! Started logfile: J0631-1410_X_2005_06_01_yyk_uvs.log on Sat Oct 8 17:03:34 2005 obs J0631-1410_X_2005_06_01_yyk_uve.fits ! Reading UV FITS file: J0631-1410_X_2005_06_01_yyk_uve.fits ! AN table 1: 9 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.91358 visibilities/baseline/integration-bin. ! Found source: J0631-1410 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1617 lines of history. ! ! Reading 1480 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0631-1410_X_2005_06_01_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.469344 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6946 mas, bmaj=1.735 mas, bpa=-1.859 degrees ! Estimated noise=1.46583 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.387933 Jy ! Component: 100 - total flux cleaned = 0.457859 Jy ! Total flux subtracted in 100 components = 0.457859 Jy ! Clean residual min=-0.010398 max=0.018952 Jy/beam ! Clean residual mean=-0.000009 rms=0.003121 Jy/beam ! Combined flux in latest and established models = 0.457859 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.457859 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.090384Jy sigma=1.319979 ! Fit after self-cal, rms=0.089795Jy sigma=1.310847 ! Inverting map and beam ! Estimated beam: bmin=0.6946 mas, bmaj=1.735 mas, bpa=-1.859 degrees ! Estimated noise=1.46583 mJy/beam. ! Added new window around map position (0.2, -1.6). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0259757 Jy ! Component: 100 - total flux cleaned = 0.0385469 Jy ! Total flux subtracted in 100 components = 0.0385469 Jy ! Clean residual min=-0.008938 max=0.009507 Jy/beam ! Clean residual mean=0.000000 rms=0.002233 Jy/beam ! Combined flux in latest and established models = 0.496406 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 30 components and 0.496406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083107Jy sigma=1.170811 ! Fit after self-cal, rms=0.082889Jy sigma=1.167364 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8626 mas, bmaj=2.112 mas, bpa=-1.272 degrees ! Estimated noise=1.09466 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104695 Jy ! Component: 100 - total flux cleaned = 0.0145891 Jy ! Component: 150 - total flux cleaned = 0.01546 Jy ! Component: 200 - total flux cleaned = 0.0158435 Jy ! Total flux subtracted in 200 components = 0.0158435 Jy ! Clean residual min=-0.007713 max=0.007272 Jy/beam ! Clean residual mean=0.000027 rms=0.001864 Jy/beam ! Combined flux in latest and established models = 0.51225 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.51225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081884Jy sigma=1.148787 ! Fit after self-cal, rms=0.081781Jy sigma=1.146535 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8626 x 2.112 at -1.272 degrees (North through East) ! Clean map min=-0.0073941 max=0.44857 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01073 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.01 KP 0.96 ! LA 0.99 MK 0.99 NL 1.00 OV 1.03 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01498 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.01 KP 0.93 ! LA 0.99 MK 0.99 NL 0.99 OV 1.01 ! PT 1.01 SC 0.93 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.01431 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.91 KP 0.89 ! LA 1.00 MK 1.04 NL 0.99 OV 1.02 ! PT 1.05 SC 0.93 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.955891 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.06 HN 0.97 KP 1.01 ! LA 1.00 MK 1.04 NL 0.99 OV 1.06 ! PT 1.07 SC 1.23 ! ! ! Fit before self-cal, rms=0.081781Jy sigma=1.146535 ! Fit after self-cal, rms=0.077466Jy sigma=1.085727 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077466Jy sigma=1.085727 ! Fit after self-cal, rms=0.077466Jy sigma=1.085702 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8654 mas, bmaj=2.12 mas, bpa=-1.394 degrees ! Estimated noise=1.09476 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125624 Jy ! Component: 100 - total flux cleaned = 0.00150855 Jy ! Component: 150 - total flux cleaned = 0.00144119 Jy ! Component: 200 - total flux cleaned = 0.00132307 Jy ! Total flux subtracted in 200 components = 0.00132307 Jy ! Clean residual min=-0.006083 max=0.005076 Jy/beam ! Clean residual mean=0.000029 rms=0.001408 Jy/beam ! Combined flux in latest and established models = 0.513573 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 57 components and 0.513573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077232Jy sigma=1.081906 ! Fit after self-cal, rms=0.077189Jy sigma=1.080922 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077189Jy sigma=1.080922 ! Fit after self-cal, rms=0.074946Jy sigma=1.040966 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000889274 Jy ! Component: 100 - total flux cleaned = 0.00103683 Jy ! Component: 150 - total flux cleaned = 0.000935441 Jy ! Component: 200 - total flux cleaned = 0.000886956 Jy ! Total flux subtracted in 200 components = 0.000886956 Jy ! Clean