! Started logfile: J1226-1328_S_2005_06_30_yyk_uvs.log on Sat Oct 8 17:20:44 2005 obs J1226-1328_S_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J1226-1328_S_2005_06_30_yyk_uve.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.888889 visibilities/baseline/integration-bin. ! Found source: J1226-1328 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1469 lines of history. ! ! Reading 2080 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1226-1328_S_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.156543 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.541 mas, bmaj=6.623 mas, bpa=-0.7743 degrees ! Estimated noise=1.45462 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.112358 Jy ! Component: 100 - total flux cleaned = 0.127909 Jy ! Total flux subtracted in 100 components = 0.127909 Jy ! Clean residual min=-0.006607 max=0.007201 Jy/beam ! Clean residual mean=-0.000005 rms=0.001772 Jy/beam ! Combined flux in latest and established models = 0.127909 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.127909 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.087281Jy sigma=1.104399 ! Fit after self-cal, rms=0.086772Jy sigma=1.094684 ! Inverting map and beam ! Estimated beam: bmin=2.541 mas, bmaj=6.623 mas, bpa=-0.7743 degrees ! Estimated noise=1.45462 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.128 mas, bmaj=8.113 mas, bpa=-3.003 degrees ! Estimated noise=0.911366 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457123 Jy ! Component: 100 - total flux cleaned = 0.00614124 Jy ! Component: 150 - total flux cleaned = 0.00636479 Jy ! Component: 200 - total flux cleaned = 0.00639098 Jy ! Total flux subtracted in 200 components = 0.00639098 Jy ! Clean residual min=-0.003612 max=0.003463 Jy/beam ! Clean residual mean=-0.000030 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.1343 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.1343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086617Jy sigma=1.091043 ! Fit after self-cal, rms=0.086612Jy sigma=1.090910 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.128 x 8.113 at -3.003 degrees (North through East) ! Clean map min=-0.0035336 max=0.12767 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02433 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.91 KP 0.96 ! LA 1.03 MK 0.90 NL 0.90 OV 0.99 ! PT 1.11 SC 0.98 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.99704 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 HN 0.93 KP 0.99 ! LA 1.03 MK 1.04 NL 0.99 OV 1.00 ! PT 1.03 SC 0.94 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.086612Jy sigma=1.090910 ! Fit after self-cal, rms=0.085985Jy sigma=1.085315 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085985Jy sigma=1.085315 ! Fit after self-cal, rms=0.085982Jy sigma=1.085267 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=8.001 mas, bpa=-3.031 degrees ! Estimated noise=0.916608 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235169 Jy ! Component: 100 - total flux cleaned = 0.00303201 Jy ! Component: 150 - total flux cleaned = 0.00319568 Jy ! Component: 200 - total flux cleaned = 0.00326773 Jy ! Total flux subtracted in 200 components = 0.00326773 Jy ! Clean residual min=-0.003420 max=0.003473 Jy/beam ! Clean residual mean=0.000022 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.137567 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 33 components and 0.137567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085953Jy sigma=1.084200 ! Fit after self-cal, rms=0.085949Jy sigma=1.084139 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085949Jy sigma=1.084139 ! Fit after self-cal, rms=0.081451Jy sigma=1.028600 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139319 Jy ! Component: 100 - total flux cleaned = 0.00154946 Jy ! Component: 150 - total flux cleaned = 0.00167507 Jy ! Component: 200 - total flux cleaned = 0.00177928 Jy ! Total flux subtracted in 200 components = 0.00177928 Jy ! Clean residual min=-0.003601 max=0.003536 Jy/beam ! Clean residual mean=0.000019 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.139347 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 44 components and 0.139347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081395Jy sigma=1.028054 ! Fit after self-cal, rms=0.080767Jy sigma=1.021835 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.073 x 8.001 at -3.031 degrees (North through East) ! Clean map min=-0.0035007 max=0.12923 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080767Jy sigma=1.021835 ! Fit after self-cal, rms=0.080230Jy