! Started logfile: J1434-1146_X_2005_05_12_yyk_uvs.log on Sat Oct 8 17:24:18 2005 obs J1434-1146_X_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J1434-1146_X_2005_05_12_yyk_uve.fits ! AN table 1: 19 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.930994 visibilities/baseline/integration-bin. ! Found source: J1434-1146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1439 lines of history. ! ! Reading 3184 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1434-1146_X_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.123131 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7142 mas, bmaj=1.785 mas, bpa=-1.923 degrees ! Estimated noise=1.02429 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0934572 Jy ! Component: 100 - total flux cleaned = 0.109242 Jy ! Total flux subtracted in 100 components = 0.109242 Jy ! Clean residual min=-0.004164 max=0.004359 Jy/beam ! Clean residual mean=-0.000014 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.109242 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.109242 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.054104Jy sigma=1.014543 ! Fit after self-cal, rms=0.053991Jy sigma=1.011294 ! Inverting map and beam ! Estimated beam: bmin=0.7142 mas, bmaj=1.785 mas, bpa=-1.923 degrees ! Estimated noise=1.02429 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8699 mas, bmaj=2.205 mas, bpa=-2.572 degrees ! Estimated noise=0.660357 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00706487 Jy ! Component: 100 - total flux cleaned = 0.00929956 Jy ! Component: 150 - total flux cleaned = 0.00959774 Jy ! Component: 200 - total flux cleaned = 0.00976361 Jy ! Total flux subtracted in 200 components = 0.00976361 Jy ! Clean residual min=-0.002869 max=0.002589 Jy/beam ! Clean residual mean=-0.000000 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.119005 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 23 components and 0.119005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053413Jy sigma=0.998240 ! Fit after self-cal, rms=0.053408Jy sigma=0.998155 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8699 x 2.205 at -2.572 degrees (North through East) ! Clean map min=-0.0026932 max=0.11041 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00451 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.01 KP 0.95 ! LA 1.04 MK 1.02 NL 0.97 OV 1.01 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01225 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.05 KP 0.90 ! LA 1.05 MK 0.98 NL 0.96 OV 0.97 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.990869 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.94 KP 0.89 ! LA 1.03 MK 1.07 NL 1.00 OV 1.06 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.98249 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.00 KP 0.99 ! LA 1.00 MK 0.95 NL 1.06 OV 1.03 ! PT 1.10 SC 1.00* ! ! ! Fit before self-cal, rms=0.053408Jy sigma=0.998155 ! Fit after self-cal, rms=0.053023Jy sigma=0.989076 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053023Jy sigma=0.989076 ! Fit after self-cal, rms=0.053019Jy sigma=0.989054 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8751 mas, bmaj=2.22 mas, bpa=-2.655 degrees ! Estimated noise=0.65834 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000451019 Jy ! Component: 100 - total flux cleaned = -0.000410531 Jy ! Component: 150 - total flux cleaned = -0.000409975 Jy ! Component: 200 - total flux cleaned = -0.000395018 Jy ! Total flux subtracted in 200 components = -0.000395018 Jy ! Clean residual min=-0.002354 max=0.002643 Jy/beam ! Clean residual mean=-0.000001 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.11861 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.11861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053005Jy sigma=0.988770 ! Fit after self-cal, rms=0.053003Jy sigma=0.988727 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053003Jy sigma=0.988727 ! Fit after self-cal, rms=0.051380Jy sigma=0.952088 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000700255 Jy ! Component: 100 - total flux cleaned = 0.000714774 Jy ! Component: 150 - total flux cleaned = 0.000701179 Jy ! Component: 200 - total flux cleaned = 0.000711536 Jy ! Total flux subtracted in 200 components = 0.000711536 Jy ! Clean residual min=-0.002334 max=0.002402 Jy/beam ! Clean residual mean=-0.000001 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.119322 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.119322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051369Jy sigma=0.951852 ! Fit after self-cal, rms=0.051317Jy sigma=0.949926 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8751 x 2.22 at -2.655 degrees (North through