! Started logfile: J1423-2218_X_2005_05_12_yyk_uvs.log on Sat Oct 8 17:24:10 2005 obs J1423-2218_X_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J1423-2218_X_2005_05_12_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.860606 visibilities/baseline/integration-bin. ! Found source: J1423-2218 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1439 lines of history. ! ! Reading 1704 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1423-2218_X_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.156347 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8161 mas, bmaj=2.436 mas, bpa=13.15 degrees ! Estimated noise=1.53909 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.108111 Jy ! Component: 100 - total flux cleaned = 0.138205 Jy ! Total flux subtracted in 100 components = 0.138205 Jy ! Clean residual min=-0.008282 max=0.013927 Jy/beam ! Clean residual mean=-0.000077 rms=0.002306 Jy/beam ! Combined flux in latest and established models = 0.138205 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.138205 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.076394Jy sigma=1.145837 ! Fit after self-cal, rms=0.076194Jy sigma=1.140560 ! Inverting map and beam ! Estimated beam: bmin=0.8161 mas, bmaj=2.436 mas, bpa=13.15 degrees ! Estimated noise=1.53909 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.104 mas, bmaj=3.48 mas, bpa=15.37 degrees ! Estimated noise=1.1356 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, -1.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0219093 Jy ! Component: 100 - total flux cleaned = 0.0299844 Jy ! Component: 150 - total flux cleaned = 0.0313153 Jy ! Component: 200 - total flux cleaned = 0.0315388 Jy ! Total flux subtracted in 200 components = 0.0315388 Jy ! Clean residual min=-0.004148 max=0.004621 Jy/beam ! Clean residual mean=0.000003 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.169744 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 50 components and 0.169744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073117Jy sigma=1.039617 ! Fit after self-cal, rms=0.072968Jy sigma=1.037529 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.104 x 3.48 at 15.37 degrees (North through East) ! Clean map min=-0.003881 max=0.12654 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00631 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 1.00* KP 1.01 ! LA 1.00 MK 1.00* NL 1.04 OV 1.04 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.02396 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.92 HN 1.00* KP 0.96 ! LA 1.02 MK 0.99 NL 0.97 OV 0.97 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.995906 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.00* KP 0.96 ! LA 0.98 MK 1.00* NL 0.96 OV 1.09 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.97747 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.02 HN 1.00* KP 1.01 ! LA 0.93 MK 1.00* NL 0.99 OV 1.07 ! PT 1.12 SC 1.00* ! ! ! Fit before self-cal, rms=0.072968Jy sigma=1.037529 ! Fit after self-cal, rms=0.072632Jy sigma=1.022700 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072632Jy sigma=1.022700 ! Fit after self-cal, rms=0.072638Jy sigma=1.022583 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.11 mas, bmaj=3.502 mas, bpa=15.47 degrees ! Estimated noise=1.13222 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000974366 Jy ! Component: 100 - total flux cleaned = 0.00115193 Jy ! Component: 150 - total flux cleaned = 0.00115041 Jy ! Component: 200 - total flux cleaned = 0.0011498 Jy ! Total flux subtracted in 200 components = 0.0011498 Jy ! Clean residual min=-0.003868 max=0.003818 Jy/beam ! Clean residual mean=0.000018 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 0.170893 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 68 components and 0.170893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072593Jy sigma=1.020339 ! Fit after self-cal, rms=0.072572Jy sigma=1.020164 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072572Jy sigma=1.020164 ! Fit after self-cal, rms=0.069172Jy sigma=0.966531 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137018 Jy ! Component: 100 - total flux cleaned = 0.00146458 Jy ! Component: 150 - total flux cleaned = 0.00161767 Jy ! Component: 200 - total flux cleaned = 0.00161643 Jy ! Total flux subtracted in 200 components = 0.00161643 Jy ! Clean residual min=-0.003724 max=0.003559 Jy/beam ! Clean residual mean=0.000015 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.17251 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 81 components and 0.17251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069166Jy sigma=0.965509 ! Fit after self-cal, rms=0.068800Jy sigma=0.959829 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.11 