! Started logfile: J0725-2640_X_2005_05_12_yyk_uvs.log on Sat Oct 8 17:07:13 2005 obs J0725-2640_X_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J0725-2640_X_2005_05_12_yyk_uve.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.92 visibilities/baseline/integration-bin. ! Found source: J0725-2640 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1438 lines of history. ! ! Reading 2484 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0725-2640_X_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.335698 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6897 mas, bmaj=2.037 mas, bpa=13.23 degrees ! Estimated noise=1.45503 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.266814 Jy ! Component: 100 - total flux cleaned = 0.322555 Jy ! Total flux subtracted in 100 components = 0.322555 Jy ! Clean residual min=-0.012222 max=0.016663 Jy/beam ! Clean residual mean=0.000012 rms=0.002979 Jy/beam ! Combined flux in latest and established models = 0.322555 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.322555 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.081947Jy sigma=1.259640 ! Fit after self-cal, rms=0.081817Jy sigma=1.256900 ! Inverting map and beam ! Estimated beam: bmin=0.6897 mas, bmaj=2.037 mas, bpa=13.23 degrees ! Estimated noise=1.45503 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9743 mas, bmaj=2.642 mas, bpa=12.03 degrees ! Estimated noise=0.894878 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0276654 Jy ! Component: 100 - total flux cleaned = 0.0350794 Jy ! Component: 150 - total flux cleaned = 0.0366027 Jy ! Component: 200 - total flux cleaned = 0.0367688 Jy ! Total flux subtracted in 200 components = 0.0367688 Jy ! Clean residual min=-0.010220 max=0.010953 Jy/beam ! Clean residual mean=0.000081 rms=0.002767 Jy/beam ! Combined flux in latest and established models = 0.359324 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.359324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075819Jy sigma=1.132805 ! Fit after self-cal, rms=0.075821Jy sigma=1.132752 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9743 x 2.642 at 12.03 degrees (North through East) ! Clean map min=-0.0099348 max=0.32497 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01176 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.94 HN 1.00* KP 0.93 ! LA 1.13 MK 0.94 NL 1.05 OV 1.00 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00873 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.95 HN 1.00* KP 0.89 ! LA 1.13 MK 1.00 NL 1.03 OV 1.00 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.997258 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.00* KP 0.85 ! LA 1.10 MK 1.03 NL 1.02 OV 1.03 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.978757 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.00* KP 0.95 ! LA 1.06 MK 1.01 NL 1.05 OV 1.06 ! PT 1.07 SC 0.99 ! ! ! Fit before self-cal, rms=0.075821Jy sigma=1.132752 ! Fit after self-cal, rms=0.070530Jy sigma=1.011781 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070530Jy sigma=1.011781 ! Fit after self-cal, rms=0.070541Jy sigma=1.011748 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9733 mas, bmaj=2.646 mas, bpa=12.11 degrees ! Estimated noise=0.891569 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000500485 Jy ! Component: 100 - total flux cleaned = 0.000582128 Jy ! Component: 150 - total flux cleaned = 0.000606661 Jy ! Component: 200 - total flux cleaned = 0.000649535 Jy ! Total flux subtracted in 200 components = 0.000649535 Jy ! Clean residual min=-0.003795 max=0.004401 Jy/beam ! Clean residual mean=0.000019 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.359973 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 30 components and 0.359973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070512Jy sigma=1.011444 ! Fit after self-cal, rms=0.070515Jy sigma=1.011432 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070515Jy sigma=1.011432 ! Fit after self-cal, rms=0.068069Jy sigma=0.968743 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-22.6, -4.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296713 Jy ! Component: 100 - total flux cleaned = 0.00281738 Jy ! Component: 150 - total flux cleaned = 0.00268802 Jy ! Component: 200 - total flux cleaned = 0.00268537 Jy ! Total flux subtracted in 200 components = 0.00268537 Jy ! Clean residual min=-0.003642 max=0.003540 Jy/beam ! Clean residual mean=0.000013 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.362658 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 0.362658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067894Jy sigma=0.964004 ! Fit after self-cal, rms=0.067716Jy sigma=0.960941 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9733 x 2.646 at 12.11 degrees (North through East) ! Clean map min=-0.0034137 max=0.32513 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067716Jy sigma=0.960941 ! Fit after self-cal, rms=0.067540Jy sigma=0.943604 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067540Jy sigma=0.943604 ! Fit after self-cal, rms=0.067530Jy sigma=0.943294 ! Inverting map and beam ! Estimated beam: bmin=0.9744 mas, bmaj=2.651 mas, bpa=12.23 degrees ! Estimated noise=0.890041 mJy/beam. ! Added new window around map position (-2.2, -2.