! Started logfile: J1507-1652_S_2005_05_12_yyk_uvs.log on Sat Oct 8 17:25:41 2005 obs J1507-1652_S_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J1507-1652_S_2005_05_12_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.826667 visibilities/baseline/integration-bin. ! Found source: J1507-1652 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1443 lines of history. ! ! Reading 744 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1507-1652_S_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.06289 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.566 mas, bmaj=7.023 mas, bpa=-4.679 degrees ! Estimated noise=1.97434 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.70003 Jy ! Component: 100 - total flux cleaned = 2.13207 Jy ! Total flux subtracted in 100 components = 2.13207 Jy ! Clean residual min=-0.071243 max=0.135563 Jy/beam ! Clean residual mean=-0.000642 rms=0.024553 Jy/beam ! Combined flux in latest and established models = 2.13207 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 2.13207 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.345036Jy sigma=5.350075 ! Fit after self-cal, rms=0.339903Jy sigma=5.260860 ! Inverting map and beam ! Estimated beam: bmin=2.566 mas, bmaj=7.023 mas, bpa=-4.679 degrees ! Estimated noise=1.97434 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.041 mas, bmaj=8.321 mas, bpa=-6.852 degrees ! Estimated noise=1.57373 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.168697 Jy ! Component: 100 - total flux cleaned = 0.228868 Jy ! Component: 150 - total flux cleaned = 0.250756 Jy ! Component: 200 - total flux cleaned = 0.257938 Jy ! Total flux subtracted in 200 components = 0.257938 Jy ! Clean residual min=-0.048873 max=0.057455 Jy/beam ! Clean residual mean=-0.000063 rms=0.015773 Jy/beam ! Combined flux in latest and established models = 2.39001 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 40 components and 2.39001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.258172Jy sigma=4.212344 ! Fit after self-cal, rms=0.257835Jy sigma=4.204820 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.041 x 8.321 at -6.852 degrees (North through East) ! Clean map min=-0.046861 max=1.9208 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.048 ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.99 HN 1.00 KP 0.94 ! LA 1.04 MK 0.88 NL 0.92 OV 0.96 ! PT 1.05 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.998882 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.07 HN 1.04 KP 1.01 ! LA 0.98 MK 0.96 NL 0.96 OV 0.99 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.963851 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.25 HN 1.04 KP 0.97 ! LA 0.92 MK 1.10 NL 1.01 OV 1.01 ! PT 1.07 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.0143 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.07 HN 0.95 KP 0.89 ! LA 1.02 MK 1.09 NL 0.94 OV 0.83 ! PT 0.93 SC 1.13 ! ! ! Fit before self-cal, rms=0.257835Jy sigma=4.204820 ! Fit after self-cal, rms=0.156407Jy sigma=2.510445 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156407Jy sigma=2.510445 ! Fit after self-cal, rms=0.156380Jy sigma=2.510267 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=8.319 mas, bpa=-6.876 degrees ! Estimated noise=1.58837 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.025394 Jy ! Component: 100 - total flux cleaned = 0.0292949 Jy ! Component: 150 - total flux cleaned = 0.030604 Jy ! Component: 200 - total flux cleaned = 0.0314249 Jy ! Total flux subtracted in 200 components = 0.0314249 Jy ! Clean residual min=-0.022557 max=0.014904 Jy/beam ! Clean residual mean=0.000093 rms=0.004491 Jy/beam ! Combined flux in latest and established models = 2.42143 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 2.42143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151403Jy sigma=2.459627 ! Fit after self-cal, rms=0.151370Jy sigma=2.457548 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151370Jy sigma=2.457548 ! Fit after self-cal, rms=0.145941Jy sigma=2.411732 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000363082 Jy ! Component: 100 - total flux cleaned = 0.000356871 Jy ! Component: 150 - total flux cleaned = 0.000362287 Jy ! Component: 200 - total flux cleaned = 0.000538632 Jy ! Total flux subtracted in 200 components = 0.000538632 Jy ! Clean residual min=-0.022308 max=0.014699 Jy/beam ! Clean residual mean=0.000094 rms=0.004433 Jy/beam ! Combined flux in latest and established models = 2.42197 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 2.42197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145168Jy sigma=2.403848 ! Fit after self-cal, rms=0.144431Jy sigma=2.397998 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.064 x 8.319 at -6.876 