! Started logfile: J0750-0706_S_2005_05_12_yyk_uvs.log on Sat Oct 8 17:08:23 2005 obs J0750-0706_S_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J0750-0706_S_2005_05_12_yyk_uve.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.9 visibilities/baseline/integration-bin. ! Found source: J0750-0706 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1443 lines of history. ! ! Reading 1944 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0750-0706_S_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.182609 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.646 mas, bmaj=7.452 mas, bpa=-7.815 degrees ! Estimated noise=1.27714 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.135064 Jy ! Component: 100 - total flux cleaned = 0.162965 Jy ! Total flux subtracted in 100 components = 0.162965 Jy ! Clean residual min=-0.006562 max=0.008586 Jy/beam ! Clean residual mean=0.000219 rms=0.002007 Jy/beam ! Combined flux in latest and established models = 0.162965 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.162965 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.076234Jy sigma=1.167130 ! Fit after self-cal, rms=0.076115Jy sigma=1.163625 ! Inverting map and beam ! Estimated beam: bmin=2.646 mas, bmaj=7.452 mas, bpa=-7.815 degrees ! Estimated noise=1.27714 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.298 mas, bmaj=8.966 mas, bpa=-7.026 degrees ! Estimated noise=0.864081 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137257 Jy ! Component: 100 - total flux cleaned = 0.0196079 Jy ! Component: 150 - total flux cleaned = 0.0226021 Jy ! Component: 200 - total flux cleaned = 0.0237151 Jy ! Total flux subtracted in 200 components = 0.0237151 Jy ! Clean residual min=-0.005958 max=0.010145 Jy/beam ! Clean residual mean=0.000301 rms=0.002133 Jy/beam ! Combined flux in latest and established models = 0.18668 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 43 components and 0.18668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074047Jy sigma=1.126141 ! Fit after self-cal, rms=0.073996Jy sigma=1.125644 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.298 x 8.966 at -7.026 degrees (North through East) ! Clean map min=-0.0057043 max=0.15824 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.03829 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.96 HN 0.96 KP 0.98 ! LA 0.96 MK 0.94 NL 0.96 OV 1.00 ! PT 1.02 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00168 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 1.10 KP 1.05 ! LA 0.92 MK 0.97 NL 0.99 OV 1.01 ! PT 1.03 SC 0.90 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02526 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.09 HN 0.91 KP 0.91 ! LA 0.97 MK 1.10 NL 0.97 OV 0.87 ! PT 0.91 SC 1.08 ! ! ! Fit before self-cal, rms=0.073996Jy sigma=1.125644 ! Fit after self-cal, rms=0.072643Jy sigma=1.107497 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072643Jy sigma=1.107497 ! Fit after self-cal, rms=0.072636Jy sigma=1.107363 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.328 mas, bmaj=8.901 mas, bpa=-6.622 degrees ! Estimated noise=0.865591 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10, 4.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126847 Jy ! Component: 100 - total flux cleaned = 0.0182799 Jy ! Component: 150 - total flux cleaned = 0.0201833 Jy ! Component: 200 - total flux cleaned = 0.0210557 Jy ! Total flux subtracted in 200 components = 0.0210557 Jy ! Clean residual min=-0.004181 max=0.004947 Jy/beam ! Clean residual mean=0.000157 rms=0.001334 Jy/beam ! Combined flux in latest and established models = 0.207736 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 82 components and 0.207736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071061Jy sigma=1.072773 ! Fit after self-cal, rms=0.070942Jy sigma=1.071266 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070942Jy sigma=1.071266 ! Fit after self-cal, rms=0.068628Jy sigma=1.027187 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289023 Jy ! Component: 100 - total flux cleaned = 0.00360443 Jy ! Component: 150 - total flux cleaned = 0.00414993 Jy ! Component: 200 - total flux cleaned = 0.0046315 Jy ! Total flux subtracted in 200 components = 0.0046315 Jy ! Clean residual min=-0.004286 max=0.004424 Jy/beam ! Clean residual mean=0.000135 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.212367 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 104 components and 0.212367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068446Jy sigma=1.023889 ! Fit after self-cal, rms=0.068447Jy sigma=1.020376 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.328 x 8.901 at -6.622 degrees (North through