! Started logfile: J0653-1929_X_2005_05_12_yyk_uvs.log on Sat Oct 8 17:06:05 2005 obs J0653-1929_X_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J0653-1929_X_2005_05_12_yyk_uve.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.755556 visibilities/baseline/integration-bin. ! Found source: J0653-1929 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1438 lines of history. ! ! Reading 1768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0653-1929_X_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.333725 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7431 mas, bmaj=2.037 mas, bpa=-8.041 degrees ! Estimated noise=1.34177 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.275673 Jy ! Component: 100 - total flux cleaned = 0.318159 Jy ! Total flux subtracted in 100 components = 0.318159 Jy ! Clean residual min=-0.007725 max=0.010517 Jy/beam ! Clean residual mean=0.000049 rms=0.002094 Jy/beam ! Combined flux in latest and established models = 0.318159 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.318159 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.073713Jy sigma=1.163424 ! Fit after self-cal, rms=0.073567Jy sigma=1.159463 ! Inverting map and beam ! Estimated beam: bmin=0.7431 mas, bmaj=2.037 mas, bpa=-8.041 degrees ! Estimated noise=1.34177 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9462 mas, bmaj=2.584 mas, bpa=-6.486 degrees ! Estimated noise=0.932274 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.017343 Jy ! Component: 100 - total flux cleaned = 0.0232584 Jy ! Component: 150 - total flux cleaned = 0.0255457 Jy ! Component: 200 - total flux cleaned = 0.0257824 Jy ! Total flux subtracted in 200 components = 0.0257824 Jy ! Clean residual min=-0.006011 max=0.004922 Jy/beam ! Clean residual mean=-0.000045 rms=0.001404 Jy/beam ! Combined flux in latest and established models = 0.343941 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 32 components and 0.343941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071003Jy sigma=1.103658 ! Fit after self-cal, rms=0.070970Jy sigma=1.103314 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9462 x 2.584 at -6.486 degrees (North through East) ! Clean map min=-0.0055819 max=0.32366 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00643 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.04 KP 0.94 ! LA 1.02 MK 0.99 NL 1.03 OV 1.02 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00286 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.05 KP 0.91 ! LA 1.02 MK 1.02 NL 0.99 OV 1.00 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.001 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.98 KP 0.88 ! LA 1.00 MK 1.01 NL 0.98 OV 1.03 ! PT 1.06 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.972411 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 1.07 KP 0.99 ! LA 0.96 MK 1.02 NL 1.00 OV 1.05 ! PT 1.10 SC 1.01 ! ! ! Fit before self-cal, rms=0.070970Jy sigma=1.103314 ! Fit after self-cal, rms=0.068477Jy sigma=1.055705 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068477Jy sigma=1.055705 ! Fit after self-cal, rms=0.068466Jy sigma=1.055557 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9535 mas, bmaj=2.598 mas, bpa=-6.318 degrees ! Estimated noise=0.927768 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00233032 Jy ! Component: 100 - total flux cleaned = -0.00253618 Jy ! Component: 150 - total flux cleaned = -0.00262261 Jy ! Component: 200 - total flux cleaned = -0.00262541 Jy ! Total flux subtracted in 200 components = -0.00262541 Jy ! Clean residual min=-0.003462 max=0.003589 Jy/beam ! Clean residual mean=0.000021 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 0.341316 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 35 components and 0.341316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068376Jy sigma=1.053934 ! Fit after self-cal, rms=0.068356Jy sigma=1.053700 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068356Jy sigma=1.053700 ! Fit after self-cal, rms=0.065785Jy sigma=1.008855 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000308152 Jy ! Component: 100 - total flux cleaned = 0.000270385 Jy ! Component: 150 - total flux cleaned = 0.00027065 Jy ! Component: 200 - total flux cleaned = 0.000238136 Jy ! Total flux subtracted in 200 components = 0.000238136 Jy ! Clean residual min=-0.003295 max=0.003560 Jy/beam ! Clean residual mean=0.000020 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.341554 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.341554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065770Jy sigma=1.008226 ! Fit after self-cal, rms=0.065660Jy sigma=1.004488 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9535 x 2.598 at -6.318 degrees (North through East) ! Clean map min=-0.0032471 max=0.32358 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065660Jy sigma=1.004488 ! Fit after