! Started logfile: J0817-2936_S_2005_05_12_yyk_uvs.log on Sat Oct 8 17:09:26 2005 obs J0817-2936_S_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J0817-2936_S_2005_05_12_yyk_uve.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.712698 visibilities/baseline/integration-bin. ! Found source: J0817-2936 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1443 lines of history. ! ! Reading 1796 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0817-2936_S_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.483642 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.618 mas, bmaj=7.188 mas, bpa=3.374 degrees ! Estimated noise=2.0308 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.347297 Jy ! Component: 100 - total flux cleaned = 0.454721 Jy ! Total flux subtracted in 100 components = 0.454721 Jy ! Clean residual min=-0.019528 max=0.033519 Jy/beam ! Clean residual mean=-0.000351 rms=0.006710 Jy/beam ! Combined flux in latest and established models = 0.454721 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.454721 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.144247Jy sigma=2.132962 ! Fit after self-cal, rms=0.143986Jy sigma=2.128439 ! Inverting map and beam ! Estimated beam: bmin=2.618 mas, bmaj=7.188 mas, bpa=3.374 degrees ! Estimated noise=2.0308 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.915 mas, bmaj=10.34 mas, bpa=-0.2333 degrees ! Estimated noise=1.05569 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0555756 Jy ! Component: 100 - total flux cleaned = 0.0709068 Jy ! Component: 150 - total flux cleaned = 0.0757555 Jy ! Component: 200 - total flux cleaned = 0.0759977 Jy ! Total flux subtracted in 200 components = 0.0759977 Jy ! Clean residual min=-0.023509 max=0.015323 Jy/beam ! Clean residual mean=-0.002154 rms=0.006378 Jy/beam ! Combined flux in latest and established models = 0.530719 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 45 components and 0.530719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124242Jy sigma=1.838173 ! Fit after self-cal, rms=0.124240Jy sigma=1.837975 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.915 x 10.34 at -0.2333 degrees (North through East) ! Clean map min=-0.02306 max=0.43073 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01818 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.91 HN 1.00* KP 0.88 ! LA 1.23 MK 0.96 NL 1.04 OV 0.91 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.999476 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 1.00* KP 0.94 ! LA 1.18 MK 1.00 NL 1.08 OV 0.96 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.957178 ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.11 HN 1.00* KP 0.88 ! LA 1.10 MK 1.09 NL 1.14 OV 0.96 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02574 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.00* KP 0.82 ! LA 1.27 MK 1.01 NL 1.04 OV 0.81 ! PT 0.85 SC 1.02 ! ! ! Fit before self-cal, rms=0.124240Jy sigma=1.837975 ! Fit after self-cal, rms=0.100342Jy sigma=1.360781 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100342Jy sigma=1.360781 ! Fit after self-cal, rms=0.100345Jy sigma=1.360673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.989 mas, bmaj=10.47 mas, bpa=0.5482 degrees ! Estimated noise=1.04403 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00203893 Jy ! Component: 100 - total flux cleaned = -0.0021488 Jy ! Component: 150 - total flux cleaned = -0.00216144 Jy ! Component: 200 - total flux cleaned = -0.00216944 Jy ! Total flux subtracted in 200 components = -0.00216944 Jy ! Clean residual min=-0.006884 max=0.011561 Jy/beam ! Clean residual mean=-0.000113 rms=0.002509 Jy/beam ! Combined flux in latest and established models = 0.52855 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.528549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100332Jy sigma=1.357888 ! Fit after self-cal, rms=0.100275Jy sigma=1.357548 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100275Jy sigma=1.357548 ! Fit after self-cal, rms=0.095868Jy sigma=1.297262 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-29.5, 59). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00539034 Jy ! Component: 100 - total flux cleaned = 0.00514256 Jy ! Component: 150 - total flux cleaned = 0.00454635 Jy ! Component: 200 - total flux cleaned = 0.00472885 Jy ! Total flux subtracted in 200 components = 0.00472885 Jy ! Clean residual min=-0.006766 max=0.008632 Jy/beam ! Clean residual mean=-0.000166 rms=0.002111 Jy/beam ! Combined flux in latest and established models = 0.533278 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 80 components and 0.533278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094306Jy sigma=1.264182 ! Fit after self-cal, rms=0.093879Jy sigma=1.247696 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.989 x 10.47 at 0.5482 degrees (North through East) ! Clean map min=-0.010778 max=0.43499 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093879Jy sigma=1.247696 ! Fit after self-cal, rms=0.086287Jy sigma=1.068193 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086287Jy sigma=1.068193 ! Fit after self-cal, rms=0.086439Jy sigma=1.063570 ! Inverting map and beam ! Estimated beam: bmin=3.936 mas, bmaj=10.37 mas, bpa=0.9627 degrees ! Estimated noise=1.03525 mJy/beam. ! Added new window around map position (-7, -7). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00655652 Jy ! Component: 100 - total flux cleaned = 0.0058478 Jy ! Component: 150 - total flux cleaned = 0.0054402 Jy ! Component: 200 - total flux cleaned = 0.00475733 Jy ! Total flux subtracted in 200 components = 0.00475733 Jy ! Clean residual min=-0.004054 max=0.005230 Jy/beam ! Clean residual mean=-0.000098 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.538036 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 100 components and 0.538035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084879Jy sigma=1.035804 ! Fit after self-cal, rms=0.084874Jy sigma=1.030707 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084874Jy sigma=1.030707 ! Fit after self-cal, rms=0.084936Jy sigma=0.984266 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084936Jy sigma=0.984266 ! Fit after self-cal, rms=0.085047Jy sigma=0.983351 ! Inverting map and beam ! Estimated beam: bmin=3.859 mas, bmaj=10.22 mas, bpa=1.592 degrees ! Estimated noise=1.03263 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288816 Jy ! Component: 100 - total flux cleaned = 0.00241833 Jy ! Component: 150 - total flux cleaned = 0.00227849 Jy ! Component: 200 - total flux cleaned = 0.00215914 Jy ! Total flux subtracted in 200 components = 0.00215914 Jy ! Clean residual min=-0.003783 max=0.004829 Jy/beam ! Clean residual mean=-0.000083 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 0.540195 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 117 components and 0.540195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084526Jy sigma=0.971438 ! Fit after self-cal, rms=0.084509Jy sigma=0.969526 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.648 mas, bmaj=29.41 mas, bpa=14.81 degrees ! Estimated noise=1.18513 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000857934 Jy ! Component: 100 - total flux cleaned = 0.00072327 Jy ! Component: 150 - total flux cleaned = 0.000603101 Jy ! Component: 200 - total flux cleaned = 0.000545913 Jy ! Total flux subtracted in 200 components = 0.000545913 Jy ! Clean residual min=-0.003692 max=0.003436 Jy/beam ! Clean residual mean=-0.000136 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.54074 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 138 components and 0.54074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084477Jy sigma=0.967497 ! Fit after self-cal, rms=0.084446Jy sigma=0.966889 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.601 mas, bmaj=7.19 mas, bpa=4.617 degrees ! Estimated noise=1.97886 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.340308 Jy ! Component: 100 - total flux cleaned = 0.444455 Jy ! Component: 150 - total flux cleaned = 0.490827 Jy ! Component: 200 - total flux cleaned = 0.5153 Jy ! Total flux subtracted in 200 components = 0.5153 Jy ! Clean residual min=-0.008119 max=0.010922 Jy/beam ! Clean residual mean=-0.000009 rms=0.002686 Jy/beam ! Combined flux in latest and established models = 0.5153 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.5153 Jy ! Inverting map and beam ! Estimated beam: bmin=3.859 mas, bmaj=10.22 mas, bpa=1.592 degrees ! Estimated noise=1.03263 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169263 Jy ! Component: 100 - total flux cleaned = 0.0234716 Jy ! Component: 150 - total flux cleaned = 0.0240957 Jy ! Component: 200 - total flux cleaned = 0.0240957 Jy ! Total flux subtracted in 200 components = 0.0240957 Jy ! Clean residual min=-0.004193 max=0.005331 Jy/beam ! Clean residual mean=-0.000070 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 0.539396 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 70 components and 0.539396 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.648 mas, bmaj=29.41 mas, bpa=14.81 degrees ! Estimated noise=1.18513 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000752741 Jy ! Component: 100 - total flux cleaned = 0.000870618 Jy ! Component: 150 - total flux cleaned = 0.000873688 Jy ! Component: 200 - total flux cleaned = 0.000785914 Jy ! Total flux subtracted in 200 components = 0.000785914 Jy ! Clean residual min=-0.003704 max=0.003932 Jy/beam ! Clean residual mean=-0.000113 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 