! Started logfile: J0958-3612_S_2005_06_01_yyk_uvs.log on Sat Oct 8 17:14:25 2005 obs J0958-3612_S_2005_06_01_yyk_uve.fits ! Reading UV FITS file: J0958-3612_S_2005_06_01_yyk_uve.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.549383 visibilities/baseline/integration-bin. ! Found source: J0958-3612 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1802 lines of history. ! ! Reading 1780 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0958-3612_S_2005_06_01_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.16705 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.475 mas, bmaj=7.118 mas, bpa=2.32 degrees ! Estimated noise=3.82202 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -0.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0584708 Jy ! Component: 100 - total flux cleaned = 0.0800258 Jy ! Total flux subtracted in 100 components = 0.0800258 Jy ! Clean residual min=-0.017157 max=0.020854 Jy/beam ! Clean residual mean=0.000193 rms=0.005825 Jy/beam ! Combined flux in latest and established models = 0.0800258 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0800258 Jy ! ! Correcting IF 1. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.139119Jy sigma=1.603941 ! Fit after self-cal, rms=0.130654Jy sigma=1.449704 ! Inverting map and beam ! Estimated beam: bmin=2.475 mas, bmaj=7.118 mas, bpa=2.32 degrees ! Estimated noise=3.82202 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.862 mas, bmaj=15.44 mas, bpa=-3.126 degrees ! Estimated noise=1.48734 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.049547 Jy ! Component: 100 - total flux cleaned = 0.0634947 Jy ! Component: 150 - total flux cleaned = 0.0645437 Jy ! Component: 200 - total flux cleaned = 0.0652904 Jy ! Total flux subtracted in 200 components = 0.0652904 Jy ! Clean residual min=-0.012613 max=0.031636 Jy/beam ! Clean residual mean=0.000967 rms=0.006051 Jy/beam ! Combined flux in latest and established models = 0.145316 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 38 components and 0.145316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120855Jy sigma=1.250753 ! Fit after self-cal, rms=0.120852Jy sigma=1.249989 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.862 x 15.44 at -3.126 degrees (North through East) ! Clean map min=-0.012309 max=0.10038 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.120852Jy sigma=1.249989 ! Fit after self-cal, rms=0.120852Jy sigma=1.249989 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120852Jy sigma=1.249989 ! Fit after self-cal, rms=0.120845Jy sigma=1.249918 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.862 mas, bmaj=15.44 mas, bpa=-3.126 degrees ! Estimated noise=1.48734 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10, 0). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0283438 Jy ! Component: 100 - total flux cleaned = 0.0347315 Jy ! Component: 150 - total flux cleaned = 0.0373799 Jy ! Component: 200 - total flux cleaned = 0.0393491 Jy ! Total flux subtracted in 200 components = 0.0393491 Jy ! Clean residual min=-0.006845 max=0.010929 Jy/beam ! Clean residual mean=0.000343 rms=0.002705 Jy/beam ! Combined flux in latest and established models = 0.184665 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 66 components and 0.184665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114894Jy sigma=1.163444 ! Fit after self-cal, rms=0.114127Jy sigma=1.152823 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114127Jy sigma=1.152823 ! Fit after self-cal, rms=0.105651Jy sigma=1.026166 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101849 Jy ! Component: 100 - total flux cleaned = 0.0154844 Jy ! Component: 150 - total flux cleaned = 0.0180687 Jy ! Component: 200 - total flux cleaned = 0.0184601 Jy ! Total flux subtracted in 200 components = 0.0184601 Jy ! Clean residual min=-0.005684 max=0.005087 Jy/beam ! Clean residual mean=0.000136 rms=0.001580 Jy/beam ! Combined flux in latest and established models = 0.203125 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 96 components and 0.203125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104445Jy sigma=1.012876 ! Fit after self-cal, rms=0.103837Jy sigma=1.004761 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.862 x 15.44 at -3.126 degrees (North through East) ! Clean map min=-0.0058284 max=0.10612 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103837Jy sigma=1.004761 ! Fit after self-cal, rms=0.106852Jy sigma=1.002277 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106852Jy sigma=1.002277 ! Fit after self-cal, rms=0.106797Jy sigma=1.001440 ! Inverting map and beam ! Estimated beam: bmin=4.846 