! Started logfile: J1740-0811_X_2005_06_01_yyk_uvs.log on Sat Oct 8 17:32:33 2005 obs J1740-0811_X_2005_06_01_yyk_uve.fits ! Reading UV FITS file: J1740-0811_X_2005_06_01_yyk_uve.fits ! AN table 1: 9 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.903704 visibilities/baseline/integration-bin. ! Found source: J1740-0811 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1617 lines of history. ! ! Reading 1464 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1740-0811_X_2005_06_01_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.280176 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6969 mas, bmaj=1.762 mas, bpa=-2.063 degrees ! Estimated noise=1.40095 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.224777 Jy ! Component: 100 - total flux cleaned = 0.259573 Jy ! Total flux subtracted in 100 components = 0.259573 Jy ! Clean residual min=-0.007873 max=0.008940 Jy/beam ! Clean residual mean=0.000001 rms=0.002080 Jy/beam ! Combined flux in latest and established models = 0.259573 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.259573 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.089385Jy sigma=1.212242 ! Fit after self-cal, rms=0.089139Jy sigma=1.206133 ! Inverting map and beam ! Estimated beam: bmin=0.6969 mas, bmaj=1.762 mas, bpa=-2.063 degrees ! Estimated noise=1.40095 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8892 mas, bmaj=2.128 mas, bpa=-1.913 degrees ! Estimated noise=1.01747 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116927 Jy ! Component: 100 - total flux cleaned = 0.0155124 Jy ! Component: 150 - total flux cleaned = 0.0169385 Jy ! Component: 200 - total flux cleaned = 0.0169774 Jy ! Total flux subtracted in 200 components = 0.0169774 Jy ! Clean residual min=-0.004819 max=0.004701 Jy/beam ! Clean residual mean=-0.000013 rms=0.001360 Jy/beam ! Combined flux in latest and established models = 0.27655 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 30 components and 0.27655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087895Jy sigma=1.180945 ! Fit after self-cal, rms=0.087876Jy sigma=1.180765 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8892 x 2.128 at -1.913 degrees (North through East) ! Clean map min=-0.0044243 max=0.26219 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00597 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.01 KP 1.00 ! LA 1.01 MK 0.99 NL 0.99 OV 1.05 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00491 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.03 KP 0.94 ! LA 1.02 MK 1.00 NL 0.99 OV 1.03 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.02355 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 0.90 KP 0.90 ! LA 0.99 MK 1.05 NL 0.93 OV 1.02 ! PT 1.02 SC 0.92 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.960185 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.05 HN 1.01 KP 0.92 ! LA 1.01 MK 1.03 NL 0.97 OV 1.11 ! PT 1.08 SC 1.21 ! ! ! Fit before self-cal, rms=0.087876Jy sigma=1.180765 ! Fit after self-cal, rms=0.085362Jy sigma=1.147314 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085362Jy sigma=1.147314 ! Fit after self-cal, rms=0.085354Jy sigma=1.147203 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8944 mas, bmaj=2.136 mas, bpa=-1.892 degrees ! Estimated noise=1.01447 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000851929 Jy ! Component: 100 - total flux cleaned = -0.000850987 Jy ! Component: 150 - total flux cleaned = -0.000826061 Jy ! Component: 200 - total flux cleaned = -0.000850423 Jy ! Total flux subtracted in 200 components = -0.000850423 Jy ! Clean residual min=-0.004372 max=0.004245 Jy/beam ! Clean residual mean=-0.000011 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 0.2757 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.2757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085358Jy sigma=1.146783 ! Fit after self-cal, rms=0.085342Jy sigma=1.146654 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085342Jy sigma=1.146654 ! Fit after self-cal, rms=0.081471Jy sigma=1.078553 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000764209 Jy ! Component: 100 - total flux cleaned = 0.000877946 Jy ! Component: 150 - total flux cleaned = 0.000878904 Jy ! Component: 200 - total flux cleaned = 0.000900733 Jy ! Total flux subtracted in 200 components = 0.000900733 Jy ! Clean residual min=-0.004049 max=0.004190 Jy/beam ! Clean residual mean=-0.000012 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.276601 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.276601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081447Jy sigma=1.078175 ! Fit after self-cal, rms=0.081453Jy sigma=1.069112 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8944 