! Started logfile: J0725-2640_S_2005_05_12_yyk_uvs.log on Sat Oct  8 17:07:09 2005
obs J0725-2640_S_2005_05_12_yyk_uve.fits
! Reading UV FITS file: J0725-2640_S_2005_05_12_yyk_uve.fits
! AN table 1: 15 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.92 visibilities/baseline/integration-bin.
! Found source: J0725-2640
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1443 lines of history.
! 
! Reading 2484 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0725-2640_S_2005_05_12_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.247476 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.831 mas, bmaj=7.234 mas, bpa=12.14 degrees
! Estimated noise=1.6564 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.171848 Jy
! Component: 100  -  total flux cleaned = 0.232012 Jy
! Total flux subtracted in 100 components = 0.232012 Jy
! Clean residual min=-0.010267 max=0.019255 Jy/beam
! Clean residual mean=0.000008 rms=0.003293 Jy/beam
! Combined flux in latest and established models = 0.232012 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.232012 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.091575Jy  sigma=1.270900
! Fit after  self-cal, rms=0.091084Jy  sigma=1.263035
! Inverting map and beam 
! Estimated beam: bmin=2.831 mas, bmaj=7.234 mas, bpa=12.14 degrees
! Estimated noise=1.6564 mJy/beam.
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0277638 Jy
! Component: 100  -  total flux cleaned = 0.041737 Jy
! Total flux subtracted in 100 components = 0.041737 Jy
! Clean residual min=-0.006643 max=0.006856 Jy/beam
! Clean residual mean=0.000005 rms=0.001873 Jy/beam
! Combined flux in latest and established models = 0.273749 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 42 components and 0.273749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081610Jy  sigma=1.092186
! Fit after  self-cal, rms=0.081620Jy  sigma=1.091850
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.919 mas, bmaj=9.792 mas, bpa=8.111 degrees
! Estimated noise=1.02322 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00805171 Jy
! Component: 100  -  total flux cleaned = 0.0106675 Jy
! Component: 150  -  total flux cleaned = 0.0116369 Jy
! Component: 200  -  total flux cleaned = 0.0117222 Jy
! Total flux subtracted in 200 components = 0.0117222 Jy
! Clean residual min=-0.005485 max=0.006319 Jy/beam
! Clean residual mean=-0.000088 rms=0.001985 Jy/beam
! Combined flux in latest and established models = 0.285471 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 64 components and 0.285471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080717Jy  sigma=1.082036
! Fit after  self-cal, rms=0.080719Jy  sigma=1.082017
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.919 x 9.792 at 8.111 degrees (North through East)
! Clean map  min=-0.0053508  max=0.21249 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.00801
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.97     HN        1.00*    KP        0.98     
!   LA        1.01     MK        0.97     NL        0.99     OV        0.97     
!   PT        1.07     SC        1.02     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.957905
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.09     HN        1.00*    KP        1.05     
!   LA        0.98     MK        1.04     NL        1.01     OV        0.98     
!   PT        1.02     SC        1.25     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.00206
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.19     HN        1.00*    KP        0.96     
!   LA        0.97     MK        1.06     NL        1.05     OV        0.98     
!   PT        1.03     SC        0.83     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.03473
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.00*    KP        0.87     
!   LA        1.08     MK        1.02     NL        0.94     OV        0.83     
!   PT        0.90     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.080719Jy  sigma=1.082017
! Fit after  self-cal, rms=0.076563Jy  sigma=1.023481
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076563Jy  sigma=1.023481
! Fit after  self-cal, rms=0.076568Jy  sigma=1.023446
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.923 mas, bmaj=9.834 mas, bpa=9.601 degrees
! Estimated noise=1.0177 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152606 Jy
! Component: 100  -  total flux cleaned = 0.00027708 Jy
! Component: 150  -  total flux cleaned = 0.000355821 Jy
! Component: 200  -  total flux cleaned = 0.000447058 Jy
! Total flux subtracted in 200 components = 0.000447058 Jy
! Clean residual min=-0.003416 max=0.005153 Jy/beam
! Clean residual mean=-0.000003 rms=0.001081 Jy/beam
! Combined flux in latest and established models = 0.285918 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 71 components and 0.285919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076560Jy  sigma=1.023151
! Fit after  self-cal, rms=0.076563Jy  sigma=1.023148
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076563Jy  sigma=1.023148
! Fit after  self-cal, rms=0.073409Jy  sigma=0.974082
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-33.5, -14.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00475075 Jy
! Component: 100  -  total flux cleaned = 0.00537546 Jy
