! Started logfile: J1507-1652_X_2005_05_12_yyk_uvs.log on Sat Oct 8 17:25:45 2005 obs J1507-1652_X_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J1507-1652_X_2005_05_12_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.826667 visibilities/baseline/integration-bin. ! Found source: J1507-1652 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1439 lines of history. ! ! Reading 744 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1507-1652_X_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.15074 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7069 mas, bmaj=1.86 mas, bpa=-6.395 degrees ! Estimated noise=1.98961 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.916994 Jy ! Component: 100 - total flux cleaned = 1.17438 Jy ! Total flux subtracted in 100 components = 1.17438 Jy ! Clean residual min=-0.078300 max=0.150652 Jy/beam ! Clean residual mean=-0.001020 rms=0.027393 Jy/beam ! Combined flux in latest and established models = 1.17438 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 1.17438 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.361369Jy sigma=6.772235 ! Fit after self-cal, rms=0.360457Jy sigma=6.759353 ! Inverting map and beam ! Estimated beam: bmin=0.7069 mas, bmaj=1.86 mas, bpa=-6.395 degrees ! Estimated noise=1.98961 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8527 mas, bmaj=2.278 mas, bpa=-7.671 degrees ! Estimated noise=1.48001 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.212021 Jy ! Component: 100 - total flux cleaned = 0.315319 Jy ! Component: 150 - total flux cleaned = 0.355995 Jy ! Component: 200 - total flux cleaned = 0.367629 Jy ! Total flux subtracted in 200 components = 0.367629 Jy ! Clean residual min=-0.075686 max=0.176477 Jy/beam ! Clean residual mean=-0.000501 rms=0.025903 Jy/beam ! Combined flux in latest and established models = 1.54201 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 32 components and 1.54201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286105Jy sigma=5.072638 ! Fit after self-cal, rms=0.285168Jy sigma=5.064377 ! Inverting map ! Added new window around map position (1.8, -3.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.184677 Jy ! Component: 100 - total flux cleaned = 0.213926 Jy ! Component: 150 - total flux cleaned = 0.219715 Jy ! Component: 200 - total flux cleaned = 0.222851 Jy ! Total flux subtracted in 200 components = 0.222851 Jy ! Clean residual min=-0.066495 max=0.064096 Jy/beam ! Clean residual mean=0.000021 rms=0.014851 Jy/beam ! Combined flux in latest and established models = 1.76486 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 60 components and 1.76486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185638Jy sigma=3.231511 ! Fit after self-cal, rms=0.174177Jy sigma=3.014512 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8527 x 2.278 at -7.671 degrees (North through East) ! Clean map min=-0.047071 max=0.92323 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.983747 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 1.36 KP 0.93 ! LA 1.08 MK 0.99 NL 0.96 OV 0.96 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.985082 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.38 KP 0.88 ! LA 1.08 MK 0.99 NL 0.94 OV 0.95 ! PT 0.97 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.970496 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 1.32 KP 0.84 ! LA 1.06 MK 1.04 NL 0.94 OV 0.98 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.94601 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 1.44 KP 0.97 ! LA 1.01 MK 1.06 NL 0.94 OV 1.00 ! PT 1.07 SC 1.00* ! ! ! Fit before self-cal, rms=0.174177Jy sigma=3.014512 ! Fit after self-cal, rms=0.130543Jy sigma=2.210967 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130543Jy sigma=2.210967 ! Fit after self-cal, rms=0.130593Jy sigma=2.210662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8782 mas, bmaj=2.26 mas, bpa=-6.526 degrees ! Estimated noise=1.438 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0621412 Jy ! Component: 100 - total flux cleaned = -0.0676638 Jy ! Component: 150 - total flux cleaned = -0.0711682 Jy ! Component: 200 - total flux cleaned = -0.0717938 Jy ! Total flux subtracted in 200 components = -0.0717938 Jy ! Clean residual min=-0.024964 max=0.018207 Jy/beam ! Clean residual mean=0.000096 rms=0.004925 Jy/beam ! Combined flux in latest and established models = 1.69306 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 1.69306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101793Jy sigma=1.634747 ! Fit after self-cal, rms=0.101489Jy sigma=1.626770 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101489Jy sigma=1.626770 ! Fit after self-cal, rms=0.098743Jy sigma=1.568870 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267735 Jy ! Component: 100 - total flux cleaned = 0.00225513 Jy ! Component: 150 - total flux cleaned = 0.00262949 Jy ! Component: 200 - total flux cleaned = 0.00229907 Jy ! Total flux subtracted in 200 components = 0.00229907 Jy ! Clean residual