degrees (North through East) ! Clean map min=-0.021057 max=1.9471 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144431Jy sigma=2.397998 ! Fit after self-cal, rms=0.081442Jy sigma=1.161810 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081442Jy sigma=1.161810 ! Fit after self-cal, rms=0.081329Jy sigma=1.160037 ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=8.319 mas, bpa=-6.838 degrees ! Estimated noise=1.58545 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000287687 Jy ! Component: 100 - total flux cleaned = -0.000399023 Jy ! Component: 150 - total flux cleaned = -0.000587131 Jy ! Component: 200 - total flux cleaned = -0.000425192 Jy ! Total flux subtracted in 200 components = -0.000425192 Jy ! Clean residual min=-0.008308 max=0.008928 Jy/beam ! Clean residual mean=0.000040 rms=0.002205 Jy/beam ! Combined flux in latest and established models = 2.42154 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 68 components and 2.42154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080007Jy sigma=1.143094 ! Fit after self-cal, rms=0.079875Jy sigma=1.139549 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079875Jy sigma=1.139549 ! Fit after self-cal, rms=0.074713Jy sigma=1.070692 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074713Jy sigma=1.070692 ! Fit after self-cal, rms=0.074799Jy sigma=1.070442 ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=8.307 mas, bpa=-6.729 degrees ! Estimated noise=1.58401 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000188672 Jy ! Component: 100 - total flux cleaned = -0.000727569 Jy ! Component: 150 - total flux cleaned = -0.0007308 Jy ! Component: 200 - total flux cleaned = -0.000743089 Jy ! Total flux subtracted in 200 components = -0.000743089 Jy ! Clean residual min=-0.007365 max=0.008052 Jy/beam ! Clean residual mean=0.000027 rms=0.002061 Jy/beam ! Combined flux in latest and established models = 2.4208 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 69 components and 2.4208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073892Jy sigma=1.058558 ! Fit after self-cal, rms=0.073876Jy sigma=1.056698 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.571 mas, bmaj=16.49 mas, bpa=-4.337 degrees ! Estimated noise=2.05836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226823 Jy ! Component: 100 - total flux cleaned = 0.000333263 Jy ! Component: 150 - total flux cleaned = 0.000401844 Jy ! Component: 200 - total flux cleaned = 0.000401412 Jy ! Total flux subtracted in 200 components = 0.000401412 Jy ! Clean residual min=-0.006641 max=0.006800 Jy/beam ! Clean residual mean=0.000063 rms=0.002159 Jy/beam ! Combined flux in latest and established models = 2.4212 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 72 components and 2.4212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074060Jy sigma=1.057642 ! Fit after self-cal, rms=0.073971Jy sigma=1.055632 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.59 mas, bmaj=7.034 mas, bpa=-4.5 degrees ! Estimated noise=1.95737 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.68686 Jy ! Component: 100 - total flux cleaned = 2.10927 Jy ! Component: 150 - total flux cleaned = 2.27937 Jy ! Component: 200 - total flux cleaned = 2.35542 Jy ! Total flux subtracted in 200 components = 2.35542 Jy ! Clean residual min=-0.012960 max=0.024816 Jy/beam ! Clean residual mean=-0.000119 rms=0.004470 Jy/beam ! Combined flux in latest and established models = 2.35542 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 2.35542 Jy ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=8.307 mas, bpa=-6.729 degrees ! Estimated noise=1.58401 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0409908 Jy ! Component: 100 - total flux cleaned = 0.0567659 Jy ! Component: 150 - total flux cleaned = 0.063377 Jy ! Component: 200 - total flux cleaned = 0.0643999 Jy ! Total flux subtracted in 200 components = 0.0643999 Jy ! Clean residual min=-0.006854 max=0.006533 Jy/beam ! Clean residual mean=0.000024 rms=0.001871 Jy/beam ! Combined flux in latest and established models = 2.41982 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 64 components and 2.41982 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.571 mas, bmaj=16.49 mas, bpa=-4.337 degrees ! Estimated noise=2.05836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114128 Jy ! Component: 100 - total flux cleaned = 0.00103497 Jy ! Component: 150 - total flux cleaned = 0.00103913 Jy ! Component: 200 - total flux cleaned = 0.000978457 Jy ! Total flux subtracted in 200 components = 0.000978457 Jy ! Clean residual min=-0.006794 max=0.006345 Jy/beam ! Clean residual mean=0.000061 rms=0.002127 Jy/beam ! Combined flux in latest and established models = 2.4208 