! Component: 150  -  total flux cleaned = 0.00572981 Jy
! Component: 200  -  total flux cleaned = 0.00597553 Jy
! Total flux subtracted in 200 components = 0.00597553 Jy
! Clean residual min=-0.002941 max=0.002938 Jy/beam
! Clean residual mean=-0.000052 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.291894 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 95 components and 0.291894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073062Jy  sigma=0.969105
! Fit after  self-cal, rms=0.072893Jy  sigma=0.966120
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.923 x 9.834 at 9.601 degrees (North through East)
! Clean map  min=-0.0029108  max=0.21198 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072893Jy  sigma=0.966120
! Fit after  self-cal, rms=0.070599Jy  sigma=0.934501
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070599Jy  sigma=0.934501
! Fit after  self-cal, rms=0.070601Jy  sigma=0.934158
! Inverting map and beam 
! Estimated beam: bmin=3.86 mas, bmaj=9.779 mas, bpa=10.3 degrees
! Estimated noise=1.00796 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000534865 Jy
! Component: 100  -  total flux cleaned = 0.00053419 Jy
! Component: 150  -  total flux cleaned = 0.00049075 Jy
! Component: 200  -  total flux cleaned = 0.000452918 Jy
! Total flux subtracted in 200 components = 0.000452918 Jy
! Clean residual min=-0.002937 max=0.002862 Jy/beam
! Clean residual mean=-0.000048 rms=0.000803 Jy/beam
! Combined flux in latest and established models = 0.292347 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 116 components and 0.292347 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070537Jy  sigma=0.933343
! Fit after  self-cal, rms=0.070538Jy  sigma=0.933267
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070538Jy  sigma=0.933267
! Fit after  self-cal, rms=0.069372Jy  sigma=0.905737
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069372Jy  sigma=0.905737
! Fit after  self-cal, rms=0.069361Jy  sigma=0.905701
! Inverting map and beam 
! Estimated beam: bmin=3.869 mas, bmaj=9.785 mas, bpa=10.22 degrees
! Estimated noise=1.01003 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000699086 Jy
! Component: 100  -  total flux cleaned = 0.000899413 Jy
! Component: 150  -  total flux cleaned = 0.00100355 Jy
! Component: 200  -  total flux cleaned = 0.00100323 Jy
! Total flux subtracted in 200 components = 0.00100323 Jy
! Clean residual min=-0.002719 max=0.002617 Jy/beam
! Clean residual mean=-0.000049 rms=0.000789 Jy/beam
! Combined flux in latest and established models = 0.29335 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 130 components and 0.29335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069330Jy  sigma=0.905133
! Fit after  self-cal, rms=0.069322Jy  sigma=0.905119
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.187 mas, bmaj=25.25 mas, bpa=11.89 degrees
! Estimated noise=1.18414 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000352035 Jy
! Component: 100  -  total flux cleaned = 0.000387099 Jy
! Component: 150  -  total flux cleaned = 0.000414339 Jy
! Component: 200  -  total flux cleaned = 0.000439801 Jy
! Total flux subtracted in 200 components = 0.000439801 Jy
! Clean residual min=-0.002218 max=0.002126 Jy/beam
! Clean residual mean=-0.000089 rms=0.000852 Jy/beam
! Combined flux in latest and established models = 0.29379 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 139 components and 0.29379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069334Jy  sigma=0.905040
! Fit after  self-cal, rms=0.069331Jy  sigma=0.905006
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.814 mas, bmaj=7.265 mas, bpa=12.65 degrees
! Estimated noise=1.63275 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.171177 Jy
! Component: 100  -  total flux cleaned = 0.229908 Jy
! Component: 150  -  total flux cleaned = 0.256123 Jy
! Component: 200  -  total flux cleaned = 0.269302 Jy
! Total flux subtracted in 200 components = 0.269302 Jy
! Clean residual min=-0.005744 max=0.006085 Jy/beam
! Clean residual mean=0.000011 rms=0.001602 Jy/beam
! Combined flux in latest and established models = 0.269302 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 41 model components to the UV plane model.
! The established model now contains 41 components and 0.269302 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.869 mas, bmaj=9.785 mas, bpa=10.22 degrees
! Estimated noise=1.01003 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116154 Jy
! Component: 100  -  total flux cleaned = 0.0169959 Jy
! Component: 150  -  total flux cleaned = 0.0201788 Jy
! Component: 200  -  total flux cleaned = 0.0215475 Jy
! Total flux subtracted in 200 components = 0.0215475 Jy
! Clean residual min=-0.002837 max=0.003120 Jy/beam
! Clean residual mean=-0.000037 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.290849 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 80 components and 0.290849 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.187 mas, bmaj=25.25 mas, bpa=11.89 degrees
! Estimated noise=1.18414 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00221418 Jy
! Component: 100  -  total flux cleaned = 0.00240771 Jy
! Component: 150  -  total flux cleaned = 0.00244767 Jy
