! Started logfile: J1331-2639_S_2005_05_12_yyk_uvs.log on Sat Oct 8 17:22:22 2005 obs J1331-2639_S_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J1331-2639_S_2005_05_12_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.757576 visibilities/baseline/integration-bin. ! Found source: J1331-2639 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1443 lines of history. ! ! Reading 1500 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1331-2639_S_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.132942 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.813 mas, bmaj=15.11 mas, bpa=-17.08 degrees ! Estimated noise=2.39262 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0789213 Jy ! Component: 100 - total flux cleaned = 0.0996229 Jy ! Total flux subtracted in 100 components = 0.0996229 Jy ! Clean residual min=-0.012374 max=0.012636 Jy/beam ! Clean residual mean=0.000034 rms=0.003673 Jy/beam ! Combined flux in latest and established models = 0.0996229 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0996229 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.084832Jy sigma=1.166155 ! Fit after self-cal, rms=0.079564Jy sigma=1.095675 ! Inverting map and beam ! Estimated beam: bmin=2.813 mas, bmaj=15.11 mas, bpa=-17.08 degrees ! Estimated noise=2.39262 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.066 mas, bmaj=17.19 mas, bpa=-16.98 degrees ! Estimated noise=1.54813 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.012846 Jy ! Component: 100 - total flux cleaned = 0.0136973 Jy ! Component: 150 - total flux cleaned = 0.013996 Jy ! Component: 200 - total flux cleaned = 0.0140949 Jy ! Total flux subtracted in 200 components = 0.0140949 Jy ! Clean residual min=-0.006166 max=0.005257 Jy/beam ! Clean residual mean=0.000059 rms=0.001707 Jy/beam ! Combined flux in latest and established models = 0.113718 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 0.113718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077235Jy sigma=1.061159 ! Fit after self-cal, rms=0.077148Jy sigma=1.060507 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.066 x 17.19 at -16.98 degrees (North through East) ! Clean map min=-0.0062276 max=0.10274 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00975 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.00* KP 0.89 ! LA 0.97 MK 0.99 NL 1.03 OV 0.97 ! PT 1.12 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01294 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.15 HN 1.00* KP 0.93 ! LA 0.96 MK 1.02 NL 0.98 OV 0.85 ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.077148Jy sigma=1.060507 ! Fit after self-cal, rms=0.075491Jy sigma=1.051137 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075491Jy sigma=1.051137 ! Fit after self-cal, rms=0.075444Jy sigma=1.050831 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.131 mas, bmaj=17.17 mas, bpa=-16.99 degrees ! Estimated noise=1.53646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000559603 Jy ! Component: 100 - total flux cleaned = -0.000568204 Jy ! Component: 150 - total flux cleaned = -0.000517735 Jy ! Component: 200 - total flux cleaned = -0.000608119 Jy ! Total flux subtracted in 200 components = -0.000608119 Jy ! Clean residual min=-0.006187 max=0.005196 Jy/beam ! Clean residual mean=0.000125 rms=0.001545 Jy/beam ! Combined flux in latest and established models = 0.11311 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 39 components and 0.11311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075350Jy sigma=1.049166 ! Fit after self-cal, rms=0.075300Jy sigma=1.048784 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075300Jy sigma=1.048784 ! Fit after self-cal, rms=0.072645Jy sigma=0.968740 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243405 Jy ! Component: 100 - total flux cleaned = 0.00239355 Jy ! Component: 150 - total flux cleaned = 0.00231 Jy ! Component: 200 - total flux cleaned = 0.0022008 Jy ! Total flux subtracted in 200 components = 0.0022008 Jy ! Clean residual min=-0.005069 max=0.005660 Jy/beam ! Clean residual mean=0.000084 rms=0.001398 Jy/beam ! Combined flux in latest and established models = 0.115311 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 57 components and 0.115311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072477Jy sigma=0.966510 ! Fit after self-cal, rms=0.072345Jy sigma=0.961789 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.131 x 17.17 at -16.99 degrees (North through East) ! Clean map min=-0.0056687 max=0.10592 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072345Jy sigma=0.961789 ! Fit after self-cal, rms=0.072140Jy sigma=0.955324 