! Started logfile: J1724-1443_S_2005_06_30_yyk_uvs.log on Sat Oct  8 17:31:30 2005
obs J1724-1443_S_2005_06_30_yyk_uve.fits
! Reading UV FITS file: J1724-1443_S_2005_06_30_yyk_uve.fits
! AN table 1: 9 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.958025 visibilities/baseline/integration-bin.
! Found source: J1724-1443
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1468 lines of history.
! 
! Reading 1552 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1724-1443_S_2005_06_30_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.443652 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.556 mas, bmaj=6.638 mas, bpa=-2.822 degrees
! Estimated noise=1.53914 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.350335 Jy
! Component: 100  -  total flux cleaned = 0.422155 Jy
! Total flux subtracted in 100 components = 0.422155 Jy
! Clean residual min=-0.008888 max=0.022290 Jy/beam
! Clean residual mean=0.000070 rms=0.003222 Jy/beam
! Combined flux in latest and established models = 0.422155 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.422155 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.110142Jy  sigma=1.450683
! Fit after  self-cal, rms=0.109943Jy  sigma=1.447181
! Inverting map and beam 
! Estimated beam: bmin=2.556 mas, bmaj=6.638 mas, bpa=-2.822 degrees
! Estimated noise=1.53914 mJy/beam.
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0316029 Jy
! Component: 100  -  total flux cleaned = 0.0467048 Jy
! Total flux subtracted in 100 components = 0.0467048 Jy
! Clean residual min=-0.007385 max=0.007715 Jy/beam
! Clean residual mean=-0.000018 rms=0.002088 Jy/beam
! Combined flux in latest and established models = 0.46886 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 43 components and 0.46886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100000Jy  sigma=1.316177
! Fit after  self-cal, rms=0.099979Jy  sigma=1.315785
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.291 mas, bmaj=8.417 mas, bpa=-3.754 degrees
! Estimated noise=1.10863 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00266314 Jy
! Component: 100  -  total flux cleaned = 0.00324491 Jy
! Component: 150  -  total flux cleaned = 0.00360506 Jy
! Component: 200  -  total flux cleaned = 0.00397602 Jy
! Total flux subtracted in 200 components = 0.00397603 Jy
! Clean residual min=-0.006677 max=0.008051 Jy/beam
! Clean residual mean=-0.000169 rms=0.001886 Jy/beam
! Combined flux in latest and established models = 0.472836 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 52 components and 0.472836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099616Jy  sigma=1.312084
! Fit after  self-cal, rms=0.099598Jy  sigma=1.312007
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.291 x 8.417 at -3.754 degrees (North through East)
! Clean map  min=-0.0065636  max=0.41467 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.998001
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HN        1.02     KP        0.97     
!   LA        1.07     MK        0.93     NL        0.95     OV        0.98     
!   PT        1.09     SC        0.95     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.982114
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.03     KP        1.00     
!   LA        1.03     MK        0.97     NL        0.97     OV        1.03     
!   PT        1.06     SC        1.04     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.973147
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.93     HN        1.01     KP        0.97     
!   LA        0.95     MK        1.11     NL        1.04     OV        1.03     
!   PT        1.10     SC        1.00     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.06371
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.97     HN        0.91     KP        0.88     
!   LA        0.79     MK        1.07     NL        0.95     OV        0.82     
!   PT        1.00     SC        1.08     
! 
! 
! Fit before self-cal, rms=0.099598Jy  sigma=1.312007
! Fit after  self-cal, rms=0.088658Jy  sigma=1.151809
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088658Jy  sigma=1.151809
! Fit after  self-cal, rms=0.088667Jy  sigma=1.151775
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.339 mas, bmaj=8.542 mas, bpa=-3.639 degrees
! Estimated noise=1.10852 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000857006 Jy
! Component: 100  -  total flux cleaned = -0.00100505 Jy
! Component: 150  -  total flux cleaned = -0.0011378 Jy
! Component: 200  -  total flux cleaned = -0.00121837 Jy
! Total flux subtracted in 200 components = -0.00121837 Jy
! Clean residual min=-0.004596 max=0.004524 Jy/beam
! Clean residual mean=-0.000046 rms=0.001309 Jy/beam
! Combined flux in latest and established models = 0.471618 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 62 components and 0.471618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088640Jy  sigma=1.151021
! Fit after  self-cal, rms=0.088634Jy  sigma=1.151002
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088634Jy  sigma=1.151002
! Fit after  self-cal, rms=0.086911Jy  sigma=1.123738
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0002325 Jy
! Component: 100  -  total flux cleaned = 0.000159849 Jy
! Component: 150  -  total flux cleaned = 0.000125533 Jy
! Component: 200  -  total flux cleaned = 6.06217e-05 Jy
! Total flux subtracted in 200 components = 6.06217e-05 Jy
