001058 rms=0.037840 Jy/beam ! Combined flux in latest and established models = 3.32757 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 3.32757 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.611458Jy sigma=11.119480 ! Fit after self-cal, rms=0.611313Jy sigma=11.118235 ! Inverting map and beam ! Estimated beam: bmin=3.03 mas, bmaj=6.611 mas, bpa=-2.556 degrees ! Estimated noise=1.90216 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.687 mas, bmaj=7.704 mas, bpa=-2.761 degrees ! Estimated noise=1.39561 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.188315 Jy ! Component: 100 - total flux cleaned = 0.246779 Jy ! Component: 150 - total flux cleaned = 0.26953 Jy ! Component: 200 - total flux cleaned = 0.28609 Jy ! Total flux subtracted in 200 components = 0.28609 Jy ! Clean residual min=-0.116189 max=0.132652 Jy/beam ! Clean residual mean=-0.001714 rms=0.038592 Jy/beam ! Combined flux in latest and established models = 3.61366 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 36 components and 3.61366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.567812Jy sigma=10.336563 ! Fit after self-cal, rms=0.567785Jy sigma=10.336397 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.687 x 7.704 at -2.761 degrees (North through East) ! Clean map min=-0.11149 max=3.1797 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0219 ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.02 HN 1.02 KP 0.97 ! LA 1.08 MK 0.93 NL 0.94 OV 0.98 ! PT 1.08 SC 0.88 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00448 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.02 KP 1.00 ! LA 1.04 MK 1.01 NL 0.97 OV 1.00 ! PT 1.05 SC 0.93 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.954458 ! Telescope amplitude corrections in sub-array 1: ! BR 1.54 FD 0.89 HN 0.98 KP 0.96 ! LA 0.93 MK 1.11 NL 1.02 OV 1.00 ! PT 1.10 SC 0.95 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.0838 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.91 HN 0.88 KP 0.87 ! LA 0.78 MK 1.09 NL 0.93 OV 0.82 ! PT 0.97 SC 1.01 ! ! ! Fit before self-cal, rms=0.567785Jy sigma=10.336397 ! Fit after self-cal, rms=0.360115Jy sigma=5.772904 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360115Jy sigma=5.772904 ! Fit after self-cal, rms=0.360109Jy sigma=5.772872 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.746 mas, bmaj=7.882 mas, bpa=-1.354 degrees ! Estimated noise=1.41487 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0343788 Jy ! Component: 100 - total flux cleaned = 0.0301973 Jy ! Component: 150 - total flux cleaned = 0.027939 Jy ! Component: 200 - total flux cleaned = 0.0250434 Jy ! Total flux subtracted in 200 components = 0.0250434 Jy ! Clean residual min=-0.028780 max=0.023334 Jy/beam ! Clean residual mean=0.000461 rms=0.007633 Jy/beam ! Combined flux in latest and established models = 3.6387 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 3.6387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341750Jy sigma=5.616076 ! Fit after self-cal, rms=0.341703Jy sigma=5.615799 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341703Jy sigma=5.615799 ! Fit after self-cal, rms=0.340602Jy sigma=5.595865 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00262268 Jy ! Component: 100 - total flux cleaned = -0.00476001 Jy ! Component: 150 - total flux cleaned = -0.00601996 Jy ! Component: 200 - total flux cleaned = -0.00773556 Jy ! Total flux subtracted in 200 components = -0.00773556 Jy ! Clean residual min=-0.025641 max=0.023302 Jy/beam ! Clean residual mean=0.000555 rms=0.007236 Jy/beam ! Combined flux in latest and established models = 3.63097 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 3.63097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.336762Jy sigma=5.563576 ! Fit after self-cal, rms=0.336871Jy sigma=5.562037 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.746 x 7.882 at -1.354 degrees (North through East) ! Clean map min=-0.024607 max=3.274 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.336871Jy sigma=5.562037 ! Fit after self-cal, rms=0.120007Jy sigma=1.610185 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120007Jy sigma=1.610185 ! Fit after self-cal, rms=0.120169Jy sigma=1.609709 ! Inverting map and beam ! Estimated beam: bmin=3.751 mas, bmaj=7.93 mas, bpa=-1.638 degrees ! Estimated noise=1.4113 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.015662 Jy ! Component: 100 - total flux cleaned = -0.0170408 Jy ! Component: 