! Started logfile: J0653-0625_X_2005_06_30_yyk_uvs.log on Sat Oct 8 17:05:57 2005 obs J0653-0625_X_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J0653-0625_X_2005_06_30_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.913333 visibilities/baseline/integration-bin. ! Found source: J0653-0625 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1459 lines of history. ! ! Reading 1644 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0653-0625_X_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.254857 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7 mas, bmaj=1.761 mas, bpa=-1.346 degrees ! Estimated noise=1.27031 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.201354 Jy ! Component: 100 - total flux cleaned = 0.240572 Jy ! Total flux subtracted in 100 components = 0.240572 Jy ! Clean residual min=-0.009146 max=0.019138 Jy/beam ! Clean residual mean=0.000001 rms=0.002611 Jy/beam ! Combined flux in latest and established models = 0.240572 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.240572 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.077955Jy sigma=1.284090 ! Fit after self-cal, rms=0.077765Jy sigma=1.278906 ! Inverting map and beam ! Estimated beam: bmin=0.7 mas, bmaj=1.761 mas, bpa=-1.346 degrees ! Estimated noise=1.27031 mJy/beam. ! Added new window around map position (-2.2, 4.8). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0229486 Jy ! Component: 100 - total flux cleaned = 0.0357499 Jy ! Total flux subtracted in 100 components = 0.0357499 Jy ! Clean residual min=-0.007180 max=0.009160 Jy/beam ! Clean residual mean=-0.000005 rms=0.001976 Jy/beam ! Combined flux in latest and established models = 0.276322 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 26 components and 0.276322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071417Jy sigma=1.134706 ! Fit after self-cal, rms=0.071248Jy sigma=1.130707 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8799 mas, bmaj=2.101 mas, bpa=-0.8717 degrees ! Estimated noise=0.968669 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146168 Jy ! Component: 100 - total flux cleaned = 0.0226446 Jy ! Component: 150 - total flux cleaned = 0.0279079 Jy ! Component: 200 - total flux cleaned = 0.0315497 Jy ! Total flux subtracted in 200 components = 0.0315497 Jy ! Clean residual min=-0.005373 max=0.007720 Jy/beam ! Clean residual mean=-0.000008 rms=0.001525 Jy/beam ! Combined flux in latest and established models = 0.307871 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 45 components and 0.307871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069093Jy sigma=1.082334 ! Fit after self-cal, rms=0.068998Jy sigma=1.080282 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8799 x 2.101 at -0.8717 degrees (North through East) ! Clean map min=-0.0049159 max=0.23556 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0148 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.03 KP 0.96 ! LA 0.98 MK 0.99 NL 1.00 OV 1.04 ! PT 0.94 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.02737 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.94 HN 1.04 KP 0.92 ! LA 0.98 MK 0.98 NL 0.96 OV 1.00 ! PT 1.02 SC 0.89 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.991443 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.03 HN 0.91 KP 0.87 ! LA 0.98 MK 1.08 NL 0.99 OV 1.06 ! PT 1.05 SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.956338 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 1.01 KP 0.98 ! LA 0.98 MK 1.07 NL 1.01 OV 1.03 ! PT 1.13 SC 1.17 ! ! ! Fit before self-cal, rms=0.068998Jy sigma=1.080282 ! Fit after self-cal, rms=0.066773Jy sigma=1.044122 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066773Jy sigma=1.044122 ! Fit after self-cal, rms=0.066782Jy sigma=1.044088 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8865 mas, bmaj=2.117 mas, bpa=-0.398 degrees ! Estimated noise=0.965169 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113458 Jy ! Component: 100 - total flux cleaned = 0.0012427 Jy ! Component: 150 - total flux cleaned = 0.00144926 Jy ! Component: 200 - total flux cleaned = 0.00162975 Jy ! Total flux subtracted in 200 components = 0.00162975 Jy ! Clean residual min=-0.004886 max=0.005277 Jy/beam ! Clean residual mean=-0.000013 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 0.309501 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.309501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066748Jy sigma=1.042796 ! Fit after self-cal, rms=0.066719Jy sigma=1.042581 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066719Jy sigma=1.042581 ! Fit after self-cal, rms=0.064808Jy sigma=1.006064 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.2, 11.