! Started logfile: J1634-2058_S_2005_06_30_yyk_uvs.log on Sat Oct 8 17:28:30 2005 obs J1634-2058_S_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J1634-2058_S_2005_06_30_yyk_uve.fits ! AN table 1: 19 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.940351 visibilities/baseline/integration-bin. ! Found source: J1634-2058 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1469 lines of history. ! ! Reading 3216 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1634-2058_S_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.149842 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=11.69 mas, bpa=16.06 degrees ! Estimated noise=1.191 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.106963 Jy ! Component: 100 - total flux cleaned = 0.12781 Jy ! Total flux subtracted in 100 components = 0.12781 Jy ! Clean residual min=-0.004969 max=0.006563 Jy/beam ! Clean residual mean=-0.000025 rms=0.001671 Jy/beam ! Combined flux in latest and established models = 0.12781 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.12781 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.075605Jy sigma=1.099427 ! Fit after self-cal, rms=0.075456Jy sigma=1.096037 ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=11.69 mas, bpa=16.06 degrees ! Estimated noise=1.191 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.025 mas, bmaj=13.78 mas, bpa=15.48 degrees ! Estimated noise=0.834103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114116 Jy ! Component: 100 - total flux cleaned = 0.0168859 Jy ! Component: 150 - total flux cleaned = 0.0196729 Jy ! Component: 200 - total flux cleaned = 0.0203493 Jy ! Total flux subtracted in 200 components = 0.0203493 Jy ! Clean residual min=-0.003619 max=0.003894 Jy/beam ! Clean residual mean=-0.000030 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.148159 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 38 components and 0.148159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073935Jy sigma=1.072610 ! Fit after self-cal, rms=0.073931Jy sigma=1.072438 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.025 x 13.78 at 15.48 degrees (North through East) ! Clean map min=-0.0035091 max=0.12415 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01399 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 0.97 KP 0.96 ! LA 1.10 MK 1.00* NL 1.00 OV 0.96 ! PT 1.01 SC 0.89 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.993676 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 1.00 KP 1.03 ! LA 1.01 MK 1.00* NL 1.03 OV 0.99 ! PT 1.05 SC 1.04 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.073931Jy sigma=1.072438 ! Fit after self-cal, rms=0.073296Jy sigma=1.067835 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073296Jy sigma=1.067835 ! Fit after self-cal, rms=0.073294Jy sigma=1.067823 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.97 mas, bmaj=13.7 mas, bpa=15.71 degrees ! Estimated noise=0.835604 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270735 Jy ! Component: 100 - total flux cleaned = 0.00360355 Jy ! Component: 150 - total flux cleaned = 0.00392226 Jy ! Component: 200 - total flux cleaned = 0.0041194 Jy ! Total flux subtracted in 200 components = 0.0041194 Jy ! Clean residual min=-0.003724 max=0.004067 Jy/beam ! Clean residual mean=-0.000019 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.152279 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 56 components and 0.152279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073175Jy sigma=1.066218 ! Fit after self-cal, rms=0.073173Jy sigma=1.066182 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073173Jy sigma=1.066182 ! Fit after self-cal, rms=0.070598Jy sigma=1.023732 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124405 Jy ! Component: 100 - total flux cleaned = 0.00136373 Jy ! Component: 150 - total flux cleaned = 0.00146876 Jy ! Component: 200 - total flux cleaned = 0.00153998 Jy ! Total flux subtracted in 200 components = 0.00153998 Jy ! Clean residual min=-0.003418 max=0.004026 Jy/beam ! Clean residual mean=-0.000024 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.153819 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 0.153819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070547Jy sigma=1.023300 ! Fit after self-cal, rms=0.070601Jy sigma=1.020762 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.97 x 13.7 at 15.71 degrees (North through East) ! Clean map min=-0.0033257 max=0.12421 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070601Jy sigma=1.020762 ! Fit after self-cal, rms=0.070680Jy sigma=1.015288 