East) ! Clean map min=-0.002209 max=0.11123 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051317Jy sigma=0.949926 ! Fit after self-cal, rms=0.051502Jy sigma=0.944704 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051502Jy sigma=0.944704 ! Fit after self-cal, rms=0.051510Jy sigma=0.944503 ! Inverting map and beam ! Estimated beam: bmin=0.873 mas, bmaj=2.221 mas, bpa=-2.783 degrees ! Estimated noise=0.657015 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -1.84641e-05 Jy ! Component: 100 - total flux cleaned = 6.35746e-05 Jy ! Component: 150 - total flux cleaned = 7.26503e-05 Jy ! Component: 200 - total flux cleaned = 7.25662e-05 Jy ! Total flux subtracted in 200 components = 7.25662e-05 Jy ! Clean residual min=-0.002275 max=0.002296 Jy/beam ! Clean residual mean=-0.000002 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.119394 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.119394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051506Jy sigma=0.944409 ! Fit after self-cal, rms=0.051511Jy sigma=0.944372 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051511Jy sigma=0.944372 ! Fit after self-cal, rms=0.051861Jy sigma=0.932478 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051861Jy sigma=0.932478 ! Fit after self-cal, rms=0.051869Jy sigma=0.932364 ! Inverting map and beam ! Estimated beam: bmin=0.8723 mas, bmaj=2.224 mas, bpa=-3.098 degrees ! Estimated noise=0.656477 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102743 Jy ! Component: 100 - total flux cleaned = 0.000168867 Jy ! Component: 150 - total flux cleaned = 0.000206199 Jy ! Component: 200 - total flux cleaned = 0.000220824 Jy ! Total flux subtracted in 200 components = 0.000220824 Jy ! Clean residual min=-0.002225 max=0.002217 Jy/beam ! Clean residual mean=-0.000002 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.119615 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.119615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051865Jy sigma=0.932254 ! Fit after self-cal, rms=0.051869Jy sigma=0.932229 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.347 mas, bmaj=4.38 mas, bpa=2.243 degrees ! Estimated noise=0.836311 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -7.75108e-05 Jy ! Component: 100 - total flux cleaned = -6.26645e-05 Jy ! Component: 150 - total flux cleaned = -5.14164e-05 Jy ! Component: 200 - total flux cleaned = -5.15835e-05 Jy ! Total flux subtracted in 200 components = -5.15835e-05 Jy ! Clean residual min=-0.002672 max=0.002592 Jy/beam ! Clean residual mean=-0.000004 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.119564 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 46 components and 0.119564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051871Jy sigma=0.932273 ! Fit after self-cal, rms=0.051872Jy sigma=0.932191 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7153 mas, bmaj=1.792 mas, bpa=-2.459 degrees ! Estimated noise=1.02702 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0944696 Jy ! Component: 100 - total flux cleaned = 0.109969 Jy ! Component: 150 - total flux cleaned = 0.115991 Jy ! Component: 200 - total flux cleaned = 0.118899 Jy ! Total flux subtracted in 200 components = 0.118899 Jy ! Clean residual min=-0.003996 max=0.003967 Jy/beam ! Clean residual mean=-0.000004 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.118899 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.118899 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8723 mas, bmaj=2.224 mas, bpa=-3.098 degrees ! Estimated noise=0.656477 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000925633 Jy ! Component: 100 - total flux cleaned = 0.00100592 Jy ! Component: 150 - total flux cleaned = 0.00100354 Jy ! Component: 200 - total flux cleaned = 0.000979786 Jy ! Total flux subtracted in 200 components = 0.000979786 Jy ! Clean residual min=-0.002240 max=0.002251 Jy/beam ! Clean residual mean=-0.000001 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.119879 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 23 components and 0.119879 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.347 mas, bmaj=4.38 mas, bpa=2.243 degrees ! Estimated noise=0.836311 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000249634 Jy ! Component: 100 - total flux cleaned = -0.000249422 Jy ! Component: 150 - total flux cleaned = -0.000234406 Jy ! Component: 200 - total flux cleaned = -0.00024509 Jy ! Total flux subtracted in 200 components = -0.00024509 Jy ! Clean residual min=-0.002647 max=0.002583 Jy/beam ! Clean residual mean=-0.000003 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.119634 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 28 components and 