! Started logfile: J1126-3828_X_2005_06_30_yyk_uvs.log on Sat Oct 8 17:18:27 2005 obs J1126-3828_X_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J1126-3828_X_2005_06_30_yyk_uve.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1126-3828 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1460 lines of history. ! ! Reading 2592 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1126-3828_X_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.173991 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5689 mas, bmaj=1.723 mas, bpa=9.078 degrees ! Estimated noise=1.7733 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.104769 Jy ! Component: 100 - total flux cleaned = 0.130344 Jy ! Total flux subtracted in 100 components = 0.130344 Jy ! Clean residual min=-0.019719 max=0.029061 Jy/beam ! Clean residual mean=-0.000041 rms=0.005718 Jy/beam ! Combined flux in latest and established models = 0.130344 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.130344 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.108753Jy sigma=1.664340 ! Fit after self-cal, rms=0.107893Jy sigma=1.649719 ! Inverting map and beam ! Estimated beam: bmin=0.5689 mas, bmaj=1.723 mas, bpa=9.078 degrees ! Estimated noise=1.7733 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8129 mas, bmaj=2.174 mas, bpa=7.603 degrees ! Estimated noise=0.9943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0300396 Jy ! Component: 100 - total flux cleaned = 0.0402307 Jy ! Component: 150 - total flux cleaned = 0.0436786 Jy ! Component: 200 - total flux cleaned = 0.0440288 Jy ! Total flux subtracted in 200 components = 0.0440288 Jy ! Clean residual min=-0.019148 max=0.042682 Jy/beam ! Clean residual mean=-0.000025 rms=0.008163 Jy/beam ! Combined flux in latest and established models = 0.174373 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 22 components and 0.174373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105819Jy sigma=1.562616 ! Fit after self-cal, rms=0.105696Jy sigma=1.561094 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8129 x 2.174 at 7.603 degrees (North through East) ! Clean map min=-0.018676 max=0.13802 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.105696Jy sigma=1.561094 ! Fit after self-cal, rms=0.105696Jy sigma=1.561094 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105696Jy sigma=1.561094 ! Fit after self-cal, rms=0.105661Jy sigma=1.561070 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8129 mas, bmaj=2.174 mas, bpa=7.603 degrees ! Estimated noise=0.9943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.6, 0.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0449903 Jy ! Component: 100 - total flux cleaned = 0.0591629 Jy ! Component: 150 - total flux cleaned = 0.0655563 Jy ! Component: 200 - total flux cleaned = 0.0674917 Jy ! Total flux subtracted in 200 components = 0.0674917 Jy ! Clean residual min=-0.011977 max=0.018969 Jy/beam ! Clean residual mean=-0.000012 rms=0.004508 Jy/beam ! Combined flux in latest and established models = 0.241864 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 50 components and 0.241864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093922Jy sigma=1.339407 ! Fit after self-cal, rms=0.093140Jy sigma=1.324898 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093140Jy sigma=1.324898 ! Fit after self-cal, rms=0.077699Jy sigma=1.130919 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00879003 Jy ! Component: 100 - total flux cleaned = 0.0139358 Jy ! Component: 150 - total flux cleaned = 0.0171846 Jy ! Component: 200 - total flux cleaned = 0.0192428 Jy ! Total flux subtracted in 200 components = 0.0192428 Jy ! Clean residual min=-0.008320 max=0.011272 Jy/beam ! Clean residual mean=-0.000017 rms=0.003289 Jy/beam ! Combined flux in latest and established models = 0.261107 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 66 components and 0.261107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077351Jy sigma=1.117556 ! Fit after self-cal, rms=0.076414Jy sigma=1.106009 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8129 x 2.174 at 7.603 degrees (North through East) ! Clean map min=-0.0076692 max=0.14583 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076414Jy sigma=1.106009 ! Fit after self-cal, rms=0.075258Jy sigma=1.096736 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075258Jy sigma=1.096736 ! Fit after self-cal, rms=0.075199Jy sigma=1.095848 ! Inverting map and beam ! Estimated beam: bmin=0.8056 mas, bmaj=2.16 mas, bpa=7.336 degrees ! Estimated noise=0.970205 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000668809 Jy ! Component: 100 - total flux cleaned = -0.000535012 Jy ! Component: 150 - total flux cleaned = -0.000417511 Jy ! Component: 200 - total flux cleaned = -0.000311582 Jy ! Total flux subtracted in 200 components = -0.000311582 Jy ! Clean residual min=-0.007254 max=0.008885 Jy/beam ! Clean residual mean=-0.000011 rms=0.002844 Jy/beam ! Combined flux in latest and established models = 0.260796 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 75 components and 0.260796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074974Jy sigma=1.094002 ! Fit after self-cal, rms=0.074970Jy sigma=1.093810 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074970Jy sigma=1.093810 ! Fit after self-cal, rms=0.073802Jy sigma=1.080058 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073802Jy sigma=1.080058 ! Fit after self-cal, rms=0.073811Jy sigma=1.079988 ! Inverting map and beam ! Estimated beam: bmin=0.7977 mas, bmaj=2.146 mas, bpa=7.08 degrees ! Estimated noise=0.947739 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00290714 Jy ! Component: 100 - total flux cleaned = -0.00322261 Jy ! Component: 150 - total flux cleaned = -0.0032269 Jy ! Component: 200 - total flux cleaned = -0.00318441 Jy ! Total flux subtracted in 200 components = -0.00318441 Jy ! Clean residual min=-0.006435 max=0.007971 Jy/beam ! Clean residual mean=-0.000012 rms=0.002532 Jy/beam ! Combined flux in latest and established models = 0.257611 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 87 components and 0.257611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073524Jy sigma=1.077707 ! Fit after self-cal, rms=0.073533Jy sigma=1.077670 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.794 mas, bmaj=9.794 mas, bpa=11.33 degrees ! Estimated noise=1.25045 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000634275 Jy ! Component: 100 - total flux cleaned = 0.000800575 Jy ! Component: 150 - total flux cleaned = 0.000801516 Jy ! Component: 200 - total flux cleaned = 0.000800204 Jy ! Total flux subtracted in 200 components = 0.000800204 Jy ! Clean residual min=-0.008578 max=0.010277 Jy/beam ! Clean residual mean=-0.000024 rms=0.004240 Jy/beam ! Combined flux in latest and established models = 0.258411 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 89 components and 0.258411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073568Jy sigma=1.077623 ! Fit after self-cal, rms=0.073572Jy sigma=1.077541 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5659 mas, bmaj=1.72 mas, bpa=8.862 degrees ! Estimated noise=1.69728 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.107774 Jy ! Component: 100 - total flux cleaned = 0.142395 Jy ! Component: 150 - total flux cleaned = 0.16368 Jy ! Component: 200 - total flux cleaned = 0.180588 Jy ! Total flux subtracted in 200 components = 0.180588 Jy ! Clean residual min=-0.011549 max=0.012213 Jy/beam ! Clean residual mean=-0.000031 rms=0.003430 Jy/beam ! Combined flux in latest and established models = 0.180588 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.180588 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7977 mas, bmaj=2.146 mas, bpa=7.08 degrees ! Estimated noise=0.947739 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0287636 Jy ! Component: 100 - total flux cleaned = 0.0461043 Jy ! Component: 150 - total flux cleaned = 0.0569552 Jy ! Component: 200 - total flux cleaned = 0.063872 Jy ! Total flux subtracted in 200 components = 0.063872 Jy ! Clean residual min=-0.007263 max=0.008709 Jy/beam ! Clean residual mean=-0.000018 rms=0.002767 Jy/beam ! Combined flux in latest and established models = 0.24446 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 86 components and 0.24446 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.794 mas, bmaj=9.794 mas, bpa=11.33 degrees ! Estimated noise=1.25045 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00714358 Jy ! Component: 100 - total flux cleaned = 0.0106531 Jy ! Component: 150 - total flux cleaned = 0.0124464 Jy ! Component: 200 - total flux cleaned = 0.0129632 Jy ! Total flux subtracted in 200 components = 0.0129632 Jy ! Clean residual min=-0.008835 max=0.010294 Jy/beam ! Clean residual mean=-0.000024 rms=0.004253 Jy/beam ! Combined flux in latest and established models = 0.257423 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 97 components and 0.257423 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7977 mas, bmaj=2.146 