! Component: 200  -  total flux cleaned = 0.0024474 Jy
! Total flux subtracted in 200 components = 0.0024474 Jy
! Clean residual min=-0.002211 max=0.002442 Jy/beam
! Clean residual mean=-0.000082 rms=0.000858 Jy/beam
! Combined flux in latest and established models = 0.293297 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 101 components and 0.293297 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.869 mas, bmaj=9.785 mas, bpa=10.22 degrees
! Estimated noise=1.01003 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000279493 Jy
! Component: 100  -  total flux cleaned = 0.000218657 Jy
! Component: 150  -  total flux cleaned = 6.56903e-05 Jy
! Component: 200  -  total flux cleaned = -2.32317e-05 Jy
! Total flux subtracted in 200 components = -2.32317e-05 Jy
! Clean residual min=-0.002744 max=0.002785 Jy/beam
! Clean residual mean=-0.000049 rms=0.000794 Jy/beam
! Combined flux in latest and established models = 0.293273 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 123 components and 0.293273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069334Jy  sigma=0.905615
! Fit after  self-cal, rms=0.069340Jy  sigma=0.905541
wmodel J0725-2640_S_2005_05_12_yyk\_map.mod
! Writing 123 model components to file: J0725-2640_S_2005_05_12_yyk_map.mod
wobs J0725-2640_S_2005_05_12_yyk\_uvs.fits
! Writing UV FITS file: J0725-2640_S_2005_05_12_yyk_uvs.fits
wwins J0725-2640_S_2005_05_12_yyk\_map.win
! wwins: Wrote 2 windows to J0725-2640_S_2005_05_12_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 1.25314e-05 Jy
! Component: 100  -  total flux cleaned = -7.82439e-05 Jy
! Component: 150  -  total flux cleaned = -7.74373e-05 Jy
! Component: 200  -  total flux cleaned = 4.37691e-05 Jy
! Component: 250  -  total flux cleaned = 5.35268e-06 Jy
! Component: 300  -  total flux cleaned = 4.24676e-05 Jy
! Component: 350  -  total flux cleaned = -2.87539e-05 Jy
! Component: 400  -  total flux cleaned = -9.74749e-05 Jy
! Component: 450  -  total flux cleaned = -0.000198048 Jy
! Component: 500  -  total flux cleaned = -0.000329375 Jy
! Component: 550  -  total flux cleaned = -0.000585247 Jy
! Component: 600  -  total flux cleaned = -0.000864607 Jy
! Component: 650  -  total flux cleaned = -0.000985376 Jy
! Component: 700  -  total flux cleaned = -0.00119282 Jy
! Component: 750  -  total flux cleaned = -0.00139561 Jy
! Component: 800  -  total flux cleaned = -0.00159321 Jy
! Component: 850  -  total flux cleaned = -0.00178601 Jy
! Component: 900  -  total flux cleaned = -0.00192079 Jy
! Component: 950  -  total flux cleaned = -0.00210629 Jy
! Component: 1000  -  total flux cleaned = -0.00228806 Jy
! Component: 1050  -  total flux cleaned = -0.00246627 Jy
! Component: 1100  -  total flux cleaned = -0.00266571 Jy
! Component: 1150  -  total flux cleaned = -0.00288565 Jy
! Component: 1200  -  total flux cleaned = -0.00307756 Jy
! Component: 1250  -  total flux cleaned = -0.00326586 Jy
! Component: 1300  -  total flux cleaned = -0.00347356 Jy
! Component: 1350  -  total flux cleaned = -0.00360955 Jy
! Component: 1400  -  total flux cleaned = -0.00372139 Jy
! Component: 1450  -  total flux cleaned = -0.00387507 Jy
! Component: 1500  -  total flux cleaned = -0.0040263 Jy
! Component: 1550  -  total flux cleaned = -0.00415409 Jy
! Component: 1600  -  total flux cleaned = -0.00432151 Jy
! Component: 1650  -  total flux cleaned = -0.00442438 Jy
! Component: 1700  -  total flux cleaned = -0.00456626 Jy
! Component: 1750  -  total flux cleaned = -0.00468631 Jy
! Component: 1800  -  total flux cleaned = -0.00474538 Jy
! Component: 1850  -  total flux cleaned = -0.00484264 Jy
! Component: 1900  -  total flux cleaned = -0.00491941 Jy
! Component: 1950  -  total flux cleaned = -0.0049949 Jy
! Component: 2000  -  total flux cleaned = -0.00506982 Jy
! Total flux subtracted in 2048 components = -0.00516171 Jy
! Clean residual min=-0.001101 max=0.001087 Jy/beam
! Clean residual mean=-0.000031 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.288112 Jy
keep
! Adding 120 model components to the UV plane model.
! The established model now contains 243 components and 0.288112 Jy
![Exited script file: muppet]
wmap "J0725-2640_S_2005_05_12_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.869 x 9.785 at 10.22 degrees (North through East)
! Clean map  min=-0.0023242  max=0.21029 Jy/beam
! Writing clean map to FITS file: J0725-2640_S_2005_05_12_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.210285 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000369972 
device "J0725-2640_S_2005_05_12_yyk\_map.eps/VPS"
! Attempting to open device: 'J0725-2640_S_2005_05_12_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.527814 0.527814 1.05563 2.11126 4.22251 8.44502 16.89 33.7801 67.5602
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0011 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.21 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.869 x 9.785 at 10.22 degrees (North through East)
! Clean map  min=-0.0023242  max=0.21029 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0725-2640_S_2005_05_12_yyk\_map.gif/gif"
! Attempting to open device: 'J0725-2640_S_2005_05_12_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0725-2640_S_2005_05_12_yyk_uvs.log closed on Sat Oct  8 17:07:13 2005