! Clean residual min=-0.004653 max=0.004464 Jy/beam
! Clean residual mean=-0.000045 rms=0.001304 Jy/beam
! Combined flux in latest and established models = 0.471679 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 67 components and 0.471679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086872Jy  sigma=1.123341
! Fit after  self-cal, rms=0.086789Jy  sigma=1.121192
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.339 x 8.542 at -3.639 degrees (North through East)
! Clean map  min=-0.004466  max=0.41816 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086789Jy  sigma=1.121192
! Fit after  self-cal, rms=0.078072Jy  sigma=0.979945
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078072Jy  sigma=0.979945
! Fit after  self-cal, rms=0.078108Jy  sigma=0.979668
! Inverting map and beam 
! Estimated beam: bmin=3.345 mas, bmaj=8.572 mas, bpa=-3.609 degrees
! Estimated noise=1.10539 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000396344 Jy
! Component: 100  -  total flux cleaned = -0.000396478 Jy
! Component: 150  -  total flux cleaned = -0.000368738 Jy
! Component: 200  -  total flux cleaned = -0.000345251 Jy
! Total flux subtracted in 200 components = -0.000345251 Jy
! Clean residual min=-0.004016 max=0.003974 Jy/beam
! Clean residual mean=-0.000018 rms=0.001000 Jy/beam
! Combined flux in latest and established models = 0.471333 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 67 components and 0.471333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078113Jy  sigma=0.979311
! Fit after  self-cal, rms=0.078137Jy  sigma=0.979251
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078137Jy  sigma=0.979251
! Fit after  self-cal, rms=0.077557Jy  sigma=0.957992
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077557Jy  sigma=0.957992
! Fit after  self-cal, rms=0.077569Jy  sigma=0.957978
! Inverting map and beam 
! Estimated beam: bmin=3.352 mas, bmaj=8.585 mas, bpa=-3.603 degrees
! Estimated noise=1.10608 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -8.49291e-05 Jy
! Component: 100  -  total flux cleaned = -8.6189e-05 Jy
! Component: 150  -  total flux cleaned = -6.42677e-05 Jy
! Component: 200  -  total flux cleaned = -6.46669e-05 Jy
! Total flux subtracted in 200 components = -6.46669e-05 Jy
! Clean residual min=-0.004048 max=0.004003 Jy/beam
! Clean residual mean=-0.000013 rms=0.000994 Jy/beam
! Combined flux in latest and established models = 0.471269 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 70 components and 0.471269 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077575Jy  sigma=0.957773
! Fit after  self-cal, rms=0.077582Jy  sigma=0.957760
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.937 mas, bmaj=16.05 mas, bpa=2.223 degrees
! Estimated noise=1.37525 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000308623 Jy
! Component: 100  -  total flux cleaned = -0.000334692 Jy
! Component: 150  -  total flux cleaned = -0.000347011 Jy
! Component: 200  -  total flux cleaned = -0.000357793 Jy
! Total flux subtracted in 200 components = -0.000357793 Jy
! Clean residual min=-0.004553 max=0.003506 Jy/beam
! Clean residual mean=-0.000023 rms=0.001177 Jy/beam
! Combined flux in latest and established models = 0.470911 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 76 components and 0.470911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077578Jy  sigma=0.957827
! Fit after  self-cal, rms=0.077584Jy  sigma=0.957807
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.578 mas, bmaj=6.675 mas, bpa=-2.639 degrees
! Estimated noise=1.52613 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.347133 Jy
! Component: 100  -  total flux cleaned = 0.415588 Jy
! Component: 150  -  total flux cleaned = 0.445308 Jy
! Component: 200  -  total flux cleaned = 0.459269 Jy
! Total flux subtracted in 200 components = 0.459269 Jy
! Clean residual min=-0.005460 max=0.004902 Jy/beam
! Clean residual mean=0.000015 rms=0.001395 Jy/beam
! Combined flux in latest and established models = 0.459269 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.459269 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.352 mas, bmaj=8.585 mas, bpa=-3.603 degrees
! Estimated noise=1.10608 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00859953 Jy
! Component: 100  -  total flux cleaned = 0.0113723 Jy
! Component: 150  -  total flux cleaned = 0.0121712 Jy
! Component: 200  -  total flux cleaned = 0.0123124 Jy
! Total flux subtracted in 200 components = 0.0123124 Jy
! Clean residual min=-0.004038 max=0.004055 Jy/beam
! Clean residual mean=-0.000014 rms=0.000999 Jy/beam
! Combined flux in latest and established models = 0.471581 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 47 components and 0.471581 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.937 mas, bmaj=16.05 mas, bpa=2.223 degrees
! Estimated noise=1.37525 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000324077 Jy
! Component: 100  -  total flux cleaned = -0.000347942 Jy
! Component: 150  -  total flux cleaned = -0.000348379 Jy
! Component: 200  -  total flux cleaned = -0.000346992 Jy
! Total flux subtracted in 200 components = -0.000346992 Jy
! Clean residual min=-0.004544 max=0.003511 Jy/beam
! Clean residual mean=-0.000025 rms=0.001172 Jy/beam
! Combined flux in latest and established models = 0.471234 Jy
! Adding 5 model components to the UV plane model.
