! Started logfile: J0903-3117_S_2005_06_01_yyk_uvs.log on Sat Oct 8 17:11:39 2005 obs J0903-3117_S_2005_06_01_yyk_uve.fits ! Reading UV FITS file: J0903-3117_S_2005_06_01_yyk_uve.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J0903-3117 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1802 lines of history. ! ! Reading 2016 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0903-3117_S_2005_06_01_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.147629 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.775 mas, bmaj=16.29 mas, bpa=-13.55 degrees ! Estimated noise=1.55238 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -0.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0909236 Jy ! Component: 100 - total flux cleaned = 0.120465 Jy ! Total flux subtracted in 100 components = 0.120465 Jy ! Clean residual min=-0.012890 max=0.010004 Jy/beam ! Clean residual mean=-0.000057 rms=0.003206 Jy/beam ! Combined flux in latest and established models = 0.120464 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.120464 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.081156Jy sigma=1.143544 ! Fit after self-cal, rms=0.080129Jy sigma=1.111078 ! Inverting map and beam ! Estimated beam: bmin=2.775 mas, bmaj=16.29 mas, bpa=-13.55 degrees ! Estimated noise=1.55238 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.716 mas, bmaj=19.13 mas, bpa=-12.56 degrees ! Estimated noise=0.999101 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177921 Jy ! Component: 100 - total flux cleaned = 0.0250017 Jy ! Component: 150 - total flux cleaned = 0.0283892 Jy ! Component: 200 - total flux cleaned = 0.0300089 Jy ! Total flux subtracted in 200 components = 0.0300089 Jy ! Clean residual min=-0.004402 max=0.003299 Jy/beam ! Clean residual mean=-0.000264 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 0.150473 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 59 components and 0.150473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076197Jy sigma=1.058799 ! Fit after self-cal, rms=0.076160Jy sigma=1.057953 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.716 x 19.13 at -12.56 degrees (North through East) ! Clean map min=-0.0043299 max=0.11196 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.983468 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.00* KP 0.96 ! LA 1.13 MK 1.05 NL 1.10 OV 0.96 ! PT 0.96 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.076160Jy sigma=1.057953 ! Fit after self-cal, rms=0.076486Jy sigma=1.054984 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076486Jy sigma=1.054984 ! Fit after self-cal, rms=0.076450Jy sigma=1.054260 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.747 mas, bmaj=19.1 mas, bpa=-12.53 degrees ! Estimated noise=0.996779 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000342948 Jy ! Component: 100 - total flux cleaned = -0.00025931 Jy ! Component: 150 - total flux cleaned = -0.000222768 Jy ! Component: 200 - total flux cleaned = -0.000187512 Jy ! Total flux subtracted in 200 components = -0.000187512 Jy ! Clean residual min=-0.003799 max=0.003259 Jy/beam ! Clean residual mean=-0.000173 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 0.150286 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 76 components and 0.150286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076442Jy sigma=1.053634 ! Fit after self-cal, rms=0.076411Jy sigma=1.052975 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076411Jy sigma=1.052975 ! Fit after self-cal, rms=0.073004Jy sigma=0.992517 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186066 Jy ! Component: 100 - total flux cleaned = 0.00203642 Jy ! Component: 150 - total flux cleaned = 0.00216423 Jy ! Component: 200 - total flux cleaned = 0.00216239 Jy ! Total flux subtracted in 200 components = 0.00216239 Jy ! Clean residual min=-0.004002 max=0.002842 Jy/beam ! Clean residual mean=-0.000171 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.152448 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 96 components and 0.152448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072760Jy sigma=0.990993 ! Fit after self-cal, rms=0.072606Jy sigma=0.988037 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.747 x 19.1 at -12.53 degrees (North through East) ! Clean map min=-0.0039619 max=0.11372 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072606Jy sigma=0.988037 ! Fit after self-cal, rms=0.073391Jy sigma=0.980938 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073391Jy sigma=0.980938 ! Fit after self-cal, rms=0.073400Jy sigma=0.980610 ! Inverting map