! Started logfile: J0628-2805_X_2005_06_30_yyk_uvs.log on Sat Oct 8 17:03:09 2005 obs J0628-2805_X_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J0628-2805_X_2005_06_30_yyk_uve.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.977778 visibilities/baseline/integration-bin. ! Found source: J0628-2805 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1459 lines of history. ! ! Reading 3168 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0628-2805_X_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.163582 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6664 mas, bmaj=1.635 mas, bpa=1.736 degrees ! Estimated noise=1.34191 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.123767 Jy ! Component: 100 - total flux cleaned = 0.143566 Jy ! Total flux subtracted in 100 components = 0.143566 Jy ! Clean residual min=-0.006055 max=0.008379 Jy/beam ! Clean residual mean=0.000001 rms=0.001699 Jy/beam ! Combined flux in latest and established models = 0.143566 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.143566 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.068410Jy sigma=1.080480 ! Fit after self-cal, rms=0.068373Jy sigma=1.077509 ! Inverting map and beam ! Estimated beam: bmin=0.6664 mas, bmaj=1.635 mas, bpa=1.736 degrees ! Estimated noise=1.34191 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8571 mas, bmaj=2.129 mas, bpa=-0.4687 degrees ! Estimated noise=0.768186 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128245 Jy ! Component: 100 - total flux cleaned = 0.0170065 Jy ! Component: 150 - total flux cleaned = 0.0185484 Jy ! Component: 200 - total flux cleaned = 0.0189082 Jy ! Total flux subtracted in 200 components = 0.0189082 Jy ! Clean residual min=-0.004003 max=0.004220 Jy/beam ! Clean residual mean=0.000023 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.162474 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 29 components and 0.162474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067110Jy sigma=1.048151 ! Fit after self-cal, rms=0.067098Jy sigma=1.047913 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8571 x 2.129 at -0.4687 degrees (North through East) ! Clean map min=-0.0036794 max=0.14857 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.994297 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 1.04 KP 0.84 ! LA 1.00 MK 1.02 NL 1.03 OV 1.07 ! PT 1.05 SC 0.94 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.067098Jy sigma=1.047913 ! Fit after self-cal, rms=0.066760Jy sigma=1.041526 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066760Jy sigma=1.041526 ! Fit after self-cal, rms=0.066755Jy sigma=1.041370 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.858 mas, bmaj=2.128 mas, bpa=-0.1969 degrees ! Estimated noise=0.766901 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123466 Jy ! Component: 100 - total flux cleaned = -0.000122377 Jy ! Component: 150 - total flux cleaned = -0.000121954 Jy ! Component: 200 - total flux cleaned = -0.000100633 Jy ! Total flux subtracted in 200 components = -0.000100633 Jy ! Clean residual min=-0.003428 max=0.004207 Jy/beam ! Clean residual mean=0.000020 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.162373 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.162373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066741Jy sigma=1.041148 ! Fit after self-cal, rms=0.066734Jy sigma=1.040983 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066734Jy sigma=1.040983 ! Fit after self-cal, rms=0.063148Jy sigma=0.974597 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114417 Jy ! Component: 100 - total flux cleaned = 0.00120772 Jy ! Component: 150 - total flux cleaned = 0.00120703 Jy ! Component: 200 - total flux cleaned = 0.00116208 Jy ! Total flux subtracted in 200 components = 0.00116208 Jy ! Clean residual min=-0.003344 max=0.003774 Jy/beam ! Clean residual mean=0.000022 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.163535 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.163535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063140Jy sigma=0.974007 ! Fit after self-cal, rms=0.062942Jy sigma=0.969223 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.858 x 2.128 at -0.1969 degrees (North through East) ! Clean map min=-0.0033911 max=0.1502 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062942Jy sigma=0.969223 ! Fit after self-cal, rms=0.062627Jy sigma=0.946512 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062627Jy sigma=0.946512 ! Fit after