sigma=1.017808 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080230Jy sigma=1.017808 ! Fit after self-cal, rms=0.080237Jy sigma=1.017018 ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=7.941 mas, bpa=-3.149 degrees ! Estimated noise=0.911676 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000520393 Jy ! Component: 100 - total flux cleaned = 0.00067892 Jy ! Component: 150 - total flux cleaned = 0.000740037 Jy ! Component: 200 - total flux cleaned = 0.00077567 Jy ! Total flux subtracted in 200 components = 0.00077567 Jy ! Clean residual min=-0.003696 max=0.003489 Jy/beam ! Clean residual mean=0.000017 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.140122 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 47 components and 0.140122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080235Jy sigma=1.016685 ! Fit after self-cal, rms=0.080273Jy sigma=1.016553 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080273Jy sigma=1.016553 ! Fit after self-cal, rms=0.080628Jy sigma=1.008988 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080628Jy sigma=1.008988 ! Fit after self-cal, rms=0.080643Jy sigma=1.008869 ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=7.924 mas, bpa=-3.039 degrees ! Estimated noise=0.91478 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142857 Jy ! Component: 100 - total flux cleaned = 0.00155764 Jy ! Component: 150 - total flux cleaned = 0.00155916 Jy ! Component: 200 - total flux cleaned = 0.00156044 Jy ! Total flux subtracted in 200 components = 0.00156044 Jy ! Clean residual min=-0.003777 max=0.003364 Jy/beam ! Clean residual mean=0.000025 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.141683 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.141683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080615Jy sigma=1.008339 ! Fit after self-cal, rms=0.080621Jy sigma=1.008310 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.829 mas, bmaj=15.9 mas, bpa=5.675 degrees ! Estimated noise=1.18614 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 8.36274e-05 Jy ! Component: 100 - total flux cleaned = -1.63619e-05 Jy ! Component: 150 - total flux cleaned = -0.000108693 Jy ! Component: 200 - total flux cleaned = -0.000137853 Jy ! Total flux subtracted in 200 components = -0.000137853 Jy ! Clean residual min=-0.003636 max=0.003530 Jy/beam ! Clean residual mean=0.000055 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.141545 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 51 components and 0.141545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080635Jy sigma=1.008341 ! Fit after self-cal, rms=0.080624Jy sigma=1.008236 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.51 mas, bmaj=6.564 mas, bpa=-0.9539 degrees ! Estimated noise=1.42503 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.112053 Jy ! Component: 100 - total flux cleaned = 0.129281 Jy ! Component: 150 - total flux cleaned = 0.136307 Jy ! Component: 200 - total flux cleaned = 0.140064 Jy ! Total flux subtracted in 200 components = 0.140064 Jy ! Clean residual min=-0.005685 max=0.005630 Jy/beam ! Clean residual mean=0.000005 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.140064 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.140064 Jy ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=7.924 mas, bpa=-3.039 degrees ! Estimated noise=0.91478 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136832 Jy ! Component: 100 - total flux cleaned = 0.0013696 Jy ! Component: 150 - total flux cleaned = 0.0014045 Jy ! Component: 200 - total flux cleaned = 0.001373 Jy ! Total flux subtracted in 200 components = 0.001373 Jy ! Clean residual min=-0.003871 max=0.003397 Jy/beam ! Clean residual mean=0.000025 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.141437 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 40 components and 0.141437 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.829 mas, bmaj=15.9 mas, bpa=5.675 degrees ! Estimated noise=1.18614 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296238 Jy ! Component: 100 - total flux cleaned = 0.00026048 Jy ! Component: 150 - total flux cleaned = 0.000227254 Jy ! Component: 200 - total flux cleaned = 0.000164023 Jy ! Total flux subtracted in 200 components = 0.000164023 Jy ! Clean residual min=-0.003663 max=0.003530 Jy/beam ! Clean residual mean=0.000054 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 0.141601 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 42 components and 0.141601 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=7.924 