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070680Jy sigma=1.015288 ! Fit after self-cal, rms=0.070776Jy sigma=1.014945 ! Inverting map and beam ! Estimated beam: bmin=3.929 mas, bmaj=13.66 mas, bpa=15.97 degrees ! Estimated noise=0.837141 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019126 Jy ! Component: 100 - total flux cleaned = 0.00243455 Jy ! Component: 150 - total flux cleaned = 0.00265398 Jy ! Component: 200 - total flux cleaned = 0.00279205 Jy ! Total flux subtracted in 200 components = 0.00279205 Jy ! Clean residual min=-0.003427 max=0.003985 Jy/beam ! Clean residual mean=-0.000043 rms=0.001058 Jy/beam ! Combined flux in latest and established models = 0.156611 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 84 components and 0.156611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070708Jy sigma=1.014127 ! Fit after self-cal, rms=0.070760Jy sigma=1.014061 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070760Jy sigma=1.014061 ! Fit after self-cal, rms=0.070865Jy sigma=1.007967 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070865Jy sigma=1.007967 ! Fit after self-cal, rms=0.070906Jy sigma=1.007862 ! Inverting map and beam ! Estimated beam: bmin=3.909 mas, bmaj=13.7 mas, bpa=16.14 degrees ! Estimated noise=0.837891 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000704744 Jy ! Component: 100 - total flux cleaned = 0.00089633 Jy ! Component: 150 - total flux cleaned = 0.0010059 Jy ! Component: 200 - total flux cleaned = 0.00110483 Jy ! Total flux subtracted in 200 components = 0.00110483 Jy ! Clean residual min=-0.003181 max=0.004005 Jy/beam ! Clean residual mean=-0.000033 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.157715 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 94 components and 0.157715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070877Jy sigma=1.007449 ! Fit after self-cal, rms=0.070898Jy sigma=1.007425 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.106 mas, bmaj=18.45 mas, bpa=6.224 degrees ! Estimated noise=0.987157 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000803955 Jy ! Component: 100 - total flux cleaned = 0.000897912 Jy ! Component: 150 - total flux cleaned = 0.000923126 Jy ! Component: 200 - total flux cleaned = 0.000943434 Jy ! Total flux subtracted in 200 components = 0.000943434 Jy ! Clean residual min=-0.003943 max=0.004026 Jy/beam ! Clean residual mean=-0.000055 rms=0.001356 Jy/beam ! Combined flux in latest and established models = 0.158659 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 101 components and 0.158659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070872Jy sigma=1.007513 ! Fit after self-cal, rms=0.070879Jy sigma=1.007494 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=11.68 mas, bpa=16.43 degrees ! Estimated noise=1.18257 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.107398 Jy ! Component: 100 - total flux cleaned = 0.129417 Jy ! Component: 150 - total flux cleaned = 0.140407 Jy ! Component: 200 - total flux cleaned = 0.146784 Jy ! Total flux subtracted in 200 components = 0.146784 Jy ! Clean residual min=-0.003859 max=0.004575 Jy/beam ! Clean residual mean=-0.000032 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 0.146784 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.146784 Jy ! Inverting map and beam ! Estimated beam: bmin=3.909 mas, bmaj=13.7 mas, bpa=16.14 degrees ! Estimated noise=0.837891 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00545494 Jy ! Component: 100 - total flux cleaned = 0.0081976 Jy ! Component: 150 - total flux cleaned = 0.00929554 Jy ! Component: 200 - total flux cleaned = 0.00958952 Jy ! Total flux subtracted in 200 components = 0.00958952 Jy ! Clean residual min=-0.003294 max=0.004006 Jy/beam ! Clean residual mean=-0.000033 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.156373 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 50 components and 0.156373 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.106 mas, bmaj=18.45 mas, bpa=6.224 degrees ! Estimated noise=0.987157 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145843 Jy ! Component: 100 - total flux cleaned = 0.00164328 Jy ! Component: 150 - total flux cleaned = 0.00173489 Jy ! Component: 200 - total flux cleaned = 0.0017886 Jy ! Total flux subtracted in 200 components = 0.0017886 Jy ! Clean residual min=-0.003937 max=0.004032 Jy/beam ! Clean residual mean=-0.000054 rms=0.001360 Jy/beam ! Combined flux in latest and established models = 0.158162 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.158162 