150 - total flux cleaned = -0.0188376 Jy ! Component: 200 - total flux cleaned = -0.0203856 Jy ! Total flux subtracted in 200 components = -0.0203856 Jy ! Clean residual min=-0.018913 max=0.016271 Jy/beam ! Clean residual mean=0.000100 rms=0.004975 Jy/beam ! Combined flux in latest and established models = 3.61058 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 51 components and 3.61058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113505Jy sigma=1.492177 ! Fit after self-cal, rms=0.113534Jy sigma=1.491825 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113534Jy sigma=1.491825 ! Fit after self-cal, rms=0.106212Jy sigma=1.358386 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106212Jy sigma=1.358386 ! Fit after self-cal, rms=0.106238Jy sigma=1.358374 ! Inverting map and beam ! Estimated beam: bmin=3.755 mas, bmaj=7.961 mas, bpa=-1.841 degrees ! Estimated noise=1.4116 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0112523 Jy ! Component: 100 - total flux cleaned = -0.0127388 Jy ! Component: 150 - total flux cleaned = -0.0140183 Jy ! Component: 200 - total flux cleaned = -0.0151102 Jy ! Total flux subtracted in 200 components = -0.0151102 Jy ! Clean residual min=-0.015838 max=0.014153 Jy/beam ! Clean residual mean=0.000074 rms=0.004211 Jy/beam ! Combined flux in latest and established models = 3.59547 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 3.59547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102122Jy sigma=1.286475 ! Fit after self-cal, rms=0.102103Jy sigma=1.286265 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.194 mas, bmaj=14.26 mas, bpa=16.65 degrees ! Estimated noise=1.70836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00377597 Jy ! Component: 100 - total flux cleaned = -0.00419141 Jy ! Component: 150 - total flux cleaned = -0.00448744 Jy ! Component: 200 - total flux cleaned = -0.00485133 Jy ! Total flux subtracted in 200 components = -0.00485133 Jy ! Clean residual min=-0.018100 max=0.014195 Jy/beam ! Clean residual mean=0.000244 rms=0.005428 Jy/beam ! Combined flux in latest and established models = 3.59062 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 57 components and 3.59062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101974Jy sigma=1.283231 ! Fit after self-cal, rms=0.101954Jy sigma=1.283051 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=6.704 mas, bpa=-2.25 degrees ! Estimated noise=1.88803 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.83947 Jy ! Component: 100 - total flux cleaned = 3.27788 Jy ! Component: 150 - total flux cleaned = 3.42376 Jy ! Component: 200 - total flux cleaned = 3.49635 Jy ! Total flux subtracted in 200 components = 3.49635 Jy ! Clean residual min=-0.022609 max=0.029623 Jy/beam ! Clean residual mean=0.000528 rms=0.006450 Jy/beam ! Combined flux in latest and established models = 3.49635 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 3.49635 Jy ! Inverting map and beam ! Estimated beam: bmin=3.755 mas, bmaj=7.961 mas, bpa=-1.841 degrees ! Estimated noise=1.4116 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.5, -7.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0500606 Jy ! Component: 100 - total flux cleaned = 0.0739732 Jy ! Component: 150 - total flux cleaned = 0.0820267 Jy ! Component: 200 - total flux cleaned = 0.0837657 Jy ! Total flux subtracted in 200 components = 0.0837657 Jy ! Clean residual min=-0.013313 max=0.014060 Jy/beam ! Clean residual mean=0.000253 rms=0.004205 Jy/beam ! Combined flux in latest and established models = 3.58011 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 58 components and 3.58011 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.194 mas, bmaj=14.26 mas, bpa=16.65 degrees ! Estimated noise=1.70836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00676867 Jy ! Component: 100 - total flux cleaned = 0.00741227 Jy ! Component: 150 - total flux cleaned = 0.00776554 Jy ! Component: 200 - total flux cleaned = 0.00808806 Jy ! Total flux subtracted in 200 components = 0.00808806 Jy ! Clean residual min=-0.016824 max=0.012511 Jy/beam ! Clean residual mean=0.000291 rms=0.005267 Jy/beam ! Combined flux in latest and established models = 3.5882 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 80 components and 3.5882 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.755 mas, bmaj=7.961 mas, bpa=-1.841 degrees ! Estimated noise=1.4116 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00251256 Jy ! Component: 100 - total flux cleaned = -0.00216215 Jy ! Component: 150 - total flux cleaned = -0.00216276 Jy ! Component: 200 - total flux cleaned = -0.0024106 Jy ! Total flux subtracted in 200 components = -0.0024106 Jy ! Clean residual min=-0.013430 max=0.011547 Jy/beam ! Clean residual mean=0.000189 rms=0.003899 Jy/beam ! Combined flux in latest and established models = 3.58579 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 96 components and 3.58579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098144Jy sigma=1.230018 ! Fit after self-cal, rms=0.098023Jy sigma=1.225596 wmodel J1743-0350_S_2005_06_30_yyk\_map.mod ! Writing 96 model components to file: J1743-0350_S_2005_06_30_yyk_map.mod wobs J1743-0350_S_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J1743-0350_S_2005_06_30_yyk_uvs.fits wwins J1743-0350_S_2005_06_30_yyk\_map.win ! wwins: Wrote 2 windows to J1743-0350_S_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00367574 Jy ! Component: 100 - total flux cleaned = -0.00552086 Jy ! Component: 150 - total flux cleaned = -0.00702691 Jy ! Component: 200 - total flux cleaned = -0.00773386 Jy ! Component: 250 - total flux cleaned = -0.00839484 Jy ! Component: 300 - total flux cleaned = -0.00901153 Jy ! Component: 350 - total flux cleaned = -0.00959923 Jy ! Component: 400 - total flux cleaned = -0.0103019 Jy ! Component: 450 - total flux cleaned = -0.0108432 Jy ! Component: 500 - total flux cleaned = -0.0120077 Jy ! Component: 550 - total flux cleaned = -0.01238 Jy ! Component: 600 - total flux cleaned = -0.0130972 Jy ! Component: 650 - total flux cleaned = -0.0135571 Jy ! Component: 700 - total flux cleaned = -0.0138898 Jy ! Component: 750 - total flux cleaned = -0.0142135 Jy ! Component: 800 - total flux cleaned = -0.014525 Jy ! Component: 850 - total flux cleaned = -0.0150287 Jy ! Component: 900 - total flux cleaned = -0.0155133 Jy ! Component: 950 - total flux cleaned = -0.0156999 Jy ! Component: 1000 - total flux cleaned = -0.0159747 Jy ! Component: 1050 - total flux cleaned = -0.0164191 Jy ! Component: 1100 - total flux cleaned = -0.0170218 Jy ! Component: 1150 - total flux cleaned = -0.0176054 Jy ! Component: 1200 - total flux cleaned = -0.018176 Jy ! Component: 1250 - total flux cleaned = -0.0186529 Jy ! Component: 1300 - total flux cleaned = -0.0189619 Jy ! Component: 1350 - total flux cleaned = -0.0192638 Jy ! Component: 1400 - total flux cleaned = -0.0197059 Jy ! Component: 1450 - total flux cleaned = -0.0199911 Jy ! Component: 1500 - total flux cleaned = -0.0201304 Jy ! Component: 1550 - total flux cleaned = -0.0205398 Jy ! Component: 1600 - total flux cleaned = -0.0208062 Jy ! Component: 1650 - total flux cleaned = -0.0211948 Jy ! Component: 1700 - total flux cleaned = -0.0215726 Jy ! Component: 1750 - total flux cleaned = -0.0219414 Jy ! Component: 1800 - total flux cleaned = -0.0221219 Jy ! Component: 1850 - total flux cleaned = -0.0221817 Jy ! Component: 1900 - total flux cleaned = -0.0224125 Jy ! Component: 1950 - total flux cleaned = -0.022413 Jy ! Component: 2000 - total flux cleaned = -0.0226902 Jy ! Total flux subtracted in 2048 components = -0.0227971 Jy ! Clean residual min=-0.004238 max=0.002963 Jy/beam ! Clean residual mean=-0.000044 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 3.563 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 230 components and 3.563 Jy ![Exited script file: muppet] wmap "J1743-0350_S_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.755 x 7.961 at -1.841 degrees (North through East) ! Clean map min=-0.0092705 max=3.3043 Jy/beam ! Writing clean map to FITS file: J1743-0350_S_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.30435 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00112672 device "J1743-0350_S_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1743-0350_S_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.102294 0.102294 0.204589 0.409177 0.818354 1.63671 3.27342 6.54683 13.0937 26.1873 52.3747 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak=",int(peak_flux*1000)/1000 ! peak= 3.304 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.755 x 7.961 at -1.841 degrees (North through East) ! Clean map min=-0.0092705 max=3.3043 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1743-0350_S_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1743-0350_S_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1743-0350_S_2005_06_30_yyk_uvs.log closed on Sat Oct 8 17:33:06 2005