! Started logfile: J1742-1517_S_2005_06_30_yyk_uvs.log on Sat Oct 8 17:32:45 2005 obs J1742-1517_S_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J1742-1517_S_2005_06_30_yyk_uve.fits ! AN table 1: 19 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.797661 visibilities/baseline/integration-bin. ! Found source: J1742-1517 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1469 lines of history. ! ! Reading 2728 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1742-1517_S_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.151461 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.593 mas, bmaj=6.552 mas, bpa=-2.478 degrees ! Estimated noise=1.49317 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0650069 Jy ! Component: 100 - total flux cleaned = 0.0853493 Jy ! Total flux subtracted in 100 components = 0.0853493 Jy ! Clean residual min=-0.012620 max=0.041155 Jy/beam ! Clean residual mean=0.000412 rms=0.004564 Jy/beam ! Combined flux in latest and established models = 0.0853493 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0853493 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.126651Jy sigma=1.972473 ! Fit after self-cal, rms=0.126595Jy sigma=1.808185 ! Inverting map and beam ! Estimated beam: bmin=2.593 mas, bmaj=6.552 mas, bpa=-2.478 degrees ! Estimated noise=1.49317 mJy/beam. ! Added new window around map position (6, -37). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.035802 Jy ! Component: 100 - total flux cleaned = 0.0534343 Jy ! Total flux subtracted in 100 components = 0.0534343 Jy ! Clean residual min=-0.010013 max=0.015393 Jy/beam ! Clean residual mean=0.000249 rms=0.003330 Jy/beam ! Combined flux in latest and established models = 0.138784 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 33 components and 0.138784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116513Jy sigma=1.703498 ! Fit after self-cal, rms=0.113549Jy sigma=1.666270 ! Inverting map ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.021178 Jy ! Component: 100 - total flux cleaned = 0.0324869 Jy ! Total flux subtracted in 100 components = 0.0324869 Jy ! Clean residual min=-0.009891 max=0.011723 Jy/beam ! Clean residual mean=0.000148 rms=0.002817 Jy/beam ! Combined flux in latest and established models = 0.171271 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 43 components and 0.171271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109187Jy sigma=1.624117 ! Fit after self-cal, rms=0.108794Jy sigma=1.621914 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.623 mas, bmaj=8.864 mas, bpa=-1.615 degrees ! Estimated noise=0.869274 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221426 Jy ! Component: 100 - total flux cleaned = 0.0281993 Jy ! Component: 150 - total flux cleaned = 0.0324966 Jy ! Component: 200 - total flux cleaned = 0.0344597 Jy ! Total flux subtracted in 200 components = 0.0344597 Jy ! Clean residual min=-0.021503 max=0.020281 Jy/beam ! Clean residual mean=0.000186 rms=0.009465 Jy/beam ! Combined flux in latest and established models = 0.20573 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.20573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109368Jy sigma=1.549752 ! Fit after self-cal, rms=0.108864Jy sigma=1.543752 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.623 x 8.864 at -1.615 degrees (North through East) ! Clean map min=-0.020701 max=0.08572 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.108864Jy sigma=1.543752 ! Fit after self-cal, rms=0.108864Jy sigma=1.543752 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108864Jy sigma=1.543752 ! Fit after self-cal, rms=0.108695Jy sigma=1.540971 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.623 mas, bmaj=8.864 mas, bpa=-1.615 degrees ! Estimated noise=0.869274 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000776266 Jy ! Component: 100 - total flux cleaned = 0.000793274 Jy ! Component: 150 - total flux cleaned = 0.00125386 Jy ! Component: 200 - total flux cleaned = 0.00139914 Jy ! Total flux subtracted in 200 components = 0.00139914 Jy ! Clean residual min=-0.020764 max=0.019403 Jy/beam ! Clean residual mean=0.000171 rms=0.009075 Jy/beam ! Combined flux in latest and established models = 0.207129 