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00320107 Jy ! Component: 100 - total flux cleaned = 0.0031423 Jy ! Component: 150 - total flux cleaned = 0.00319548 Jy ! Component: 200 - total flux cleaned = 0.00319389 Jy ! Total flux subtracted in 200 components = 0.00319389 Jy ! Clean residual min=-0.002889 max=0.002923 Jy/beam ! Clean residual mean=0.000002 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.365852 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 63 components and 0.365852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067341Jy sigma=0.939668 ! Fit after self-cal, rms=0.067323Jy sigma=0.939254 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067323Jy sigma=0.939254 ! Fit after self-cal, rms=0.066186Jy sigma=0.915480 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066186Jy sigma=0.915480 ! Fit after self-cal, rms=0.066189Jy sigma=0.915451 ! Inverting map and beam ! Estimated beam: bmin=0.9733 mas, bmaj=2.651 mas, bpa=12.29 degrees ! Estimated noise=0.890774 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140047 Jy ! Component: 100 - total flux cleaned = 0.00153664 Jy ! Component: 150 - total flux cleaned = 0.00157634 Jy ! Component: 200 - total flux cleaned = 0.00164478 Jy ! Total flux subtracted in 200 components = 0.00164478 Jy ! Clean residual min=-0.002715 max=0.002794 Jy/beam ! Clean residual mean=0.000002 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.367497 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 71 components and 0.367497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066122Jy sigma=0.914334 ! Fit after self-cal, rms=0.066123Jy sigma=0.914230 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.605 mas, bmaj=7.236 mas, bpa=12.49 degrees ! Estimated noise=1.06642 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00010574 Jy ! Component: 100 - total flux cleaned = -1.72669e-05 Jy ! Component: 150 - total flux cleaned = 6.06103e-05 Jy ! Component: 200 - total flux cleaned = 0.000148755 Jy ! Total flux subtracted in 200 components = 0.000148755 Jy ! Clean residual min=-0.002464 max=0.002411 Jy/beam ! Clean residual mean=0.000004 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.367646 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 80 components and 0.367646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066119Jy sigma=0.914173 ! Fit after self-cal, rms=0.066120Jy sigma=0.914119 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6897 mas, bmaj=2.043 mas, bpa=13.44 degrees ! Estimated noise=1.4482 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.265686 Jy ! Component: 100 - total flux cleaned = 0.321312 Jy ! Component: 150 - total flux cleaned = 0.343717 Jy ! Component: 200 - total flux cleaned = 0.354755 Jy ! Total flux subtracted in 200 components = 0.354755 Jy ! Clean residual min=-0.005780 max=0.005541 Jy/beam ! Clean residual mean=-0.000004 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 0.354755 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.354755 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9733 mas, bmaj=2.651 mas, bpa=12.29 degrees ! Estimated noise=0.890774 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00817592 Jy ! Component: 100 - total flux cleaned = 0.011299 Jy ! Component: 150 - total flux cleaned = 0.0125396 Jy ! Component: 200 - total flux cleaned = 0.0130381 Jy ! Total flux subtracted in 200 components = 0.0130381 Jy ! Clean residual min=-0.002922 max=0.002826 Jy/beam ! Clean residual mean=-0.000000 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.367793 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 46 components and 0.367793 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.605 mas, bmaj=7.236 mas, bpa=12.49 degrees ! Estimated noise=1.06642 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000690359 Jy ! Component: 100 - total flux cleaned = 0.000622577 Jy ! Component: 150 - total flux cleaned = 0.000688867 Jy ! Component: 200 - total flux cleaned = 0.000688432 Jy ! Total flux subtracted in 200 components = 0.000688432 Jy ! Clean residual min=-0.002420 max=0.002353 Jy/beam ! Clean residual mean=0.000006 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.368482 