! Started logfile: J1423-2218_S_2005_05_12_yyk_uvs.log on Sat Oct 8 17:24:06 2005 obs J1423-2218_S_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J1423-2218_S_2005_05_12_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.860606 visibilities/baseline/integration-bin. ! Found source: J1423-2218 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1443 lines of history. ! ! Reading 1704 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1423-2218_S_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.17754 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=7.327 mas, bpa=4.913 degrees ! Estimated noise=1.52893 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.125248 Jy ! Component: 100 - total flux cleaned = 0.153286 Jy ! Total flux subtracted in 100 components = 0.153286 Jy ! Clean residual min=-0.007331 max=0.009334 Jy/beam ! Clean residual mean=-0.000013 rms=0.002179 Jy/beam ! Combined flux in latest and established models = 0.153286 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.153286 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.088999Jy sigma=1.206462 ! Fit after self-cal, rms=0.088878Jy sigma=1.195729 ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=7.327 mas, bpa=4.913 degrees ! Estimated noise=1.52893 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.555 mas, bmaj=9.52 mas, bpa=4.971 degrees ! Estimated noise=1.00147 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00969472 Jy ! Component: 100 - total flux cleaned = 0.0135781 Jy ! Component: 150 - total flux cleaned = 0.0148169 Jy ! Component: 200 - total flux cleaned = 0.015129 Jy ! Total flux subtracted in 200 components = 0.015129 Jy ! Clean residual min=-0.005048 max=0.005256 Jy/beam ! Clean residual mean=-0.000056 rms=0.001517 Jy/beam ! Combined flux in latest and established models = 0.168415 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.168415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087609Jy sigma=1.180013 ! Fit after self-cal, rms=0.087585Jy sigma=1.179850 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.555 x 9.52 at 4.971 degrees (North through East) ! Clean map min=-0.004893 max=0.13846 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.012 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 0.99 KP 0.98 ! LA 0.96 MK 0.89 NL 1.02 OV 0.97 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.087585Jy sigma=1.179850 ! Fit after self-cal, rms=0.087790Jy sigma=1.178875 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087790Jy sigma=1.178875 ! Fit after self-cal, rms=0.087780Jy sigma=1.178814 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.521 mas, bmaj=9.427 mas, bpa=4.676 degrees ! Estimated noise=1.00389 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150861 Jy ! Component: 100 - total flux cleaned = 0.00150951 Jy ! Component: 150 - total flux cleaned = 0.00154864 Jy ! Component: 200 - total flux cleaned = 0.00154609 Jy ! Total flux subtracted in 200 components = 0.00154609 Jy ! Clean residual min=-0.005102 max=0.005199 Jy/beam ! Clean residual mean=-0.000057 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 0.169961 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.169961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087692Jy sigma=1.178053 ! Fit after self-cal, rms=0.087683Jy sigma=1.177977 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087683Jy sigma=1.177977 ! Fit after self-cal, rms=0.086558Jy sigma=1.092455 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187072 Jy ! Component: 100 - total flux cleaned = 0.00206015 Jy ! Component: 150 - total flux cleaned = 0.00217361 Jy ! Component: 200 - total flux cleaned = 0.0022699 Jy ! Total flux subtracted in 200 components = 0.0022699 Jy ! Clean residual min=-0.004445 max=0.005011 Jy/beam ! Clean residual mean=-0.000054 rms=0.001354 Jy/beam ! Combined flux in latest and established models = 0.172231 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 44 components and 0.172231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086411Jy sigma=1.091279 ! Fit after self-cal, rms=0.086582Jy sigma=1.085617 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.521 x 9.427 at 4.676 degrees (North through East) ! Clean map min=-0.0043065 max=0.14009 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086582Jy sigma=1.085617 ! Fit after self-cal, rms=0.084283Jy sigma=1.074992 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084283Jy sigma=1.074992 ! Fit after self-cal, rms=0.084379Jy sigma=1.074226 ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=9.434 mas, bpa=4.425 degrees ! Estimated noise=0.99507 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00079923 Jy ! Component: 100 - total flux cleaned = -0.000801491 Jy ! Component: 150 - total flux cleaned = -0.000743089 Jy ! Component: 200 - total flux cleaned = -0.000689694 Jy ! Total flux subtracted in 200 components = -0.000689694 Jy ! Clean residual min=-0.004840 max=0.004607 Jy/beam ! Clean residual mean=-0.000041 rms=0.001267 Jy/beam ! Combined flux in latest and established models = 0.171541 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.171541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084393Jy sigma=1.073689 ! Fit after self-cal, rms=0.084433Jy sigma=1.073517 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084433Jy sigma=1.073517 ! Fit after self-cal, rms=0.084043Jy sigma=1.067633 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084043Jy sigma=1.067633 ! Fit after self-cal, rms=0.084052Jy sigma=1.067543 ! Inverting map and beam ! Estimated beam: bmin=3.537 mas, bmaj=9.477 mas, bpa=3.979 degrees ! Estimated noise=0.993453 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000880478 Jy ! Component: 100 - total flux cleaned = -0.000950485 Jy ! Component: 150 - total flux cleaned = -0.000922603 Jy ! Component: 200 - total flux cleaned = -0.000872547 Jy ! Total flux subtracted in 200 components = -0.000872547 Jy ! Clean residual min=-0.004707 max=0.004428 Jy/beam ! Clean residual mean=-0.000042 rms=0.001245 Jy/beam ! Combined flux in latest and established models = 0.170668 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.170668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084051Jy sigma=1.067056 ! Fit after self-cal, rms=0.084053Jy sigma=1.067015 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.003 mas, bmaj=19.36 mas, bpa=5.86 degrees ! Estimated noise=1.20847 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000934648 Jy ! Component: 100 - total flux cleaned = 0.00113214 Jy ! Component: 150 - total flux cleaned = 0.00127125 Jy ! Component: 200 - total flux cleaned = 0.0013669 Jy ! Total flux subtracted in 200 components = 0.0013669 Jy ! Clean residual min=-0.004836 max=0.005314 Jy/beam ! Clean residual mean=-0.000072 rms=0.001572 Jy/beam ! Combined flux in latest and established models = 0.172035 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 62 components and 0.172035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084064Jy sigma=1.067232 ! Fit after self-cal, rms=0.084071Jy sigma=1.067045 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=7.334 mas, bpa=4.445 degrees ! Estimated noise=1.5158 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.126263 Jy ! Component: 100 - total flux cleaned = 0.154858 Jy ! Component: 150 - total flux cleaned = 0.163619 Jy ! Component: 200 - total flux cleaned = 0.168138 Jy ! Total flux subtracted in 200 components = 0.168138 Jy ! Clean residual min=-0.006829 max=0.007758 Jy/beam ! Clean residual mean=-0.000013 rms=0.001905 Jy/beam ! Combined flux in latest and established models = 0.168138 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.168138 Jy ! Inverting map and beam ! Estimated beam: bmin=3.537 mas, bmaj=9.477 mas, bpa=3.979 degrees ! Estimated noise=0.993453 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123816 Jy ! Component: 100 - total flux cleaned = 0.00138535 Jy ! Component: 150 - total flux cleaned = 0.00150694 Jy ! Component: 200 - total flux cleaned = 0.00165638 Jy ! Total flux subtracted in 200 components = 0.00165638 Jy ! Clean residual min=-0.004643 max=0.004435 Jy/beam ! Clean residual mean=-0.000038 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 0.169795 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.169795 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.003 mas, bmaj=19.36 mas, bpa=5.86 degrees ! Estimated noise=1.20847 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161981 Jy ! Component: 100 - total flux cleaned = 0.00178213 Jy ! Component: 150 - total flux cleaned = 0.00189352 Jy ! Component: 200 - total flux cleaned = 0.00199713 Jy ! Total flux subtracted in 200 components = 0.00199713 Jy ! Clean residual min=-0.004856 max=0.005392 Jy/beam ! Clean residual mean=-0.000067 rms=0.001573 Jy/beam ! Combined flux in latest and established models = 0.171792 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 46 components and 0.171792 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.537 mas, bmaj=9.477 mas, bpa=3.979 degrees ! Estimated