min=-0.023118 max=0.015666 Jy/beam ! Clean residual mean=0.000085 rms=0.004493 Jy/beam ! Combined flux in latest and established models = 1.69536 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 87 components and 1.69536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095524Jy sigma=1.511886 ! Fit after self-cal, rms=0.094880Jy sigma=1.503474 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8782 x 2.26 at -6.526 degrees (North through East) ! Clean map min=-0.021808 max=0.91865 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094880Jy sigma=1.503474 ! Fit after self-cal, rms=0.088168Jy sigma=1.313730 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088168Jy sigma=1.313730 ! Fit after self-cal, rms=0.088041Jy sigma=1.312650 ! Inverting map and beam ! Estimated beam: bmin=0.8765 mas, bmaj=2.237 mas, bpa=-6.332 degrees ! Estimated noise=1.43334 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378745 Jy ! Component: 100 - total flux cleaned = 0.00381937 Jy ! Component: 150 - total flux cleaned = 0.00383177 Jy ! Component: 200 - total flux cleaned = 0.0038257 Jy ! Total flux subtracted in 200 components = 0.0038257 Jy ! Clean residual min=-0.019255 max=0.012304 Jy/beam ! Clean residual mean=0.000024 rms=0.003635 Jy/beam ! Combined flux in latest and established models = 1.69919 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 102 components and 1.69919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084966Jy sigma=1.257033 ! Fit after self-cal, rms=0.084750Jy sigma=1.254958 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084750Jy sigma=1.254958 ! Fit after self-cal, rms=0.083927Jy sigma=1.233011 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083927Jy sigma=1.233011 ! Fit after self-cal, rms=0.083901Jy sigma=1.232870 ! Inverting map and beam ! Estimated beam: bmin=0.8753 mas, bmaj=2.229 mas, bpa=-6.22 degrees ! Estimated noise=1.43076 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116097 Jy ! Component: 100 - total flux cleaned = 0.00146733 Jy ! Component: 150 - total flux cleaned = 0.00146011 Jy ! Component: 200 - total flux cleaned = 0.00145697 Jy ! Total flux subtracted in 200 components = 0.00145697 Jy ! Clean residual min=-0.017401 max=0.011195 Jy/beam ! Clean residual mean=0.000019 rms=0.003338 Jy/beam ! Combined flux in latest and established models = 1.70065 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 105 components and 1.70065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082002Jy sigma=1.198627 ! Fit after self-cal, rms=0.081849Jy sigma=1.197239 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.361 mas, bmaj=4.72 mas, bpa=-3.308 degrees ! Estimated noise=1.82961 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00321113 Jy ! Component: 100 - total flux cleaned = -0.00343534 Jy ! Component: 150 - total flux cleaned = -0.00359137 Jy ! Component: 200 - total flux cleaned = -0.00359866 Jy ! Total flux subtracted in 200 components = -0.00359866 Jy ! Clean residual min=-0.015041 max=0.011134 Jy/beam ! Clean residual mean=0.000009 rms=0.003593 Jy/beam ! Combined flux in latest and established models = 1.69705 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 119 components and 1.69705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081268Jy sigma=1.190645 ! Fit after self-cal, rms=0.080917Jy sigma=1.185585 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7163 mas, bmaj=1.843 mas, bpa=-5.383 degrees ! Estimated noise=1.93496 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.885007 Jy ! Component: 100 - total flux cleaned = 1.15092 Jy ! Component: 150 - total flux cleaned = 1.3033 Jy ! Component: 200 - total flux cleaned = 1.40429 Jy ! Total flux subtracted in 200 components = 1.40429 Jy ! Clean residual min=-0.027375 max=0.045797 Jy/beam ! Clean residual mean=-0.000480 rms=0.010362 Jy/beam ! Combined flux in latest and established models = 1.40429 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 1.40429 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8753 mas, bmaj=2.229 mas, bpa=-6.22 degrees ! Estimated noise=1.43076 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.107939 Jy ! Component: 100 - total flux cleaned = 0.171246 Jy ! Component: 150 - total flux cleaned = 0.21103 Jy ! Component: 200 - total flux cleaned = 0.23694 Jy ! Total flux subtracted in 200 components = 0.23694 Jy ! Clean residual min=-0.014958 max=0.018338 Jy/beam ! Clean residual mean=-0.000158 rms=0.004353 Jy/beam ! Combined flux in latest and established models = 1.64123 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 94 components and 1.64123 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.361 mas, bmaj=4.72 mas, bpa=-3.308 degrees ! Estimated noise=1.82961 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0277142 Jy ! Component: 100 - total flux cleaned = 0.0409685 Jy ! Component: 150 - total flux cleaned = 0.0447288 Jy ! Component: 200 - total flux cleaned = 0.045436 Jy ! Total flux subtracted in 200 components = 0.045436 