x 3.502 at 15.47 degrees (North through East) ! Clean map min=-0.0035647 max=0.1264 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068800Jy sigma=0.959829 ! Fit after self-cal, rms=0.068186Jy sigma=0.951343 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068186Jy sigma=0.951343 ! Fit after self-cal, rms=0.068226Jy sigma=0.950423 ! Inverting map and beam ! Estimated beam: bmin=1.08 mas, bmaj=3.408 mas, bpa=15.15 degrees ! Estimated noise=1.12173 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104562 Jy ! Component: 100 - total flux cleaned = 0.000915513 Jy ! Component: 150 - total flux cleaned = 0.000874124 Jy ! Component: 200 - total flux cleaned = 0.000800556 Jy ! Total flux subtracted in 200 components = 0.000800556 Jy ! Clean residual min=-0.003665 max=0.003486 Jy/beam ! Clean residual mean=0.000001 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.17331 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 104 components and 0.17331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068224Jy sigma=0.949257 ! Fit after self-cal, rms=0.068262Jy sigma=0.949042 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068262Jy sigma=0.949042 ! Fit after self-cal, rms=0.068575Jy sigma=0.942981 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068575Jy sigma=0.942981 ! Fit after self-cal, rms=0.068602Jy sigma=0.942885 ! Inverting map and beam ! Estimated beam: bmin=1.082 mas, bmaj=3.386 mas, bpa=14.99 degrees ! Estimated noise=1.12968 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212768 Jy ! Component: 100 - total flux cleaned = 0.0033424 Jy ! Component: 150 - total flux cleaned = 0.00383216 Jy ! Component: 200 - total flux cleaned = 0.00392245 Jy ! Total flux subtracted in 200 components = 0.00392245 Jy ! Clean residual min=-0.003735 max=0.003660 Jy/beam ! Clean residual mean=-0.000007 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 0.177233 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 120 components and 0.177233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068550Jy sigma=0.941461 ! Fit after self-cal, rms=0.068560Jy sigma=0.941360 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.602 mas, bmaj=6.003 mas, bpa=6.815 degrees ! Estimated noise=1.30146 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000886225 Jy ! Component: 100 - total flux cleaned = 0.0012201 Jy ! Component: 150 - total flux cleaned = 0.0013178 Jy ! Component: 200 - total flux cleaned = 0.00136134 Jy ! Total flux subtracted in 200 components = 0.00136134 Jy ! Clean residual min=-0.003902 max=0.003590 Jy/beam ! Clean residual mean=-0.000005 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 0.178594 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 138 components and 0.178594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068567Jy sigma=0.941273 ! Fit after self-cal, rms=0.068574Jy sigma=0.941234 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8167 mas, bmaj=2.408 mas, bpa=12.6 degrees ! Estimated noise=1.54065 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.109475 Jy ! Component: 100 - total flux cleaned = 0.141315 Jy ! Component: 150 - total flux cleaned = 0.156399 Jy ! Component: 200 - total flux cleaned = 0.163764 Jy ! Total flux subtracted in 200 components = 0.163764 Jy ! Clean residual min=-0.005979 max=0.006462 Jy/beam ! Clean residual mean=-0.000026 rms=0.001553 Jy/beam ! Combined flux in latest and established models = 0.163764 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.163764 Jy ! Inverting map and beam ! Estimated beam: bmin=1.082 mas, bmaj=3.386 mas, bpa=14.99 degrees ! Estimated noise=1.12968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00865122 Jy ! Component: 100 - total flux cleaned = 0.0117227 Jy ! Component: 150 - total flux cleaned = 0.0123623 Jy ! Component: 200 - total flux cleaned = 0.0127794 Jy ! Total flux subtracted in 200 components = 0.0127794 Jy ! Clean residual min=-0.003888 max=0.003747 Jy/beam ! Clean residual mean=-0.000011 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.176543 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 59 components and 0.176543 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.602 mas, bmaj=6.003 mas, bpa=6.815 degrees ! Estimated noise=1.30146 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133635 Jy ! Component: 100 - total flux cleaned = 0.00152387 Jy ! Component: 150 - total flux cleaned = 0.00157449 Jy ! Component: 200 - total flux cleaned = 0.00162012 Jy ! Total flux subtracted in 200 components = 0.00162012 Jy ! Clean residual min=-0.003992 max=0.003665 Jy/beam ! Clean residual mean=-0.000007 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.178163 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 