! Started logfile: J0942-0759_S_2005_05_12_yyk_uvs.log on Sat Oct 8 17:13:44 2005 obs J0942-0759_S_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J0942-0759_S_2005_05_12_yyk_uve.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.735185 visibilities/baseline/integration-bin. ! Found source: J0942-0759 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1442 lines of history. ! ! Reading 1588 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0942-0759_S_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.209966 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.86 mas, bmaj=11.39 mas, bpa=-14.43 degrees ! Estimated noise=1.19403 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.155222 Jy ! Component: 100 - total flux cleaned = 0.180758 Jy ! Total flux subtracted in 100 components = 0.180758 Jy ! Clean residual min=-0.009326 max=0.013919 Jy/beam ! Clean residual mean=-0.000121 rms=0.003054 Jy/beam ! Combined flux in latest and established models = 0.180758 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.180758 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.093531Jy sigma=1.688906 ! Fit after self-cal, rms=0.070151Jy sigma=1.242347 ! Inverting map and beam ! Estimated beam: bmin=2.86 mas, bmaj=11.39 mas, bpa=-14.43 degrees ! Estimated noise=1.19403 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.66 mas, bmaj=11.73 mas, bpa=-13.59 degrees ! Estimated noise=0.916033 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183943 Jy ! Component: 100 - total flux cleaned = 0.0261206 Jy ! Component: 150 - total flux cleaned = 0.0300322 Jy ! Component: 200 - total flux cleaned = 0.0308127 Jy ! Total flux subtracted in 200 components = 0.0308127 Jy ! Clean residual min=-0.005460 max=0.004847 Jy/beam ! Clean residual mean=0.000048 rms=0.001557 Jy/beam ! Combined flux in latest and established models = 0.21157 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 51 model components to the UV plane model. ! The established model now contains 65 components and 0.21157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065074Jy sigma=1.165115 ! Fit after self-cal, rms=0.065064Jy sigma=1.165039 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.66 x 11.73 at -13.59 degrees (North through East) ! Clean map min=-0.0052835 max=0.18917 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.04245 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.95 HN 0.95 KP 0.95 ! LA 0.99 MK 0.85 NL 0.92 OV 0.97 ! PT 1.06 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01375 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.06 HN 1.06 KP 1.02 ! LA 0.94 MK 0.94 NL 0.96 OV 0.99 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.96285 ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.20 HN 1.00 KP 0.99 ! LA 0.89 MK 1.08 NL 1.01 OV 1.01 ! PT 1.09 SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.065064Jy sigma=1.165039 ! Fit after self-cal, rms=0.063237Jy sigma=1.123316 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063237Jy sigma=1.123316 ! Fit after self-cal, rms=0.063234Jy sigma=1.123280 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.601 mas, bmaj=11.89 mas, bpa=-13.96 degrees ! Estimated noise=0.922899 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00361696 Jy ! Component: 100 - total flux cleaned = 0.00388479 Jy ! Component: 150 - total flux cleaned = 0.00372632 Jy ! Component: 200 - total flux cleaned = 0.00358963 Jy ! Total flux subtracted in 200 components = 0.00358963 Jy ! Clean residual min=-0.004165 max=0.003576 Jy/beam ! Clean residual mean=0.000026 rms=0.001113 Jy/beam ! Combined flux in latest and established models = 0.21516 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 87 components and 0.21516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062948Jy sigma=1.120172 ! Fit after self-cal, rms=0.062944Jy sigma=1.120138 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062944Jy sigma=1.120138 ! Fit after self-cal, rms=0.059181Jy sigma=1.044787 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105516 Jy ! Component: 100 - total flux cleaned = 0.00108722 Jy ! Component: 150 - total flux cleaned = 0.00104121 Jy ! Component: 200 - total flux cleaned = 0.000979108 Jy ! Total flux subtracted in 200 components = 0.000979108 Jy ! Clean residual min=-0.004004 max=0.003680 Jy/beam ! Clean residual mean=0.000029 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.216139 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 100 components and 0.216139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059100Jy sigma=1.044211 ! Fit after self-cal, rms=0.059051Jy sigma=1.041669 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.601 x 11.89 at -13.96 degrees (North through East) ! Clean map min=-0.0039541 max=0.19223 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059051Jy sigma=1.041669 ! Fit after self-cal, rms=0.057577Jy sigma=1.001478 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057577Jy sigma=1.001478 ! Fit after self-cal, rms=0.057610Jy sigma=1.001214 ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=12.01 mas, bpa=-14.15 degrees ! Estimated noise=0.928551 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239443 Jy ! Component: 100 - total flux cleaned = 0.00235516 Jy ! Component: 150 - total flux cleaned = 0.00228881 Jy ! Component: 200 - total flux cleaned = 0.00231618 Jy ! Total flux subtracted in 200 components = 0.00231618 Jy ! Clean residual min=-0.004028 max=0.004062 Jy/beam ! Clean residual mean=0.000031 rms=0.001122 Jy/beam ! Combined flux in latest and established models = 0.218455 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 112 components and 0.218455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057463Jy sigma=0.999172 ! Fit after self-cal, rms=0.057481Jy sigma=0.999121 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057481Jy sigma=0.999121 ! Fit after self-cal, rms=0.057309Jy sigma=0.984445 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057309Jy sigma=0.984445 ! Fit after self-cal, rms=0.057318Jy sigma=0.984417 ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=12.08 mas, bpa=-14.28 degrees ! Estimated noise=0.932624 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175917 Jy ! Component: 100 - total flux cleaned = 0.00172576 Jy ! Component: 150 - total flux cleaned = 0.00169907 Jy ! Component: 200 - total flux cleaned = 0.00165154 Jy ! Total flux subtracted in 200 components = 0.00165154 Jy ! Clean residual min=-0.003900 max=0.003942 Jy/beam ! Clean residual mean=0.000023 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.220107 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 119 components and 0.220107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057222Jy sigma=0.983218 ! Fit after self-cal, rms=0.057227Jy sigma=0.983202 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.994 mas, bmaj=14.69 mas, bpa=6.597 degrees ! Estimated noise=1.11423 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224716 Jy ! Component: 100 - total flux cleaned = 0.000185267 Jy ! Component: 150 - total flux cleaned = 0.000217437 Jy ! Component: 200 - total flux cleaned = 0.000275426 Jy ! Total flux subtracted in 200 components = 0.000275426 Jy ! Clean residual min=-0.004243 max=0.004625 Jy/beam ! Clean residual mean=0.000038 rms=0.001301 Jy/beam ! Combined flux in latest and established models = 0.220382 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 127 components and 0.220382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057228Jy sigma=0.983574 ! Fit after self-cal, rms=0.057230Jy sigma=0.983498 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=11.52 mas, bpa=-14.66 degrees ! Estimated noise=1.19326 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.165998 Jy ! Component: 100 - total flux cleaned = 0.19293 Jy ! Component: 150 - total flux cleaned = 0.204803 Jy ! Component: 200 - total flux cleaned = 0.211739 Jy ! Total flux subtracted in 200 components = 0.211739 Jy ! Clean residual min=-0.005222 max=0.005545 Jy/beam ! Clean residual mean=0.000070 rms=0.001466 Jy/beam ! Combined flux in latest and established models = 0.21174 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.21174 Jy ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=12.08 mas, bpa=-14.28 degrees ! Estimated noise=0.932624 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00485036 Jy ! Component: 100 - total flux cleaned = 0.00733308 Jy ! Component: 150 - total flux cleaned = 0.0082789 Jy ! Component: 200 - total flux cleaned = 0.00875773 Jy ! Total flux subtracted in 200 components = 0.00875773 Jy ! Clean residual min=-0.003791 max=0.004150 Jy/beam ! Clean residual mean=0.000020 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 0.220497 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 73 components and 0.220497 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.994 mas, bmaj=14.69 mas, bpa=6.597 degrees ! Estimated noise=1.11423 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000445937 Jy ! Component: 100 - total flux cleaned = 0.00044646 Jy ! Component: 150 - total flux cleaned = 0.000476016 Jy ! Component: 200 - total flux cleaned = 0.000532499 Jy ! Total flux subtracted in 200 components = 0.000532499 Jy ! Clean residual min=-0.004411 max=0.004573 Jy/beam ! Clean residual mean=0.000031 rms=0.001304 Jy/beam ! Combined flux in latest and established models = 0.22103 