East) ! Clean map min=-0.004069 max=0.1609 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068447Jy sigma=1.020376 ! Fit after self-cal, rms=0.065626Jy sigma=0.997313 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065626Jy sigma=0.997313 ! Fit after self-cal, rms=0.065705Jy sigma=0.996869 ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=8.83 mas, bpa=-6.238 degrees ! Estimated noise=0.844854 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120523 Jy ! Component: 100 - total flux cleaned = -0.00122073 Jy ! Component: 150 - total flux cleaned = -0.00116301 Jy ! Component: 200 - total flux cleaned = -0.00105906 Jy ! Total flux subtracted in 200 components = -0.00105906 Jy ! Clean residual min=-0.004169 max=0.003765 Jy/beam ! Clean residual mean=0.000121 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.211308 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 118 components and 0.211308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065629Jy sigma=0.994065 ! Fit after self-cal, rms=0.065664Jy sigma=0.993934 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065664Jy sigma=0.993934 ! Fit after self-cal, rms=0.064842Jy sigma=0.988489 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064842Jy sigma=0.988489 ! Fit after self-cal, rms=0.064866Jy sigma=0.988439 ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=8.815 mas, bpa=-6.248 degrees ! Estimated noise=0.834051 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00217803 Jy ! Component: 100 - total flux cleaned = -0.00223472 Jy ! Component: 150 - total flux cleaned = -0.00223582 Jy ! Component: 200 - total flux cleaned = -0.0022362 Jy ! Total flux subtracted in 200 components = -0.0022362 Jy ! Clean residual min=-0.004224 max=0.003452 Jy/beam ! Clean residual mean=0.000098 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.209072 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 124 components and 0.209072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064834Jy sigma=0.986665 ! Fit after self-cal, rms=0.064842Jy sigma=0.986620 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.925 mas, bmaj=14.31 mas, bpa=5.882 degrees ! Estimated noise=1.03218 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134669 Jy ! Component: 100 - total flux cleaned = 0.00150295 Jy ! Component: 150 - total flux cleaned = 0.00155669 Jy ! Component: 200 - total flux cleaned = 0.00160473 Jy ! Total flux subtracted in 200 components = 0.00160473 Jy ! Clean residual min=-0.004866 max=0.004283 Jy/beam ! Clean residual mean=0.000166 rms=0.001612 Jy/beam ! Combined flux in latest and established models = 0.210677 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 138 components and 0.210677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064855Jy sigma=0.986649 ! Fit after self-cal, rms=0.064855Jy sigma=0.986616 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.654 mas, bmaj=7.369 mas, bpa=-7.374 degrees ! Estimated noise=1.22134 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.130109 Jy ! Component: 100 - total flux cleaned = 0.156987 Jy ! Component: 150 - total flux cleaned = 0.169637 Jy ! Component: 200 - total flux cleaned = 0.178662 Jy ! Total flux subtracted in 200 components = 0.178662 Jy ! Clean residual min=-0.004768 max=0.005158 Jy/beam ! Clean residual mean=0.000130 rms=0.001406 Jy/beam ! Combined flux in latest and established models = 0.178662 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.178662 Jy ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=8.815 mas, bpa=-6.248 degrees ! Estimated noise=0.834051 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00988055 Jy ! Component: 100 - total flux cleaned = 0.0163111 Jy ! Component: 150 - total flux cleaned = 0.0208238 Jy ! Component: 200 - total flux cleaned = 0.0235325 Jy ! Total flux subtracted in 200 components = 0.0235325 Jy ! Clean residual min=-0.004140 max=0.003804 Jy/beam ! Clean residual mean=0.000137 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 0.202194 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 89 components and 0.202194 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.925 mas, bmaj=14.31 mas, bpa=5.882 degrees ! Estimated noise=1.03218 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043089 Jy ! Component: 100 - total flux cleaned = 0.00611261 Jy ! Component: 150 - total flux cleaned = 0.00704294 Jy ! Component: 200 - total flux cleaned = 0.00766741 Jy ! Total flux subtracted in 200 components = 0.00766741 Jy ! Clean residual min=-0.004873 max=0.004487 Jy/beam ! Clean residual mean=0.000173 rms=0.001613 Jy/beam ! Combined flux in latest and established models = 0.209862 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 