! Started logfile: J1331-2639_X_2005_05_12_yyk_uvs.log on Sat Oct 8 17:22:26 2005 obs J1331-2639_X_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J1331-2639_X_2005_05_12_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.89899 visibilities/baseline/integration-bin. ! Found source: J1331-2639 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1439 lines of history. ! ! Reading 1780 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1331-2639_X_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.157131 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6748 mas, bmaj=1.697 mas, bpa=2.883 degrees ! Estimated noise=1.61066 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.115411 Jy ! Component: 100 - total flux cleaned = 0.138929 Jy ! Total flux subtracted in 100 components = 0.138929 Jy ! Clean residual min=-0.006930 max=0.007581 Jy/beam ! Clean residual mean=-0.000013 rms=0.001901 Jy/beam ! Combined flux in latest and established models = 0.138929 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.138929 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.068033Jy sigma=1.048164 ! Fit after self-cal, rms=0.067826Jy sigma=1.043566 ! Inverting map and beam ! Estimated beam: bmin=0.6748 mas, bmaj=1.697 mas, bpa=2.883 degrees ! Estimated noise=1.61066 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.892 mas, bmaj=2.279 mas, bpa=-0.8139 degrees ! Estimated noise=1.089 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124321 Jy ! Component: 100 - total flux cleaned = 0.0163899 Jy ! Component: 150 - total flux cleaned = 0.0174396 Jy ! Component: 200 - total flux cleaned = 0.0175363 Jy ! Total flux subtracted in 200 components = 0.0175363 Jy ! Clean residual min=-0.003968 max=0.005405 Jy/beam ! Clean residual mean=-0.000003 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.156465 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.156465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066517Jy sigma=1.012823 ! Fit after self-cal, rms=0.066467Jy sigma=1.012475 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.892 x 2.279 at -0.8139 degrees (North through East) ! Clean map min=-0.0038582 max=0.13805 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0072 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.00* KP 0.97 ! LA 1.01 MK 0.99 NL 1.03 OV 1.08 ! PT 0.93 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00563 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.00* KP 0.88 ! LA 1.01 MK 1.01 NL 1.03 OV 0.95 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.997711 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.00* KP 0.88 ! LA 0.99 MK 1.02 NL 1.01 OV 1.02 ! PT 1.06 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.976682 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 1.00* KP 1.01 ! LA 0.95 MK 1.02 NL 1.08 OV 1.00 ! PT 1.09 SC 1.00* ! ! ! Fit before self-cal, rms=0.066467Jy sigma=1.012475 ! Fit after self-cal, rms=0.065986Jy sigma=0.997579 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065986Jy sigma=0.997579 ! Fit after self-cal, rms=0.065984Jy sigma=0.997428 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8952 mas, bmaj=2.283 mas, bpa=-0.4162 degrees ! Estimated noise=1.0841 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000332447 Jy ! Component: 100 - total flux cleaned = -0.000428578 Jy ! Component: 150 - total flux cleaned = -0.000506885 Jy ! Component: 200 - total flux cleaned = -0.000571701 Jy ! Total flux subtracted in 200 components = -0.000571701 Jy ! Clean residual min=-0.004198 max=0.004566 Jy/beam ! Clean residual mean=-0.000007 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.155893 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 22 components and 0.155893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065946Jy sigma=0.996570 ! Fit after self-cal, rms=0.065908Jy sigma=0.996319 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065908Jy sigma=0.996319 ! Fit after self-cal, rms=0.063357Jy sigma=0.953024 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000696492 Jy ! Component: 100 - total flux cleaned = 0.000735959 Jy ! Component: 150 - total flux cleaned = 0.000770108 Jy ! Component: 200 - total flux cleaned = 0.000798631 Jy ! Total flux subtracted in 200 components = 0.000798631 Jy ! Clean residual min=-0.004104 max=0.004262 Jy/beam ! Clean residual mean=-0.000006 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.156692 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 0.156692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063330Jy sigma=0.952397 ! Fit after self-cal, rms=0.063161Jy sigma=0.949287 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8952 x 2.283 at -0.4162 degrees (North through East) ! Clean map min=-0.0038165 max=0.139 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063161Jy sigma=0.949287 ! Fit after self-cal, rms=0.063370Jy sigma=0.940182 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063370Jy sigma=0.940182 ! Fit after self-cal, rms=0.063384Jy sigma=0.939794 ! Inverting map and beam ! Estimated beam: bmin=0.8901 mas, bmaj=2.263 mas, bpa=-0.2192 degrees ! Estimated noise=1.08086 mJy/beam. ! Added new window around map position (-1.8, 2.