! Started logfile: J0945-0153_S_2005_06_30_yyk_uvs.log on Sat Oct 8 17:13:52 2005 obs J0945-0153_S_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J0945-0153_S_2005_06_30_yyk_uve.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0945-0153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1469 lines of history. ! ! Reading 3240 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0945-0153_S_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.214158 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.558 mas, bmaj=6.617 mas, bpa=-1.889 degrees ! Estimated noise=0.958772 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.171552 Jy ! Component: 100 - total flux cleaned = 0.207343 Jy ! Total flux subtracted in 100 components = 0.207343 Jy ! Clean residual min=-0.005395 max=0.009259 Jy/beam ! Clean residual mean=0.000006 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 0.207343 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.207343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065176Jy sigma=1.101277 ! Fit after self-cal, rms=0.065000Jy sigma=1.097556 ! Inverting map and beam ! Estimated beam: bmin=2.558 mas, bmaj=6.617 mas, bpa=-1.889 degrees ! Estimated noise=0.958772 mJy/beam. ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129909 Jy ! Component: 100 - total flux cleaned = 0.0194929 Jy ! Total flux subtracted in 100 components = 0.0194929 Jy ! Clean residual min=-0.003928 max=0.004479 Jy/beam ! Clean residual mean=-0.000023 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.226836 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.226836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062998Jy sigma=1.068704 ! Fit after self-cal, rms=0.062962Jy sigma=1.068127 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=7.886 mas, bpa=-3.802 degrees ! Estimated noise=0.66491 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105574 Jy ! Component: 100 - total flux cleaned = -0.000801973 Jy ! Component: 150 - total flux cleaned = -0.000495156 Jy ! Component: 200 - total flux cleaned = -0.000326035 Jy ! Total flux subtracted in 200 components = -0.000326035 Jy ! Clean residual min=-0.003239 max=0.004053 Jy/beam ! Clean residual mean=-0.000144 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.22651 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.22651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062927Jy sigma=1.065654 ! Fit after self-cal, rms=0.062912Jy sigma=1.065408 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.092 x 7.886 at -3.802 degrees (North through East) ! Clean map min=-0.0030802 max=0.19534 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00816 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.97 KP 0.96 ! LA 1.07 MK 0.96 NL 0.95 OV 0.98 ! PT 1.08 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.987351 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.03 KP 1.02 ! LA 1.03 MK 0.96 NL 0.98 OV 1.02 ! PT 1.07 SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.984618 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.93 HN 1.02 KP 1.02 ! LA 0.97 MK 1.09 NL 1.03 OV 0.99 ! PT 1.16 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.062912Jy sigma=1.065408 ! Fit after self-cal, rms=0.061626Jy sigma=1.041068 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061626Jy sigma=1.041068 ! Fit after self-cal, rms=0.061622Jy sigma=1.040912 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=7.778 mas, bpa=-3.547 degrees ! Estimated noise=0.669411 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00357365 Jy ! Component: 100 - total flux cleaned = 0.0049306 Jy ! Component: 150 - total flux cleaned = 0.00524327 Jy ! Component: 200 - total flux cleaned = 0.00549835 Jy ! Total flux subtracted in 200 components = 0.00549835 Jy ! Clean residual min=-0.002421 max=0.002881 Jy/beam ! Clean residual mean=-0.000038 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.232008 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.232008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061364Jy sigma=1.037822 ! Fit after self-cal, rms=0.061356Jy sigma=1.037662 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061356Jy sigma=1.037662 ! Fit after self-cal, rms=0.059653Jy sigma=1.003860 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000818607 Jy ! Component: 100 - total flux cleaned = 0.000923801 Jy ! Component: 150 - total flux cleaned = 0.000977818 Jy ! Component: 200 - total flux cleaned = 0.000993167 Jy ! Total flux subtracted in 200 components = 0.000993167 Jy ! Clean residual min=-0.002437 max=0.002805 Jy/beam ! Clean residual mean=-0.000039 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.233001 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.233001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059624Jy