74 components and 0.178163 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.082 mas, bmaj=3.386 mas, bpa=14.99 degrees ! Estimated noise=1.12968 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000247281 Jy ! Component: 100 - total flux cleaned = -0.00020475 Jy ! Component: 150 - total flux cleaned = -0.000127116 Jy ! Component: 200 - total flux cleaned = -9.12825e-05 Jy ! Total flux subtracted in 200 components = -9.12825e-05 Jy ! Clean residual min=-0.003783 max=0.003688 Jy/beam ! Clean residual mean=-0.000004 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.178072 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 96 components and 0.178072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068630Jy sigma=0.942048 ! Fit after self-cal, rms=0.068631Jy sigma=0.941898 wmodel J1423-2218_X_2005_05_12_yyk\_map.mod ! Writing 96 model components to file: J1423-2218_X_2005_05_12_yyk_map.mod wobs J1423-2218_X_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J1423-2218_X_2005_05_12_yyk_uvs.fits wwins J1423-2218_X_2005_05_12_yyk\_map.win ! wwins: Wrote 2 windows to J1423-2218_X_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000295895 Jy ! Component: 100 - total flux cleaned = -0.000837588 Jy ! Component: 150 - total flux cleaned = -0.00133385 Jy ! Component: 200 - total flux cleaned = -0.00180019 Jy ! Component: 250 - total flux cleaned = -0.00224706 Jy ! Component: 300 - total flux cleaned = -0.00253373 Jy ! Component: 350 - total flux cleaned = -0.00271858 Jy ! Component: 400 - total flux cleaned = -0.00289729 Jy ! Component: 450 - total flux cleaned = -0.00302485 Jy ! Component: 500 - total flux cleaned = -0.00314964 Jy ! Component: 550 - total flux cleaned = -0.00331196 Jy ! Component: 600 - total flux cleaned = -0.00358782 Jy ! Component: 650 - total flux cleaned = -0.00385738 Jy ! Component: 700 - total flux cleaned = -0.00400825 Jy ! Component: 750 - total flux cleaned = -0.00419257 Jy ! Component: 800 - total flux cleaned = -0.00440873 Jy ! Component: 850 - total flux cleaned = -0.00458467 Jy ! Component: 900 - total flux cleaned = -0.00468831 Jy ! Component: 950 - total flux cleaned = -0.00482507 Jy ! Component: 1000 - total flux cleaned = -0.0049259 Jy ! Component: 1050 - total flux cleaned = -0.00512244 Jy ! Component: 1100 - total flux cleaned = -0.00525086 Jy ! Component: 1150 - total flux cleaned = -0.00531339 Jy ! Component: 1200 - total flux cleaned = -0.00540665 Jy ! Component: 1250 - total flux cleaned = -0.00549806 Jy ! Component: 1300 - total flux cleaned = -0.00561781 Jy ! Component: 1350 - total flux cleaned = -0.00573482 Jy ! Component: 1400 - total flux cleaned = -0.00576359 Jy ! Component: 1450 - total flux cleaned = -0.00582017 Jy ! Component: 1500 - total flux cleaned = -0.00579236 Jy ! Component: 1550 - total flux cleaned = -0.00582008 Jy ! Component: 1600 - total flux cleaned = -0.00590152 Jy ! Component: 1650 - total flux cleaned = -0.00592835 Jy ! Component: 1700 - total flux cleaned = -0.00592847 Jy ! Component: 1750 - total flux cleaned = -0.00598071 Jy ! Component: 1800 - total flux cleaned = -0.00595516 Jy ! Component: 1850 - total flux cleaned = -0.00603138 Jy ! Component: 1900 - total flux cleaned = -0.00608207 Jy ! Component: 1950 - total flux cleaned = -0.00618077 Jy ! Component: 2000 - total flux cleaned = -0.00622961 Jy ! Total flux subtracted in 2048 components = -0.00625397 Jy ! Clean residual min=-0.001441 max=0.001399 Jy/beam ! Clean residual mean=-0.000004 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.171818 Jy keep ! Adding 116 model components to the UV plane model. ! The established model now contains 212 components and 0.171818 Jy ![Exited script file: muppet] wmap "J1423-2218_X_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.082 x 3.386 at 14.99 degrees (North through East) ! Clean map min=-0.0027805 max=0.12495 Jy/beam ! Writing clean map to FITS file: J1423-2218_X_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.124953 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000456514 device "J1423-2218_X_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J1423-2218_X_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.09604 1.09604 2.19209 4.38418 8.76836 17.5367 35.0734 70.1469 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.124 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.082 x 3.386 at 14.99 degrees (North through East) ! Clean map min=-0.0027805 max=0.12495 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1423-2218_X_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J1423-2218_X_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1423-2218_X_2005_05_12_yyk_uvs.log closed on Sat Oct 8 17:24:14 2005