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072140Jy sigma=0.955324 ! Fit after self-cal, rms=0.072175Jy sigma=0.954734 ! Inverting map and beam ! Estimated beam: bmin=4.097 mas, bmaj=17.25 mas, bpa=-17.04 degrees ! Estimated noise=1.52426 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000605875 Jy ! Component: 100 - total flux cleaned = -0.000801442 Jy ! Component: 150 - total flux cleaned = -0.000989085 Jy ! Component: 200 - total flux cleaned = -0.00109496 Jy ! Total flux subtracted in 200 components = -0.00109496 Jy ! Clean residual min=-0.004826 max=0.005388 Jy/beam ! Clean residual mean=0.000021 rms=0.001327 Jy/beam ! Combined flux in latest and established models = 0.114216 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 65 components and 0.114216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072145Jy sigma=0.954093 ! Fit after self-cal, rms=0.072150Jy sigma=0.953984 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072150Jy sigma=0.953984 ! Fit after self-cal, rms=0.073490Jy sigma=0.955793 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073490Jy sigma=0.955793 ! Fit after self-cal, rms=0.073505Jy sigma=0.955630 ! Inverting map and beam ! Estimated beam: bmin=3.954 mas, bmaj=17.41 mas, bpa=-16.98 degrees ! Estimated noise=1.53571 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190191 Jy ! Component: 100 - total flux cleaned = 0.00214546 Jy ! Component: 150 - total flux cleaned = 0.00218062 Jy ! Component: 200 - total flux cleaned = 0.00214897 Jy ! Total flux subtracted in 200 components = 0.00214897 Jy ! Clean residual min=-0.004768 max=0.005196 Jy/beam ! Clean residual mean=0.000057 rms=0.001331 Jy/beam ! Combined flux in latest and established models = 0.116365 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 0.116365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073444Jy sigma=0.954361 ! Fit after self-cal, rms=0.073443Jy sigma=0.954330 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.798 mas, bmaj=24.61 mas, bpa=5.101 degrees ! Estimated noise=1.7579 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000370627 Jy ! Component: 100 - total flux cleaned = 0.000415245 Jy ! Component: 150 - total flux cleaned = 0.000415516 Jy ! Component: 200 - total flux cleaned = 0.000396829 Jy ! Total flux subtracted in 200 components = 0.000396829 Jy ! Clean residual min=-0.004808 max=0.004855 Jy/beam ! Clean residual mean=0.000084 rms=0.001495 Jy/beam ! Combined flux in latest and established models = 0.116761 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 87 components and 0.116761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073449Jy sigma=0.954227 ! Fit after self-cal, rms=0.073445Jy sigma=0.954193 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.788 mas, bmaj=15.36 mas, bpa=-17.14 degrees ! Estimated noise=2.3829 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0878593 Jy ! Component: 100 - total flux cleaned = 0.105808 Jy ! Component: 150 - total flux cleaned = 0.1121 Jy ! Component: 200 - total flux cleaned = 0.114432 Jy ! Total flux subtracted in 200 components = 0.114432 Jy ! Clean residual min=-0.006641 max=0.006551 Jy/beam ! Clean residual mean=0.000023 rms=0.001960 Jy/beam ! Combined flux in latest and established models = 0.114432 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.114432 Jy ! Inverting map and beam ! Estimated beam: bmin=3.954 mas, bmaj=17.41 mas, bpa=-16.98 degrees ! Estimated noise=1.53571 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306541 Jy ! Component: 100 - total flux cleaned = 0.00327959 Jy ! Component: 150 - total flux cleaned = 0.00336959 Jy ! Component: 200 - total flux cleaned = 0.00329961 Jy ! Total flux subtracted in 200 components = 0.00329961 Jy ! Clean residual min=-0.004710 max=0.005208 Jy/beam ! Clean residual mean=0.000047 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 0.117732 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 45 components and 0.117732 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.798 mas, bmaj=24.61 mas, bpa=5.101 degrees ! Estimated noise=1.7579 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000367187 Jy ! Component: 100 - total flux cleaned = 0.000291786 Jy ! Component: 150 - total flux cleaned = 0.000260488 Jy ! Component: 200 - total flux cleaned = 0.000206289 Jy ! Total flux subtracted in 200 components = 0.000206289 Jy ! Clean residual min=-0.004874 max=0.004692 Jy/beam ! Clean residual mean=0.000072 rms=0.001508 Jy/beam ! Combined flux in latest and established models = 0.117938 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.117938 