! Started logfile: J0646-3903_X_2005_05_12_yyk_uvs.log on Sat Oct 8 17:04:57 2005 obs J0646-3903_X_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J0646-3903_X_2005_05_12_yyk_uve.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.611852 visibilities/baseline/integration-bin. ! Found source: J0646-3903 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1439 lines of history. ! ! Reading 1652 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0646-3903_X_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.156158 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9117 mas, bmaj=6.671 mas, bpa=-14.04 degrees ! Estimated noise=2.36497 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0.2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0958512 Jy ! Component: 100 - total flux cleaned = 0.118827 Jy ! Total flux subtracted in 100 components = 0.118827 Jy ! Clean residual min=-0.013682 max=0.016288 Jy/beam ! Clean residual mean=0.000095 rms=0.004813 Jy/beam ! Combined flux in latest and established models = 0.118827 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.118827 Jy ! ! Correcting IF 1. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.100909Jy sigma=1.271502 ! Fit after self-cal, rms=0.100204Jy sigma=1.234878 ! Inverting map and beam ! Estimated beam: bmin=0.9117 mas, bmaj=6.671 mas, bpa=-14.04 degrees ! Estimated noise=2.36497 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.33 mas, bmaj=7.454 mas, bpa=-11.06 degrees ! Estimated noise=1.54223 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245865 Jy ! Component: 100 - total flux cleaned = 0.0339151 Jy ! Component: 150 - total flux cleaned = 0.0384875 Jy ! Component: 200 - total flux cleaned = 0.0408457 Jy ! Total flux subtracted in 200 components = 0.0408457 Jy ! Clean residual min=-0.007984 max=0.008558 Jy/beam ! Clean residual mean=-0.000054 rms=0.002800 Jy/beam ! Combined flux in latest and established models = 0.159673 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 55 model components to the UV plane model. ! The established model now contains 79 components and 0.159673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098405Jy sigma=1.155324 ! Fit after self-cal, rms=0.098435Jy sigma=1.154867 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.33 x 7.454 at -11.06 degrees (North through East) ! Clean map min=-0.0077214 max=0.10244 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.990796 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.91 HN 1.00* KP 0.98 ! LA 1.03 MK 1.04 NL 1.00* OV 1.11 ! PT 0.94 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.983391 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.13 ! LA 0.97 MK 1.03 NL 1.00* OV 0.95 ! PT 1.13 SC 1.00* ! ! ! Fit before self-cal, rms=0.098435Jy sigma=1.154867 ! Fit after self-cal, rms=0.098383Jy sigma=1.145660 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098383Jy sigma=1.145660 ! Fit after self-cal, rms=0.098358Jy sigma=1.145313 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.342 mas, bmaj=7.437 mas, bpa=-10.84 degrees ! Estimated noise=1.52845 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000484475 Jy ! Component: 100 - total flux cleaned = 0.000563309 Jy ! Component: 150 - total flux cleaned = 0.000623589 Jy ! Component: 200 - total flux cleaned = 0.000670303 Jy ! Total flux subtracted in 200 components = 0.000670303 Jy ! Clean residual min=-0.006063 max=0.007840 Jy/beam ! Clean residual mean=-0.000047 rms=0.002386 Jy/beam ! Combined flux in latest and established models = 0.160343 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 88 components and 0.160343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098184Jy sigma=1.144013 ! Fit after self-cal, rms=0.098176Jy sigma=1.143701 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098176Jy sigma=1.143701 ! Fit after self-cal, rms=0.091423Jy sigma=1.048247 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00338078 Jy ! Component: 100 - total flux cleaned = 0.00328293 Jy ! Component: 150 - total flux cleaned = 0.00318825 Jy ! Component: 200 - total flux cleaned = 0.00326378 Jy ! Total flux subtracted in 200 components = 0.00326378 Jy ! Clean residual min=-0.006049 max=0.006588 Jy/beam ! Clean residual mean=-0.000038 rms=0.002065 Jy/beam ! Combined flux in latest and established models = 0.163607 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 97 components and 0.163607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091529Jy sigma=1.046089 ! Fit after self-cal, rms=0.090945Jy sigma=1.039373 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.342 x 7.437 at -10.84 degrees (North through East) ! Clean map min=-0.005822 max=0.10192 