! The established model now contains 51 components and 0.471234 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.352 mas, bmaj=8.585 mas, bpa=-3.603 degrees
! Estimated noise=1.10608 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000356112 Jy
! Component: 100  -  total flux cleaned = 0.000381705 Jy
! Component: 150  -  total flux cleaned = 0.000428023 Jy
! Component: 200  -  total flux cleaned = 0.000428987 Jy
! Total flux subtracted in 200 components = 0.000428987 Jy
! Clean residual min=-0.004017 max=0.004030 Jy/beam
! Clean residual mean=-0.000014 rms=0.000997 Jy/beam
! Combined flux in latest and established models = 0.471663 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 61 components and 0.471663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077633Jy  sigma=0.958350
! Fit after  self-cal, rms=0.077629Jy  sigma=0.958321
wmodel J1724-1443_S_2005_06_30_yyk\_map.mod
! Writing 61 model components to file: J1724-1443_S_2005_06_30_yyk_map.mod
wobs J1724-1443_S_2005_06_30_yyk\_uvs.fits
! Writing UV FITS file: J1724-1443_S_2005_06_30_yyk_uvs.fits
wwins J1724-1443_S_2005_06_30_yyk\_map.win
! wwins: Wrote 1 windows to J1724-1443_S_2005_06_30_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000127232 Jy
! Component: 100  -  total flux cleaned = 0.000799365 Jy
! Component: 150  -  total flux cleaned = 0.0012043 Jy
! Component: 200  -  total flux cleaned = 0.00131452 Jy
! Component: 250  -  total flux cleaned = 0.00121109 Jy
! Component: 300  -  total flux cleaned = 0.00136453 Jy
! Component: 350  -  total flux cleaned = 0.0012663 Jy
! Component: 400  -  total flux cleaned = 0.00121864 Jy
! Component: 450  -  total flux cleaned = 0.00103365 Jy
! Component: 500  -  total flux cleaned = 0.000944049 Jy
! Component: 550  -  total flux cleaned = 0.000723953 Jy
! Component: 600  -  total flux cleaned = 0.000638108 Jy
! Component: 650  -  total flux cleaned = 0.00055382 Jy
! Component: 700  -  total flux cleaned = 0.00047092 Jy
! Component: 750  -  total flux cleaned = 0.000226844 Jy
! Component: 800  -  total flux cleaned = 2.73638e-05 Jy
! Component: 850  -  total flux cleaned = -1.2068e-05 Jy
! Component: 900  -  total flux cleaned = -0.000167107 Jy
! Component: 950  -  total flux cleaned = -0.000395852 Jy
! Component: 1000  -  total flux cleaned = -0.00058334 Jy
! Component: 1050  -  total flux cleaned = -0.000805466 Jy
! Component: 1100  -  total flux cleaned = -0.000878557 Jy
! Component: 1150  -  total flux cleaned = -0.00109478 Jy
! Component: 1200  -  total flux cleaned = -0.00127238 Jy
! Component: 1250  -  total flux cleaned = -0.00137734 Jy
! Component: 1300  -  total flux cleaned = -0.00158488 Jy
! Component: 1350  -  total flux cleaned = -0.00175484 Jy
! Component: 1400  -  total flux cleaned = -0.00178809 Jy
! Component: 1450  -  total flux cleaned = -0.0018218 Jy
! Component: 1500  -  total flux cleaned = -0.00188761 Jy
! Component: 1550  -  total flux cleaned = -0.00198496 Jy
! Component: 1600  -  total flux cleaned = -0.00204867 Jy
! Component: 1650  -  total flux cleaned = -0.00201699 Jy
! Component: 1700  -  total flux cleaned = -0.00214274 Jy
! Component: 1750  -  total flux cleaned = -0.00220435 Jy
! Component: 1800  -  total flux cleaned = -0.00220417 Jy
! Component: 1850  -  total flux cleaned = -0.00226435 Jy
! Component: 1900  -  total flux cleaned = -0.00220443 Jy
! Component: 1950  -  total flux cleaned = -0.00229354 Jy
! Component: 2000  -  total flux cleaned = -0.00226387 Jy
! Total flux subtracted in 2048 components = -0.00223514 Jy
! Clean residual min=-0.001537 max=0.001652 Jy/beam
! Clean residual mean=-0.000017 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.469428 Jy
keep
! Adding 139 model components to the UV plane model.
! The established model now contains 200 components and 0.469428 Jy
![Exited script file: muppet]
wmap "J1724-1443_S_2005_06_30_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.352 x 8.585 at -3.603 degrees (North through East)
! Clean map  min=-0.0031747  max=0.41913 Jy/beam
! Writing clean map to FITS file: J1724-1443_S_2005_06_30_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.41913 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000574359 
device "J1724-1443_S_2005_06_30_yyk\_map.eps/VPS"
! Attempting to open device: 'J1724-1443_S_2005_06_30_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.411108 0.411108 0.822217 1.64443 3.28887 6.57773 13.1555 26.3109 52.6219
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0017 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.419 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.352 x 8.585 at -3.603 degrees (North through East)
! Clean map  min=-0.0031747  max=0.41913 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1724-1443_S_2005_06_30_yyk\_map.gif/gif"
! Attempting to open device: 'J1724-1443_S_2005_06_30_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1724-1443_S_2005_06_30_yyk_uvs.log closed on Sat Oct  8 17:31:35 2005