! Started logfile: J0853-0150_S_2005_06_30_yyk_uvs.log on Sat Oct 8 17:10:58 2005 obs J0853-0150_S_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J0853-0150_S_2005_06_30_yyk_uve.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.913889 visibilities/baseline/integration-bin. ! Found source: J0853-0150 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1469 lines of history. ! ! Reading 2632 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0853-0150_S_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.130982 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.53 mas, bmaj=6.524 mas, bpa=-0.8609 degrees ! Estimated noise=1.07279 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0939579 Jy ! Component: 100 - total flux cleaned = 0.110466 Jy ! Total flux subtracted in 100 components = 0.110466 Jy ! Clean residual min=-0.004567 max=0.005013 Jy/beam ! Clean residual mean=0.000022 rms=0.001274 Jy/beam ! Combined flux in latest and established models = 0.110466 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.110466 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.064269Jy sigma=1.048643 ! Fit after self-cal, rms=0.064172Jy sigma=1.045427 ! Inverting map and beam ! Estimated beam: bmin=2.53 mas, bmaj=6.524 mas, bpa=-0.8609 degrees ! Estimated noise=1.07279 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.152 mas, bmaj=7.709 mas, bpa=-3.334 degrees ! Estimated noise=0.741401 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00704193 Jy ! Component: 100 - total flux cleaned = 0.00938058 Jy ! Component: 150 - total flux cleaned = 0.00947792 Jy ! Component: 200 - total flux cleaned = 0.00947806 Jy ! Total flux subtracted in 200 components = 0.00947806 Jy ! Clean residual min=-0.003228 max=0.003932 Jy/beam ! Clean residual mean=0.000050 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.119944 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 23 components and 0.119944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063398Jy sigma=1.035039 ! Fit after self-cal, rms=0.063395Jy sigma=1.035000 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.152 x 7.709 at -3.334 degrees (North through East) ! Clean map min=-0.0030427 max=0.11016 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01808 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 1.02 KP 0.99 ! LA 1.02 MK 0.90 NL 0.90 OV 1.00 ! PT 1.07 SC 0.91 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.984784 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.92 KP 1.02 ! LA 1.08 MK 0.98 NL 1.05 OV 1.03 ! PT 1.06 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.968419 ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.94 HN 1.04 KP 0.97 ! LA 0.91 MK 1.03 NL 1.09 OV 0.98 ! PT 1.12 SC 1.11 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.063395Jy sigma=1.035000 ! Fit after self-cal, rms=0.062670Jy sigma=1.025277 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062670Jy sigma=1.025277 ! Fit after self-cal, rms=0.062669Jy sigma=1.025256 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=7.676 mas, bpa=-3.719 degrees ! Estimated noise=0.74215 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206873 Jy ! Component: 100 - total flux cleaned = 0.00222832 Jy ! Component: 150 - total flux cleaned = 0.00226077 Jy ! Component: 200 - total flux cleaned = 0.00229074 Jy ! Total flux subtracted in 200 components = 0.00229074 Jy ! Clean residual min=-0.002868 max=0.004072 Jy/beam ! Clean residual mean=0.000077 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.122235 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 37 components and 0.122235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062561Jy sigma=1.024089 ! Fit after self-cal, rms=0.062560Jy sigma=1.024077 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062560Jy sigma=1.024077 ! Fit after self-cal, rms=0.061182Jy sigma=0.992709 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17.5, 12). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00422308 Jy ! Component: 100 - total flux cleaned = 0.00595017 Jy ! Component: 150 - total flux cleaned = 0.00682065 Jy ! Component: 200 - total flux cleaned = 0.007511 Jy ! Total flux subtracted in 200 components = 0.007511 Jy ! Clean residual min=-0.002499 max=0.003053 Jy/beam ! Clean residual mean=0.000057 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.129746 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 72 components and 0.129746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060995Jy sigma=0.988114 ! Fit after self-cal, rms=0.060972Jy sigma=0.986269 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.092 x 7.676 at -3.719 degrees (North through East) ! Clean map min=-0.0024607 max=0.11111 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060972Jy sigma=0.986269 ! Fit after self-cal, rms=0.061547Jy sigma=0.979136 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061547Jy sigma=0.979136 ! Fit after self-cal, rms=0.061559Jy sigma=0.978989 ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=7.651 mas, bpa=-4.013 degrees ! Estimated noise=0.75459 mJy/beam. ! Added new window around map position (5, 3.