! Started logfile: J1246-2547_S_2005_06_30_yyk_uvs.log on Sat Oct 8 22:56:42 2005 obs J1246-2547_S_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J1246-2547_S_2005_06_30_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1246-2547 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1468 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1246-2547_S_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.563321 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.315 mas, bmaj=7.053 mas, bpa=6.775 degrees ! Estimated noise=2.62559 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.433073 Jy ! Component: 100 - total flux cleaned = 0.551897 Jy ! Total flux subtracted in 100 components = 0.551897 Jy ! Clean residual min=-0.027601 max=0.046337 Jy/beam ! Clean residual mean=0.000294 rms=0.009561 Jy/beam ! Combined flux in latest and established models = 0.551897 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.551897 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158856Jy sigma=2.225894 ! Fit after self-cal, rms=0.158736Jy sigma=2.223433 ! Inverting map and beam ! Estimated beam: bmin=2.315 mas, bmaj=7.053 mas, bpa=6.775 degrees ! Estimated noise=2.62559 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.145 mas, bmaj=8.021 mas, bpa=3.738 degrees ! Estimated noise=1.80918 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0633165 Jy ! Component: 100 - total flux cleaned = 0.0924422 Jy ! Component: 150 - total flux cleaned = 0.0993347 Jy ! Component: 200 - total flux cleaned = 0.103411 Jy ! Total flux subtracted in 200 components = 0.103411 Jy ! Clean residual min=-0.028319 max=0.031186 Jy/beam ! Clean residual mean=0.000220 rms=0.008330 Jy/beam ! Combined flux in latest and established models = 0.655308 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 28 components and 0.655308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136131Jy sigma=1.939384 ! Fit after self-cal, rms=0.135983Jy sigma=1.937748 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.145 x 8.021 at 3.738 degrees (North through East) ! Clean map min=-0.02693 max=0.46347 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02682 ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.98 HN 1.31 KP 0.94 ! LA 1.05 MK 0.88 NL 0.93 OV 0.94 ! PT 1.02 SC 0.87 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.982616 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 1.37 KP 0.97 ! LA 1.00 MK 0.96 NL 0.97 OV 1.01 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.915194 ! Telescope amplitude corrections in sub-array 1: ! BR 1.63 FD 0.90 HN 1.27 KP 0.97 ! LA 0.92 MK 1.09 NL 1.04 OV 0.98 ! PT 1.05 SC 1.07 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.04073 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.93 HN 1.15 KP 0.86 ! LA 0.78 MK 1.10 NL 0.95 OV 0.84 ! PT 0.94 SC 1.11 ! ! ! Fit before self-cal, rms=0.135983Jy sigma=1.937748 ! Fit after self-cal, rms=0.111277Jy sigma=1.415998 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111277Jy sigma=1.415998 ! Fit after self-cal, rms=0.111272Jy sigma=1.415385 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=8.261 mas, bpa=4.073 degrees ! Estimated noise=1.75648 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0210281 Jy ! Component: 100 - total flux cleaned = -0.0247572 Jy ! Component: 150 - total flux cleaned = -0.025891 Jy ! Component: 200 - total flux cleaned = -0.0266759 Jy ! Total flux subtracted in 200 components = -0.0266759 Jy ! Clean residual min=-0.010224 max=0.014722 Jy/beam ! Clean residual mean=0.000274 rms=0.003654 Jy/beam ! Combined flux in latest and established models = 0.628632 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.628632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109271Jy sigma=1.366515 ! Fit after self-cal, rms=0.109095Jy sigma=1.365545 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109095Jy sigma=1.365545 ! Fit after self-cal, rms=0.107570Jy sigma=1.341355 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 6.21736e-05 Jy ! Component: 100 - total flux cleaned = 6.99144e-05 Jy ! Component: 150 - total flux cleaned = -0.000123726 Jy ! Component: 200 - total flux cleaned = -0.000212705 Jy ! Total flux subtracted in 200 components = -0.000212705 Jy ! Clean residual min=-0.009658 max=0.014722 Jy/beam ! Clean residual mean=0.000276 rms=0.003612 Jy/beam ! Combined flux in latest and established models = 0.62842 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.62842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107190Jy sigma=1.338028 ! Fit after self-cal, rms=0.107017Jy sigma=1.335917 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.22 x 8.261 at 4.073 degrees (North through East) ! Clean map min=-0.0093466 max=0.46869 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107017Jy sigma=1.335917 ! Fit after self-cal, rms=0.091542Jy sigma=1.039157 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091542Jy sigma=1.039157 ! Fit after self-cal, rms=0.091552Jy sigma=1.039013 ! Inverting map and beam ! Estimated beam: bmin=3.212 mas, bmaj=8.273 mas, bpa=3.974 degrees ! Estimated noise=1.74886 mJy/beam. ! Added new window around map position (-14, 37.