residual min=-0.005935 max=0.004784 Jy/beam ! Clean residual mean=0.000030 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 0.51446 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 64 components and 0.51446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074864Jy sigma=1.039231 ! Fit after self-cal, rms=0.074674Jy sigma=1.035702 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8654 x 2.12 at -1.394 degrees (North through East) ! Clean map min=-0.0055065 max=0.44891 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074674Jy sigma=1.035702 ! Fit after self-cal, rms=0.072034Jy sigma=0.955814 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072034Jy sigma=0.955814 ! Fit after self-cal, rms=0.072026Jy sigma=0.955527 ! Inverting map and beam ! Estimated beam: bmin=0.8653 mas, bmaj=2.12 mas, bpa=-1.368 degrees ! Estimated noise=1.0923 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 8.55294e-05 Jy ! Component: 100 - total flux cleaned = 0.000207585 Jy ! Component: 150 - total flux cleaned = 0.000115442 Jy ! Component: 200 - total flux cleaned = 0.000114384 Jy ! Total flux subtracted in 200 components = 0.000114384 Jy ! Clean residual min=-0.005078 max=0.004673 Jy/beam ! Clean residual mean=0.000015 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 0.514574 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 72 components and 0.514574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071957Jy sigma=0.954083 ! Fit after self-cal, rms=0.071937Jy sigma=0.953717 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071937Jy sigma=0.953717 ! Fit after self-cal, rms=0.070967Jy sigma=0.940098 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070967Jy sigma=0.940098 ! Fit after self-cal, rms=0.070964Jy sigma=0.940092 ! Inverting map and beam ! Estimated beam: bmin=0.8649 mas, bmaj=2.121 mas, bpa=-1.46 degrees ! Estimated noise=1.09252 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000169163 Jy ! Component: 100 - total flux cleaned = 0.00031995 Jy ! Component: 150 - total flux cleaned = 0.000320467 Jy ! Component: 200 - total flux cleaned = 0.000287112 Jy ! Total flux subtracted in 200 components = 0.000287112 Jy ! Clean residual min=-0.005044 max=0.004643 Jy/beam ! Clean residual mean=0.000015 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.514861 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 73 components and 0.514861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070916Jy sigma=0.939105 ! Fit after self-cal, rms=0.070901Jy sigma=0.938878 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.196 mas, bmaj=4.337 mas, bpa=2.773 degrees ! Estimated noise=1.41672 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000639481 Jy ! Component: 100 - total flux cleaned = 0.000645284 Jy ! Component: 150 - total flux cleaned = 0.000610202 Jy ! Component: 200 - total flux cleaned = 0.000582161 Jy ! Total flux subtracted in 200 components = 0.000582161 Jy ! Clean residual min=-0.006146 max=0.005707 Jy/beam ! Clean residual mean=0.000032 rms=0.001810 Jy/beam ! Combined flux in latest and established models = 0.515443 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 74 components and 0.515443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070938Jy sigma=0.939351 ! Fit after self-cal, rms=0.070915Jy sigma=0.939029 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6969 mas, bmaj=1.745 mas, bpa=-2.032 degrees ! Estimated noise=1.46663 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.388285 Jy ! Component: 100 - total flux cleaned = 0.458719 Jy ! Component: 150 - total flux cleaned = 0.484768 Jy ! Component: 200 - total flux cleaned = 0.497226 Jy ! Total flux subtracted in 200 components = 0.497226 Jy ! Clean residual min=-0.006578 max=0.007752 Jy/beam ! Clean residual mean=-0.000002 rms=0.001509 Jy/beam ! Combined flux in latest and established models = 0.497227 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.497227 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8649 mas, bmaj=2.121 mas, bpa=-1.46 degrees ! Estimated noise=1.09252 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.4, -4.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115181 Jy ! Component: 100 - total flux cleaned = 0.0173521 Jy ! Component: 150 - total flux cleaned = 0.0208728 Jy ! Component: 200 - total flux cleaned = 0.0228848 Jy ! Total flux subtracted in 200 components = 0.0228848 Jy ! Clean residual min=-0.004430 max=0.003479 Jy/beam ! Clean residual mean=0.000014 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 0.520111 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 59 components and 0.520111 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.196 mas, bmaj=4.337 mas, bpa=2.773 degrees ! Estimated noise=1.41672 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112791 Jy ! Component: 100 - total flux cleaned = 0.00113091 Jy ! Component: 150 - total flux cleaned = 0.00106488 Jy ! Component: 200 - total flux cleaned = 0.00103501 