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.909 mas, bmaj=13.7 mas, bpa=16.14 degrees ! Estimated noise=0.837891 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000654017 Jy ! Component: 100 - total flux cleaned = -0.000579248 Jy ! Component: 150 - total flux cleaned = -0.000456479 Jy ! Component: 200 - total flux cleaned = -0.000321758 Jy ! Total flux subtracted in 200 components = -0.000321758 Jy ! Clean residual min=-0.003346 max=0.004030 Jy/beam ! Clean residual mean=-0.000033 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.15784 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 0.15784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070911Jy sigma=1.007565 ! Fit after self-cal, rms=0.070918Jy sigma=1.007533 wmodel J1634-2058_S_2005_06_30_yyk\_map.mod ! Writing 71 model components to file: J1634-2058_S_2005_06_30_yyk_map.mod wobs J1634-2058_S_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J1634-2058_S_2005_06_30_yyk_uvs.fits wwins J1634-2058_S_2005_06_30_yyk\_map.win ! wwins: Wrote 1 windows to J1634-2058_S_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100799 Jy ! Component: 100 - total flux cleaned = 0.0010634 Jy ! Component: 150 - total flux cleaned = 0.0012269 Jy ! Component: 200 - total flux cleaned = 0.00148587 Jy ! Component: 250 - total flux cleaned = 0.00148633 Jy ! Component: 300 - total flux cleaned = 0.00162692 Jy ! Component: 350 - total flux cleaned = 0.00180882 Jy ! Component: 400 - total flux cleaned = 0.00176555 Jy ! Component: 450 - total flux cleaned = 0.00167982 Jy ! Component: 500 - total flux cleaned = 0.00155523 Jy ! Component: 550 - total flux cleaned = 0.00163654 Jy ! Component: 600 - total flux cleaned = 0.00171565 Jy ! Component: 650 - total flux cleaned = 0.00179244 Jy ! Component: 700 - total flux cleaned = 0.00182952 Jy ! Component: 750 - total flux cleaned = 0.00179168 Jy ! Component: 800 - total flux cleaned = 0.00175487 Jy ! Component: 850 - total flux cleaned = 0.00179017 Jy ! Component: 900 - total flux cleaned = 0.0017555 Jy ! Component: 950 - total flux cleaned = 0.00175574 Jy ! Component: 1000 - total flux cleaned = 0.00188925 Jy ! Component: 1050 - total flux cleaned = 0.00185641 Jy ! Component: 1100 - total flux cleaned = 0.00185683 Jy ! Component: 1150 - total flux cleaned = 0.00185718 Jy ! Component: 1200 - total flux cleaned = 0.00185709 Jy ! Component: 1250 - total flux cleaned = 0.00182682 Jy ! Component: 1300 - total flux cleaned = 0.00179712 Jy ! Component: 1350 - total flux cleaned = 0.0017979 Jy ! Component: 1400 - total flux cleaned = 0.00188558 Jy ! Component: 1450 - total flux cleaned = 0.00182802 Jy ! Component: 1500 - total flux cleaned = 0.00185659 Jy ! Component: 1550 - total flux cleaned = 0.00182922 Jy ! Component: 1600 - total flux cleaned = 0.00196603 Jy ! Component: 1650 - total flux cleaned = 0.00193882 Jy ! Component: 1700 - total flux cleaned = 0.0019657 Jy ! Component: 1750 - total flux cleaned = 0.00199195 Jy ! Component: 1800 - total flux cleaned = 0.00204325 Jy ! Component: 1850 - total flux cleaned = 0.00206847 Jy ! Component: 1900 - total flux cleaned = 0.00209376 Jy ! Component: 1950 - total flux cleaned = 0.00211899 Jy ! Component: 2000 - total flux cleaned = 0.00226642 Jy ! Total flux subtracted in 2048 components = 0.00231461 Jy ! Clean residual min=-0.001242 max=0.001412 Jy/beam ! Clean residual mean=-0.000031 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.160155 Jy keep ! Adding 127 model components to the UV plane model. ! The established model now contains 198 components and 0.160155 Jy ![Exited script file: muppet] wmap "J1634-2058_S_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.909 x 13.7 at 16.14 degrees (North through East) ! Clean map min=-0.0026834 max=0.12359 Jy/beam ! Writing clean map to FITS file: J1634-2058_S_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.123589 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000547587 device "J1634-2058_S_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1634-2058_S_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.32921 1.32921 2.65843 5.31685 10.6337 21.2674 42.5348 85.0696 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.123 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.909 x 13.7 at 16.14 degrees (North through East) ! Clean map min=-0.0026834 max=0.12359 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1634-2058_S_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1634-2058_S_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1634-2058_S_2005_06_30_yyk_uvs.log closed on Sat Oct 8 17:28:34 2005