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00519812 Jy ! Component: 100 - total flux cleaned = 0.00502989 Jy ! Component: 150 - total flux cleaned = 0.00480661 Jy ! Component: 200 - total flux cleaned = 0.00460485 Jy ! Total flux subtracted in 200 components = 0.00460485 Jy ! Clean residual min=-0.004180 max=0.004052 Jy/beam ! Clean residual mean=-0.000016 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.314106 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 73 components and 0.314106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064447Jy sigma=0.998706 ! Fit after self-cal, rms=0.064346Jy sigma=0.995487 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8865 x 2.117 at -0.398 degrees (North through East) ! Clean map min=-0.0038258 max=0.23393 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064346Jy sigma=0.995487 ! Fit after self-cal, rms=0.063708Jy sigma=0.953119 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063708Jy sigma=0.953119 ! Fit after self-cal, rms=0.063723Jy sigma=0.952914 ! Inverting map and beam ! Estimated beam: bmin=0.886 mas, bmaj=2.105 mas, bpa=-0.3522 degrees ! Estimated noise=0.964214 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177567 Jy ! Component: 100 - total flux cleaned = 0.001896 Jy ! Component: 150 - total flux cleaned = 0.00194545 Jy ! Component: 200 - total flux cleaned = 0.00204054 Jy ! Total flux subtracted in 200 components = 0.00204054 Jy ! Clean residual min=-0.003652 max=0.003479 Jy/beam ! Clean residual mean=-0.000014 rms=0.000938 Jy/beam ! Combined flux in latest and established models = 0.316146 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 88 components and 0.316146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063616Jy sigma=0.951091 ! Fit after self-cal, rms=0.063623Jy sigma=0.950968 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063623Jy sigma=0.950968 ! Fit after self-cal, rms=0.062460Jy sigma=0.928698 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062460Jy sigma=0.928698 ! Fit after self-cal, rms=0.062472Jy sigma=0.928667 ! Inverting map and beam ! Estimated beam: bmin=0.8873 mas, bmaj=2.108 mas, bpa=-0.6001 degrees ! Estimated noise=0.968202 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115738 Jy ! Component: 100 - total flux cleaned = 0.00132131 Jy ! Component: 150 - total flux cleaned = 0.00147177 Jy ! Component: 200 - total flux cleaned = 0.00165579 Jy ! Total flux subtracted in 200 components = 0.00165579 Jy ! Clean residual min=-0.003544 max=0.003216 Jy/beam ! Clean residual mean=-0.000012 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.317802 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 102 components and 0.317802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062404Jy sigma=0.927256 ! Fit after self-cal, rms=0.062405Jy sigma=0.927184 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.226 mas, bmaj=3.806 mas, bpa=3.446 degrees ! Estimated noise=1.24969 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144938 Jy ! Component: 100 - total flux cleaned = 0.0016325 Jy ! Component: 150 - total flux cleaned = 0.00163154 Jy ! Component: 200 - total flux cleaned = 0.00163232 Jy ! Total flux subtracted in 200 components = 0.00163232 Jy ! Clean residual min=-0.003839 max=0.003641 Jy/beam ! Clean residual mean=-0.000029 rms=0.001219 Jy/beam ! Combined flux in latest and established models = 0.319435 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 110 components and 0.319435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062417Jy sigma=0.927252 ! Fit after self-cal, rms=0.062400Jy sigma=0.927056 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7015 mas, bmaj=1.769 mas, bpa=-1.361 degrees ! Estimated noise=1.28619 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.20424 Jy ! Component: 100 - total flux cleaned = 0.246636 Jy ! Component: 150 - total flux cleaned = 0.267899 Jy ! Component: 200 - total flux cleaned = 0.280697 Jy ! Total flux subtracted in 200 components = 0.280697 Jy ! Clean residual min=-0.005815 max=0.006831 Jy/beam ! Clean residual mean=-0.000002 rms=0.001456 Jy/beam ! Combined flux in latest and established models = 0.280697 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.280697 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8873 mas, bmaj=2.108 mas, bpa=-0.6001 degrees ! Estimated noise=0.968202 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 3.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.01306 Jy ! Component: 100 - total flux cleaned = 0.0210345 Jy ! Component: 150 - total flux cleaned = 0.0265086 Jy ! Component: 200 - total flux cleaned = 0.0303283 Jy ! Total flux subtracted in 200 components = 0.0303283 Jy ! Clean residual min=-0.003750 max=0.003631 Jy/beam ! Clean residual mean=-0.000007 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.311026 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 63 components and 0.311026 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.226 mas, bmaj=3.806 mas, bpa=3.446 degrees ! Estimated noise=1.24969 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394285 Jy ! Component: 100 - total flux cleaned = 0.00627286 Jy ! Component: 150 - total flux cleaned = 0.00750528 Jy ! Component: 200 - total flux cleaned = 0.0079187 Jy ! Total flux subtracted in 200 components = 0.0079187 Jy ! Clean residual min=-0.003899 max=0.003375 Jy/beam ! Clean residual mean=-0.000030 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 0.318944 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 80 components and 0.318944 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8873 mas, bmaj=2.108 mas, bpa=-0.6001 degrees ! Estimated noise=0.968202 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00058556 Jy ! Component: 100 - total flux cleaned = -0.000358537 Jy ! Component: 150 - total flux cleaned = -0.000161028 Jy ! Component: 200 - total flux cleaned = 1.68489e-05 Jy ! Total flux subtracted in 200 components = 1.68489e-05 Jy ! Clean residual min=-0.003524 max=0.003358 Jy/beam ! Clean residual mean=-0.000014 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.318961 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 99 components and 0.318961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062255Jy sigma=0.923773 ! Fit after self-cal, rms=0.062208Jy sigma=0.923212 wmodel J0653-0625_X_2005_06_30_yyk\_map.mod ! Writing 99 model components to file: J0653-0625_X_2005_06_30_yyk_map.mod wobs J0653-0625_X_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J0653-0625_X_2005_06_30_yyk_uvs.fits wwins J0653-0625_X_2005_06_30_yyk\_map.win ! wwins: Wrote 4 windows to J0653-0625_X_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000652024 Jy ! Component: 100 - total flux cleaned = -0.0011108 Jy ! Component: 150 - total flux cleaned = -0.00137836 Jy ! Component: 200 - total flux cleaned = -0.00158278 Jy ! Component: 250 - total flux cleaned = -0.00172828 Jy ! Component: 300 - total flux cleaned = -0.00196355 Jy ! Component: 350 - total flux cleaned = -0.00214646 Jy ! Component: 400 - total flux cleaned = -0.0023672 Jy ! Component: 450 - total flux cleaned = -0.00249617 Jy ! Component: 500 - total flux cleaned = -0.00258066 Jy ! Component: 550 - total flux cleaned = -0.00274532 Jy ! Component: 600 - total flux cleaned = -0.0028252 Jy ! Component: 650 - total flux cleaned = -0.00282529 Jy ! Component: 700 - total flux cleaned = -0.00297891 Jy ! Component: 750 - total flux cleaned = -0.00286636 Jy ! Component: 800 - total flux cleaned = -0.00294036 Jy ! Component: 850 - total flux cleaned = -0.00294011 Jy ! Component: 900 - total flux cleaned = -0.00290477 Jy ! Component: 950 - total flux cleaned = -0.00287002 Jy ! Component: 1000 - total flux cleaned = -0.00286979 Jy ! Component: 1050 - total flux cleaned = -0.00286917 Jy ! Component: 1100 - total flux cleaned = -0.00290178 Jy ! Component: 1150 - total flux cleaned = -0.00296725 Jy ! Component: 1200 - total flux cleaned = -0.00309561 Jy ! Component: 1250 - total flux cleaned = -0.00312638 Jy ! Component: 1300 - total flux cleaned = -0.00312611 Jy ! Component: 1350 - total flux cleaned = -0.00321851 Jy ! Component: 1400 - total flux cleaned = -0.00327956 Jy ! Component: 1450 - total flux cleaned = -0.00328026 Jy ! Component: 1500 - total flux cleaned = -0.00339912 Jy ! Component: 1550 - total flux cleaned = -0.00342804 Jy ! Component: 1600 - total flux cleaned = -0.00345729 Jy ! Component: 1650 - total flux cleaned = -0.0035146 Jy ! Component: 1700 - total flux cleaned = -0.00354336 Jy ! Component: 1750 - total flux cleaned = -0.00368225 Jy ! Component: 1800 - total flux cleaned = -0.00368206 Jy ! Component: 1850 - total flux cleaned = -0.00368204 Jy ! Component: 1900 - total flux cleaned = -0.003736 Jy ! Component: 1950 - total flux cleaned = -0.00381577 Jy ! Component: 2000 - total flux cleaned = -0.0038419 Jy ! Total flux subtracted in 2048 components = -0.00389429 Jy ! Clean residual min=-0.001770 max=0.001760 Jy/beam ! Clean residual mean=-0.000008 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.315067 Jy keep ! Adding 156 model components to the UV plane model. ! The established model now contains 255 components and 0.315067 Jy ![Exited script file: muppet] wmap "J0653-0625_X_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8873 x 2.108 at -0.6001 degrees (North through East) ! Clean map min=-0.0028779 max=0.23559 Jy/beam ! Writing clean map to FITS file: J0653-0625_X_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.235588 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000520485 device "J0653-0625_X_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0653-0625_X_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.662792 0.662792 1.32558 2.65117 5.30233 10.6047 21.2093 42.4187 84.8373 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.235 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8873 x 2.108 at -0.6001 degrees (North through East) ! Clean map min=-0.0028779 max=0.23559 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0653-0625_X_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0653-0625_X_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0653-0625_X_2005_06_30_yyk_uvs.log closed on Sat Oct 8 17:06:01 2005