x 2.136 at -1.892 degrees (North through East) ! Clean map min=-0.0036909 max=0.26245 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081453Jy sigma=1.069112 ! Fit after self-cal, rms=0.081416Jy sigma=1.033992 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081416Jy sigma=1.033992 ! Fit after self-cal, rms=0.081704Jy sigma=1.032329 ! Inverting map and beam ! Estimated beam: bmin=0.8951 mas, bmaj=2.137 mas, bpa=-1.683 degrees ! Estimated noise=1.01232 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000139622 Jy ! Component: 100 - total flux cleaned = 0.000139786 Jy ! Component: 150 - total flux cleaned = 0.000138692 Jy ! Component: 200 - total flux cleaned = 0.000109461 Jy ! Total flux subtracted in 200 components = 0.000109461 Jy ! Clean residual min=-0.003867 max=0.003849 Jy/beam ! Clean residual mean=-0.000013 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.27671 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 47 components and 0.27671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081684Jy sigma=1.031745 ! Fit after self-cal, rms=0.081858Jy sigma=1.031336 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081858Jy sigma=1.031336 ! Fit after self-cal, rms=0.081306Jy sigma=0.998023 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081306Jy sigma=0.998023 ! Fit after self-cal, rms=0.081369Jy sigma=0.997881 ! Inverting map and beam ! Estimated beam: bmin=0.8947 mas, bmaj=2.134 mas, bpa=-1.494 degrees ! Estimated noise=1.01491 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149804 Jy ! Component: 100 - total flux cleaned = 0.00155368 Jy ! Component: 150 - total flux cleaned = 0.00153133 Jy ! Component: 200 - total flux cleaned = 0.00153228 Jy ! Total flux subtracted in 200 components = 0.00153228 Jy ! Clean residual min=-0.003828 max=0.003893 Jy/beam ! Clean residual mean=-0.000014 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.278243 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.278243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081343Jy sigma=0.997279 ! Fit after self-cal, rms=0.081386Jy sigma=0.997230 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.198 mas, bmaj=3.879 mas, bpa=-0.3783 degrees ! Estimated noise=1.30253 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.71589e-05 Jy ! Component: 100 - total flux cleaned = -0.000112539 Jy ! Component: 150 - total flux cleaned = -0.000186577 Jy ! Component: 200 - total flux cleaned = -0.000258343 Jy ! Total flux subtracted in 200 components = -0.000258343 Jy ! Clean residual min=-0.003752 max=0.003831 Jy/beam ! Clean residual mean=-0.000028 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.277984 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 51 components and 0.277984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081412Jy sigma=0.997640 ! Fit after self-cal, rms=0.081417Jy sigma=0.997462 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7032 mas, bmaj=1.768 mas, bpa=-1.943 degrees ! Estimated noise=1.40832 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.227325 Jy ! Component: 100 - total flux cleaned = 0.261201 Jy ! Component: 150 - total flux cleaned = 0.271456 Jy ! Component: 200 - total flux cleaned = 0.275557 Jy ! Total flux subtracted in 200 components = 0.275557 Jy ! Clean residual min=-0.005378 max=0.005384 Jy/beam ! Clean residual mean=-0.000011 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.275558 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.275558 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8947 mas, bmaj=2.134 mas, bpa=-1.494 degrees ! Estimated noise=1.01491 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220951 Jy ! Component: 100 - total flux cleaned = 0.00239988 Jy ! Component: 150 - total flux cleaned = 0.00257116 Jy ! Component: 200 - total flux cleaned = 0.00260115 Jy ! Total flux subtracted in 200 components = 0.00260115 Jy ! Clean residual min=-0.003869 max=0.003994 Jy/beam ! Clean residual mean=-0.000014 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.278159 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 0.278159 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.198 mas, bmaj=3.879 mas, bpa=-0.3783 degrees ! Estimated noise=1.30253 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -4.55531e-05 Jy ! Component: 100 - total flux cleaned = -0.000159654 Jy ! Component: 150 - total flux cleaned = -0.000246158 Jy ! Component: 200 - total flux cleaned = -0.000268508 Jy ! Total flux subtracted in 200 components = -0.000268508 Jy ! Clean residual min=-0.003760 max=0.003882 Jy/beam ! Clean residual mean=-0.000028 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.27789 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 32 