mas, bpa=-3.039 degrees ! Estimated noise=0.91478 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000130427 Jy ! Component: 100 - total flux cleaned = -0.000102363 Jy ! Component: 150 - total flux cleaned = -7.80158e-05 Jy ! Component: 200 - total flux cleaned = -7.9111e-05 Jy ! Total flux subtracted in 200 components = -7.9111e-05 Jy ! Clean residual min=-0.003894 max=0.003428 Jy/beam ! Clean residual mean=0.000025 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.141522 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.141522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080630Jy sigma=1.008534 ! Fit after self-cal, rms=0.080629Jy sigma=1.008490 wmodel J1226-1328_S_2005_06_30_yyk\_map.mod ! Writing 50 model components to file: J1226-1328_S_2005_06_30_yyk_map.mod wobs J1226-1328_S_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J1226-1328_S_2005_06_30_yyk_uvs.fits wwins J1226-1328_S_2005_06_30_yyk\_map.win ! wwins: Wrote 1 windows to J1226-1328_S_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000452417 Jy ! Component: 100 - total flux cleaned = -0.000185667 Jy ! Component: 150 - total flux cleaned = 6.60999e-05 Jy ! Component: 200 - total flux cleaned = 0.000113023 Jy ! Component: 250 - total flux cleaned = 0.000203543 Jy ! Component: 300 - total flux cleaned = 0.000421486 Jy ! Component: 350 - total flux cleaned = 0.000547948 Jy ! Component: 400 - total flux cleaned = 0.000712331 Jy ! Component: 450 - total flux cleaned = 0.000953381 Jy ! Component: 500 - total flux cleaned = 0.00118851 Jy ! Component: 550 - total flux cleaned = 0.00149567 Jy ! Component: 600 - total flux cleaned = 0.00179588 Jy ! Component: 650 - total flux cleaned = 0.00208994 Jy ! Component: 700 - total flux cleaned = 0.00234292 Jy ! Component: 750 - total flux cleaned = 0.00266241 Jy ! Component: 800 - total flux cleaned = 0.00301021 Jy ! Component: 850 - total flux cleaned = 0.00324881 Jy ! Component: 900 - total flux cleaned = 0.0034844 Jy ! Component: 950 - total flux cleaned = 0.00384899 Jy ! Component: 1000 - total flux cleaned = 0.00410992 Jy ! Component: 1050 - total flux cleaned = 0.00430258 Jy ! Component: 1100 - total flux cleaned = 0.00442943 Jy ! Component: 1150 - total flux cleaned = 0.0047098 Jy ! Component: 1200 - total flux cleaned = 0.00480144 Jy ! Component: 1250 - total flux cleaned = 0.00501354 Jy ! Component: 1300 - total flux cleaned = 0.00522244 Jy ! Component: 1350 - total flux cleaned = 0.00545709 Jy ! Component: 1400 - total flux cleaned = 0.00563052 Jy ! Component: 1450 - total flux cleaned = 0.00577378 Jy ! Component: 1500 - total flux cleaned = 0.00599978 Jy ! Component: 1550 - total flux cleaned = 0.00622287 Jy ! Component: 1600 - total flux cleaned = 0.00638847 Jy ! Component: 1650 - total flux cleaned = 0.00657949 Jy ! Component: 1700 - total flux cleaned = 0.00682231 Jy ! Component: 1750 - total flux cleaned = 0.00708839 Jy ! Component: 1800 - total flux cleaned = 0.00735154 Jy ! Component: 1850 - total flux cleaned = 0.00750796 Jy ! Component: 1900 - total flux cleaned = 0.00771402 Jy ! Component: 1950 - total flux cleaned = 0.00786618 Jy ! Component: 2000 - total flux cleaned = 0.00799199 Jy ! Total flux subtracted in 2048 components = 0.00819118 Jy ! Clean residual min=-0.001567 max=0.001847 Jy/beam ! Clean residual mean=0.000019 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.149713 Jy keep ! Adding 120 model components to the UV plane model. ! The established model now contains 170 components and 0.149713 Jy ![Exited script file: muppet] wmap "J1226-1328_S_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.018 x 7.924 at -3.039 degrees (North through East) ! Clean map min=-0.0032205 max=0.12902 Jy/beam ! Writing clean map to FITS file: J1226-1328_S_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.129019 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000508582 device "J1226-1328_S_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1226-1328_S_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.18258 1.18258 2.36515 4.7303 9.46061 18.9212 37.8424 75.6849 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.129 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.018 x 7.924 at -3.039 degrees (North through East) ! Clean map min=-0.0032205 max=0.12902 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1226-1328_S_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1226-1328_S_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1226-1328_S_2005_06_30_yyk_uvs.log closed on Sat Oct 8 17:20:48 2005