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158044 Jy ! Component: 100 - total flux cleaned = 0.0223055 Jy ! Component: 150 - total flux cleaned = 0.0228436 Jy ! Component: 200 - total flux cleaned = 0.0233285 Jy ! Total flux subtracted in 200 components = 0.0233285 Jy ! Clean residual min=-0.008568 max=0.009133 Jy/beam ! Clean residual mean=0.000115 rms=0.002596 Jy/beam ! Combined flux in latest and established models = 0.651748 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 71 components and 0.651748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089554Jy sigma=0.998842 ! Fit after self-cal, rms=0.089398Jy sigma=0.997311 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089398Jy sigma=0.997311 ! Fit after self-cal, rms=0.088077Jy sigma=0.976074 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088077Jy sigma=0.976074 ! Fit after self-cal, rms=0.088078Jy sigma=0.976061 ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=8.259 mas, bpa=3.912 degrees ! Estimated noise=1.74302 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319347 Jy ! Component: 100 - total flux cleaned = 0.00355475 Jy ! Component: 150 - total flux cleaned = 0.00399214 Jy ! Component: 200 - total flux cleaned = 0.00450381 Jy ! Total flux subtracted in 200 components = 0.00450381 Jy ! Clean residual min=-0.007512 max=0.008784 Jy/beam ! Clean residual mean=0.000107 rms=0.002289 Jy/beam ! Combined flux in latest and established models = 0.656252 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 83 components and 0.656252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087529Jy sigma=0.966970 ! Fit after self-cal, rms=0.087445Jy sigma=0.966419 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.346 mas, bmaj=22.31 mas, bpa=12.71 degrees ! Estimated noise=2.18123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000404218 Jy ! Component: 100 - total flux cleaned = 0.00170344 Jy ! Component: 150 - total flux cleaned = 0.00217479 Jy ! Component: 200 - total flux cleaned = 0.00232927 Jy ! Total flux subtracted in 200 components = 0.00232927 Jy ! Clean residual min=-0.007402 max=0.009807 Jy/beam ! Clean residual mean=0.000168 rms=0.003060 Jy/beam ! Combined flux in latest and established models = 0.658581 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 97 components and 0.658581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087305Jy sigma=0.963981 ! Fit after self-cal, rms=0.087158Jy sigma=0.962720 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.344 mas, bmaj=7.081 mas, bpa=7.132 degrees ! Estimated noise=2.52166 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.415667 Jy ! Component: 100 - total flux cleaned = 0.522367 Jy ! Component: 150 - total flux cleaned = 0.567236 Jy ! Component: 200 - total flux cleaned = 0.59144 Jy ! Total flux subtracted in 200 components = 0.59144 Jy ! Clean residual min=-0.011775 max=0.014177 Jy/beam ! Clean residual mean=0.000175 rms=0.003514 Jy/beam ! Combined flux in latest and established models = 0.59144 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.59144 Jy ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=8.259 mas, bpa=3.912 degrees ! Estimated noise=1.74302 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221279 Jy ! Component: 100 - total flux cleaned = 0.0356405 Jy ! Component: 150 - total flux cleaned = 0.0450982 Jy ! Component: 200 - total flux cleaned = 0.0503739 Jy ! Total flux subtracted in 200 components = 0.0503739 Jy ! Clean residual min=-0.006511 max=0.008991 Jy/beam ! Clean residual mean=0.000216 rms=0.002375 Jy/beam ! Combined flux in latest and established models = 0.641814 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 71 components and 0.641814 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.346 mas, bmaj=22.31 mas, bpa=12.71 degrees ! Estimated noise=2.18123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00796174 Jy ! Component: 100 - total flux cleaned = 0.011901 Jy ! Component: 150 - total flux cleaned = 0.0130181 Jy ! Component: 200 - total flux cleaned = 0.0134345 Jy ! Total flux subtracted in 200 components = 0.0134345 Jy ! Clean residual min=-0.007296 max=0.008761 Jy/beam ! Clean residual mean=0.000212 rms=0.003001 Jy/beam ! Combined flux in latest and established models = 0.655249 