sigma=1.003594 ! Fit after self-cal, rms=0.059564Jy sigma=1.001850 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.069 x 7.778 at -3.547 degrees (North through East) ! Clean map min=-0.0022945 max=0.19634 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059564Jy sigma=1.001850 ! Fit after self-cal, rms=0.058279Jy sigma=0.976354 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058279Jy sigma=0.976354 ! Fit after self-cal, rms=0.058285Jy sigma=0.976142 ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=7.747 mas, bpa=-3.42 degrees ! Estimated noise=0.675134 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247122 Jy ! Component: 100 - total flux cleaned = 0.0034236 Jy ! Component: 150 - total flux cleaned = 0.00379312 Jy ! Component: 200 - total flux cleaned = 0.00384193 Jy ! Total flux subtracted in 200 components = 0.00384193 Jy ! Clean residual min=-0.001953 max=0.002326 Jy/beam ! Clean residual mean=-0.000021 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.236843 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 63 components and 0.236843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058177Jy sigma=0.974749 ! Fit after self-cal, rms=0.058181Jy sigma=0.974707 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058181Jy sigma=0.974707 ! Fit after self-cal, rms=0.056239Jy sigma=0.939700 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056239Jy sigma=0.939700 ! Fit after self-cal, rms=0.056242Jy sigma=0.939625 ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=7.777 mas, bpa=-3.387 degrees ! Estimated noise=0.675235 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -1.08773e-05 Jy ! Component: 100 - total flux cleaned = -1.03839e-05 Jy ! Component: 150 - total flux cleaned = -1.03341e-05 Jy ! Component: 200 - total flux cleaned = -2.17198e-05 Jy ! Total flux subtracted in 200 components = -2.17198e-05 Jy ! Clean residual min=-0.001957 max=0.002121 Jy/beam ! Clean residual mean=-0.000024 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.236822 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 0.236822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056241Jy sigma=0.939508 ! Fit after self-cal, rms=0.056243Jy sigma=0.939497 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.62 mas, bmaj=13.12 mas, bpa=3.994 degrees ! Estimated noise=0.874185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000239124 Jy ! Component: 100 - total flux cleaned = -0.000272938 Jy ! Component: 150 - total flux cleaned = -0.000302806 Jy ! Component: 200 - total flux cleaned = -0.000316786 Jy ! Total flux subtracted in 200 components = -0.000316786 Jy ! Clean residual min=-0.002473 max=0.002616 Jy/beam ! Clean residual mean=-0.000052 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.236505 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 76 components and 0.236505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056244Jy sigma=0.939503 ! Fit after self-cal, rms=0.056245Jy sigma=0.939475 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.553 mas, bmaj=6.601 mas, bpa=-1.817 degrees ! Estimated noise=0.956 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.171616 Jy ! Component: 100 - total flux cleaned = 0.208044 Jy ! Component: 150 - total flux cleaned = 0.221735 Jy ! Component: 200 - total flux cleaned = 0.228872 Jy ! Total flux subtracted in 200 components = 0.228872 Jy ! Clean residual min=-0.003473 max=0.003652 Jy/beam ! Clean residual mean=0.000011 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.228872 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.228872 Jy ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=7.777 mas, bpa=-3.387 degrees ! Estimated noise=0.675235 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00442874 Jy ! Component: 100 - total flux cleaned = 0.00642384 Jy ! Component: 150 - total flux cleaned = 0.00676885 Jy ! Component: 200 - total flux cleaned = 0.00705207 Jy ! Total flux subtracted in 200 components = 0.00705207 Jy ! Clean residual min=-0.001943 max=0.002163 Jy/beam ! Clean residual mean=-0.000021 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.235924 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 56 components and 0.235924 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.62 mas, bmaj=13.12 mas, bpa=3.994 degrees ! Estimated noise=0.874185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00038917 Jy ! Component: 100 - total flux cleaned = 0.000375011 Jy ! Component: 150 - total flux cleaned = 0.000362352 Jy ! Component: 200 - total flux cleaned = 0.000351341 Jy ! Total flux subtracted in 200 components = 0.000351341 Jy ! Clean residual min=-0.002497 max=0.002651 Jy/beam ! Clean residual mean=-0.000050 