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.954 mas, bmaj=17.41 mas, bpa=-16.98 degrees ! Estimated noise=1.53571 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00028984 Jy ! Component: 100 - total flux cleaned = -0.000373788 Jy ! Component: 150 - total flux cleaned = -0.000411655 Jy ! Component: 200 - total flux cleaned = -0.000448399 Jy ! Total flux subtracted in 200 components = -0.000448399 Jy ! Clean residual min=-0.004659 max=0.005199 Jy/beam ! Clean residual mean=0.000049 rms=0.001334 Jy/beam ! Combined flux in latest and established models = 0.11749 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 65 components and 0.11749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073480Jy sigma=0.954460 ! Fit after self-cal, rms=0.073465Jy sigma=0.954324 wmodel J1331-2639_S_2005_05_12_yyk\_map.mod ! Writing 65 model components to file: J1331-2639_S_2005_05_12_yyk_map.mod wobs J1331-2639_S_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J1331-2639_S_2005_05_12_yyk_uvs.fits wwins J1331-2639_S_2005_05_12_yyk\_map.win ! wwins: Wrote 1 windows to J1331-2639_S_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111004 Jy ! Component: 100 - total flux cleaned = 0.00168296 Jy ! Component: 150 - total flux cleaned = 0.00221905 Jy ! Component: 200 - total flux cleaned = 0.00271879 Jy ! Component: 250 - total flux cleaned = 0.00307338 Jy ! Component: 300 - total flux cleaned = 0.00318623 Jy ! Component: 350 - total flux cleaned = 0.00318652 Jy ! Component: 400 - total flux cleaned = 0.00313448 Jy ! Component: 450 - total flux cleaned = 0.00308273 Jy ! Component: 500 - total flux cleaned = 0.0029357 Jy ! Component: 550 - total flux cleaned = 0.00279253 Jy ! Component: 600 - total flux cleaned = 0.00265354 Jy ! Component: 650 - total flux cleaned = 0.00256279 Jy ! Component: 700 - total flux cleaned = 0.00243044 Jy ! Component: 750 - total flux cleaned = 0.00251468 Jy ! Component: 800 - total flux cleaned = 0.00251337 Jy ! Component: 850 - total flux cleaned = 0.00259495 Jy ! Component: 900 - total flux cleaned = 0.0026338 Jy ! Component: 950 - total flux cleaned = 0.00255521 Jy ! Component: 1000 - total flux cleaned = 0.00263166 Jy ! Component: 1050 - total flux cleaned = 0.0024425 Jy ! Component: 1100 - total flux cleaned = 0.00229494 Jy ! Component: 1150 - total flux cleaned = 0.00229549 Jy ! Component: 1200 - total flux cleaned = 0.00218817 Jy ! Component: 1250 - total flux cleaned = 0.00201339 Jy ! Component: 1300 - total flux cleaned = 0.00187587 Jy ! Component: 1350 - total flux cleaned = 0.00184175 Jy ! Component: 1400 - total flux cleaned = 0.00163997 Jy ! Component: 1450 - total flux cleaned = 0.00154006 Jy ! Component: 1500 - total flux cleaned = 0.00137691 Jy ! Component: 1550 - total flux cleaned = 0.00131307 Jy ! Component: 1600 - total flux cleaned = 0.00128167 Jy ! Component: 1650 - total flux cleaned = 0.00118791 Jy ! Component: 1700 - total flux cleaned = 0.00112594 Jy ! Component: 1750 - total flux cleaned = 0.000973035 Jy ! Component: 1800 - total flux cleaned = 0.000882612 Jy ! Component: 1850 - total flux cleaned = 0.000673395 Jy ! Component: 1900 - total flux cleaned = 0.00061443 Jy ! Component: 1950 - total flux cleaned = 0.000438822 Jy ! Component: 2000 - total flux cleaned = 0.000236289 Jy ! Total flux subtracted in 2048 components = 9.29336e-05 Jy ! Clean residual min=-0.001642 max=0.001603 Jy/beam ! Clean residual mean=0.000009 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.117583 Jy keep ! Adding 116 model components to the UV plane model. ! The established model now contains 181 components and 0.117583 Jy ![Exited script file: muppet] wmap "J1331-2639_S_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.954 x 17.41 at -16.98 degrees (North through East) ! Clean map min=-0.0057223 max=0.10376 Jy/beam ! Writing clean map to FITS file: J1331-2639_S_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.103755 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000593111 device "J1331-2639_S_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J1331-2639_S_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.71493 1.71493 3.42986 6.85973 13.7195 27.4389 54.8778 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.103 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.954 x 17.41 at -16.98 degrees (North through East) ! Clean map min=-0.0057223 max=0.10376 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1331-2639_S_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J1331-2639_S_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1331-2639_S_2005_05_12_yyk_uvs.log closed on Sat Oct 8 17:22:26 2005