Jy ! Clean residual min=-0.011837 max=0.011620 Jy/beam ! Clean residual mean=-0.000043 rms=0.003611 Jy/beam ! Combined flux in latest and established models = 1.68667 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 106 components and 1.68667 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8753 mas, bmaj=2.229 mas, bpa=-6.22 degrees ! Estimated noise=1.43076 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.004196 Jy ! Component: 100 - total flux cleaned = -0.00380582 Jy ! Component: 150 - total flux cleaned = -0.00348185 Jy ! Component: 200 - total flux cleaned = -0.00319346 Jy ! Total flux subtracted in 200 components = -0.00319346 Jy ! Clean residual min=-0.012557 max=0.011197 Jy/beam ! Clean residual mean=-0.000033 rms=0.003148 Jy/beam ! Combined flux in latest and established models = 1.68347 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 120 components and 1.68347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079658Jy sigma=1.169041 ! Fit after self-cal, rms=0.078616Jy sigma=1.151309 wmodel J1507-1652_X_2005_05_12_yyk\_map.mod ! Writing 120 model components to file: J1507-1652_X_2005_05_12_yyk_map.mod wobs J1507-1652_X_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J1507-1652_X_2005_05_12_yyk_uvs.fits wwins J1507-1652_X_2005_05_12_yyk\_map.win ! wwins: Wrote 2 windows to J1507-1652_X_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00145999 Jy ! Component: 100 - total flux cleaned = -0.00389835 Jy ! Component: 150 - total flux cleaned = -0.00493038 Jy ! Component: 200 - total flux cleaned = -0.00606059 Jy ! Component: 250 - total flux cleaned = -0.00621071 Jy ! Component: 300 - total flux cleaned = -0.00635526 Jy ! Component: 350 - total flux cleaned = -0.00648952 Jy ! Component: 400 - total flux cleaned = -0.00649081 Jy ! Component: 450 - total flux cleaned = -0.00636457 Jy ! Component: 500 - total flux cleaned = -0.00649014 Jy ! Component: 550 - total flux cleaned = -0.00625062 Jy ! Component: 600 - total flux cleaned = -0.00601696 Jy ! Component: 650 - total flux cleaned = -0.00590218 Jy ! Component: 700 - total flux cleaned = -0.00557684 Jy ! Component: 750 - total flux cleaned = -0.00578843 Jy ! Component: 800 - total flux cleaned = -0.00558565 Jy ! Component: 850 - total flux cleaned = -0.00588679 Jy ! Component: 900 - total flux cleaned = -0.00598239 Jy ! Component: 950 - total flux cleaned = -0.00607806 Jy ! Component: 1000 - total flux cleaned = -0.00607838 Jy ! Component: 1050 - total flux cleaned = -0.00598917 Jy ! Component: 1100 - total flux cleaned = -0.00590152 Jy ! Component: 1150 - total flux cleaned = -0.00564363 Jy ! Component: 1200 - total flux cleaned = -0.00514318 Jy ! Component: 1250 - total flux cleaned = -0.00514341 Jy ! Component: 1300 - total flux cleaned = -0.00506178 Jy ! Component: 1350 - total flux cleaned = -0.00451458 Jy ! Component: 1400 - total flux cleaned = -0.00436121 Jy ! Component: 1450 - total flux cleaned = -0.00413703 Jy ! Component: 1500 - total flux cleaned = -0.00391704 Jy ! Component: 1550 - total flux cleaned = -0.00370165 Jy ! Component: 1600 - total flux cleaned = -0.00355991 Jy ! Component: 1650 - total flux cleaned = -0.00348939 Jy ! Component: 1700 - total flux cleaned = -0.00335319 Jy ! Component: 1750 - total flux cleaned = -0.00322022 Jy ! Component: 1800 - total flux cleaned = -0.00315488 Jy ! Component: 1850 - total flux cleaned = -0.00321958 Jy ! Component: 1900 - total flux cleaned = -0.00328222 Jy ! Component: 1950 - total flux cleaned = -0.00309658 Jy ! Component: 2000 - total flux cleaned = -0.0031578 Jy ! Total flux subtracted in 2048 components = -0.00315736 Jy ! Clean residual min=-0.002982 max=0.003356 Jy/beam ! Clean residual mean=-0.000010 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 1.68032 Jy keep ! Adding 145 model components to the UV plane model. ! The established model now contains 265 components and 1.68031 Jy ![Exited script file: muppet] wmap "J1507-1652_X_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8753 x 2.229 at -6.22 degrees (North through East) ! Clean map min=-0.010449 max=0.94863 Jy/beam ! Writing clean map to FITS file: J1507-1652_X_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.948627 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00121995 device "J1507-1652_X_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J1507-1652_X_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.385804 0.385804 0.771609 1.54322 3.08643 6.17287 12.3457 24.6915 49.3829 98.7659 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0036 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.948 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8753 x 2.229 at -6.22 degrees (North through East) ! Clean map min=-0.010449 max=0.94863 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1507-1652_X_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J1507-1652_X_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1507-1652_X_2005_05_12_yyk_uvs.log closed on Sat Oct 8 17:25:49 2005