and beam ! Estimated beam: bmin=3.742 mas, bmaj=18.95 mas, bpa=-12.66 degrees ! Estimated noise=1.01135 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239254 Jy ! Component: 100 - total flux cleaned = 0.00306714 Jy ! Component: 150 - total flux cleaned = 0.00304473 Jy ! Component: 200 - total flux cleaned = 0.00302351 Jy ! Total flux subtracted in 200 components = 0.00302351 Jy ! Clean residual min=-0.003399 max=0.002540 Jy/beam ! Clean residual mean=-0.000162 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.155472 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 107 components and 0.155472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073177Jy sigma=0.979537 ! Fit after self-cal, rms=0.073182Jy sigma=0.979494 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073182Jy sigma=0.979494 ! Fit after self-cal, rms=0.073453Jy sigma=0.980434 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073453Jy sigma=0.980434 ! Fit after self-cal, rms=0.073454Jy sigma=0.980282 ! Inverting map and beam ! Estimated beam: bmin=3.729 mas, bmaj=18.76 mas, bpa=-12.63 degrees ! Estimated noise=1.01333 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146462 Jy ! Component: 100 - total flux cleaned = 0.00193999 Jy ! Component: 150 - total flux cleaned = 0.00200176 Jy ! Component: 200 - total flux cleaned = 0.00201903 Jy ! Total flux subtracted in 200 components = 0.00201903 Jy ! Clean residual min=-0.004066 max=0.002955 Jy/beam ! Clean residual mean=-0.000220 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.157491 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 121 components and 0.157491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073357Jy sigma=0.979856 ! Fit after self-cal, rms=0.073356Jy sigma=0.979792 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.6 mas, bmaj=29.06 mas, bpa=8.634 degrees ! Estimated noise=1.18106 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000154648 Jy ! Component: 100 - total flux cleaned = -0.000188102 Jy ! Component: 150 - total flux cleaned = -0.000188562 Jy ! Component: 200 - total flux cleaned = -0.000202634 Jy ! Total flux subtracted in 200 components = -0.000202634 Jy ! Clean residual min=-0.004025 max=0.002767 Jy/beam ! Clean residual mean=-0.000337 rms=0.001367 Jy/beam ! Combined flux in latest and established models = 0.157288 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 126 components and 0.157288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073351Jy sigma=0.979761 ! Fit after self-cal, rms=0.073352Jy sigma=0.979751 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.778 mas, bmaj=16.13 mas, bpa=-13.69 degrees ! Estimated noise=1.5743 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0959055 Jy ! Component: 100 - total flux cleaned = 0.124988 Jy ! Component: 150 - total flux cleaned = 0.139126 Jy ! Component: 200 - total flux cleaned = 0.147997 Jy ! Total flux subtracted in 200 components = 0.147997 Jy ! Clean residual min=-0.008961 max=0.005153 Jy/beam ! Clean residual mean=-0.000046 rms=0.001706 Jy/beam ! Combined flux in latest and established models = 0.147997 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.147997 Jy ! Inverting map and beam ! Estimated beam: bmin=3.729 mas, bmaj=18.76 mas, bpa=-12.63 degrees ! Estimated noise=1.01333 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00569036 Jy ! Component: 100 - total flux cleaned = 0.0081458 Jy ! Component: 150 - total flux cleaned = 0.00861392 Jy ! Component: 200 - total flux cleaned = 0.00870806 Jy ! Total flux subtracted in 200 components = 0.00870807 Jy ! Clean residual min=-0.004060 max=0.002811 Jy/beam ! Clean residual mean=-0.000211 rms=0.001149 Jy/beam ! Combined flux in latest and established models = 0.156706 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 81 components and 0.156706 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.6 mas, bmaj=29.06 mas, bpa=8.634 degrees ! Estimated noise=1.18106 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000581294 Jy ! Component: 100 - total flux cleaned = 0.0005548 Jy ! Component: 150 - total flux cleaned = 0.000554145 Jy ! Component: 200 - total flux cleaned = 0.000510195 Jy ! Total flux subtracted in 200 components = 0.000510195 Jy ! Clean residual min=-0.004006 max=0.002789 Jy/beam ! Clean residual mean=-0.000335 rms=0.001398 Jy/beam ! Combined flux in latest and established models = 0.157216 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 90 components and 0.157216 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.729 mas, bmaj=18.76 mas, bpa=-12.63 degrees ! Estimated