! Started logfile: J0907-2026_S_2005_05_12_yyk_uvs.log on Sat Oct 8 17:12:05 2005 obs J0907-2026_S_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J0907-2026_S_2005_05_12_yyk_uve.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.724074 visibilities/baseline/integration-bin. ! Found source: J0907-2026 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1442 lines of history. ! ! Reading 1564 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0907-2026_S_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.231343 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.922 mas, bmaj=13 mas, bpa=-11.89 degrees ! Estimated noise=1.73034 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.172515 Jy ! Component: 100 - total flux cleaned = 0.213544 Jy ! Total flux subtracted in 100 components = 0.213544 Jy ! Clean residual min=-0.010655 max=0.015255 Jy/beam ! Clean residual mean=0.000108 rms=0.003319 Jy/beam ! Combined flux in latest and established models = 0.213544 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.213544 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.088061Jy sigma=1.237943 ! Fit after self-cal, rms=0.086599Jy sigma=1.223856 ! Inverting map and beam ! Estimated beam: bmin=2.922 mas, bmaj=13 mas, bpa=-11.89 degrees ! Estimated noise=1.73034 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.722 mas, bmaj=14.83 mas, bpa=-11.97 degrees ! Estimated noise=1.07295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225931 Jy ! Component: 100 - total flux cleaned = 0.0310565 Jy ! Component: 150 - total flux cleaned = 0.0350669 Jy ! Component: 200 - total flux cleaned = 0.036898 Jy ! Total flux subtracted in 200 components = 0.036898 Jy ! Clean residual min=-0.006764 max=0.007702 Jy/beam ! Clean residual mean=-0.000069 rms=0.002172 Jy/beam ! Combined flux in latest and established models = 0.250442 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 53 model components to the UV plane model. ! The established model now contains 82 components and 0.250442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082914Jy sigma=1.141251 ! Fit after self-cal, rms=0.082891Jy sigma=1.140261 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.722 x 14.83 at -11.97 degrees (North through East) ! Clean map min=-0.0067758 max=0.19377 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01207 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.12 KP 0.94 ! LA 1.00 MK 0.92 NL 0.92 OV 0.94 ! PT 1.08 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.986024 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.05 HN 1.17 KP 1.02 ! LA 0.97 MK 0.96 NL 0.95 OV 0.97 ! PT 1.05 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.082891Jy sigma=1.140261 ! Fit after self-cal, rms=0.082174Jy sigma=1.124875 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082174Jy sigma=1.124875 ! Fit after self-cal, rms=0.082170Jy sigma=1.124860 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=14.88 mas, bpa=-12.32 degrees ! Estimated noise=1.06441 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296821 Jy ! Component: 100 - total flux cleaned = 6.35184e-05 Jy ! Component: 150 - total flux cleaned = 0.000277159 Jy ! Component: 200 - total flux cleaned = 0.000366183 Jy ! Total flux subtracted in 200 components = 0.000366183 Jy ! Clean residual min=-0.005282 max=0.006417 Jy/beam ! Clean residual mean=-0.000015 rms=0.001812 Jy/beam ! Combined flux in latest and established models = 0.250808 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 92 components and 0.250808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082134Jy sigma=1.122803 ! Fit after self-cal, rms=0.082133Jy sigma=1.122634 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082133Jy sigma=1.122634 ! Fit after self-cal, rms=0.074800Jy sigma=1.047047 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109976 Jy ! Component: 100 - total flux cleaned = 0.00115126 Jy ! Component: 150 - total flux cleaned = 0.00119448 Jy ! Component: 200 - total flux cleaned = 0.00122678 Jy ! Total flux subtracted in 200 components = 0.00122678 Jy ! Clean residual min=-0.005476 max=0.005997 Jy/beam ! Clean residual mean=-0.000022 rms=0.001743 Jy/beam ! Combined flux in latest and established models = 0.252035 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 102 components and 0.252035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074750Jy sigma=1.046011 ! Fit after self-cal, rms=0.074594Jy sigma=1.043055 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.686 x 14.88 at -12.32 degrees (North through East) ! Clean map min=-0.0054342 max=0.1916 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074594Jy sigma=1.043055 ! Fit after self-cal, rms=0.073058Jy sigma=1.030625 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073058Jy sigma=1.030625 ! Fit after self-cal, rms=0.073081Jy sigma=1.030284 ! Inverting map and beam ! Estimated beam: bmin=3.671 mas, bmaj=14.76 mas, bpa=-12.32 degrees ! Estimated noise=1.05536 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000288358 Jy ! Component: 100 - total flux cleaned = 9.01788e-05 Jy ! Component: 150 - total flux cleaned = 0.000348517 Jy ! Component: 200 - total flux cleaned = 0.00047216 Jy ! Total flux subtracted in 200 components = 0.00047216 Jy ! Clean residual min=-0.005141 max=0.005418 Jy/beam ! Clean residual mean=-0.000014 rms=0.001633 Jy/beam ! Combined flux in latest and established models = 0.252507 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 111 components and 0.252507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073094Jy sigma=1.029343 ! Fit after self-cal, rms=0.073121Jy sigma=1.029255 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073121Jy sigma=1.029255 ! Fit after self-cal, rms=0.072838Jy sigma=1.021247 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072838Jy sigma=1.021247 ! Fit after self-cal, rms=0.072869Jy sigma=1.021182 ! Inverting map and beam ! Estimated beam: bmin=3.679 mas, bmaj=14.92 mas, bpa=-12.38 degrees ! Estimated noise=1.0488 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00218871 Jy ! Component: 100 - total flux cleaned = -0.00320951 Jy ! Component: 150 - total flux cleaned = -0.00353447 Jy ! Component: 200 - total flux cleaned = -0.00358638 Jy ! Total flux subtracted in 200 components = -0.00358638 Jy ! Clean residual min=-0.005316 max=0.005258 Jy/beam ! Clean residual mean=-0.000051 rms=0.001544 Jy/beam ! Combined flux in latest and established models = 0.248921 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 130 components and 0.248921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072849Jy sigma=1.020216 ! Fit after self-cal, rms=0.072858Jy sigma=1.020148 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.521 mas, bmaj=20.61 mas, bpa=7.602 degrees ! Estimated noise=1.2289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000159092 Jy ! Component: 100 - total flux cleaned = -0.000351685 Jy ! Component: 150 - total flux cleaned = -0.000468429 Jy ! Component: 200 - total flux cleaned = -0.000492408 Jy ! Total flux subtracted in 200 components = -0.000492408 Jy ! Clean residual min=-0.005908 max=0.005834 Jy/beam ! Clean residual mean=-0.000076 rms=0.001928 Jy/beam ! Combined flux in latest and established models = 0.248429 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 143 components and 0.248429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072881Jy sigma=1.020376 ! Fit after self-cal, rms=0.072885Jy sigma=1.020152 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=13.03 mas, bpa=-12.21 degrees ! Estimated noise=1.68639 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.17179 Jy ! Component: 100 - total flux cleaned = 0.212389 Jy ! Component: 150 - total flux cleaned = 0.227604 Jy ! Component: 200 - total flux cleaned = 0.234997 Jy ! Total flux subtracted in 200 components = 0.234997 Jy ! Clean residual min=-0.007375 max=0.007212 Jy/beam ! Clean residual mean=0.000020 rms=0.002024 Jy/beam ! Combined flux in latest and established models = 0.234997 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.234997 Jy ! Inverting map and beam ! Estimated beam: bmin=3.679 mas, bmaj=14.92 mas, bpa=-12.38 degrees ! Estimated noise=1.0488 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00818295 Jy ! Component: 100 - total flux cleaned = 0.0117586 Jy ! Component: 150 - total flux cleaned = 0.0124301 Jy ! Component: 200 - total flux cleaned = 0.0126297 Jy ! Total flux subtracted in 200 components = 0.0126297 Jy ! Clean residual min=-0.005387 max=0.005283 Jy/beam ! Clean residual mean=-0.000045 rms=0.001579 Jy/beam ! Combined flux in latest and established models = 0.247627 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 68 components and 0.247627 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.521 mas, bmaj=20.61 mas, bpa=7.602 degrees ! Estimated noise=1.2289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000304979 Jy ! Component: 100 - total flux cleaned = 0.000205016 Jy ! Component: 150 - total flux cleaned = 0.000250635 Jy ! Component: 200 - total flux cleaned = 0.000325339 Jy ! Total flux subtracted in 200 components = 0.000325339 Jy ! Clean residual min=-0.005949 max=0.005914 Jy/beam ! Clean residual mean=-0.000074 rms=0.001955 Jy/beam ! Combined flux in latest and established models = 0.247952 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 