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00414657 Jy ! Component: 100 - total flux cleaned = 0.00460313 Jy ! Component: 150 - total flux cleaned = 0.00464286 Jy ! Component: 200 - total flux cleaned = 0.00464345 Jy ! Total flux subtracted in 200 components = 0.00464345 Jy ! Clean residual min=-0.004087 max=0.003010 Jy/beam ! Clean residual mean=-0.000008 rms=0.000941 Jy/beam ! Combined flux in latest and established models = 0.161335 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 44 components and 0.161335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063163Jy sigma=0.935545 ! Fit after self-cal, rms=0.063124Jy sigma=0.935235 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063124Jy sigma=0.935235 ! Fit after self-cal, rms=0.062631Jy sigma=0.928552 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062631Jy sigma=0.928552 ! Fit after self-cal, rms=0.062624Jy sigma=0.928430 ! Inverting map and beam ! Estimated beam: bmin=0.8905 mas, bmaj=2.257 mas, bpa=0.3903 degrees ! Estimated noise=1.07359 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000375465 Jy ! Component: 100 - total flux cleaned = -0.000374953 Jy ! Component: 150 - total flux cleaned = -0.000373228 Jy ! Component: 200 - total flux cleaned = -0.000405374 Jy ! Total flux subtracted in 200 components = -0.000405374 Jy ! Clean residual min=-0.003996 max=0.003140 Jy/beam ! Clean residual mean=-0.000004 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.16093 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 57 components and 0.16093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062576Jy sigma=0.927610 ! Fit after self-cal, rms=0.062571Jy sigma=0.927557 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.612 mas, bmaj=6.834 mas, bpa=8.993 degrees ! Estimated noise=1.33571 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118078 Jy ! Component: 100 - total flux cleaned = 7.86529e-05 Jy ! Component: 150 - total flux cleaned = -2.7863e-05 Jy ! Component: 200 - total flux cleaned = -6.21803e-05 Jy ! Total flux subtracted in 200 components = -6.21803e-05 Jy ! Clean residual min=-0.004765 max=0.002993 Jy/beam ! Clean residual mean=-0.000008 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 0.160868 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 65 components and 0.160868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062545Jy sigma=0.927359 ! Fit after self-cal, rms=0.062547Jy sigma=0.927322 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6733 mas, bmaj=1.697 mas, bpa=3.484 degrees ! Estimated noise=1.58773 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.115423 Jy ! Component: 100 - total flux cleaned = 0.13988 Jy ! Component: 150 - total flux cleaned = 0.150343 Jy ! Component: 200 - total flux cleaned = 0.155233 Jy ! Total flux subtracted in 200 components = 0.155233 Jy ! Clean residual min=-0.005450 max=0.005986 Jy/beam ! Clean residual mean=-0.000005 rms=0.001447 Jy/beam ! Combined flux in latest and established models = 0.155233 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.155233 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8905 mas, bmaj=2.257 mas, bpa=0.3903 degrees ! Estimated noise=1.07359 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378843 Jy ! Component: 100 - total flux cleaned = 0.00520198 Jy ! Component: 150 - total flux cleaned = 0.0053859 Jy ! Component: 200 - total flux cleaned = 0.00549399 Jy ! Total flux subtracted in 200 components = 0.00549399 Jy ! Clean residual min=-0.004048 max=0.003065 Jy/beam ! Clean residual mean=-0.000004 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.160727 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 39 components and 0.160727 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.612 mas, bmaj=6.834 mas, bpa=8.993 degrees ! Estimated noise=1.33571 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209157 Jy ! Component: 100 - total flux cleaned = 1.70103e-05 Jy ! Component: 150 - total flux cleaned = 1.93818e-05 Jy ! Component: 200 - total flux cleaned = -1.86322e-05 Jy ! Total flux subtracted in 200 components = -1.86322e-05 Jy ! Clean residual min=-0.004813 max=0.003006 Jy/beam ! Clean residual mean=-0.000008 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.160708 