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 61 components and 0.207129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109255Jy sigma=1.534189 ! Fit after self-cal, rms=0.108929Jy sigma=1.531902 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108929Jy sigma=1.531902 ! Fit after self-cal, rms=0.103867Jy sigma=1.413361 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00663109 Jy ! Component: 100 - total flux cleaned = 0.00878874 Jy ! Component: 150 - total flux cleaned = 0.00895685 Jy ! Component: 200 - total flux cleaned = 0.00883863 Jy ! Total flux subtracted in 200 components = 0.00883863 Jy ! Clean residual min=-0.018061 max=0.018544 Jy/beam ! Clean residual mean=0.000109 rms=0.008470 Jy/beam ! Combined flux in latest and established models = 0.215968 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.215968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104372Jy sigma=1.403713 ! Fit after self-cal, rms=0.104377Jy sigma=1.394980 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.623 x 8.864 at -1.615 degrees (North through East) ! Clean map min=-0.017776 max=0.090503 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.979 mas, bmaj=16.35 mas, bpa=-4.555 degrees ! Estimated noise=1.05032 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00446095 Jy ! Component: 100 - total flux cleaned = 0.00332969 Jy ! Component: 150 - total flux cleaned = 0.0033104 Jy ! Component: 200 - total flux cleaned = 0.00329974 Jy ! Total flux subtracted in 200 components = 0.00329974 Jy ! Clean residual min=-0.019679 max=0.019413 Jy/beam ! Clean residual mean=0.000172 rms=0.008347 Jy/beam ! Combined flux in latest and established models = 0.219268 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 68 components and 0.219268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106745Jy sigma=1.398996 ! Fit after self-cal, rms=0.106605Jy sigma=1.394042 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.593 mas, bmaj=6.552 mas, bpa=-2.478 degrees ! Estimated noise=1.49317 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0829462 Jy ! Component: 100 - total flux cleaned = 0.122564 Jy ! Component: 150 - total flux cleaned = 0.147611 Jy ! Component: 200 - total flux cleaned = 0.164221 Jy ! Total flux subtracted in 200 components = 0.164221 Jy ! Clean residual min=-0.008629 max=0.011636 Jy/beam ! Clean residual mean=0.000158 rms=0.002821 Jy/beam ! Combined flux in latest and established models = 0.164221 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.164221 Jy ! Inverting map and beam ! Estimated beam: bmin=3.623 mas, bmaj=8.864 mas, bpa=-1.615 degrees ! Estimated noise=0.869274 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0305357 Jy ! Component: 100 - total flux cleaned = 0.0380209 Jy ! Component: 150 - total flux cleaned = 0.0424806 Jy ! Component: 200 - total flux cleaned = 0.0460211 Jy ! Total flux subtracted in 200 components = 0.0460211 Jy ! Clean residual min=-0.018096 max=0.019356 Jy/beam ! Clean residual mean=0.000168 rms=0.008618 Jy/beam ! Combined flux in latest and established models = 0.210242 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 67 components and 0.210242 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.979 mas, bmaj=16.35 mas, bpa=-4.555 degrees ! Estimated noise=1.05032 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00825105 Jy ! Component: 100 - total flux cleaned = 0.00830651 Jy ! Component: 150 - total flux cleaned = 0.00863938 Jy ! Component: 200 - total flux cleaned = 0.00864814 Jy ! Total flux subtracted in 200 components = 0.00864814 Jy ! Clean residual min=-0.019952 max=0.020565 Jy/beam ! Clean residual mean=0.000192 rms=0.008586 Jy/beam ! Combined flux in latest and established models = 0.21889 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 72 components and 0.21889 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.623 mas, bmaj=8.864 mas, bpa=-1.615 degrees ! Estimated noise=0.869274 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00229639 Jy ! Component: 100 - total flux cleaned = -0.00205484 Jy ! Component: 150 - total flux cleaned = -0.00167817 Jy ! Component: 200 - total flux cleaned = -0.00137001 Jy ! Total flux subtracted in 200 components = -0.00137001 Jy ! Clean residual min=-0.017308 