74 components and 0.247952 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.679 mas, bmaj=14.92 mas, bpa=-12.38 degrees ! Estimated noise=1.0488 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 7.99072e-05 Jy ! Component: 100 - total flux cleaned = 0.000408427 Jy ! Component: 150 - total flux cleaned = 0.000661405 Jy ! Component: 200 - total flux cleaned = 0.000751495 Jy ! Total flux subtracted in 200 components = 0.000751495 Jy ! Clean residual min=-0.005327 max=0.005186 Jy/beam ! Clean residual mean=-0.000049 rms=0.001553 Jy/beam ! Combined flux in latest and established models = 0.248704 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 84 components and 0.248704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072872Jy sigma=1.020894 ! Fit after self-cal, rms=0.072866Jy sigma=1.020768 wmodel J0907-2026_S_2005_05_12_yyk\_map.mod ! Writing 84 model components to file: J0907-2026_S_2005_05_12_yyk_map.mod wobs J0907-2026_S_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J0907-2026_S_2005_05_12_yyk_uvs.fits wwins J0907-2026_S_2005_05_12_yyk\_map.win ! wwins: Wrote 1 windows to J0907-2026_S_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000703665 Jy ! Component: 100 - total flux cleaned = 0.0014742 Jy ! Component: 150 - total flux cleaned = 0.00163455 Jy ! Component: 200 - total flux cleaned = 0.00184832 Jy ! Component: 250 - total flux cleaned = 0.00225269 Jy ! Component: 300 - total flux cleaned = 0.00244438 Jy ! Component: 350 - total flux cleaned = 0.00287206 Jy ! Component: 400 - total flux cleaned = 0.00316652 Jy ! Component: 450 - total flux cleaned = 0.00322508 Jy ! Component: 500 - total flux cleaned = 0.00361091 Jy ! Component: 550 - total flux cleaned = 0.00350463 Jy ! Component: 600 - total flux cleaned = 0.00340164 Jy ! Component: 650 - total flux cleaned = 0.00319838 Jy ! Component: 700 - total flux cleaned = 0.00300119 Jy ! Component: 750 - total flux cleaned = 0.00305011 Jy ! Component: 800 - total flux cleaned = 0.00305072 Jy ! Component: 850 - total flux cleaned = 0.00300513 Jy ! Component: 900 - total flux cleaned = 0.00305032 Jy ! Component: 950 - total flux cleaned = 0.00300633 Jy ! Component: 1000 - total flux cleaned = 0.0030487 Jy ! Component: 1050 - total flux cleaned = 0.00300565 Jy ! Component: 1100 - total flux cleaned = 0.00296436 Jy ! Component: 1150 - total flux cleaned = 0.00292303 Jy ! Component: 1200 - total flux cleaned = 0.00284295 Jy ! Component: 1250 - total flux cleaned = 0.0027261 Jy ! Component: 1300 - total flux cleaned = 0.00276483 Jy ! Component: 1350 - total flux cleaned = 0.00276445 Jy ! Component: 1400 - total flux cleaned = 0.00261424 Jy ! Component: 1450 - total flux cleaned = 0.00246618 Jy ! Component: 1500 - total flux cleaned = 0.0023205 Jy ! Component: 1550 - total flux cleaned = 0.0021769 Jy ! Component: 1600 - total flux cleaned = 0.00207098 Jy ! Component: 1650 - total flux cleaned = 0.00200177 Jy ! Component: 1700 - total flux cleaned = 0.00182997 Jy ! Component: 1750 - total flux cleaned = 0.00179601 Jy ! Component: 1800 - total flux cleaned = 0.00166133 Jy ! Component: 1850 - total flux cleaned = 0.0015954 Jy ! Component: 1900 - total flux cleaned = 0.00146479 Jy ! Component: 1950 - total flux cleaned = 0.00140055 Jy ! Component: 2000 - total flux cleaned = 0.00130475 Jy ! Total flux subtracted in 2048 components = 0.00117852 Jy ! Clean residual min=-0.001842 max=0.001798 Jy/beam ! Clean residual mean=-0.000051 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.249882 Jy keep ! Adding 154 model components to the UV plane model. ! The established model now contains 238 components and 0.249882 Jy ![Exited script file: muppet] wmap "J0907-2026_S_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.679 x 14.92 at -12.38 degrees (North through East) ! Clean map min=-0.0030916 max=0.18852 Jy/beam ! Writing clean map to FITS file: J0907-2026_S_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.188524 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000701657 device "J0907-2026_S_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0907-2026_S_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.11655 1.11655 2.23311 4.46622 8.93243 17.8649 35.7297 71.4594 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.188 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.679 x 14.92 at -12.38 degrees (North through East) ! Clean map min=-0.0030916 max=0.18852 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0907-2026_S_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0907-2026_S_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0907-2026_S_2005_05_12_yyk_uvs.log closed on Sat Oct 8 17:12:09 2005