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090945Jy sigma=1.039373 ! Fit after self-cal, rms=0.092009Jy sigma=1.034841 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092009Jy sigma=1.034841 ! Fit after self-cal, rms=0.092086Jy sigma=1.033847 ! Inverting map and beam ! Estimated beam: bmin=1.342 mas, bmaj=7.406 mas, bpa=-10.85 degrees ! Estimated noise=1.53987 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185212 Jy ! Component: 100 - total flux cleaned = 0.00215965 Jy ! Component: 150 - total flux cleaned = 0.00228875 Jy ! Component: 200 - total flux cleaned = 0.00235007 Jy ! Total flux subtracted in 200 components = 0.00235007 Jy ! Clean residual min=-0.006083 max=0.006449 Jy/beam ! Clean residual mean=-0.000042 rms=0.002086 Jy/beam ! Combined flux in latest and established models = 0.165957 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 101 components and 0.165957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092121Jy sigma=1.033170 ! Fit after self-cal, rms=0.092196Jy sigma=1.032964 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092196Jy sigma=1.032964 ! Fit after self-cal, rms=0.094330Jy sigma=1.037005 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094330Jy sigma=1.037005 ! Fit after self-cal, rms=0.094307Jy sigma=1.036759 ! Inverting map and beam ! Estimated beam: bmin=1.329 mas, bmaj=7.486 mas, bpa=-10.97 degrees ! Estimated noise=1.57232 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280259 Jy ! Component: 100 - total flux cleaned = 0.00286417 Jy ! Component: 150 - total flux cleaned = 0.00283104 Jy ! Component: 200 - total flux cleaned = 0.00280127 Jy ! Total flux subtracted in 200 components = 0.00280127 Jy ! Clean residual min=-0.005846 max=0.006301 Jy/beam ! Clean residual mean=-0.000047 rms=0.001946 Jy/beam ! Combined flux in latest and established models = 0.168758 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 107 components and 0.168758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094368Jy sigma=1.035501 ! Fit after self-cal, rms=0.094395Jy sigma=1.035450 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=15.88 mas, bpa=9.854 degrees ! Estimated noise=1.70937 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172379 Jy ! Component: 100 - total flux cleaned = 0.000227978 Jy ! Component: 150 - total flux cleaned = 0.000256108 Jy ! Component: 200 - total flux cleaned = 0.000253971 Jy ! Total flux subtracted in 200 components = 0.000253971 Jy ! Clean residual min=-0.005818 max=0.005970 Jy/beam ! Clean residual mean=-0.000055 rms=0.002173 Jy/beam ! Combined flux in latest and established models = 0.169012 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 110 components and 0.169012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094390Jy sigma=1.035351 ! Fit after self-cal, rms=0.094423Jy sigma=1.035307 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.906 mas, bmaj=6.681 mas, bpa=-14 degrees ! Estimated noise=2.45483 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.105942 Jy ! Component: 100 - total flux cleaned = 0.128291 Jy ! Component: 150 - total flux cleaned = 0.140176 Jy ! Component: 200 - total flux cleaned = 0.147461 Jy ! Total flux subtracted in 200 components = 0.147461 Jy ! Clean residual min=-0.010683 max=0.010069 Jy/beam ! Clean residual mean=0.000058 rms=0.003237 Jy/beam ! Combined flux in latest and established models = 0.147461 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.147461 Jy ! Inverting map and beam ! Estimated beam: bmin=1.329 mas, bmaj=7.486 mas, bpa=-10.97 degrees ! Estimated noise=1.57232 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117007 Jy ! Component: 100 - total flux cleaned = 0.0158794 Jy ! Component: 150 - total flux cleaned = 0.0172918 Jy ! Component: 200 - total flux cleaned = 0.0176385 Jy ! Total flux subtracted in 200 components = 0.0176385 Jy ! Clean residual min=-0.006005 max=0.006960 Jy/beam ! Clean residual mean=-0.000050 rms=0.002048 Jy/beam ! Combined flux in latest and established models = 0.1651 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 88 components and 0.1651 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=15.88 mas, bpa=9.854 degrees ! Estimated noise=1.70937 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000558785 Jy ! Component: 100 - total flux cleaned = 0.000640393 Jy ! Component: 150 - total flux cleaned = 0.000755987 Jy ! Component: 200 - total flux cleaned = 0.000829505 Jy ! Total flux subtracted in 200 components = 0.000829505 Jy ! Clean residual min=-0.006116 max=0.006699 Jy/beam ! Clean residual mean=-0.000059 rms=0.002286 Jy/beam ! Combined flux in latest and established models = 0.165929 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 