max=0.017933 Jy/beam ! Clean residual mean=0.000110 rms=0.007881 Jy/beam ! Combined flux in latest and established models = 0.21752 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 86 components and 0.21752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105474Jy sigma=1.387849 ! Fit after self-cal, rms=0.105314Jy sigma=1.384267 wmodel J1742-1517_S_2005_06_30_yyk\_map.mod ! Writing 86 model components to file: J1742-1517_S_2005_06_30_yyk_map.mod wobs J1742-1517_S_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J1742-1517_S_2005_06_30_yyk_uvs.fits wwins J1742-1517_S_2005_06_30_yyk\_map.win ! wwins: Wrote 2 windows to J1742-1517_S_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013862 Jy ! Component: 100 - total flux cleaned = 0.00195938 Jy ! Component: 150 - total flux cleaned = 0.00168131 Jy ! Component: 200 - total flux cleaned = 0.00167762 Jy ! Component: 250 - total flux cleaned = 0.00236603 Jy ! Component: 300 - total flux cleaned = 0.00215301 Jy ! Component: 350 - total flux cleaned = 0.00216421 Jy ! Component: 400 - total flux cleaned = 0.00292143 Jy ! Component: 450 - total flux cleaned = 0.0027405 Jy ! Component: 500 - total flux cleaned = 0.00324848 Jy ! Component: 550 - total flux cleaned = 0.00388397 Jy ! Component: 600 - total flux cleaned = 0.00387078 Jy ! Component: 650 - total flux cleaned = 0.00386453 Jy ! Component: 700 - total flux cleaned = 0.00440055 Jy ! Component: 750 - total flux cleaned = 0.00438725 Jy ! Component: 800 - total flux cleaned = 0.0047603 Jy ! Component: 850 - total flux cleaned = 0.00523807 Jy ! Component: 900 - total flux cleaned = 0.00546992 Jy ! Component: 950 - total flux cleaned = 0.0061301 Jy ! Component: 1000 - total flux cleaned = 0.00602589 Jy ! Component: 1050 - total flux cleaned = 0.00582671 Jy ! Component: 1100 - total flux cleaned = 0.00622854 Jy ! Component: 1150 - total flux cleaned = 0.00671181 Jy ! Component: 1200 - total flux cleaned = 0.00727071 Jy ! Component: 1250 - total flux cleaned = 0.00745541 Jy ! Component: 1300 - total flux cleaned = 0.00808035 Jy ! Component: 1350 - total flux cleaned = 0.00903473 Jy ! Component: 1400 - total flux cleaned = 0.00954208 Jy ! Component: 1450 - total flux cleaned = 0.0103693 Jy ! Component: 1500 - total flux cleaned = 0.0109335 Jy ! Component: 1550 - total flux cleaned = 0.0112486 Jy ! Component: 1600 - total flux cleaned = 0.0118671 Jy ! Component: 1650 - total flux cleaned = 0.0123969 Jy ! Component: 1700 - total flux cleaned = 0.013063 Jy ! Component: 1750 - total flux cleaned = 0.0135711 Jy ! Component: 1800 - total flux cleaned = 0.0137131 Jy ! Component: 1850 - total flux cleaned = 0.0139246 Jy ! Component: 1900 - total flux cleaned = 0.0141325 Jy ! Component: 1950 - total flux cleaned = 0.0142684 Jy ! Component: 2000 - total flux cleaned = 0.0144015 Jy ! Total flux subtracted in 2048 components = 0.0146659 Jy ! Clean residual min=-0.003282 max=0.003995 Jy/beam ! Clean residual mean=0.000032 rms=0.001623 Jy/beam ! Combined flux in latest and established models = 0.232186 Jy keep ! Adding 231 model components to the UV plane model. ! The established model now contains 316 components and 0.232186 Jy ![Exited script file: muppet] wmap "J1742-1517_S_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.623 x 8.864 at -1.615 degrees (North through East) ! Clean map min=-0.0081696 max=0.083967 Jy/beam ! Writing clean map to FITS file: J1742-1517_S_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0839666 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00176084 device "J1742-1517_S_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1742-1517_S_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -6.29121 6.29121 12.5824 25.1648 50.3297 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0052 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.083 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.623 x 8.864 at -1.615 degrees (North through East) ! Clean map min=-0.0081696 max=0.083967 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1742-1517_S_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1742-1517_S_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1742-1517_S_2005_06_30_yyk_uvs.log closed on Sat Oct 8 17:32:49 2005