0.119634 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8723 mas, bmaj=2.224 mas, bpa=-3.098 degrees ! Estimated noise=0.656477 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -3.41995e-05 Jy ! Component: 100 - total flux cleaned = -3.71187e-05 Jy ! Component: 150 - total flux cleaned = 1.32316e-06 Jy ! Component: 200 - total flux cleaned = 1.88661e-05 Jy ! Total flux subtracted in 200 components = 1.88661e-05 Jy ! Clean residual min=-0.002224 max=0.002227 Jy/beam ! Clean residual mean=-0.000002 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.119653 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 39 components and 0.119653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051860Jy sigma=0.932484 ! Fit after self-cal, rms=0.051863Jy sigma=0.932389 wmodel J1434-1146_X_2005_05_12_yyk\_map.mod ! Writing 39 model components to file: J1434-1146_X_2005_05_12_yyk_map.mod wobs J1434-1146_X_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J1434-1146_X_2005_05_12_yyk_uvs.fits wwins J1434-1146_X_2005_05_12_yyk\_map.win ! wwins: Wrote 1 windows to J1434-1146_X_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.24363e-05 Jy ! Component: 100 - total flux cleaned = 3.49923e-05 Jy ! Component: 150 - total flux cleaned = 3.35398e-05 Jy ! Component: 200 - total flux cleaned = -7.17186e-05 Jy ! Component: 250 - total flux cleaned = -0.000172419 Jy ! Component: 300 - total flux cleaned = -0.000237483 Jy ! Component: 350 - total flux cleaned = -0.000301319 Jy ! Component: 400 - total flux cleaned = -0.00030188 Jy ! Component: 450 - total flux cleaned = -0.000389375 Jy ! Component: 500 - total flux cleaned = -0.000474665 Jy ! Component: 550 - total flux cleaned = -0.000585443 Jy ! Component: 600 - total flux cleaned = -0.000612585 Jy ! Component: 650 - total flux cleaned = -0.000691457 Jy ! Component: 700 - total flux cleaned = -0.000767447 Jy ! Component: 750 - total flux cleaned = -0.000841666 Jy ! Component: 800 - total flux cleaned = -0.000841945 Jy ! Component: 850 - total flux cleaned = -0.000913875 Jy ! Component: 900 - total flux cleaned = -0.000936843 Jy ! Component: 950 - total flux cleaned = -0.000936316 Jy ! Component: 1000 - total flux cleaned = -0.000891207 Jy ! Component: 1050 - total flux cleaned = -0.000935256 Jy ! Component: 1100 - total flux cleaned = -0.00102154 Jy ! Component: 1150 - total flux cleaned = -0.00106361 Jy ! Component: 1200 - total flux cleaned = -0.00108409 Jy ! Component: 1250 - total flux cleaned = -0.00104278 Jy ! Component: 1300 - total flux cleaned = -0.00106319 Jy ! Component: 1350 - total flux cleaned = -0.00106314 Jy ! Component: 1400 - total flux cleaned = -0.00110278 Jy ! Component: 1450 - total flux cleaned = -0.00119892 Jy ! Component: 1500 - total flux cleaned = -0.00121768 Jy ! Component: 1550 - total flux cleaned = -0.00121784 Jy ! Component: 1600 - total flux cleaned = -0.00125517 Jy ! Component: 1650 - total flux cleaned = -0.00132816 Jy ! Component: 1700 - total flux cleaned = -0.00134619 Jy ! Component: 1750 - total flux cleaned = -0.00141741 Jy ! Component: 1800 - total flux cleaned = -0.00143511 Jy ! Component: 1850 - total flux cleaned = -0.00145253 Jy ! Component: 1900 - total flux cleaned = -0.00153833 Jy ! Component: 1950 - total flux cleaned = -0.00157215 Jy ! Component: 2000 - total flux cleaned = -0.00157213 Jy ! Total flux subtracted in 2048 components = -0.00160538 Jy ! Clean residual min=-0.001076 max=0.001011 Jy/beam ! Clean residual mean=-0.000003 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.118047 Jy keep ! Adding 123 model components to the UV plane model. ! The established model now contains 162 components and 0.118047 Jy ![Exited script file: muppet] wmap "J1434-1146_X_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8723 x 2.224 at -3.098 degrees (North through East) ! Clean map min=-0.0016657 max=0.11138 Jy/beam ! Writing clean map to FITS file: J1434-1146_X_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.111382 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000305021 device "J1434-1146_X_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J1434-1146_X_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.821558 0.821558 1.64312 3.28623 6.57246 13.1449 26.2899 52.5797 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.111 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8723 x 2.224 at -3.098 degrees (North through East) ! Clean map min=-0.0016657 max=0.11138 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1434-1146_X_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J1434-1146_X_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1434-1146_X_2005_05_12_yyk_uvs.log closed on Sat Oct 8 17:24:22 2005