self-cal, rms=0.062668Jy sigma=0.946010 ! Inverting map and beam ! Estimated beam: bmin=0.85 mas, bmaj=2.11 mas, bpa=0.6591 degrees ! Estimated noise=0.751423 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00166278 Jy ! Component: 100 - total flux cleaned = -0.00169549 Jy ! Component: 150 - total flux cleaned = -0.00172681 Jy ! Component: 200 - total flux cleaned = -0.0017532 Jy ! Total flux subtracted in 200 components = -0.0017532 Jy ! Clean residual min=-0.002692 max=0.002895 Jy/beam ! Clean residual mean=0.000015 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.161782 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.161782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062583Jy sigma=0.944784 ! Fit after self-cal, rms=0.062620Jy sigma=0.944710 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062620Jy sigma=0.944710 ! Fit after self-cal, rms=0.062661Jy sigma=0.932398 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062661Jy sigma=0.932398 ! Fit after self-cal, rms=0.062697Jy sigma=0.932298 ! Inverting map and beam ! Estimated beam: bmin=0.8512 mas, bmaj=2.112 mas, bpa=1.136 degrees ! Estimated noise=0.747651 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000912509 Jy ! Component: 100 - total flux cleaned = -0.000942274 Jy ! Component: 150 - total flux cleaned = -0.000993457 Jy ! Component: 200 - total flux cleaned = -0.00103904 Jy ! Total flux subtracted in 200 components = -0.00103904 Jy ! Clean residual min=-0.002573 max=0.002786 Jy/beam ! Clean residual mean=0.000014 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.160743 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 53 components and 0.160743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062661Jy sigma=0.931842 ! Fit after self-cal, rms=0.062680Jy sigma=0.931806 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.439 mas, bmaj=6.248 mas, bpa=5.74 degrees ! Estimated noise=0.96533 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214324 Jy ! Component: 100 - total flux cleaned = -0.000252421 Jy ! Component: 150 - total flux cleaned = -0.000283656 Jy ! Component: 200 - total flux cleaned = -0.000309166 Jy ! Total flux subtracted in 200 components = -0.000309166 Jy ! Clean residual min=-0.002650 max=0.003032 Jy/beam ! Clean residual mean=0.000025 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.160434 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 55 components and 0.160434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062667Jy sigma=0.931756 ! Fit after self-cal, rms=0.062683Jy sigma=0.931693 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6653 mas, bmaj=1.629 mas, bpa=2.504 degrees ! Estimated noise=1.32374 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.123275 Jy ! Component: 100 - total flux cleaned = 0.143957 Jy ! Component: 150 - total flux cleaned = 0.152836 Jy ! Component: 200 - total flux cleaned = 0.1571 Jy ! Total flux subtracted in 200 components = 0.1571 Jy ! Clean residual min=-0.004252 max=0.004668 Jy/beam ! Clean residual mean=0.000005 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 0.1571 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.1571 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8512 mas, bmaj=2.112 mas, bpa=1.136 degrees ! Estimated noise=0.747651 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306581 Jy ! Component: 100 - total flux cleaned = 0.00344783 Jy ! Component: 150 - total flux cleaned = 0.00345401 Jy ! Component: 200 - total flux cleaned = 0.00345863 Jy ! Total flux subtracted in 200 components = 0.00345863 Jy ! Clean residual min=-0.002614 max=0.002794 Jy/beam ! Clean residual mean=0.000014 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.160559 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.160559 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.439 mas, bmaj=6.248 mas, bpa=5.74 degrees ! Estimated noise=0.96533 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -7.06984e-05 Jy ! Component: 100 - total flux cleaned = -6.99671e-05 Jy ! Component: 150 - total flux cleaned = -6.87137e-05 Jy ! Component: 200 - total flux cleaned = -8.90824e-05 Jy ! Total flux subtracted in 200 components = -8.90824e-05 Jy ! Clean residual min=-0.002681 max=0.003019 Jy/beam ! Clean residual mean=0.000025 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.16047 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 30 components and 0.16047 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8512 mas, bmaj=2.112 mas, bpa=1.136 degrees ! Estimated noise=0.747651 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 6.58199e-05 Jy ! Component: 100 - total flux cleaned = 4.15288e-05 Jy ! Component: 150 - total flux cleaned = 3.97866e-05 Jy ! Component: 200 - total flux cleaned = 4.04091e-05 Jy ! Total flux subtracted in 200 components = 4.04091e-05 Jy ! Clean residual min=-0.002592 max=0.002751 Jy/beam ! Clean residual mean=0.000014 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.16051 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.16051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062693Jy sigma=0.931686 ! Fit after self-cal, rms=0.062701Jy sigma=0.931645 wmodel J0628-2805_X_2005_06_30_yyk\_map.mod ! Writing 37 model components to file: J0628-2805_X_2005_06_30_yyk_map.mod wobs J0628-2805_X_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J0628-2805_X_2005_06_30_yyk_uvs.fits wwins J0628-2805_X_2005_06_30_yyk\_map.win ! wwins: Wrote 1 windows to J0628-2805_X_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000828186 Jy ! Component: 100 - total flux cleaned = 0.00120358 Jy ! Component: 150 - total flux cleaned = 0.00133269 Jy ! Component: 200 - total flux cleaned = 0.00145612 Jy ! Component: 250 - total flux cleaned = 0.00153604 Jy ! Component: 300 - total flux cleaned = 0.00157607 Jy ! Component: 350 - total flux cleaned = 0.00165061 Jy ! Component: 400 - total flux cleaned = 0.00165172 Jy ! Component: 450 - total flux cleaned = 0.00154874 Jy ! Component: 500 - total flux cleaned = 0.001447 Jy ! Component: 550 - total flux cleaned = 0.00131492 Jy ! Component: 600 - total flux cleaned = 0.00115382 Jy ! Component: 650 - total flux cleaned = 0.00105947 Jy ! Component: 700 - total flux cleaned = 0.00105936 Jy ! Component: 750 - total flux cleaned = 0.00096825 Jy ! Component: 800 - total flux cleaned = 0.000967839 Jy ! Component: 850 - total flux cleaned = 0.000909139 Jy ! Component: 900 - total flux cleaned = 0.000851644 Jy ! Component: 950 - total flux cleaned = 0.000879701 Jy ! Component: 1000 - total flux cleaned = 0.000935375 Jy ! Component: 1050 - total flux cleaned = 0.00101713 Jy ! Component: 1100 - total flux cleaned = 0.000989788 Jy ! Component: 1150 - total flux cleaned = 0.00101616 Jy ! Component: 1200 - total flux cleaned = 0.00101635 Jy ! Component: 1250 - total flux cleaned = 0.00109328 Jy ! Component: 1300 - total flux cleaned = 0.00106787 Jy ! Component: 1350 - total flux cleaned = 0.00109335 Jy ! Component: 1400 - total flux cleaned = 0.00106939 Jy ! Component: 1450 - total flux cleaned = 0.00116606 Jy ! Component: 1500 - total flux cleaned = 0.0011179 Jy ! Component: 1550 - total flux cleaned = 0.00111806 Jy ! Component: 1600 - total flux cleaned = 0.00121121 Jy ! Component: 1650 - total flux cleaned = 0.0011883 Jy ! Component: 1700 - total flux cleaned = 0.00123334 Jy ! Component: 1750 - total flux cleaned = 0.00121058 Jy ! Component: 1800 - total flux cleaned = 0.00118819 Jy ! Component: 1850 - total flux cleaned = 0.00121056 Jy ! Component: 1900 - total flux cleaned = 0.00123164 Jy ! Component: 1950 - total flux cleaned = 0.00125289 Jy ! Component: 2000 - total flux cleaned = 0.00121082 Jy ! Total flux subtracted in 2048 components = 0.00125249 Jy ! Clean residual min=-0.001305 max=0.001177 Jy/beam ! Clean residual mean=0.000006 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.161763 Jy keep ! Adding 143 model components to the UV plane model. ! The established model now contains 180 components and 0.161763 Jy ![Exited script file: muppet] wmap "J0628-2805_X_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8512 x 2.112 at 1.136 degrees (North through East) ! Clean map min=-0.0020128 max=0.14726 Jy/beam ! Writing clean map to FITS file: J0628-2805_X_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.147257 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000389477 device "J0628-2805_X_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0628-2805_X_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.793465 0.793465 1.58693 3.17386 6.34772 12.6954 25.3909 50.7817 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.147 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8512 x 2.112 at 1.136 degrees (North through East) ! Clean map min=-0.0020128 max=0.14726 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0628-2805_X_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0628-2805_X_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0628-2805_X_2005_06_30_yyk_uvs.log closed on Sat Oct 8 17:03:14 2005