mas, bmaj=15.65 mas, bpa=-3.879 degrees ! Estimated noise=1.49953 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423049 Jy ! Component: 100 - total flux cleaned = 0.00514038 Jy ! Component: 150 - total flux cleaned = 0.00528781 Jy ! Component: 200 - total flux cleaned = 0.00542466 Jy ! Total flux subtracted in 200 components = 0.00542466 Jy ! Clean residual min=-0.005795 max=0.004804 Jy/beam ! Clean residual mean=0.000235 rms=0.001484 Jy/beam ! Combined flux in latest and established models = 0.20855 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 115 components and 0.20855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106470Jy sigma=0.998845 ! Fit after self-cal, rms=0.106407Jy sigma=0.998301 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106407Jy sigma=0.998301 ! Fit after self-cal, rms=0.105583Jy sigma=1.001321 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105583Jy sigma=1.001321 ! Fit after self-cal, rms=0.105600Jy sigma=1.001134 ! Inverting map and beam ! Estimated beam: bmin=4.941 mas, bmaj=15.71 mas, bpa=-3.977 degrees ! Estimated noise=1.47325 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00165856 Jy ! Component: 100 - total flux cleaned = -0.0019957 Jy ! Component: 150 - total flux cleaned = -0.0022753 Jy ! Component: 200 - total flux cleaned = -0.00251612 Jy ! Total flux subtracted in 200 components = -0.00251612 Jy ! Clean residual min=-0.005161 max=0.003657 Jy/beam ! Clean residual mean=0.000226 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 0.206034 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 126 components and 0.206034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105521Jy sigma=0.999158 ! Fit after self-cal, rms=0.105471Jy sigma=0.999010 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.97 mas, bmaj=43.68 mas, bpa=12.11 degrees ! Estimated noise=1.59812 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000472227 Jy ! Component: 100 - total flux cleaned = 0.000511662 Jy ! Component: 150 - total flux cleaned = 0.000477803 Jy ! Component: 200 - total flux cleaned = 0.000478397 Jy ! Total flux subtracted in 200 components = 0.000478397 Jy ! Clean residual min=-0.003289 max=0.002887 Jy/beam ! Clean residual mean=0.000277 rms=0.001188 Jy/beam ! Combined flux in latest and established models = 0.206512 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 142 components and 0.206512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105430Jy sigma=0.998705 ! Fit after self-cal, rms=0.105419Jy sigma=0.998644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.496 mas, bmaj=7.129 mas, bpa=1.696 degrees ! Estimated noise=3.8156 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0790045 Jy ! Component: 100 - total flux cleaned = 0.1168 Jy ! Component: 150 - total flux cleaned = 0.141618 Jy ! Component: 200 - total flux cleaned = 0.156956 Jy ! Total flux subtracted in 200 components = 0.156956 Jy ! Clean residual min=-0.017459 max=0.013329 Jy/beam ! Clean residual mean=0.000166 rms=0.004078 Jy/beam ! Combined flux in latest and established models = 0.156956 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 52 model components to the UV plane model. ! The established model now contains 52 components and 0.156956 Jy ! Inverting map and beam ! Estimated beam: bmin=4.941 mas, bmaj=15.71 mas, bpa=-3.977 degrees ! Estimated noise=1.47325 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0218049 Jy ! Component: 100 - total flux cleaned = 0.0338776 Jy ! Component: 150 - total flux cleaned = 0.0411543 Jy ! Component: 200 - total flux cleaned = 0.045567 Jy ! Total flux subtracted in 200 components = 0.045567 Jy ! Clean residual min=-0.005922 max=0.004427 Jy/beam ! Clean residual mean=0.000254 rms=0.001508 Jy/beam ! Combined flux in latest and established models = 0.202523 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 91 components and 0.202523 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.97 mas, bmaj=43.68 mas, bpa=12.11 degrees ! Estimated noise=1.59812 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00297963 Jy ! Component: 100 - total flux cleaned = 0.00374039 Jy ! Component: 150 - total flux cleaned = 0.00434296 Jy ! Component: 200 - total flux cleaned = 0.00446793 Jy ! Total flux subtracted in 200 components = 0.00446793 Jy ! Clean residual min=-0.003422 max=0.002927 Jy/beam ! Clean residual mean=0.000254 rms=0.001233 Jy/beam ! Combined flux in latest and established models = 0.206991 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 104 components and 0.206991 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.941 mas, bmaj=15.71 mas, bpa=-3.977 