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.160708 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8905 mas, bmaj=2.257 mas, bpa=0.3903 degrees ! Estimated noise=1.07359 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000262728 Jy ! Component: 100 - total flux cleaned = 0.00021297 Jy ! Component: 150 - total flux cleaned = 0.000128525 Jy ! Component: 200 - total flux cleaned = 4.89114e-05 Jy ! Total flux subtracted in 200 components = 4.89114e-05 Jy ! Clean residual min=-0.003956 max=0.003099 Jy/beam ! Clean residual mean=-0.000005 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.160757 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.160757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062539Jy sigma=0.927978 ! Fit after self-cal, rms=0.062524Jy sigma=0.927878 wmodel J1331-2639_X_2005_05_12_yyk\_map.mod ! Writing 57 model components to file: J1331-2639_X_2005_05_12_yyk_map.mod wobs J1331-2639_X_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J1331-2639_X_2005_05_12_yyk_uvs.fits wwins J1331-2639_X_2005_05_12_yyk\_map.win ! wwins: Wrote 2 windows to J1331-2639_X_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122299 Jy ! Component: 100 - total flux cleaned = -0.00139253 Jy ! Component: 150 - total flux cleaned = -0.00123664 Jy ! Component: 200 - total flux cleaned = -0.00118775 Jy ! Component: 250 - total flux cleaned = -0.00123507 Jy ! Component: 300 - total flux cleaned = -0.00123402 Jy ! Component: 350 - total flux cleaned = -0.00127764 Jy ! Component: 400 - total flux cleaned = -0.00140692 Jy ! Component: 450 - total flux cleaned = -0.00161685 Jy ! Component: 500 - total flux cleaned = -0.00186217 Jy ! Component: 550 - total flux cleaned = -0.00198275 Jy ! Component: 600 - total flux cleaned = -0.00217684 Jy ! Component: 650 - total flux cleaned = -0.00213823 Jy ! Component: 700 - total flux cleaned = -0.00224938 Jy ! Component: 750 - total flux cleaned = -0.00221318 Jy ! Component: 800 - total flux cleaned = -0.00239231 Jy ! Component: 850 - total flux cleaned = -0.00232125 Jy ! Component: 900 - total flux cleaned = -0.00225222 Jy ! Component: 950 - total flux cleaned = -0.00238861 Jy ! Component: 1000 - total flux cleaned = -0.00235495 Jy ! Component: 1050 - total flux cleaned = -0.00232226 Jy ! Component: 1100 - total flux cleaned = -0.00232261 Jy ! Component: 1150 - total flux cleaned = -0.00229092 Jy ! Component: 1200 - total flux cleaned = -0.00232309 Jy ! Component: 1250 - total flux cleaned = -0.00226158 Jy ! Component: 1300 - total flux cleaned = -0.0022012 Jy ! Component: 1350 - total flux cleaned = -0.00214134 Jy ! Component: 1400 - total flux cleaned = -0.0021121 Jy ! Component: 1450 - total flux cleaned = -0.00214138 Jy ! Component: 1500 - total flux cleaned = -0.00208392 Jy ! Component: 1550 - total flux cleaned = -0.00188367 Jy ! Component: 1600 - total flux cleaned = -0.00191215 Jy ! Component: 1650 - total flux cleaned = -0.00185631 Jy ! Component: 1700 - total flux cleaned = -0.00177364 Jy ! Component: 1750 - total flux cleaned = -0.00171888 Jy ! Component: 1800 - total flux cleaned = -0.00163776 Jy ! Component: 1850 - total flux cleaned = -0.00155795 Jy ! Component: 1900 - total flux cleaned = -0.00150536 Jy ! Component: 1950 - total flux cleaned = -0.00147919 Jy ! Component: 2000 - total flux cleaned = -0.00137626 Jy ! Total flux subtracted in 2048 components = -0.00130028 Jy ! Clean residual min=-0.001502 max=0.001451 Jy/beam ! Clean residual mean=-0.000006 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.159457 Jy keep ! Adding 161 model components to the UV plane model. ! The established model now contains 218 components and 0.159457 Jy ![Exited script file: muppet] wmap "J1331-2639_X_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8905 x 2.257 at 0.3903 degrees (North through East) ! Clean map min=-0.002938 max=0.13907 Jy/beam ! Writing clean map to FITS file: J1331-2639_X_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.139069 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000492325 device "J1331-2639_X_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J1331-2639_X_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.06204 1.06204 2.12409 4.24818 8.49636 16.9927 33.9854 67.9709 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.139 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8905 x 2.257 at 0.3903 degrees (North through East) ! Clean map min=-0.002938 max=0.13907 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1331-2639_X_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J1331-2639_X_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1331-2639_X_2005_05_12_yyk_uvs.log closed on Sat Oct 8 17:22:30 2005