! Started logfile: J0632-2614_S_2005_06_30_yyk_uvs.log on Sat Oct 8 17:03:39 2005 obs J0632-2614_S_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J0632-2614_S_2005_06_30_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.713333 visibilities/baseline/integration-bin. ! Found source: J0632-2614 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1469 lines of history. ! ! Reading 1284 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0632-2614_S_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.172587 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.462 mas, bmaj=6.883 mas, bpa=-3.05 degrees ! Estimated noise=3.70917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0610679 Jy ! Component: 100 - total flux cleaned = 0.0698659 Jy ! Total flux subtracted in 100 components = 0.0698659 Jy ! Clean residual min=-0.016579 max=0.019927 Jy/beam ! Clean residual mean=0.000307 rms=0.004533 Jy/beam ! Combined flux in latest and established models = 0.0698659 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0698659 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.156696Jy sigma=1.364821 ! Fit after self-cal, rms=0.148984Jy sigma=1.262747 ! Inverting map and beam ! Estimated beam: bmin=2.462 mas, bmaj=6.88 mas, bpa=-3.03 degrees ! Estimated noise=3.70999 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.459 mas, bmaj=10.9 mas, bpa=-10.53 degrees ! Estimated noise=2.10318 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0299664 Jy ! Component: 100 - total flux cleaned = 0.0360027 Jy ! Component: 150 - total flux cleaned = 0.0361597 Jy ! Component: 200 - total flux cleaned = 0.0360369 Jy ! Total flux subtracted in 200 components = 0.0360369 Jy ! Clean residual min=-0.009317 max=0.013770 Jy/beam ! Clean residual mean=0.000874 rms=0.003431 Jy/beam ! Combined flux in latest and established models = 0.105903 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 20 components and 0.105903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146940Jy sigma=1.196164 ! Fit after self-cal, rms=0.146871Jy sigma=1.195961 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.459 x 10.9 at -10.53 degrees (North through East) ! Clean map min=-0.0088289 max=0.094481 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.146871Jy sigma=1.195961 ! Fit after self-cal, rms=0.146871Jy sigma=1.195961 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146871Jy sigma=1.195961 ! Fit after self-cal, rms=0.146872Jy sigma=1.195961 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.459 mas, bmaj=10.9 mas, bpa=-10.53 degrees ! Estimated noise=2.10318 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017124 Jy ! Component: 100 - total flux cleaned = 7.53833e-05 Jy ! Component: 150 - total flux cleaned = 7.42332e-05 Jy ! Component: 200 - total flux cleaned = 2.36141e-08 Jy ! Total flux subtracted in 200 components = 2.36141e-08 Jy ! Clean residual min=-0.009133 max=0.013788 Jy/beam ! Clean residual mean=0.000877 rms=0.003401 Jy/beam ! Combined flux in latest and established models = 0.105903 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 23 components and 0.105903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146890Jy sigma=1.194765 ! Fit after self-cal, rms=0.146871Jy sigma=1.194711 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146871Jy sigma=1.194711 ! Fit after self-cal, rms=0.137538Jy sigma=1.085904 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00765744 Jy ! Component: 100 - total flux cleaned = 0.0076608 Jy ! Component: 150 - total flux cleaned = 0.0076689 Jy ! Component: 200 - total flux cleaned = 0.00766895 Jy ! Total flux subtracted in 200 components = 0.00766895 Jy ! Clean residual min=-0.008763 max=0.013727 Jy/beam ! Clean residual mean=0.000782 rms=0.003244 Jy/beam ! Combined flux in latest and established models = 0.113572 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 0.113572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137466Jy sigma=1.079538 ! Fit after self-cal, rms=0.135661Jy sigma=1.065127 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.459 x 10.9 at -10.53 degrees (North through East) ! Clean map min=-0.0085451 max=0.10631 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135661Jy sigma=1.065127 ! Fit after self-cal, rms=0.135661Jy sigma=1.065127 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135661Jy sigma=1.065127 ! Fit after self-cal, rms=0.135349Jy sigma=1.063018 ! Inverting map and beam ! Estimated beam: bmin=3.459 mas, bmaj=10.9 mas, bpa=-10.53 degrees ! Estimated noise=2.10318 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000727285 Jy ! Component: 100 - total flux cleaned = 0.000645161 Jy ! Component: 150 - total flux cleaned = 0.000566307 Jy ! Component: 200 - total flux cleaned = 0.000496879 Jy ! Total flux subtracted in 200 components = 0.000496879 Jy ! Clean residual min=-0.008717 max=0.012971 Jy/beam ! Clean residual mean=0.000782 rms=0.003171 Jy/beam ! Combined flux in latest and established models = 0.114069 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.114069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135430Jy sigma=1.061899 ! Fit after self-cal, rms=0.135251Jy sigma=1.061441 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135251Jy sigma=1.061441 ! Fit after self-cal, rms=0.135251Jy sigma=1.061441 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135251Jy sigma=1.061441 ! Fit after self-cal, rms=0.135217Jy sigma=1.061339 ! Inverting map and beam ! Estimated beam: bmin=3.459 mas, bmaj=10.9 mas, bpa=-10.53 degrees ! Estimated noise=2.10318 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151875 Jy ! Component: 100 - total flux cleaned = -0.000153864 Jy ! Component: 150 - total flux cleaned = -0.000158527 Jy ! Component: 200 - total flux cleaned = -0.000154172 Jy ! Total flux subtracted in 200 components = -0.000154172 Jy ! Clean residual min=-0.008688 max=0.012792 Jy/beam ! Clean residual mean=0.000784 rms=0.003152 Jy/beam ! Combined flux in latest and established models = 0.113915 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.113915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135277Jy sigma=1.060603 ! Fit after self-cal, rms=0.135165Jy sigma=1.060510 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.06 mas, bmaj=28.54 mas, bpa=-4.389 degrees ! Estimated noise=2.54471 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245568 Jy ! Component: 100 - total flux cleaned = 0.000305019 Jy ! Component: 150 - total flux cleaned = 0.000391162 Jy ! Component: 200 - total flux cleaned = 0.000422693 Jy ! Total flux subtracted in 200 components = 0.000422693 Jy ! Clean residual min=-0.006993 max=0.012443 Jy/beam ! Clean residual mean=0.001325 rms=0.003520 Jy/beam ! Combined flux in latest and established models = 0.114337 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 35 components and 0.114337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135173Jy sigma=1.060648 ! Fit after self-cal, rms=0.135139Jy sigma=1.060476 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.462 mas, bmaj=6.88 mas, bpa=-3.03 degrees ! Estimated noise=3.70999 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0880724 Jy ! Component: 100 - total flux cleaned = 0.106636 Jy ! Component: 150 - total flux cleaned = 0.110752 Jy ! Component: 200 - total flux cleaned = 0.11218 Jy ! Total flux subtracted in 200 components = 0.11218 Jy ! Clean residual min=-0.016135 max=0.015619 Jy/beam ! Clean residual mean=0.000177 rms=0.003932 Jy/beam ! Combined flux in latest and established models = 0.11218 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.11218 Jy ! Inverting map and beam ! Estimated beam: bmin=3.459 mas, bmaj=10.9 mas, bpa=-10.53 degrees ! Estimated noise=2.10318 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000833508 Jy ! Component: 100 - total flux cleaned = 0.00144372 Jy ! Component: 150 - total flux cleaned = 0.00160876 Jy ! Component: 200 - total flux cleaned = 0.00160319 Jy ! Total flux subtracted in 200 components = 0.00160319 Jy ! Clean residual min=-0.009164 max=0.013142 Jy/beam ! Clean residual mean=0.000785 rms=0.003246 Jy/beam ! Combined flux in latest and established models = 0.113784 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 29 components and 0.113784 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.06 mas, bmaj=28.54 mas, bpa=-4.389 degrees ! Estimated noise=2.54471 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00039273 Jy ! Component: 100 - total flux cleaned = 0.000393609 Jy ! Component: 150 - total flux cleaned = 0.000396535 Jy ! Component: 200 - total flux cleaned = 0.000430544 Jy ! Total flux subtracted in 200 components = 0.000430544 Jy ! Clean residual min=-0.006888 max=0.012280 Jy/beam ! Clean residual mean=0.001328 rms=0.003502 Jy/beam ! Combined flux in latest and established models = 0.114214 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 33 components and 0.114214 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.459 mas, bmaj=10.9 mas, bpa=-10.53 degrees ! Estimated