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 59 components and 0.368482 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9733 mas, bmaj=2.651 mas, bpa=12.29 degrees ! Estimated noise=0.890774 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102083 Jy ! Component: 100 - total flux cleaned = 9.97699e-05 Jy ! Component: 150 - total flux cleaned = 0.000146689 Jy ! Component: 200 - total flux cleaned = 0.000229931 Jy ! Total flux subtracted in 200 components = 0.000229931 Jy ! Clean residual min=-0.002753 max=0.002735 Jy/beam ! Clean residual mean=0.000002 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.368712 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 76 components and 0.368712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066161Jy sigma=0.914721 ! Fit after self-cal, rms=0.066152Jy sigma=0.914616 wmodel J0725-2640_X_2005_05_12_yyk\_map.mod ! Writing 76 model components to file: J0725-2640_X_2005_05_12_yyk_map.mod wobs J0725-2640_X_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J0725-2640_X_2005_05_12_yyk_uvs.fits wwins J0725-2640_X_2005_05_12_yyk\_map.win ! wwins: Wrote 3 windows to J0725-2640_X_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.01944e-06 Jy ! Component: 100 - total flux cleaned = 4.7821e-06 Jy ! Component: 150 - total flux cleaned = 0.000252486 Jy ! Component: 200 - total flux cleaned = 0.00056414 Jy ! Component: 250 - total flux cleaned = 0.000936394 Jy ! Component: 300 - total flux cleaned = 0.00114996 Jy ! Component: 350 - total flux cleaned = 0.00132175 Jy ! Component: 400 - total flux cleaned = 0.00142063 Jy ! Component: 450 - total flux cleaned = 0.00148408 Jy ! Component: 500 - total flux cleaned = 0.00142311 Jy ! Component: 550 - total flux cleaned = 0.00157246 Jy ! Component: 600 - total flux cleaned = 0.00162978 Jy ! Component: 650 - total flux cleaned = 0.00163014 Jy ! Component: 700 - total flux cleaned = 0.00182254 Jy ! Component: 750 - total flux cleaned = 0.0019026 Jy ! Component: 800 - total flux cleaned = 0.00198039 Jy ! Component: 850 - total flux cleaned = 0.00200626 Jy ! Component: 900 - total flux cleaned = 0.00208152 Jy ! Component: 950 - total flux cleaned = 0.00217945 Jy ! Component: 1000 - total flux cleaned = 0.00217966 Jy ! Component: 1050 - total flux cleaned = 0.00220363 Jy ! Component: 1100 - total flux cleaned = 0.00231834 Jy ! Component: 1150 - total flux cleaned = 0.00238571 Jy ! Component: 1200 - total flux cleaned = 0.00247432 Jy ! Component: 1250 - total flux cleaned = 0.00247402 Jy ! Component: 1300 - total flux cleaned = 0.00256013 Jy ! Component: 1350 - total flux cleaned = 0.00262367 Jy ! Component: 1400 - total flux cleaned = 0.00272801 Jy ! Component: 1450 - total flux cleaned = 0.00276949 Jy ! Component: 1500 - total flux cleaned = 0.0028103 Jy ! Component: 1550 - total flux cleaned = 0.00295075 Jy ! Component: 1600 - total flux cleaned = 0.00297028 Jy ! Component: 1650 - total flux cleaned = 0.00304842 Jy ! Component: 1700 - total flux cleaned = 0.00304823 Jy ! Component: 1750 - total flux cleaned = 0.00304823 Jy ! Component: 1800 - total flux cleaned = 0.0031049 Jy ! Component: 1850 - total flux cleaned = 0.00321709 Jy ! Component: 1900 - total flux cleaned = 0.00321726 Jy ! Component: 1950 - total flux cleaned = 0.00329043 Jy ! Component: 2000 - total flux cleaned = 0.00329029 Jy ! Total flux subtracted in 2048 components = 0.0033442 Jy ! Clean residual min=-0.000955 max=0.001423 Jy/beam ! Clean residual mean=-0.000001 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.372056 Jy keep ! Adding 115 model components to the UV plane model. ! The established model now contains 191 components and 0.372056 Jy ![Exited script file: muppet] wmap "J0725-2640_X_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9733 x 2.651 at 12.29 degrees (North through East) ! Clean map min=-0.0022913 max=0.32242 Jy/beam ! Writing clean map to FITS file: J0725-2640_X_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.322415 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000340389 device "J0725-2640_X_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0725-2640_X_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.316724 0.316724 0.633449 1.2669 2.53379 5.06759 10.1352 20.2704 40.5407 81.0814 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.322 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9733 x 2.651 at 12.29 degrees (North through East) ! Clean map min=-0.0022913 max=0.32242 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0725-2640_X_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0725-2640_X_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0725-2640_X_2005_05_12_yyk_uvs.log closed on Sat Oct 8 17:07:18 2005