111 components and 0.209862 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=8.815 mas, bpa=-6.248 degrees ! Estimated noise=0.834051 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00036469 Jy ! Component: 100 - total flux cleaned = -0.000359419 Jy ! Component: 150 - total flux cleaned = -0.000421718 Jy ! Component: 200 - total flux cleaned = -0.000366528 Jy ! Total flux subtracted in 200 components = -0.000366528 Jy ! Clean residual min=-0.004194 max=0.003600 Jy/beam ! Clean residual mean=0.000094 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.209495 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 129 components and 0.209495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064897Jy sigma=0.987722 ! Fit after self-cal, rms=0.064897Jy sigma=0.987645 wmodel J0750-0706_S_2005_05_12_yyk\_map.mod ! Writing 129 model components to file: J0750-0706_S_2005_05_12_yyk_map.mod wobs J0750-0706_S_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J0750-0706_S_2005_05_12_yyk_uvs.fits wwins J0750-0706_S_2005_05_12_yyk\_map.win ! wwins: Wrote 2 windows to J0750-0706_S_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119438 Jy ! Component: 100 - total flux cleaned = -0.00120028 Jy ! Component: 150 - total flux cleaned = -0.00108452 Jy ! Component: 200 - total flux cleaned = -0.00086356 Jy ! Component: 250 - total flux cleaned = -0.000548175 Jy ! Component: 300 - total flux cleaned = -0.000197502 Jy ! Component: 350 - total flux cleaned = -5.38814e-05 Jy ! Component: 400 - total flux cleaned = 0.000130963 Jy ! Component: 450 - total flux cleaned = 0.000129953 Jy ! Component: 500 - total flux cleaned = 0.00021677 Jy ! Component: 550 - total flux cleaned = 0.000174736 Jy ! Component: 600 - total flux cleaned = 0.000215444 Jy ! Component: 650 - total flux cleaned = 0.000174453 Jy ! Component: 700 - total flux cleaned = 9.60154e-05 Jy ! Component: 750 - total flux cleaned = -5.59308e-05 Jy ! Component: 800 - total flux cleaned = -0.000167551 Jy ! Component: 850 - total flux cleaned = -0.000422413 Jy ! Component: 900 - total flux cleaned = -0.000707882 Jy ! Component: 950 - total flux cleaned = -0.00105798 Jy ! Component: 1000 - total flux cleaned = -0.0013323 Jy ! Component: 1050 - total flux cleaned = -0.00163516 Jy ! Component: 1100 - total flux cleaned = -0.00186672 Jy ! Component: 1150 - total flux cleaned = -0.00212698 Jy ! Component: 1200 - total flux cleaned = -0.00244694 Jy ! Component: 1250 - total flux cleaned = -0.00279242 Jy ! Component: 1300 - total flux cleaned = -0.00310144 Jy ! Component: 1350 - total flux cleaned = -0.0034054 Jy ! Component: 1400 - total flux cleaned = -0.00352568 Jy ! Component: 1450 - total flux cleaned = -0.00376296 Jy ! Component: 1500 - total flux cleaned = -0.00402568 Jy ! Component: 1550 - total flux cleaned = -0.00419866 Jy ! Component: 1600 - total flux cleaned = -0.00448236 Jy ! Component: 1650 - total flux cleaned = -0.00459416 Jy ! Component: 1700 - total flux cleaned = -0.00481504 Jy ! Component: 1750 - total flux cleaned = -0.00500574 Jy ! Component: 1800 - total flux cleaned = -0.00519362 Jy ! Component: 1850 - total flux cleaned = -0.00537946 Jy ! Component: 1900 - total flux cleaned = -0.00553696 Jy ! Component: 1950 - total flux cleaned = -0.00571837 Jy ! Component: 2000 - total flux cleaned = -0.00587176 Jy ! Total flux subtracted in 2048 components = -0.0059477 Jy ! Clean residual min=-0.001554 max=0.001724 Jy/beam ! Clean residual mean=0.000007 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.203548 Jy keep ! Adding 158 model components to the UV plane model. ! The established model now contains 287 components and 0.203548 Jy ![Exited script file: muppet] wmap "J0750-0706_S_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.308 x 8.815 at -6.248 degrees (North through East) ! Clean map min=-0.0036029 max=0.15662 Jy/beam ! Writing clean map to FITS file: J0750-0706_S_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.156616 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000539381 device "J0750-0706_S_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0750-0706_S_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03319 1.03319 2.06639 4.13278 8.26555 16.5311 33.0622 66.1244 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.156 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.308 x 8.815 at -6.248 degrees (North through East) ! Clean map min=-0.0036029 max=0.15662 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0750-0706_S_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0750-0706_S_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0750-0706_S_2005_05_12_yyk_uvs.log closed on Sat Oct 8 17:08:28 2005