mas, bpa=7.08 degrees ! Estimated noise=0.947739 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000394555 Jy ! Component: 100 - total flux cleaned = -0.000620257 Jy ! Component: 150 - total flux cleaned = -0.000795955 Jy ! Component: 200 - total flux cleaned = -0.000747631 Jy ! Total flux subtracted in 200 components = -0.000747631 Jy ! Clean residual min=-0.006744 max=0.007877 Jy/beam ! Clean residual mean=-0.000013 rms=0.002536 Jy/beam ! Combined flux in latest and established models = 0.256676 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 110 components and 0.256676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073479Jy sigma=1.076582 ! Fit after self-cal, rms=0.073438Jy sigma=1.076336 wmodel J1126-3828_X_2005_06_30_yyk\_map.mod ! Writing 110 model components to file: J1126-3828_X_2005_06_30_yyk_map.mod wobs J1126-3828_X_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J1126-3828_X_2005_06_30_yyk_uvs.fits wwins J1126-3828_X_2005_06_30_yyk\_map.win ! wwins: Wrote 2 windows to J1126-3828_X_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00339062 Jy ! Component: 100 - total flux cleaned = 0.00563578 Jy ! Component: 150 - total flux cleaned = 0.00782602 Jy ! Component: 200 - total flux cleaned = 0.00975504 Jy ! Component: 250 - total flux cleaned = 0.011061 Jy ! Component: 300 - total flux cleaned = 0.0119183 Jy ! Component: 350 - total flux cleaned = 0.0120973 Jy ! Component: 400 - total flux cleaned = 0.0123518 Jy ! Component: 450 - total flux cleaned = 0.0123516 Jy ! Component: 500 - total flux cleaned = 0.0125099 Jy ! Component: 550 - total flux cleaned = 0.0125847 Jy ! Component: 600 - total flux cleaned = 0.0124438 Jy ! Component: 650 - total flux cleaned = 0.0124471 Jy ! Component: 700 - total flux cleaned = 0.0127104 Jy ! Component: 750 - total flux cleaned = 0.012838 Jy ! Component: 800 - total flux cleaned = 0.0131457 Jy ! Component: 850 - total flux cleaned = 0.0134414 Jy ! Component: 900 - total flux cleaned = 0.0137833 Jy ! Component: 950 - total flux cleaned = 0.014222 Jy ! Component: 1000 - total flux cleaned = 0.0144351 Jy ! Component: 1050 - total flux cleaned = 0.0148491 Jy ! Component: 1100 - total flux cleaned = 0.0152997 Jy ! Component: 1150 - total flux cleaned = 0.0154931 Jy ! Component: 1200 - total flux cleaned = 0.0156355 Jy ! Component: 1250 - total flux cleaned = 0.0159584 Jy ! Component: 1300 - total flux cleaned = 0.0164523 Jy ! Component: 1350 - total flux cleaned = 0.0168484 Jy ! Component: 1400 - total flux cleaned = 0.0174084 Jy ! Component: 1450 - total flux cleaned = 0.0178313 Jy ! Component: 1500 - total flux cleaned = 0.0182878 Jy ! Component: 1550 - total flux cleaned = 0.0185324 Jy ! Component: 1600 - total flux cleaned = 0.0188931 Jy ! Component: 1650 - total flux cleaned = 0.0192079 Jy ! Component: 1700 - total flux cleaned = 0.0194796 Jy ! Component: 1750 - total flux cleaned = 0.0198227 Jy ! Component: 1800 - total flux cleaned = 0.0201611 Jy ! Component: 1850 - total flux cleaned = 0.0205326 Jy ! Component: 1900 - total flux cleaned = 0.0209719 Jy ! Component: 1950 - total flux cleaned = 0.0212971 Jy ! Component: 2000 - total flux cleaned = 0.0217618 Jy ! Total flux subtracted in 2048 components = 0.0219742 Jy ! Clean residual min=-0.002217 max=0.001976 Jy/beam ! Clean residual mean=0.000029 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.27865 Jy keep ! Adding 140 model components to the UV plane model. ! The established model now contains 250 components and 0.27865 Jy ![Exited script file: muppet] wmap "J1126-3828_X_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7977 x 2.146 at 7.08 degrees (North through East) ! Clean map min=-0.0033166 max=0.14026 Jy/beam ! Writing clean map to FITS file: J1126-3828_X_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.140261 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000748135 device "J1126-3828_X_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1126-3828_X_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.60016 1.60016 3.20033 6.40066 12.8013 25.6026 51.2053 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.14 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7977 x 2.146 at 7.08 degrees (North through East) ! Clean map min=-0.0033166 max=0.14026 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1126-3828_X_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1126-3828_X_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1126-3828_X_2005_06_30_yyk_uvs.log closed on Sat Oct 8 17:18:32 2005