components and 0.27789 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8947 mas, bmaj=2.134 mas, bpa=-1.494 degrees ! Estimated noise=1.01491 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.05065e-05 Jy ! Component: 100 - total flux cleaned = 0.000221455 Jy ! Component: 150 - total flux cleaned = 0.000249887 Jy ! Component: 200 - total flux cleaned = 0.000272121 Jy ! Total flux subtracted in 200 components = 0.000272121 Jy ! Clean residual min=-0.003842 max=0.003970 Jy/beam ! Clean residual mean=-0.000014 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.278162 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 40 components and 0.278162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081396Jy sigma=0.997151 ! Fit after self-cal, rms=0.081405Jy sigma=0.997107 wmodel J1740-0811_X_2005_06_01_yyk\_map.mod ! Writing 40 model components to file: J1740-0811_X_2005_06_01_yyk_map.mod wobs J1740-0811_X_2005_06_01_yyk\_uvs.fits ! Writing UV FITS file: J1740-0811_X_2005_06_01_yyk_uvs.fits wwins J1740-0811_X_2005_06_01_yyk\_map.win ! wwins: Wrote 1 windows to J1740-0811_X_2005_06_01_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.87206e-05 Jy ! Component: 100 - total flux cleaned = 1.73502e-05 Jy ! Component: 150 - total flux cleaned = 0.000327329 Jy ! Component: 200 - total flux cleaned = 0.000744868 Jy ! Component: 250 - total flux cleaned = 0.00114609 Jy ! Component: 300 - total flux cleaned = 0.00164406 Jy ! Component: 350 - total flux cleaned = 0.00196451 Jy ! Component: 400 - total flux cleaned = 0.00227686 Jy ! Component: 450 - total flux cleaned = 0.00253091 Jy ! Component: 500 - total flux cleaned = 0.00287666 Jy ! Component: 550 - total flux cleaned = 0.003116 Jy ! Component: 600 - total flux cleaned = 0.00325574 Jy ! Component: 650 - total flux cleaned = 0.00339337 Jy ! Component: 700 - total flux cleaned = 0.00366437 Jy ! Component: 750 - total flux cleaned = 0.00379771 Jy ! Component: 800 - total flux cleaned = 0.00405922 Jy ! Component: 850 - total flux cleaned = 0.0043153 Jy ! Component: 900 - total flux cleaned = 0.00452424 Jy ! Component: 950 - total flux cleaned = 0.00473004 Jy ! Component: 1000 - total flux cleaned = 0.00485212 Jy ! Component: 1050 - total flux cleaned = 0.00493246 Jy ! Component: 1100 - total flux cleaned = 0.00520714 Jy ! Component: 1150 - total flux cleaned = 0.00543892 Jy ! Component: 1200 - total flux cleaned = 0.00559081 Jy ! Component: 1250 - total flux cleaned = 0.00581469 Jy ! Component: 1300 - total flux cleaned = 0.00592518 Jy ! Component: 1350 - total flux cleaned = 0.00603441 Jy ! Component: 1400 - total flux cleaned = 0.00610615 Jy ! Component: 1450 - total flux cleaned = 0.00624709 Jy ! Component: 1500 - total flux cleaned = 0.00628139 Jy ! Component: 1550 - total flux cleaned = 0.00641868 Jy ! Component: 1600 - total flux cleaned = 0.00651939 Jy ! Component: 1650 - total flux cleaned = 0.00678581 Jy ! Component: 1700 - total flux cleaned = 0.00685049 Jy ! Component: 1750 - total flux cleaned = 0.00681777 Jy ! Component: 1800 - total flux cleaned = 0.00681845 Jy ! Component: 1850 - total flux cleaned = 0.00697785 Jy ! Component: 1900 - total flux cleaned = 0.00713503 Jy ! Component: 1950 - total flux cleaned = 0.00719734 Jy ! Component: 2000 - total flux cleaned = 0.0072587 Jy ! Total flux subtracted in 2048 components = 0.00725885 Jy ! Clean residual min=-0.001694 max=0.001736 Jy/beam ! Clean residual mean=-0.000009 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.285421 Jy keep ! Adding 148 model components to the UV plane model. ! The established model now contains 188 components and 0.285421 Jy ![Exited script file: muppet] wmap "J1740-0811_X_2005_06_01_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8947 x 2.134 at -1.494 degrees (North through East) ! Clean map min=-0.0028947 max=0.26251 Jy/beam ! Writing clean map to FITS file: J1740-0811_X_2005_06_01_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.262511 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00056663 device "J1740-0811_X_2005_06_01_yyk\_map.eps/VPS" ! Attempting to open device: 'J1740-0811_X_2005_06_01_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.64755 0.64755 1.2951 2.5902 5.1804 10.3608 20.7216 41.4432 82.8865 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.262 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8947 x 2.134 at -1.494 degrees (North through East) ! Clean map min=-0.0028947 max=0.26251 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1740-0811_X_2005_06_01_yyk\_map.gif/gif" ! Attempting to open device: 'J1740-0811_X_2005_06_01_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1740-0811_X_2005_06_01_yyk_uvs.log closed on Sat Oct 8 17:32:37 2005