92 components and 0.165929 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.329 mas, bmaj=7.486 mas, bpa=-10.97 degrees ! Estimated noise=1.57232 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -4.38423e-05 Jy ! Component: 100 - total flux cleaned = -8.29618e-05 Jy ! Component: 150 - total flux cleaned = -4.76221e-06 Jy ! Component: 200 - total flux cleaned = -4.51093e-06 Jy ! Total flux subtracted in 200 components = -4.51093e-06 Jy ! Clean residual min=-0.005985 max=0.006993 Jy/beam ! Clean residual mean=-0.000050 rms=0.002007 Jy/beam ! Combined flux in latest and established models = 0.165925 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 99 components and 0.165925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094605Jy sigma=1.037298 ! Fit after self-cal, rms=0.094598Jy sigma=1.037232 wmodel J0646-3903_X_2005_05_12_yyk\_map.mod ! Writing 99 model components to file: J0646-3903_X_2005_05_12_yyk_map.mod wobs J0646-3903_X_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J0646-3903_X_2005_05_12_yyk_uvs.fits wwins J0646-3903_X_2005_05_12_yyk\_map.win ! wwins: Wrote 1 windows to J0646-3903_X_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144593 Jy ! Component: 100 - total flux cleaned = 0.0020254 Jy ! Component: 150 - total flux cleaned = 0.00219915 Jy ! Component: 200 - total flux cleaned = 0.00219604 Jy ! Component: 250 - total flux cleaned = 0.00234536 Jy ! Component: 300 - total flux cleaned = 0.0024819 Jy ! Component: 350 - total flux cleaned = 0.00254604 Jy ! Component: 400 - total flux cleaned = 0.00296259 Jy ! Component: 450 - total flux cleaned = 0.00307593 Jy ! Component: 500 - total flux cleaned = 0.00307497 Jy ! Component: 550 - total flux cleaned = 0.00297025 Jy ! Component: 600 - total flux cleaned = 0.00297026 Jy ! Component: 650 - total flux cleaned = 0.00287056 Jy ! Component: 700 - total flux cleaned = 0.00268158 Jy ! Component: 750 - total flux cleaned = 0.00249763 Jy ! Component: 800 - total flux cleaned = 0.00227298 Jy ! Component: 850 - total flux cleaned = 0.00209715 Jy ! Component: 900 - total flux cleaned = 0.00201161 Jy ! Component: 950 - total flux cleaned = 0.00188497 Jy ! Component: 1000 - total flux cleaned = 0.00188481 Jy ! Component: 1050 - total flux cleaned = 0.00176343 Jy ! Component: 1100 - total flux cleaned = 0.0016837 Jy ! Component: 1150 - total flux cleaned = 0.00152774 Jy ! Component: 1200 - total flux cleaned = 0.00152836 Jy ! Component: 1250 - total flux cleaned = 0.00149049 Jy ! Component: 1300 - total flux cleaned = 0.00141631 Jy ! Component: 1350 - total flux cleaned = 0.00145312 Jy ! Component: 1400 - total flux cleaned = 0.00134457 Jy ! Component: 1450 - total flux cleaned = 0.00123725 Jy ! Component: 1500 - total flux cleaned = 0.00106015 Jy ! Component: 1550 - total flux cleaned = 0.000990132 Jy ! Component: 1600 - total flux cleaned = 0.000816804 Jy ! Component: 1650 - total flux cleaned = 0.000816459 Jy ! Component: 1700 - total flux cleaned = 0.000782027 Jy ! Component: 1750 - total flux cleaned = 0.000614302 Jy ! Component: 1800 - total flux cleaned = 0.00061374 Jy ! Component: 1850 - total flux cleaned = 0.00054813 Jy ! Component: 1900 - total flux cleaned = 0.000483029 Jy ! Component: 1950 - total flux cleaned = 0.000418569 Jy ! Component: 2000 - total flux cleaned = 0.000450804 Jy ! Total flux subtracted in 2048 components = 0.000387522 Jy ! Clean residual min=-0.001667 max=0.001799 Jy/beam ! Clean residual mean=-0.000013 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.166312 Jy keep ! Adding 124 model components to the UV plane model. ! The established model now contains 222 components and 0.166312 Jy ![Exited script file: muppet] wmap "J0646-3903_X_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.329 x 7.486 at -10.97 degrees (North through East) ! Clean map min=-0.0046961 max=0.12066 Jy/beam ! Writing clean map to FITS file: J0646-3903_X_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.120663 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000723797 device "J0646-3903_X_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0646-3903_X_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.79955 1.79955 3.5991 7.19821 14.3964 28.7928 57.5857 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.12 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.329 x 7.486 at -10.97 degrees (North through East) ! Clean map min=-0.0046961 max=0.12066 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0646-3903_X_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0646-3903_X_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0646-3903_X_2005_05_12_yyk_uvs.log closed on Sat Oct 8 17:05:01 2005