self-cal, rms=0.065534Jy sigma=0.986323 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065534Jy sigma=0.986323 ! Fit after self-cal, rms=0.065588Jy sigma=0.985833 ! Inverting map and beam ! Estimated beam: bmin=0.958 mas, bmaj=2.606 mas, bpa=-6.302 degrees ! Estimated noise=0.92894 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014023 Jy ! Component: 100 - total flux cleaned = 0.000137847 Jy ! Component: 150 - total flux cleaned = 0.000111122 Jy ! Component: 200 - total flux cleaned = 5.95141e-05 Jy ! Total flux subtracted in 200 components = 5.95141e-05 Jy ! Clean residual min=-0.003310 max=0.003619 Jy/beam ! Clean residual mean=0.000020 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.341613 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.341613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065577Jy sigma=0.985330 ! Fit after self-cal, rms=0.065608Jy sigma=0.985199 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065608Jy sigma=0.985199 ! Fit after self-cal, rms=0.063592Jy sigma=0.948360 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063592Jy sigma=0.948360 ! Fit after self-cal, rms=0.063593Jy sigma=0.948325 ! Inverting map and beam ! Estimated beam: bmin=0.9584 mas, bmaj=2.609 mas, bpa=-6.3 degrees ! Estimated noise=0.930182 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000599683 Jy ! Component: 100 - total flux cleaned = 0.000629639 Jy ! Component: 150 - total flux cleaned = 0.00055133 Jy ! Component: 200 - total flux cleaned = 0.00050354 Jy ! Total flux subtracted in 200 components = 0.00050354 Jy ! Clean residual min=-0.003164 max=0.003562 Jy/beam ! Clean residual mean=0.000015 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.342117 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.342117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063588Jy sigma=0.947882 ! Fit after self-cal, rms=0.063586Jy sigma=0.947857 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.443 mas, bmaj=4.964 mas, bpa=5.182 degrees ! Estimated noise=1.14437 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000115643 Jy ! Component: 100 - total flux cleaned = -0.0001311 Jy ! Component: 150 - total flux cleaned = -0.000146 Jy ! Component: 200 - total flux cleaned = -0.000159917 Jy ! Total flux subtracted in 200 components = -0.000159917 Jy ! Clean residual min=-0.002984 max=0.003381 Jy/beam ! Clean residual mean=0.000024 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.341957 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 43 components and 0.341957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063584Jy sigma=0.947822 ! Fit after self-cal, rms=0.063587Jy sigma=0.947785 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7467 mas, bmaj=2.041 mas, bpa=-7.999 degrees ! Estimated noise=1.35052 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.277973 Jy ! Component: 100 - total flux cleaned = 0.319838 Jy ! Component: 150 - total flux cleaned = 0.332784 Jy ! Component: 200 - total flux cleaned = 0.338407 Jy ! Total flux subtracted in 200 components = 0.338407 Jy ! Clean residual min=-0.005157 max=0.005045 Jy/beam ! Clean residual mean=0.000022 rms=0.001326 Jy/beam ! Combined flux in latest and established models = 0.338407 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.338407 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9584 mas, bmaj=2.609 mas, bpa=-6.3 degrees ! Estimated noise=0.930182 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0026224 Jy ! Component: 100 - total flux cleaned = 0.00283732 Jy ! Component: 150 - total flux cleaned = 0.00295342 Jy ! Component: 200 - total flux cleaned = 0.00300339 Jy ! Total flux subtracted in 200 components = 0.00300339 Jy ! Clean residual min=-0.003389 max=0.003679 Jy/beam ! Clean residual mean=0.000016 rms=0.000858 Jy/beam ! Combined flux in latest and established models = 0.34141 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.34141 Jy ! Inverting map ! Added new window around map position (-4.8, -19.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216567 Jy ! Component: 100 - total flux cleaned = 0.00200581 Jy ! Component: 150 - total flux cleaned = 0.00180498 Jy ! Component: 200 - total flux cleaned = 0.0018017 Jy ! Total flux subtracted in 200 components = 0.0018017 Jy ! Clean residual min=-0.003149 max=0.003038 Jy/beam ! Clean residual mean=0.000014 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.343212 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 53 components and 0.343212 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.443 mas, bmaj=4.964 mas, bpa=5.182 degrees ! Estimated noise=1.14437 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000192748 Jy ! Component: 100 - total flux cleaned = -4.37934e-05 Jy ! Component: 150 - total flux cleaned = 5.65851e-05 Jy ! Component: 200 - total flux cleaned = 0.00012216 Jy ! Total flux subtracted in 200 components = 0.00012216 Jy ! Clean residual min=-0.002702 max=0.002922 Jy/beam ! Clean residual mean=0.000021 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.343334 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 70 components and 0.343334 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9584 mas, bmaj=2.609 mas, bpa=-6.3 degrees ! Estimated noise=0.930182 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.6288e-06 Jy ! Component: 100 - total flux cleaned = -8.93645e-05 Jy ! Component: 150 - total flux cleaned = -0.000131182 Jy ! Component: 200 - total flux cleaned = -0.000173616 Jy ! Total flux subtracted in 200 components = -0.000173616 Jy ! Clean residual min=-0.003145 max=0.002976 Jy/beam ! Clean residual mean=0.000014 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.34316 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 84 components and 0.34316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063365Jy sigma=0.944456 ! Fit after self-cal, rms=0.063327Jy sigma=0.944142 wmodel J0653-1929_X_2005_05_12_yyk\_map.mod ! Writing 84 model components to file: J0653-1929_X_2005_05_12_yyk_map.mod wobs J0653-1929_X_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J0653-1929_X_2005_05_12_yyk_uvs.fits wwins J0653-1929_X_2005_05_12_yyk\_map.win ! wwins: Wrote 2 windows to J0653-1929_X_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.91234e-05 Jy ! Component: 100 - total flux cleaned = 0.000339619 Jy ! Component: 150 - total flux cleaned = 0.000921269 Jy ! Component: 200 - total flux cleaned = 0.00151914 Jy ! Component: 250 - total flux cleaned = 0.00204791 Jy ! Component: 300 - total flux cleaned = 0.00251339 Jy ! Component: 350 - total flux cleaned = 0.0029623 Jy ! Component: 400 - total flux cleaned = 0.00327773 Jy ! Component: 450 - total flux cleaned = 0.00366051 Jy ! Component: 500 - total flux cleaned = 0.00392049 Jy ! Component: 550 - total flux cleaned = 0.00413765 Jy ! Component: 600 - total flux cleaned = 0.00427903 Jy ! Component: 650 - total flux cleaned = 0.00445059 Jy ! Component: 700 - total flux cleaned = 0.00448417 Jy ! Component: 750 - total flux cleaned = 0.004649 Jy ! Component: 800 - total flux cleaned = 0.00474557 Jy ! Component: 850 - total flux cleaned = 0.00484104 Jy ! Component: 900 - total flux cleaned = 0.00493422 Jy ! Component: 950 - total flux cleaned = 0.00496423 Jy ! Component: 1000 - total flux cleaned = 0.00499399 Jy ! Component: 1050 - total flux cleaned = 0.00502356 Jy ! Component: 1100 - total flux cleaned = 0.00499549 Jy ! Component: 1150 - total flux cleaned = 0.00493956 Jy ! Component: 1200 - total flux cleaned = 0.00496724 Jy ! Component: 1250 - total flux cleaned = 0.00488549 Jy ! Component: 1300 - total flux cleaned = 0.00493964 Jy ! Component: 1350 - total flux cleaned = 0.00499283 Jy ! Component: 1400 - total flux cleaned = 0.00496635 Jy ! Component: 1450 - total flux cleaned = 0.00509546 Jy ! Component: 1500 - total flux cleaned = 0.0050702 Jy ! Component: 1550 - total flux cleaned = 0.00514595 Jy ! Component: 1600 - total flux cleaned = 0.00524497 Jy ! Component: 1650 - total flux cleaned = 0.00524471 Jy ! Component: 1700 - total flux cleaned = 0.00524477 Jy ! Component: 1750 - total flux cleaned = 0.00529299 Jy ! Component: 1800 - total flux cleaned = 0.00531684 Jy ! Component: 1850 - total flux cleaned = 0.00529344 Jy ! Component: 1900 - total flux cleaned = 0.00533972 Jy ! Component: 1950 - total flux cleaned = 0.00538512 Jy ! Component: 2000 - total flux cleaned = 0.00538456 Jy ! Total flux subtracted in 2048 components = 0.00538469 Jy ! Clean residual min=-0.001366 max=0.001109 Jy/beam ! Clean residual mean=0.000015 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.348545 Jy keep ! Adding 136 model components to the UV plane model. ! The established model now contains 220 components and 0.348545 Jy ![Exited script file: muppet] wmap "J0653-1929_X_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9584 x 2.609 at -6.3 degrees (North through East) ! Clean map min=-0.0022223 max=0.32547 Jy/beam ! Writing clean map to FITS file: J0653-1929_X_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.325466 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000413245 device "J0653-1929_X_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0653-1929_X_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.380911 0.380911 0.761821 1.52364 3.04728 6.09457 12.1891 24.3783 48.7565 97.5131 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.325 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9584 x 2.609 at -6.3 degrees (North through East) ! Clean map min=-0.0022223 max=0.32547 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0653-1929_X_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0653-1929_X_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0653-1929_X_2005_05_12_yyk_uvs.log closed on Sat Oct 8 17:06:10 2005