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 82 components and 0.655249 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=8.259 mas, bpa=3.912 degrees ! Estimated noise=1.74302 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012874 Jy ! Component: 100 - total flux cleaned = -0.00114494 Jy ! Component: 150 - total flux cleaned = -0.00103384 Jy ! Component: 200 - total flux cleaned = -0.000937014 Jy ! Total flux subtracted in 200 components = -0.000937014 Jy ! Clean residual min=-0.006334 max=0.007390 Jy/beam ! Clean residual mean=0.000113 rms=0.002088 Jy/beam ! Combined flux in latest and established models = 0.654312 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 98 components and 0.654312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086343Jy sigma=0.955725 ! Fit after self-cal, rms=0.086239Jy sigma=0.955072 wmodel J1246-2547_S_2005_06_30_yyk\_map.mod ! Writing 98 model components to file: J1246-2547_S_2005_06_30_yyk_map.mod wobs J1246-2547_S_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J1246-2547_S_2005_06_30_yyk_uvs.fits wwins J1246-2547_S_2005_06_30_yyk\_map.win ! wwins: Wrote 2 windows to J1246-2547_S_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327717 Jy ! Component: 100 - total flux cleaned = 0.0050814 Jy ! Component: 150 - total flux cleaned = 0.00629841 Jy ! Component: 200 - total flux cleaned = 0.00686364 Jy ! Component: 250 - total flux cleaned = 0.0075725 Jy ! Component: 300 - total flux cleaned = 0.00807671 Jy ! Component: 350 - total flux cleaned = 0.00863965 Jy ! Component: 400 - total flux cleaned = 0.00887004 Jy ! Component: 450 - total flux cleaned = 0.00938441 Jy ! Component: 500 - total flux cleaned = 0.00966781 Jy ! Component: 550 - total flux cleaned = 0.01001 Jy ! Component: 600 - total flux cleaned = 0.0104042 Jy ! Component: 650 - total flux cleaned = 0.0107201 Jy ! Component: 700 - total flux cleaned = 0.01072 Jy ! Component: 750 - total flux cleaned = 0.0109618 Jy ! Component: 800 - total flux cleaned = 0.0109622 Jy ! Component: 850 - total flux cleaned = 0.0112439 Jy ! Component: 900 - total flux cleaned = 0.0115177 Jy ! Component: 950 - total flux cleaned = 0.011733 Jy ! Component: 1000 - total flux cleaned = 0.0118897 Jy ! Component: 1050 - total flux cleaned = 0.0119397 Jy ! Component: 1100 - total flux cleaned = 0.0121395 Jy ! Component: 1150 - total flux cleaned = 0.0121388 Jy ! Component: 1200 - total flux cleaned = 0.0121868 Jy ! Component: 1250 - total flux cleaned = 0.0123765 Jy ! Component: 1300 - total flux cleaned = 0.0124225 Jy ! Component: 1350 - total flux cleaned = 0.0124675 Jy ! Component: 1400 - total flux cleaned = 0.0124235 Jy ! Component: 1450 - total flux cleaned = 0.012511 Jy ! Component: 1500 - total flux cleaned = 0.0125118 Jy ! Component: 1550 - total flux cleaned = 0.0126378 Jy ! Component: 1600 - total flux cleaned = 0.0127619 Jy ! Component: 1650 - total flux cleaned = 0.0128842 Jy ! Component: 1700 - total flux cleaned = 0.0129245 Jy ! Component: 1750 - total flux cleaned = 0.013241 Jy ! Component: 1800 - total flux cleaned = 0.0133568 Jy ! Component: 1850 - total flux cleaned = 0.0134337 Jy ! Component: 1900 - total flux cleaned = 0.0137364 Jy ! Component: 1950 - total flux cleaned = 0.0139227 Jy ! Component: 2000 - total flux cleaned = 0.0139961 Jy ! Total flux subtracted in 2048 components = 0.0142133 Jy ! Clean residual min=-0.002283 max=0.001821 Jy/beam ! Clean residual mean=-0.000001 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.668525 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 228 components and 0.668525 Jy ![Exited script file: muppet] wmap "J1246-2547_S_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.206 x 8.259 at 3.912 degrees (North through East) ! Clean map min=-0.0061385 max=0.48294 Jy/beam ! Writing clean map to FITS file: J1246-2547_S_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.482938 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000743979 device "J1246-2547_S_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1246-2547_S_2005_06_30_yyk_map.eps/VPS' loglevs 2*100*3*image_rms/peak_flux ! The new contour levels are: ! -0.924316 0.924316 1.84863 3.69727 7.39453 14.7891 29.5781 59.1563 print "clev=",int(2*3*image_rms*10000)/10000 ! clev= 0.0044 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.482 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.206 x 8.259 at 3.912 degrees (North through East) ! Clean map min=-0.0061385 max=0.48294 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1246-2547_S_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1246-2547_S_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1246-2547_S_2005_06_30_yyk_uvs.log closed on Sat Oct 8 22:56:46 2005