noise=2.10318 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.0734e-05 Jy ! Component: 100 - total flux cleaned = 3.19082e-05 Jy ! Component: 150 - total flux cleaned = -6.5937e-05 Jy ! Component: 200 - total flux cleaned = -6.83685e-05 Jy ! Total flux subtracted in 200 components = -6.83685e-05 Jy ! Clean residual min=-0.008858 max=0.013127 Jy/beam ! Clean residual mean=0.000781 rms=0.003185 Jy/beam ! Combined flux in latest and established models = 0.114146 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.114146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134921Jy sigma=1.061263 ! Fit after self-cal, rms=0.135115Jy sigma=1.060898 wmodel J0632-2614_S_2005_06_30_yyk\_map.mod ! Writing 37 model components to file: J0632-2614_S_2005_06_30_yyk_map.mod wobs J0632-2614_S_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J0632-2614_S_2005_06_30_yyk_uvs.fits wwins J0632-2614_S_2005_06_30_yyk\_map.win ! wwins: Wrote 1 windows to J0632-2614_S_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00558899 Jy ! Component: 100 - total flux cleaned = 0.0104049 Jy ! Component: 150 - total flux cleaned = 0.0146864 Jy ! Component: 200 - total flux cleaned = 0.0181402 Jy ! Component: 250 - total flux cleaned = 0.0203193 Jy ! Component: 300 - total flux cleaned = 0.021949 Jy ! Component: 350 - total flux cleaned = 0.0236087 Jy ! Component: 400 - total flux cleaned = 0.0252977 Jy ! Component: 450 - total flux cleaned = 0.0272542 Jy ! Component: 500 - total flux cleaned = 0.028797 Jy ! Component: 550 - total flux cleaned = 0.0304966 Jy ! Component: 600 - total flux cleaned = 0.0319332 Jy ! Component: 650 - total flux cleaned = 0.033524 Jy ! Component: 700 - total flux cleaned = 0.0350673 Jy ! Component: 750 - total flux cleaned = 0.0363804 Jy ! Component: 800 - total flux cleaned = 0.0377522 Jy ! Component: 850 - total flux cleaned = 0.0391773 Jy ! Component: 900 - total flux cleaned = 0.0404798 Jy ! Component: 950 - total flux cleaned = 0.0420068 Jy ! Component: 1000 - total flux cleaned = 0.0433348 Jy ! Component: 1050 - total flux cleaned = 0.0448779 Jy ! Component: 1100 - total flux cleaned = 0.0462296 Jy ! Component: 1150 - total flux cleaned = 0.047321 Jy ! Component: 1200 - total flux cleaned = 0.0483906 Jy ! Component: 1250 - total flux cleaned = 0.049441 Jy ! Component: 1300 - total flux cleaned = 0.050545 Jy ! Component: 1350 - total flux cleaned = 0.0516291 Jy ! Component: 1400 - total flux cleaned = 0.0524822 Jy ! Component: 1450 - total flux cleaned = 0.053462 Jy ! Component: 1500 - total flux cleaned = 0.0543585 Jy ! Component: 1550 - total flux cleaned = 0.055447 Jy ! Component: 1600 - total flux cleaned = 0.0563862 Jy ! Component: 1650 - total flux cleaned = 0.0572463 Jy ! Component: 1700 - total flux cleaned = 0.0581603 Jy ! Component: 1750 - total flux cleaned = 0.059126 Jy ! Component: 1800 - total flux cleaned = 0.0600148 Jy ! Component: 1850 - total flux cleaned = 0.0608916 Jy ! Component: 1900 - total flux cleaned = 0.0618182 Jy ! Component: 1950 - total flux cleaned = 0.0626107 Jy ! Component: 2000 - total flux cleaned = 0.0634532 Jy ! Total flux subtracted in 2048 components = 0.064226 Jy ! Clean residual min=-0.003336 max=0.003764 Jy/beam ! Clean residual mean=0.000375 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 0.178372 Jy keep ! Adding 126 model components to the UV plane model. ! The established model now contains 163 components and 0.178372 Jy ![Exited script file: muppet] wmap "J0632-2614_S_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.459 x 10.9 at -10.53 degrees (North through East) ! Clean map min=-0.0060108 max=0.10607 Jy/beam ! Writing clean map to FITS file: J0632-2614_S_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.106065 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00114062 device "J0632-2614_S_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0632-2614_S_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.22619 3.22619 6.45239 12.9048 25.8095 51.6191 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0034 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.106 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.459 x 10.9 at -10.53 degrees (North through East) ! Clean map min=-0.0060108 max=0.10607 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0632-2614_S_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0632-2614_S_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0632-2614_S_2005_06_30_yyk_uvs.log closed on Sat Oct 8 17:03:42 2005