! Started logfile: J0819-0630_S_2005_06_01_yyk_uvs.log on Sat Oct  8 17:09:35 2005
obs J0819-0630_S_2005_06_01_yyk_uve.fits
! Reading UV FITS file: J0819-0630_S_2005_06_01_yyk_uve.fits
! AN table 1: 19 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.853801 visibilities/baseline/integration-bin.
! Found source: J0819-0630
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1803 lines of history.
! 
! Reading 2920 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0819-0630_S_2005_06_01_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.147897 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.603 mas, bmaj=6.706 mas, bpa=-1.976 degrees
! Estimated noise=1.21724 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0901681 Jy
! Component: 100  -  total flux cleaned = 0.11532 Jy
! Total flux subtracted in 100 components = 0.11532 Jy
! Clean residual min=-0.008464 max=0.013360 Jy/beam
! Clean residual mean=0.000268 rms=0.002721 Jy/beam
! Combined flux in latest and established models = 0.11532 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.11532 Jy
! 
! Correcting IF 1.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.097084Jy  sigma=1.509262
! Fit after  self-cal, rms=0.081882Jy  sigma=1.271961
! Inverting map and beam 
! Estimated beam: bmin=2.603 mas, bmaj=6.706 mas, bpa=-1.976 degrees
! Estimated noise=1.21724 mJy/beam.
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0224746 Jy
! Component: 100  -  total flux cleaned = 0.0338215 Jy
! Total flux subtracted in 100 components = 0.0338215 Jy
! Clean residual min=-0.008254 max=0.007154 Jy/beam
! Clean residual mean=0.000054 rms=0.001893 Jy/beam
! Combined flux in latest and established models = 0.149142 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 55 components and 0.149142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075405Jy  sigma=1.143936
! Fit after  self-cal, rms=0.075436Jy  sigma=1.143195
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.242 mas, bmaj=8.213 mas, bpa=-5.328 degrees
! Estimated noise=0.701817 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00811889 Jy
! Component: 100  -  total flux cleaned = 0.0114471 Jy
! Component: 150  -  total flux cleaned = 0.0129393 Jy
! Component: 200  -  total flux cleaned = 0.0133202 Jy
! Total flux subtracted in 200 components = 0.0133202 Jy
! Clean residual min=-0.005129 max=0.005001 Jy/beam
! Clean residual mean=0.000032 rms=0.001396 Jy/beam
! Combined flux in latest and established models = 0.162462 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 68 components and 0.162462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074541Jy  sigma=1.130213
! Fit after  self-cal, rms=0.074567Jy  sigma=1.129936
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.242 x 8.213 at -5.328 degrees (North through East)
! Clean map  min=-0.0048987  max=0.11585 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.01614
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.08     HN        1.04     KP        1.01     
!   LA        1.09     MK        0.84     NL        0.92     OV        0.98     
!   PT        0.99     SC        0.84     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.074567Jy  sigma=1.129936
! Fit after  self-cal, rms=0.074135Jy  sigma=1.123446
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074135Jy  sigma=1.123446
! Fit after  self-cal, rms=0.074132Jy  sigma=1.123437
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.141 mas, bmaj=8.027 mas, bpa=-5.248 degrees
! Estimated noise=0.702226 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00287772 Jy
! Component: 100  -  total flux cleaned = 0.00405751 Jy
! Component: 150  -  total flux cleaned = 0.00420077 Jy
! Component: 200  -  total flux cleaned = 0.00429949 Jy
! Total flux subtracted in 200 components = 0.00429949 Jy
! Clean residual min=-0.005090 max=0.004731 Jy/beam
! Clean residual mean=0.000032 rms=0.001309 Jy/beam
! Combined flux in latest and established models = 0.166761 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 74 components and 0.166761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073908Jy  sigma=1.121611
! Fit after  self-cal, rms=0.073919Jy  sigma=1.121521
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073919Jy  sigma=1.121521
! Fit after  self-cal, rms=0.068324Jy  sigma=1.039096
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144361 Jy
! Component: 100  -  total flux cleaned = 0.00149832 Jy
! Component: 150  -  total flux cleaned = 0.00157416 Jy
! Component: 200  -  total flux cleaned = 0.00160895 Jy
! Total flux subtracted in 200 components = 0.00160895 Jy
! Clean residual min=-0.004531 max=0.004245 Jy/beam
! Clean residual mean=0.000028 rms=0.001247 Jy/beam
! Combined flux in latest and established models = 0.16837 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 79 components and 0.16837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068186Jy  sigma=1.037509
! Fit after  self-cal, rms=0.067910Jy  sigma=1.033917