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 67 components and 2.4208 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=8.307 mas, bpa=-6.729 degrees ! Estimated noise=1.58401 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104214 Jy ! Component: 100 - total flux cleaned = 0.00127391 Jy ! Component: 150 - total flux cleaned = 0.0012612 Jy ! Component: 200 - total flux cleaned = 0.00118481 Jy ! Total flux subtracted in 200 components = 0.00118481 Jy ! Clean residual min=-0.006538 max=0.006717 Jy/beam ! Clean residual mean=0.000028 rms=0.001821 Jy/beam ! Combined flux in latest and established models = 2.42199 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 2.42199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071862Jy sigma=1.031013 ! Fit after self-cal, rms=0.071843Jy sigma=1.030208 wmodel J1507-1652_S_2005_05_12_yyk\_map.mod ! Writing 85 model components to file: J1507-1652_S_2005_05_12_yyk_map.mod wobs J1507-1652_S_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J1507-1652_S_2005_05_12_yyk_uvs.fits wwins J1507-1652_S_2005_05_12_yyk\_map.win ! wwins: Wrote 1 windows to J1507-1652_S_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153716 Jy ! Component: 100 - total flux cleaned = 0.000479951 Jy ! Component: 150 - total flux cleaned = 0.000684908 Jy ! Component: 200 - total flux cleaned = 0.000876178 Jy ! Component: 250 - total flux cleaned = 0.00078151 Jy ! Component: 300 - total flux cleaned = 0.000519059 Jy ! Component: 350 - total flux cleaned = 0.000434107 Jy ! Component: 400 - total flux cleaned = 0.000187347 Jy ! Component: 450 - total flux cleaned = -0.0002809 Jy ! Component: 500 - total flux cleaned = -0.000654419 Jy ! Component: 550 - total flux cleaned = -0.0010159 Jy ! Component: 600 - total flux cleaned = -0.0012243 Jy ! Component: 650 - total flux cleaned = -0.00129258 Jy ! Component: 700 - total flux cleaned = -0.00168777 Jy ! Component: 750 - total flux cleaned = -0.00188095 Jy ! Component: 800 - total flux cleaned = -0.00225595 Jy ! Component: 850 - total flux cleaned = -0.00243673 Jy ! Component: 900 - total flux cleaned = -0.00273206 Jy ! Component: 950 - total flux cleaned = -0.00290386 Jy ! Component: 1000 - total flux cleaned = -0.00301633 Jy ! Component: 1050 - total flux cleaned = -0.00323606 Jy ! Component: 1100 - total flux cleaned = -0.00350256 Jy ! Component: 1150 - total flux cleaned = -0.00371127 Jy ! Component: 1200 - total flux cleaned = -0.00371005 Jy ! Component: 1250 - total flux cleaned = -0.00391107 Jy ! Component: 1300 - total flux cleaned = -0.00415664 Jy ! Component: 1350 - total flux cleaned = -0.00434888 Jy ! Component: 1400 - total flux cleaned = -0.00449044 Jy ! Component: 1450 - total flux cleaned = -0.00476755 Jy ! Component: 1500 - total flux cleaned = -0.00485694 Jy ! Component: 1550 - total flux cleaned = -0.00490063 Jy ! Component: 1600 - total flux cleaned = -0.00511886 Jy ! Component: 1650 - total flux cleaned = -0.00533189 Jy ! Component: 1700 - total flux cleaned = -0.00554012 Jy ! Component: 1750 - total flux cleaned = -0.00553927 Jy ! Component: 1800 - total flux cleaned = -0.00566037 Jy ! Component: 1850 - total flux cleaned = -0.00577903 Jy ! Component: 1900 - total flux cleaned = -0.00597411 Jy ! Component: 1950 - total flux cleaned = -0.00601242 Jy ! Component: 2000 - total flux cleaned = -0.00605069 Jy ! Total flux subtracted in 2048 components = -0.00620013 Jy ! Clean residual min=-0.002631 max=0.002355 Jy/beam ! Clean residual mean=0.000017 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 2.41579 Jy keep ! Adding 129 model components to the UV plane model. ! The established model now contains 214 components and 2.41579 Jy ![Exited script file: muppet] wmap "J1507-1652_S_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.075 x 8.307 at -6.729 degrees (North through East) ! Clean map min=-0.0045076 max=1.9391 Jy/beam ! Writing clean map to FITS file: J1507-1652_S_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.93907 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000730077 device "J1507-1652_S_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J1507-1652_S_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.112953 0.112953 0.225906 0.451812 0.903623 1.80725 3.61449 7.22898 14.458 28.9159 57.8319 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.939 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.075 x 8.307 at -6.729 degrees (North through East) ! Clean map min=-0.0045076 max=1.9391 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1507-1652_S_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J1507-1652_S_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1507-1652_S_2005_05_12_yyk_uvs.log closed on Sat Oct 8 17:25:45 2005