Jy ! Total flux subtracted in 200 components = 0.00103501 Jy ! Clean residual min=-0.005498 max=0.004553 Jy/beam ! Clean residual mean=0.000029 rms=0.001550 Jy/beam ! Combined flux in latest and established models = 0.521146 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 73 components and 0.521146 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8649 mas, bmaj=2.121 mas, bpa=-1.46 degrees ! Estimated noise=1.09252 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000120685 Jy ! Component: 100 - total flux cleaned = 4.80079e-05 Jy ! Component: 150 - total flux cleaned = 0.000125208 Jy ! Component: 200 - total flux cleaned = 0.000160342 Jy ! Total flux subtracted in 200 components = 0.000160342 Jy ! Clean residual min=-0.004195 max=0.003562 Jy/beam ! Clean residual mean=0.000013 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.521307 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 88 components and 0.521307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070564Jy sigma=0.930072 ! Fit after self-cal, rms=0.070492Jy sigma=0.929168 wmodel J0631-1410_X_2005_06_01_yyk\_map.mod ! Writing 88 model components to file: J0631-1410_X_2005_06_01_yyk_map.mod wobs J0631-1410_X_2005_06_01_yyk\_uvs.fits ! Writing UV FITS file: J0631-1410_X_2005_06_01_yyk_uvs.fits wwins J0631-1410_X_2005_06_01_yyk\_map.win ! wwins: Wrote 3 windows to J0631-1410_X_2005_06_01_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140209 Jy ! Component: 100 - total flux cleaned = -0.00146419 Jy ! Component: 150 - total flux cleaned = -0.00128796 Jy ! Component: 200 - total flux cleaned = -0.0011162 Jy ! Component: 250 - total flux cleaned = -0.000786141 Jy ! Component: 300 - total flux cleaned = -0.000469566 Jy ! Component: 350 - total flux cleaned = -0.000111492 Jy ! Component: 400 - total flux cleaned = 0.000382666 Jy ! Component: 450 - total flux cleaned = 0.000766289 Jy ! Component: 500 - total flux cleaned = 0.00118654 Jy ! Component: 550 - total flux cleaned = 0.00150466 Jy ! Component: 600 - total flux cleaned = 0.00181553 Jy ! Component: 650 - total flux cleaned = 0.00216295 Jy ! Component: 700 - total flux cleaned = 0.00241833 Jy ! Component: 750 - total flux cleaned = 0.00270977 Jy ! Component: 800 - total flux cleaned = 0.00287278 Jy ! Component: 850 - total flux cleaned = 0.00299343 Jy ! Component: 900 - total flux cleaned = 0.00322916 Jy ! Component: 950 - total flux cleaned = 0.00346219 Jy ! Component: 1000 - total flux cleaned = 0.00365298 Jy ! Component: 1050 - total flux cleaned = 0.00387792 Jy ! Component: 1100 - total flux cleaned = 0.00421 Jy ! Component: 1150 - total flux cleaned = 0.00431836 Jy ! Component: 1200 - total flux cleaned = 0.00438966 Jy ! Component: 1250 - total flux cleaned = 0.00460196 Jy ! Component: 1300 - total flux cleaned = 0.00470801 Jy ! Component: 1350 - total flux cleaned = 0.005018 Jy ! Component: 1400 - total flux cleaned = 0.00518782 Jy ! Component: 1450 - total flux cleaned = 0.00522118 Jy ! Component: 1500 - total flux cleaned = 0.0053873 Jy ! Component: 1550 - total flux cleaned = 0.00545362 Jy ! Component: 1600 - total flux cleaned = 0.00564776 Jy ! Component: 1650 - total flux cleaned = 0.0057755 Jy ! Component: 1700 - total flux cleaned = 0.00590177 Jy ! Component: 1750 - total flux cleaned = 0.00605782 Jy ! Component: 1800 - total flux cleaned = 0.00621178 Jy ! Component: 1850 - total flux cleaned = 0.00639403 Jy ! Component: 1900 - total flux cleaned = 0.00642393 Jy ! Component: 1950 - total flux cleaned = 0.00660245 Jy ! Component: 2000 - total flux cleaned = 0.00669028 Jy ! Total flux subtracted in 2048 components = 0.00677752 Jy ! Clean residual min=-0.001846 max=0.001446 Jy/beam ! Clean residual mean=0.000010 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.528084 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 232 components and 0.528084 Jy ![Exited script file: muppet] wmap "J0631-1410_X_2005_06_01_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8649 x 2.121 at -1.46 degrees (North through East) ! Clean map min=-0.0027946 max=0.44761 Jy/beam ! Writing clean map to FITS file: J0631-1410_X_2005_06_01_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.447611 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000533751 device "J0631-1410_X_2005_06_01_yyk\_map.eps/VPS" ! Attempting to open device: 'J0631-1410_X_2005_06_01_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.357733 0.357733 0.715467 1.43093 2.86187 5.72373 11.4475 22.8949 45.7899 91.5797 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.447 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8649 x 2.121 at -1.46 degrees (North through East) ! Clean map min=-0.0027946 max=0.44761 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0631-1410_X_2005_06_01_yyk\_map.gif/gif" ! Attempting to open device: 'J0631-1410_X_2005_06_01_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0631-1410_X_2005_06_01_yyk_uvs.log closed on Sat Oct 8 17:03:38 2005