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.141 x 8.027 at -5.248 degrees (North through East)
! Clean map  min=-0.0042836  max=0.11738 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067910Jy  sigma=1.033917
! Fit after  self-cal, rms=0.067666Jy  sigma=1.032979
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067666Jy  sigma=1.032979
! Fit after  self-cal, rms=0.067651Jy  sigma=1.032673
! Inverting map and beam 
! Estimated beam: bmin=3.137 mas, bmaj=7.975 mas, bpa=-4.912 degrees
! Estimated noise=0.699618 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000254215 Jy
! Component: 100  -  total flux cleaned = -0.00018342 Jy
! Component: 150  -  total flux cleaned = -0.000120733 Jy
! Component: 200  -  total flux cleaned = -9.095e-05 Jy
! Total flux subtracted in 200 components = -9.095e-05 Jy
! Clean residual min=-0.004542 max=0.004232 Jy/beam
! Clean residual mean=0.000026 rms=0.001236 Jy/beam
! Combined flux in latest and established models = 0.168279 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 85 components and 0.168279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067620Jy  sigma=1.032121
! Fit after  self-cal, rms=0.067621Jy  sigma=1.032012
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067621Jy  sigma=1.032012
! Fit after  self-cal, rms=0.067704Jy  sigma=1.028970
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067704Jy  sigma=1.028970
! Fit after  self-cal, rms=0.067704Jy  sigma=1.028940
! Inverting map and beam 
! Estimated beam: bmin=3.157 mas, bmaj=7.985 mas, bpa=-4.761 degrees
! Estimated noise=0.70112 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.05341e-05 Jy
! Component: 100  -  total flux cleaned = -5.54002e-05 Jy
! Component: 150  -  total flux cleaned = -5.58994e-05 Jy
! Component: 200  -  total flux cleaned = -5.60265e-05 Jy
! Total flux subtracted in 200 components = -5.60265e-05 Jy
! Clean residual min=-0.004676 max=0.004252 Jy/beam
! Clean residual mean=0.000023 rms=0.001251 Jy/beam
! Combined flux in latest and established models = 0.168223 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 87 components and 0.168223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067685Jy  sigma=1.028490
! Fit after  self-cal, rms=0.067682Jy  sigma=1.028420
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.752 mas, bmaj=13.62 mas, bpa=4.932 degrees
! Estimated noise=0.899334 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000203108 Jy
! Component: 100  -  total flux cleaned = 0.000139653 Jy
! Component: 150  -  total flux cleaned = 8.92872e-05 Jy
! Component: 200  -  total flux cleaned = 8.52248e-05 Jy
! Total flux subtracted in 200 components = 8.52248e-05 Jy
! Clean residual min=-0.005605 max=0.006156 Jy/beam
! Clean residual mean=0.000049 rms=0.002010 Jy/beam
! Combined flux in latest and established models = 0.168309 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 93 components and 0.168309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067663Jy  sigma=1.028456
! Fit after  self-cal, rms=0.067654Jy  sigma=1.028251
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.576 mas, bmaj=6.628 mas, bpa=-1.653 degrees
! Estimated noise=1.20007 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.102106 Jy
! Component: 100  -  total flux cleaned = 0.132962 Jy
! Component: 150  -  total flux cleaned = 0.148556 Jy
! Component: 200  -  total flux cleaned = 0.157413 Jy
! Total flux subtracted in 200 components = 0.157413 Jy
! Clean residual min=-0.006356 max=0.006318 Jy/beam
! Clean residual mean=0.000024 rms=0.001580 Jy/beam
! Combined flux in latest and established models = 0.157413 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 48 model components to the UV plane model.
! The established model now contains 48 components and 0.157413 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.157 mas, bmaj=7.985 mas, bpa=-4.761 degrees
! Estimated noise=0.70112 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00634521 Jy
! Component: 100  -  total flux cleaned = 0.00856995 Jy
! Component: 150  -  total flux cleaned = 0.00950853 Jy
! Component: 200  -  total flux cleaned = 0.00959144 Jy
! Total flux subtracted in 200 components = 0.00959144 Jy
! Clean residual min=-0.004769 max=0.004426 Jy/beam
! Clean residual mean=0.000030 rms=0.001256 Jy/beam
! Combined flux in latest and established models = 0.167005 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 64 components and 0.167005 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.752 mas, bmaj=13.62 mas, bpa=4.932 degrees
! Estimated noise=0.899334 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000682639 Jy
! Component: 100  -  total flux cleaned = 0.000705445 Jy
! Component: 150  -  total flux cleaned = 0.000755884 Jy
! Component: 200  -  total flux cleaned = 0.00080165 Jy
! Total flux subtracted in 200 components = 0.00080165 Jy
! Clean residual min=-0.005646 max=0.006172 Jy/beam
! Clean residual mean=0.000055 rms=0.002010 Jy/beam