degrees ! Estimated noise=1.47325 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000713642 Jy ! Component: 100 - total flux cleaned = -0.000710338 Jy ! Component: 150 - total flux cleaned = -0.000779825 Jy ! Component: 200 - total flux cleaned = -0.000842167 Jy ! Total flux subtracted in 200 components = -0.000842167 Jy ! Clean residual min=-0.005305 max=0.003684 Jy/beam ! Clean residual mean=0.000215 rms=0.001256 Jy/beam ! Combined flux in latest and established models = 0.206149 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 115 components and 0.206149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105460Jy sigma=0.998764 ! Fit after self-cal, rms=0.105317Jy sigma=0.997667 wmodel J0958-3612_S_2005_06_01_yyk\_map.mod ! Writing 115 model components to file: J0958-3612_S_2005_06_01_yyk_map.mod wobs J0958-3612_S_2005_06_01_yyk\_uvs.fits ! Writing UV FITS file: J0958-3612_S_2005_06_01_yyk_uvs.fits wwins J0958-3612_S_2005_06_01_yyk\_map.win ! wwins: Wrote 2 windows to J0958-3612_S_2005_06_01_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00208157 Jy ! Component: 100 - total flux cleaned = -0.00202564 Jy ! Component: 150 - total flux cleaned = -0.00172878 Jy ! Component: 200 - total flux cleaned = -0.00178562 Jy ! Component: 250 - total flux cleaned = -0.00184134 Jy ! Component: 300 - total flux cleaned = -0.00173554 Jy ! Component: 350 - total flux cleaned = -0.00153294 Jy ! Component: 400 - total flux cleaned = -0.00109326 Jy ! Component: 450 - total flux cleaned = -0.000713085 Jy ! Component: 500 - total flux cleaned = -0.000296762 Jy ! Component: 550 - total flux cleaned = 0.000155045 Jy ! Component: 600 - total flux cleaned = 0.000464654 Jy ! Component: 650 - total flux cleaned = 0.000896745 Jy ! Component: 700 - total flux cleaned = 0.001193 Jy ! Component: 750 - total flux cleaned = 0.00160646 Jy ! Component: 800 - total flux cleaned = 0.00193049 Jy ! Component: 850 - total flux cleaned = 0.00224834 Jy ! Component: 900 - total flux cleaned = 0.0025218 Jy ! Component: 950 - total flux cleaned = 0.00282862 Jy ! Component: 1000 - total flux cleaned = 0.00316799 Jy ! Component: 1050 - total flux cleaned = 0.00346456 Jy ! Component: 1100 - total flux cleaned = 0.00375639 Jy ! Component: 1150 - total flux cleaned = 0.00400798 Jy ! Component: 1200 - total flux cleaned = 0.00425602 Jy ! Component: 1250 - total flux cleaned = 0.00450083 Jy ! Component: 1300 - total flux cleaned = 0.00477649 Jy ! Component: 1350 - total flux cleaned = 0.00494676 Jy ! Component: 1400 - total flux cleaned = 0.00524917 Jy ! Component: 1450 - total flux cleaned = 0.0054146 Jy ! Component: 1500 - total flux cleaned = 0.00561065 Jy ! Component: 1550 - total flux cleaned = 0.00580417 Jy ! Component: 1600 - total flux cleaned = 0.00596339 Jy ! Component: 1650 - total flux cleaned = 0.00621543 Jy ! Component: 1700 - total flux cleaned = 0.00637082 Jy ! Component: 1750 - total flux cleaned = 0.00655542 Jy ! Component: 1800 - total flux cleaned = 0.00673776 Jy ! Component: 1850 - total flux cleaned = 0.00697778 Jy ! Component: 1900 - total flux cleaned = 0.00718509 Jy ! Component: 1950 - total flux cleaned = 0.00736066 Jy ! Component: 2000 - total flux cleaned = 0.00756296 Jy ! Total flux subtracted in 2048 components = 0.00770598 Jy ! Clean residual min=-0.001819 max=0.001865 Jy/beam ! Clean residual mean=0.000061 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.213855 Jy keep ! Adding 77 model components to the UV plane model. ! The established model now contains 192 components and 0.213855 Jy ![Exited script file: muppet] wmap "J0958-3612_S_2005_06_01_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.941 x 15.71 at -3.977 degrees (North through East) ! Clean map min=-0.003878 max=0.094342 Jy/beam ! Writing clean map to FITS file: J0958-3612_S_2005_06_01_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0943423 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000572043 device "J0958-3612_S_2005_06_01_yyk\_map.eps/VPS" ! Attempting to open device: 'J0958-3612_S_2005_06_01_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.81905 1.81905 3.63809 7.27618 14.5524 29.1047 58.2094 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.094 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.941 x 15.71 at -3.977 degrees (North through East) ! Clean map min=-0.003878 max=0.094342 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0958-3612_S_2005_06_01_yyk\_map.gif/gif" ! Attempting to open device: 'J0958-3612_S_2005_06_01_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0958-3612_S_2005_06_01_yyk_uvs.log closed on Sat Oct 8 17:14:29 2005