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00440221 Jy ! Component: 100 - total flux cleaned = 0.00677236 Jy ! Component: 150 - total flux cleaned = 0.00816481 Jy ! Component: 200 - total flux cleaned = 0.00847353 Jy ! Total flux subtracted in 200 components = 0.00847353 Jy ! Clean residual min=-0.002467 max=0.002799 Jy/beam ! Clean residual mean=0.000023 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.138219 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 94 components and 0.138219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061195Jy sigma=0.973813 ! Fit after self-cal, rms=0.061186Jy sigma=0.973555 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061186Jy sigma=0.973555 ! Fit after self-cal, rms=0.061831Jy sigma=0.971985 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061831Jy sigma=0.971985 ! Fit after self-cal, rms=0.061835Jy sigma=0.971862 ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=7.588 mas, bpa=-3.942 degrees ! Estimated noise=0.754286 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189343 Jy ! Component: 100 - total flux cleaned = 0.00263559 Jy ! Component: 150 - total flux cleaned = 0.00290935 Jy ! Component: 200 - total flux cleaned = 0.00305203 Jy ! Total flux subtracted in 200 components = 0.00305203 Jy ! Clean residual min=-0.002415 max=0.002681 Jy/beam ! Clean residual mean=0.000034 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.141271 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 123 components and 0.141271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061741Jy sigma=0.970676 ! Fit after self-cal, rms=0.061740Jy sigma=0.970603 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.512 mas, bmaj=12.71 mas, bpa=6.484 degrees ! Estimated noise=0.980292 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106288 Jy ! Component: 100 - total flux cleaned = 0.00127369 Jy ! Component: 150 - total flux cleaned = 0.00129365 Jy ! Component: 200 - total flux cleaned = 0.0012928 Jy ! Total flux subtracted in 200 components = 0.0012928 Jy ! Clean residual min=-0.002529 max=0.003116 Jy/beam ! Clean residual mean=0.000068 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.142564 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 138 components and 0.142564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061724Jy sigma=0.970455 ! Fit after self-cal, rms=0.061725Jy sigma=0.970428 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.494 mas, bmaj=6.505 mas, bpa=-1.111 degrees ! Estimated noise=1.07263 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0946672 Jy ! Component: 100 - total flux cleaned = 0.113054 Jy ! Component: 150 - total flux cleaned = 0.121888 Jy ! Component: 200 - total flux cleaned = 0.127684 Jy ! Total flux subtracted in 200 components = 0.127684 Jy ! Clean residual min=-0.003924 max=0.003873 Jy/beam ! Clean residual mean=0.000011 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.127684 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.127684 Jy ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=7.588 mas, bpa=-3.942 degrees ! Estimated noise=0.754286 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00469636 Jy ! Component: 100 - total flux cleaned = 0.00773259 Jy ! Component: 150 - total flux cleaned = 0.0100368 Jy ! Component: 200 - total flux cleaned = 0.0116302 Jy ! Total flux subtracted in 200 components = 0.0116302 Jy ! Clean residual min=-0.002465 max=0.002584 Jy/beam ! Clean residual mean=0.000042 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.139314 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 70 components and 0.139314 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.512 mas, bmaj=12.71 mas, bpa=6.484 degrees ! Estimated noise=0.980292 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193752 Jy ! Component: 100 - total flux cleaned = 0.00271538 Jy ! Component: 150 - total flux cleaned = 0.00309698 Jy ! Component: 200 - total flux cleaned = 0.00315436 Jy ! Total flux subtracted in 200 components = 0.00315436 Jy ! Clean residual min=-0.002472 max=0.003084 Jy/beam ! Clean residual mean=0.000069 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.142469 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 104 components and 