! Combined flux in latest and established models = 0.167807 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 67 components and 0.167807 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.157 mas, bmaj=7.985 mas, bpa=-4.761 degrees
! Estimated noise=0.70112 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000469066 Jy
! Component: 100  -  total flux cleaned = -0.000467569 Jy
! Component: 150  -  total flux cleaned = -0.000440515 Jy
! Component: 200  -  total flux cleaned = -0.000440623 Jy
! Total flux subtracted in 200 components = -0.000440623 Jy
! Clean residual min=-0.004744 max=0.004431 Jy/beam
! Clean residual mean=0.000028 rms=0.001249 Jy/beam
! Combined flux in latest and established models = 0.167366 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 72 components and 0.167366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067699Jy  sigma=1.028818
! Fit after  self-cal, rms=0.067689Jy  sigma=1.028578
wmodel J0819-0630_S_2005_06_01_yyk\_map.mod
! Writing 72 model components to file: J0819-0630_S_2005_06_01_yyk_map.mod
wobs J0819-0630_S_2005_06_01_yyk\_uvs.fits
! Writing UV FITS file: J0819-0630_S_2005_06_01_yyk_uvs.fits
wwins J0819-0630_S_2005_06_01_yyk\_map.win
! wwins: Wrote 1 windows to J0819-0630_S_2005_06_01_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00113321 Jy
! Component: 100  -  total flux cleaned = -0.00136526 Jy
! Component: 150  -  total flux cleaned = -0.0012339 Jy
! Component: 200  -  total flux cleaned = -0.00110678 Jy
! Component: 250  -  total flux cleaned = -0.000750233 Jy
! Component: 300  -  total flux cleaned = -0.000412351 Jy
! Component: 350  -  total flux cleaned = -8.7763e-05 Jy
! Component: 400  -  total flux cleaned = 0.000223333 Jy
! Component: 450  -  total flux cleaned = 0.0004738 Jy
! Component: 500  -  total flux cleaned = 0.000713891 Jy
! Component: 550  -  total flux cleaned = 0.000900558 Jy
! Component: 600  -  total flux cleaned = 0.00117008 Jy
! Component: 650  -  total flux cleaned = 0.00125586 Jy
! Component: 700  -  total flux cleaned = 0.00129705 Jy
! Component: 750  -  total flux cleaned = 0.00133754 Jy
! Component: 800  -  total flux cleaned = 0.00129764 Jy
! Component: 850  -  total flux cleaned = 0.00125927 Jy
! Component: 900  -  total flux cleaned = 0.00129746 Jy
! Component: 950  -  total flux cleaned = 0.00137101 Jy
! Component: 1000  -  total flux cleaned = 0.001298 Jy
! Component: 1050  -  total flux cleaned = 0.00136928 Jy
! Component: 1100  -  total flux cleaned = 0.00129933 Jy
! Component: 1150  -  total flux cleaned = 0.00133337 Jy
! Component: 1200  -  total flux cleaned = 0.00129956 Jy
! Component: 1250  -  total flux cleaned = 0.00120082 Jy
! Component: 1300  -  total flux cleaned = 0.00123379 Jy
! Component: 1350  -  total flux cleaned = 0.00116992 Jy
! Component: 1400  -  total flux cleaned = 0.00113879 Jy
! Component: 1450  -  total flux cleaned = 0.00120105 Jy
! Component: 1500  -  total flux cleaned = 0.00135297 Jy
! Component: 1550  -  total flux cleaned = 0.00129163 Jy
! Component: 1600  -  total flux cleaned = 0.00117358 Jy
! Component: 1650  -  total flux cleaned = 0.0013189 Jy
! Component: 1700  -  total flux cleaned = 0.00120377 Jy
! Component: 1750  -  total flux cleaned = 0.00126075 Jy
! Component: 1800  -  total flux cleaned = 0.00117666 Jy
! Component: 1850  -  total flux cleaned = 0.00120425 Jy
! Component: 1900  -  total flux cleaned = 0.00120428 Jy
! Component: 1950  -  total flux cleaned = 0.0012312 Jy
! Component: 2000  -  total flux cleaned = 0.00120465 Jy
! Total flux subtracted in 2048 components = 0.00120437 Jy
! Clean residual min=-0.001772 max=0.001798 Jy/beam
! Clean residual mean=-0.000004 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.16857 Jy
keep
! Adding 180 model components to the UV plane model.
! The established model now contains 252 components and 0.16857 Jy
![Exited script file: muppet]
wmap "J0819-0630_S_2005_06_01_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.157 x 7.985 at -4.761 degrees (North through East)
! Clean map  min=-0.0032868  max=0.11778 Jy/beam
! Writing clean map to FITS file: J0819-0630_S_2005_06_01_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.117782 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000552945 
device "J0819-0630_S_2005_06_01_yyk\_map.eps/VPS"
! Attempting to open device: 'J0819-0630_S_2005_06_01_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.40839 1.40839 2.81679 5.63358 11.2672 22.5343 45.0686 90.1372
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0016 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.117 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.157 x 7.985 at -4.761 degrees (North through East)
! Clean map  min=-0.0032868  max=0.11778 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0819-0630_S_2005_06_01_yyk\_map.gif/gif"
! Attempting to open device: 'J0819-0630_S_2005_06_01_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0819-0630_S_2005_06_01_yyk_uvs.log closed on Sat Oct  8 17:09:40 2005