noise=1.01333 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.5565e-05 Jy ! Component: 100 - total flux cleaned = 0.000107525 Jy ! Component: 150 - total flux cleaned = 0.000168162 Jy ! Component: 200 - total flux cleaned = 0.000223731 Jy ! Total flux subtracted in 200 components = 0.000223731 Jy ! Clean residual min=-0.004082 max=0.002813 Jy/beam ! Clean residual mean=-0.000219 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.157439 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 99 components and 0.157439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073338Jy sigma=0.980421 ! Fit after self-cal, rms=0.073344Jy sigma=0.980354 wmodel J0903-3117_S_2005_06_01_yyk\_map.mod ! Writing 99 model components to file: J0903-3117_S_2005_06_01_yyk_map.mod wobs J0903-3117_S_2005_06_01_yyk\_uvs.fits ! Writing UV FITS file: J0903-3117_S_2005_06_01_yyk_uvs.fits wwins J0903-3117_S_2005_06_01_yyk\_map.win ! wwins: Wrote 1 windows to J0903-3117_S_2005_06_01_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00175553 Jy ! Component: 100 - total flux cleaned = -0.00324805 Jy ! Component: 150 - total flux cleaned = -0.00445007 Jy ! Component: 200 - total flux cleaned = -0.00521208 Jy ! Component: 250 - total flux cleaned = -0.00569239 Jy ! Component: 300 - total flux cleaned = -0.00628296 Jy ! Component: 350 - total flux cleaned = -0.00671266 Jy ! Component: 400 - total flux cleaned = -0.00724394 Jy ! Component: 450 - total flux cleaned = -0.00790685 Jy ! Component: 500 - total flux cleaned = -0.00831803 Jy ! Component: 550 - total flux cleaned = -0.00875064 Jy ! Component: 600 - total flux cleaned = -0.00896031 Jy ! Component: 650 - total flux cleaned = -0.00912923 Jy ! Component: 700 - total flux cleaned = -0.0093267 Jy ! Component: 750 - total flux cleaned = -0.00958348 Jy ! Component: 800 - total flux cleaned = -0.00986494 Jy ! Component: 850 - total flux cleaned = -0.0101099 Jy ! Component: 900 - total flux cleaned = -0.0104107 Jy ! Component: 950 - total flux cleaned = -0.0106176 Jy ! Component: 1000 - total flux cleaned = -0.0109369 Jy ! Component: 1050 - total flux cleaned = -0.011108 Jy ! Component: 1100 - total flux cleaned = -0.0113039 Jy ! Component: 1150 - total flux cleaned = -0.0114415 Jy ! Component: 1200 - total flux cleaned = -0.0115502 Jy ! Component: 1250 - total flux cleaned = -0.0117113 Jy ! Component: 1300 - total flux cleaned = -0.0119222 Jy ! Component: 1350 - total flux cleaned = -0.0120523 Jy ! Component: 1400 - total flux cleaned = -0.0122318 Jy ! Component: 1450 - total flux cleaned = -0.0124591 Jy ! Component: 1500 - total flux cleaned = -0.0125832 Jy ! Component: 1550 - total flux cleaned = -0.0126817 Jy ! Component: 1600 - total flux cleaned = -0.0128996 Jy ! Component: 1650 - total flux cleaned = -0.0130193 Jy ! Component: 1700 - total flux cleaned = -0.0132079 Jy ! Component: 1750 - total flux cleaned = -0.0133707 Jy ! Component: 1800 - total flux cleaned = -0.0134856 Jy ! Component: 1850 - total flux cleaned = -0.013667 Jy ! Component: 1900 - total flux cleaned = -0.0138461 Jy ! Component: 1950 - total flux cleaned = -0.0140672 Jy ! Component: 2000 - total flux cleaned = -0.0141764 Jy ! Total flux subtracted in 2048 components = -0.0143279 Jy ! Clean residual min=-0.001248 max=0.001214 Jy/beam ! Clean residual mean=-0.000099 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.143112 Jy keep ! Adding 123 model components to the UV plane model. ! The established model now contains 222 components and 0.143111 Jy ![Exited script file: muppet] wmap "J0903-3117_S_2005_06_01_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.729 x 18.76 at -12.63 degrees (North through East) ! Clean map min=-0.0036586 max=0.11822 Jy/beam ! Writing clean map to FITS file: J0903-3117_S_2005_06_01_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.118222 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00047027 device "J0903-3117_S_2005_06_01_yyk\_map.eps/VPS" ! Attempting to open device: 'J0903-3117_S_2005_06_01_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.19335 1.19335 2.38671 4.77341 9.54683 19.0937 38.1873 76.3746 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.118 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.729 x 18.76 at -12.63 degrees (North through East) ! Clean map min=-0.0036586 max=0.11822 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0903-3117_S_2005_06_01_yyk\_map.gif/gif" ! Attempting to open device: 'J0903-3117_S_2005_06_01_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0903-3117_S_2005_06_01_yyk_uvs.log closed on Sat Oct 8 17:11:43 2005