0.142469 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=7.588 mas, bpa=-3.942 degrees ! Estimated noise=0.754286 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -1.8479e-05 Jy ! Component: 100 - total flux cleaned = 7.04324e-05 Jy ! Component: 150 - total flux cleaned = 0.000184806 Jy ! Component: 200 - total flux cleaned = 0.000254086 Jy ! Total flux subtracted in 200 components = 0.000254086 Jy ! Clean residual min=-0.002385 max=0.002667 Jy/beam ! Clean residual mean=0.000030 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.142723 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 127 components and 0.142723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061735Jy sigma=0.970665 ! Fit after self-cal, rms=0.061734Jy sigma=0.970615 wmodel J0853-0150_S_2005_06_30_yyk\_map.mod ! Writing 127 model components to file: J0853-0150_S_2005_06_30_yyk_map.mod wobs J0853-0150_S_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J0853-0150_S_2005_06_30_yyk_uvs.fits wwins J0853-0150_S_2005_06_30_yyk\_map.win ! wwins: Wrote 3 windows to J0853-0150_S_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00072191 Jy ! Component: 100 - total flux cleaned = 0.000678986 Jy ! Component: 150 - total flux cleaned = 0.00047792 Jy ! Component: 200 - total flux cleaned = 0.000362498 Jy ! Component: 250 - total flux cleaned = 0.000106813 Jy ! Component: 300 - total flux cleaned = -0.000207299 Jy ! Component: 350 - total flux cleaned = -0.000274183 Jy ! Component: 400 - total flux cleaned = -0.000502791 Jy ! Component: 450 - total flux cleaned = -0.000660942 Jy ! Component: 500 - total flux cleaned = -0.000691342 Jy ! Component: 550 - total flux cleaned = -0.000780803 Jy ! Component: 600 - total flux cleaned = -0.000838763 Jy ! Component: 650 - total flux cleaned = -0.00089597 Jy ! Component: 700 - total flux cleaned = -0.000979915 Jy ! Component: 750 - total flux cleaned = -0.00100756 Jy ! Component: 800 - total flux cleaned = -0.00103453 Jy ! Component: 850 - total flux cleaned = -0.000956934 Jy ! Component: 900 - total flux cleaned = -0.00103464 Jy ! Component: 950 - total flux cleaned = -0.000984393 Jy ! Component: 1000 - total flux cleaned = -0.00098476 Jy ! Component: 1050 - total flux cleaned = -0.000960592 Jy ! Component: 1100 - total flux cleaned = -0.000936745 Jy ! Component: 1150 - total flux cleaned = -0.000913002 Jy ! Component: 1200 - total flux cleaned = -0.000866081 Jy ! Component: 1250 - total flux cleaned = -0.000796836 Jy ! Component: 1300 - total flux cleaned = -0.000796822 Jy ! Component: 1350 - total flux cleaned = -0.000796766 Jy ! Component: 1400 - total flux cleaned = -0.00081863 Jy ! Component: 1450 - total flux cleaned = -0.000840477 Jy ! Component: 1500 - total flux cleaned = -0.000861693 Jy ! Component: 1550 - total flux cleaned = -0.000776126 Jy ! Component: 1600 - total flux cleaned = -0.000860204 Jy ! Component: 1650 - total flux cleaned = -0.000839065 Jy ! Component: 1700 - total flux cleaned = -0.000777531 Jy ! Component: 1750 - total flux cleaned = -0.000818192 Jy ! Component: 1800 - total flux cleaned = -0.000778097 Jy ! Component: 1850 - total flux cleaned = -0.000798088 Jy ! Component: 1900 - total flux cleaned = -0.000797955 Jy ! Component: 1950 - total flux cleaned = -0.000778403 Jy ! Component: 2000 - total flux cleaned = -0.00073982 Jy ! Total flux subtracted in 2048 components = -0.000778216 Jy ! Clean residual min=-0.001316 max=0.001204 Jy/beam ! Clean residual mean=0.000019 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.141945 Jy keep ! Adding 139 model components to the UV plane model. ! The established model now contains 266 components and 0.141945 Jy ![Exited script file: muppet] wmap "J0853-0150_S_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.028 x 7.588 at -3.942 degrees (North through East) ! Clean map min=-0.0022297 max=0.11171 Jy/beam ! Writing clean map to FITS file: J0853-0150_S_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.111709 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000389869 device "J0853-0150_S_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0853-0150_S_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04701 1.04701 2.09403 4.18806 8.37612 16.7522 33.5045 67.0089 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.111 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.028 x 7.588 at -3.942 degrees (North through East) ! Clean map min=-0.0022297 max=0.11171 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0853-0150_S_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0853-0150_S_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0853-0150_S_2005_06_30_yyk_uvs.log closed on Sat Oct 8 17:11:02 2005