noise=0.993453 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000772073 Jy ! Component: 100 - total flux cleaned = -0.000769529 Jy ! Component: 150 - total flux cleaned = -0.000769745 Jy ! Component: 200 - total flux cleaned = -0.000771146 Jy ! Total flux subtracted in 200 components = -0.000771146 Jy ! Clean residual min=-0.004632 max=0.004449 Jy/beam ! Clean residual mean=-0.000040 rms=0.001244 Jy/beam ! Combined flux in latest and established models = 0.171021 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.171021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084081Jy sigma=1.067877 ! Fit after self-cal, rms=0.084074Jy sigma=1.067713 wmodel J1423-2218_S_2005_05_12_yyk\_map.mod ! Writing 57 model components to file: J1423-2218_S_2005_05_12_yyk_map.mod wobs J1423-2218_S_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J1423-2218_S_2005_05_12_yyk_uvs.fits wwins J1423-2218_S_2005_05_12_yyk\_map.win ! wwins: Wrote 1 windows to J1423-2218_S_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000410363 Jy ! Component: 100 - total flux cleaned = 0.000766166 Jy ! Component: 150 - total flux cleaned = 0.00116458 Jy ! Component: 200 - total flux cleaned = 0.00135475 Jy ! Component: 250 - total flux cleaned = 0.00147562 Jy ! Component: 300 - total flux cleaned = 0.0015318 Jy ! Component: 350 - total flux cleaned = 0.00141826 Jy ! Component: 400 - total flux cleaned = 0.00141797 Jy ! Component: 450 - total flux cleaned = 0.00131251 Jy ! Component: 500 - total flux cleaned = 0.00126146 Jy ! Component: 550 - total flux cleaned = 0.0012117 Jy ! Component: 600 - total flux cleaned = 0.00111382 Jy ! Component: 650 - total flux cleaned = 0.00116076 Jy ! Component: 700 - total flux cleaned = 0.00129829 Jy ! Component: 750 - total flux cleaned = 0.00116283 Jy ! Component: 800 - total flux cleaned = 0.00120753 Jy ! Component: 850 - total flux cleaned = 0.00120761 Jy ! Component: 900 - total flux cleaned = 0.00124832 Jy ! Component: 950 - total flux cleaned = 0.00116481 Jy ! Component: 1000 - total flux cleaned = 0.00120521 Jy ! Component: 1050 - total flux cleaned = 0.00132426 Jy ! Component: 1100 - total flux cleaned = 0.00136275 Jy ! Component: 1150 - total flux cleaned = 0.00147853 Jy ! Component: 1200 - total flux cleaned = 0.00151684 Jy ! Component: 1250 - total flux cleaned = 0.00159158 Jy ! Component: 1300 - total flux cleaned = 0.00162802 Jy ! Component: 1350 - total flux cleaned = 0.00151936 Jy ! Component: 1400 - total flux cleaned = 0.00173609 Jy ! Component: 1450 - total flux cleaned = 0.00184227 Jy ! Component: 1500 - total flux cleaned = 0.00187781 Jy ! Component: 1550 - total flux cleaned = 0.00201673 Jy ! Component: 1600 - total flux cleaned = 0.00205123 Jy ! Component: 1650 - total flux cleaned = 0.00211835 Jy ! Component: 1700 - total flux cleaned = 0.00208515 Jy ! Component: 1750 - total flux cleaned = 0.00211827 Jy ! Component: 1800 - total flux cleaned = 0.00221552 Jy ! Component: 1850 - total flux cleaned = 0.0022472 Jy ! Component: 1900 - total flux cleaned = 0.00231038 Jy ! Component: 1950 - total flux cleaned = 0.0023727 Jy ! Component: 2000 - total flux cleaned = 0.00231171 Jy ! Total flux subtracted in 2048 components = 0.00243391 Jy ! Clean residual min=-0.001721 max=0.002018 Jy/beam ! Clean residual mean=-0.000002 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.173455 Jy keep ! Adding 132 model components to the UV plane model. ! The established model now contains 189 components and 0.173455 Jy ![Exited script file: muppet] wmap "J1423-2218_S_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.537 x 9.477 at 3.979 degrees (North through East) ! Clean map min=-0.0034845 max=0.13865 Jy/beam ! Writing clean map to FITS file: J1423-2218_S_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.13865 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000631025 device "J1423-2218_S_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J1423-2218_S_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.36536 1.36536 2.73073 5.46146 10.9229 21.8458 43.6916 87.3833 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.138 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.537 x 9.477 at 3.979 degrees (North through East) ! Clean map min=-0.0034845 max=0.13865 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1423-2218_S_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J1423-2218_S_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1423-2218_S_2005_05_12_yyk_uvs.log closed on Sat Oct 8 17:24:10 2005