0.540182 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 108 components and 0.540182 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.859 mas, bmaj=10.22 mas, bpa=1.592 degrees ! Estimated noise=1.03263 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.8259e-05 Jy ! Component: 100 - total flux cleaned = -4.98771e-05 Jy ! Component: 150 - total flux cleaned = -4.27532e-05 Jy ! Component: 200 - total flux cleaned = -3.7487e-05 Jy ! Total flux subtracted in 200 components = -3.7487e-05 Jy ! Clean residual min=-0.003988 max=0.004721 Jy/beam ! Clean residual mean=-0.000072 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.540144 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 126 components and 0.540144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083574Jy sigma=0.959651 ! Fit after self-cal, rms=0.083605Jy sigma=0.957213 wmodel J0817-2936_S_2005_05_12_yyk\_map.mod ! Writing 126 model components to file: J0817-2936_S_2005_05_12_yyk_map.mod wobs J0817-2936_S_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J0817-2936_S_2005_05_12_yyk_uvs.fits wwins J0817-2936_S_2005_05_12_yyk\_map.win ! wwins: Wrote 3 windows to J0817-2936_S_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117571 Jy ! Component: 100 - total flux cleaned = 0.0017086 Jy ! Component: 150 - total flux cleaned = 0.00194419 Jy ! Component: 200 - total flux cleaned = 0.00178251 Jy ! Component: 250 - total flux cleaned = 0.00142096 Jy ! Component: 300 - total flux cleaned = 0.00112409 Jy ! Component: 350 - total flux cleaned = 0.00074545 Jy ! Component: 400 - total flux cleaned = 0.00056351 Jy ! Component: 450 - total flux cleaned = 0.000476035 Jy ! Component: 500 - total flux cleaned = 0.000433895 Jy ! Component: 550 - total flux cleaned = 0.000227734 Jy ! Component: 600 - total flux cleaned = 2.70329e-05 Jy ! Component: 650 - total flux cleaned = -0.000205922 Jy ! Component: 700 - total flux cleaned = -0.000469985 Jy ! Component: 750 - total flux cleaned = -0.000653448 Jy ! Component: 800 - total flux cleaned = -0.000941448 Jy ! Component: 850 - total flux cleaned = -0.00118816 Jy ! Component: 900 - total flux cleaned = -0.00139528 Jy ! Component: 950 - total flux cleaned = -0.00159713 Jy ! Component: 1000 - total flux cleaned = -0.00166264 Jy ! Component: 1050 - total flux cleaned = -0.00179268 Jy ! Component: 1100 - total flux cleaned = -0.00195183 Jy ! Component: 1150 - total flux cleaned = -0.00207655 Jy ! Component: 1200 - total flux cleaned = -0.00222903 Jy ! Component: 1250 - total flux cleaned = -0.00237867 Jy ! Component: 1300 - total flux cleaned = -0.00255484 Jy ! Component: 1350 - total flux cleaned = -0.00275738 Jy ! Component: 1400 - total flux cleaned = -0.00287117 Jy ! Component: 1450 - total flux cleaned = -0.00309562 Jy ! Component: 1500 - total flux cleaned = -0.00320598 Jy ! Component: 1550 - total flux cleaned = -0.00326069 Jy ! Component: 1600 - total flux cleaned = -0.00336894 Jy ! Component: 1650 - total flux cleaned = -0.0033957 Jy ! Component: 1700 - total flux cleaned = -0.00347425 Jy ! Component: 1750 - total flux cleaned = -0.00352619 Jy ! Component: 1800 - total flux cleaned = -0.00355208 Jy ! Component: 1850 - total flux cleaned = -0.00365374 Jy ! Component: 1900 - total flux cleaned = -0.00375431 Jy ! Component: 1950 - total flux cleaned = -0.00377928 Jy ! Component: 2000 - total flux cleaned = -0.00387734 Jy ! Total flux subtracted in 2048 components = -0.00397448 Jy ! Clean residual min=-0.001435 max=0.001436 Jy/beam ! Clean residual mean=-0.000074 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.53617 Jy keep ! Adding 122 model components to the UV plane model. ! The established model now contains 248 components and 0.53617 Jy ![Exited script file: muppet] wmap "J0817-2936_S_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.859 x 10.22 at 1.592 degrees (North through East) ! Clean map min=-0.004537 max=0.41717 Jy/beam ! Writing clean map to FITS file: J0817-2936_S_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.417174 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000493303 device "J0817-2936_S_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0817-2936_S_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.354746 0.354746 0.709492 1.41898 2.83797 5.67594 11.3519 22.7037 45.4075 90.815 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.417 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.859 x 10.22 at 1.592 degrees (North through East) ! Clean map min=-0.004537 max=0.41717 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0817-2936_S_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0817-2936_S_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0817-2936_S_2005_05_12_yyk_uvs.log closed on Sat Oct 8 17:09:31 2005