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.236275 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 67 components and 0.236275 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=7.777 mas, bpa=-3.387 degrees ! Estimated noise=0.675235 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -3.13179e-05 Jy ! Component: 100 - total flux cleaned = 0.000120888 Jy ! Component: 150 - total flux cleaned = 0.000267737 Jy ! Component: 200 - total flux cleaned = 0.000340954 Jy ! Total flux subtracted in 200 components = 0.000340954 Jy ! Clean residual min=-0.001930 max=0.002109 Jy/beam ! Clean residual mean=-0.000024 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.236616 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 75 components and 0.236616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056262Jy sigma=0.939739 ! Fit after self-cal, rms=0.056260Jy sigma=0.939729 wmodel J0945-0153_S_2005_06_30_yyk\_map.mod ! Writing 75 model components to file: J0945-0153_S_2005_06_30_yyk_map.mod wobs J0945-0153_S_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J0945-0153_S_2005_06_30_yyk_uvs.fits wwins J0945-0153_S_2005_06_30_yyk\_map.win ! wwins: Wrote 1 windows to J0945-0153_S_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000382779 Jy ! Component: 100 - total flux cleaned = 0.000418152 Jy ! Component: 150 - total flux cleaned = 0.000580192 Jy ! Component: 200 - total flux cleaned = 0.000705456 Jy ! Component: 250 - total flux cleaned = 0.000887359 Jy ! Component: 300 - total flux cleaned = 0.00100449 Jy ! Component: 350 - total flux cleaned = 0.00111823 Jy ! Component: 400 - total flux cleaned = 0.00128406 Jy ! Component: 450 - total flux cleaned = 0.0014995 Jy ! Component: 500 - total flux cleaned = 0.00165728 Jy ! Component: 550 - total flux cleaned = 0.00183648 Jy ! Component: 600 - total flux cleaned = 0.00211091 Jy ! Component: 650 - total flux cleaned = 0.00235504 Jy ! Component: 700 - total flux cleaned = 0.00249879 Jy ! Component: 750 - total flux cleaned = 0.00273392 Jy ! Component: 800 - total flux cleaned = 0.00287126 Jy ! Component: 850 - total flux cleaned = 0.00293875 Jy ! Component: 900 - total flux cleaned = 0.00305017 Jy ! Component: 950 - total flux cleaned = 0.00318035 Jy ! Component: 1000 - total flux cleaned = 0.0032442 Jy ! Component: 1050 - total flux cleaned = 0.00324451 Jy ! Component: 1100 - total flux cleaned = 0.00334873 Jy ! Component: 1150 - total flux cleaned = 0.00334895 Jy ! Component: 1200 - total flux cleaned = 0.00342998 Jy ! Component: 1250 - total flux cleaned = 0.00356937 Jy ! Component: 1300 - total flux cleaned = 0.00358954 Jy ! Component: 1350 - total flux cleaned = 0.00372535 Jy ! Component: 1400 - total flux cleaned = 0.00378283 Jy ! Component: 1450 - total flux cleaned = 0.00383937 Jy ! Component: 1500 - total flux cleaned = 0.00391351 Jy ! Component: 1550 - total flux cleaned = 0.00393156 Jy ! Component: 1600 - total flux cleaned = 0.00391333 Jy ! Component: 1650 - total flux cleaned = 0.00391385 Jy ! Component: 1700 - total flux cleaned = 0.00402063 Jy ! Component: 1750 - total flux cleaned = 0.00409118 Jy ! Component: 1800 - total flux cleaned = 0.00414322 Jy ! Component: 1850 - total flux cleaned = 0.00417771 Jy ! Component: 1900 - total flux cleaned = 0.0042118 Jy ! Component: 1950 - total flux cleaned = 0.00424557 Jy ! Component: 2000 - total flux cleaned = 0.00426237 Jy ! Total flux subtracted in 2048 components = 0.00429566 Jy ! Clean residual min=-0.001009 max=0.001139 Jy/beam ! Clean residual mean=0.000001 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.240912 Jy keep ! Adding 149 model components to the UV plane model. ! The established model now contains 224 components and 0.240912 Jy ![Exited script file: muppet] wmap "J0945-0153_S_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.067 x 7.777 at -3.387 degrees (North through East) ! Clean map min=-0.0017537 max=0.19884 Jy/beam ! Writing clean map to FITS file: J0945-0153_S_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.198838 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000338129 device "J0945-0153_S_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0945-0153_S_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.510158 0.510158 1.02032 2.04063 4.08126 8.16253 16.3251 32.6501 65.3002 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.198 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.067 x 7.777 at -3.387 degrees (North through East) ! Clean map min=-0.0017537 max=0.19884 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0945-0153_S_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0945-0153_S_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0945-0153_S_2005_06_30_yyk_uvs.log closed on Sat Oct 8 17:13:57 2005