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 85 components and 0.22103 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=12.08 mas, bpa=-14.28 degrees ! Estimated noise=0.932624 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000196975 Jy ! Component: 100 - total flux cleaned = -0.000165552 Jy ! Component: 150 - total flux cleaned = -7.78227e-05 Jy ! Component: 200 - total flux cleaned = -5.25247e-05 Jy ! Total flux subtracted in 200 components = -5.25247e-05 Jy ! Clean residual min=-0.003878 max=0.003981 Jy/beam ! Clean residual mean=0.000017 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.220977 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 98 components and 0.220977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057235Jy sigma=0.983493 ! Fit after self-cal, rms=0.057233Jy sigma=0.983464 wmodel J0942-0759_S_2005_05_12_yyk\_map.mod ! Writing 98 model components to file: J0942-0759_S_2005_05_12_yyk_map.mod wobs J0942-0759_S_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J0942-0759_S_2005_05_12_yyk_uvs.fits wwins J0942-0759_S_2005_05_12_yyk\_map.win ! wwins: Wrote 1 windows to J0942-0759_S_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223587 Jy ! Component: 100 - total flux cleaned = 0.00053718 Jy ! Component: 150 - total flux cleaned = 0.00113259 Jy ! Component: 200 - total flux cleaned = 0.00186455 Jy ! Component: 250 - total flux cleaned = 0.00234513 Jy ! Component: 300 - total flux cleaned = 0.00270132 Jy ! Component: 350 - total flux cleaned = 0.00314137 Jy ! Component: 400 - total flux cleaned = 0.00361341 Jy ! Component: 450 - total flux cleaned = 0.0039774 Jy ! Component: 500 - total flux cleaned = 0.00433015 Jy ! Component: 550 - total flux cleaned = 0.00458715 Jy ! Component: 600 - total flux cleaned = 0.00487905 Jy ! Component: 650 - total flux cleaned = 0.00520434 Jy ! Component: 700 - total flux cleaned = 0.00556028 Jy ! Component: 750 - total flux cleaned = 0.00594628 Jy ! Component: 800 - total flux cleaned = 0.00632364 Jy ! Component: 850 - total flux cleaned = 0.00676546 Jy ! Component: 900 - total flux cleaned = 0.00701703 Jy ! Component: 950 - total flux cleaned = 0.00737025 Jy ! Component: 1000 - total flux cleaned = 0.00761251 Jy ! Component: 1050 - total flux cleaned = 0.00785054 Jy ! Component: 1100 - total flux cleaned = 0.00811745 Jy ! Component: 1150 - total flux cleaned = 0.00824825 Jy ! Component: 1200 - total flux cleaned = 0.00844136 Jy ! Component: 1250 - total flux cleaned = 0.00853668 Jy ! Component: 1300 - total flux cleaned = 0.00866154 Jy ! Component: 1350 - total flux cleaned = 0.00872345 Jy ! Component: 1400 - total flux cleaned = 0.00893437 Jy ! Component: 1450 - total flux cleaned = 0.00896403 Jy ! Component: 1500 - total flux cleaned = 0.00905176 Jy ! Component: 1550 - total flux cleaned = 0.00910949 Jy ! Component: 1600 - total flux cleaned = 0.00919392 Jy ! Component: 1650 - total flux cleaned = 0.009166 Jy ! Component: 1700 - total flux cleaned = 0.0091932 Jy ! Component: 1750 - total flux cleaned = 0.00930047 Jy ! Component: 1800 - total flux cleaned = 0.00935324 Jy ! Component: 1850 - total flux cleaned = 0.00940535 Jy ! Component: 1900 - total flux cleaned = 0.00945671 Jy ! Component: 1950 - total flux cleaned = 0.009482 Jy ! Component: 2000 - total flux cleaned = 0.00945637 Jy ! Total flux subtracted in 2048 components = 0.0094812 Jy ! Clean residual min=-0.001428 max=0.001498 Jy/beam ! Clean residual mean=0.000021 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.230458 Jy keep ! Adding 160 model components to the UV plane model. ! The established model now contains 258 components and 0.230458 Jy ![Exited script file: muppet] wmap "J0942-0759_S_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.516 x 12.08 at -14.28 degrees (North through East) ! Clean map min=-0.0036777 max=0.19432 Jy/beam ! Writing clean map to FITS file: J0942-0759_S_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.194317 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000545609 device "J0942-0759_S_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0942-0759_S_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.842348 0.842348 1.6847 3.36939 6.73879 13.4776 26.9552 53.9103 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.194 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.516 x 12.08 at -14.28 degrees (North through East) ! Clean map min=-0.0036777 max=0.19432 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0942-0759_S_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0942-0759_S_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0942-0759_S_2005_05_12_yyk_uvs.log closed on Sat Oct 8 17:13:48 2005