! Started logfile: J0617-2200_S_2005_06_30_yyk_uvs.log on Sat Oct  8 17:02:15 2005
obs J0617-2200_S_2005_06_30_yyk_uve.fits
! Reading UV FITS file: J0617-2200_S_2005_06_30_yyk_uve.fits
! AN table 1: 10 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.922222 visibilities/baseline/integration-bin.
! Found source: J0617-2200
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1468 lines of history.
! 
! Reading 1660 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0617-2200_S_2005_06_30_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.233241 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.562 mas, bmaj=6.147 mas, bpa=3.03 degrees
! Estimated noise=1.61063 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.176693 Jy
! Component: 100  -  total flux cleaned = 0.205905 Jy
! Total flux subtracted in 100 components = 0.205905 Jy
! Clean residual min=-0.008358 max=0.010439 Jy/beam
! Clean residual mean=-0.000002 rms=0.002515 Jy/beam
! Combined flux in latest and established models = 0.205905 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.205905 Jy
! 
! Correcting IF 1.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.093041Jy  sigma=1.236806
! Fit after  self-cal, rms=0.092826Jy  sigma=1.231536
! Inverting map and beam 
! Estimated beam: bmin=2.562 mas, bmaj=6.147 mas, bpa=3.03 degrees
! Estimated noise=1.61063 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.144 mas, bmaj=7.604 mas, bpa=-1.145 degrees
! Estimated noise=1.21964 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123574 Jy
! Component: 100  -  total flux cleaned = 0.017115 Jy
! Component: 150  -  total flux cleaned = 0.0183957 Jy
! Component: 200  -  total flux cleaned = 0.0186287 Jy
! Total flux subtracted in 200 components = 0.0186287 Jy
! Clean residual min=-0.008991 max=0.009040 Jy/beam
! Clean residual mean=-0.000027 rms=0.002787 Jy/beam
! Combined flux in latest and established models = 0.224534 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 31 components and 0.224534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090780Jy  sigma=1.210463
! Fit after  self-cal, rms=0.090755Jy  sigma=1.210301
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.144 x 7.604 at -1.145 degrees (North through East)
! Clean map  min=-0.0087437  max=0.19947 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.0271
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.00*    KP        0.92     
!   LA        1.03     MK        0.93     NL        0.96     OV        0.97     
!   PT        1.03     SC        0.94     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.986945
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        0.95     HN        1.00*    KP        1.12     
!   LA        0.97     MK        0.93     NL        0.98     OV        1.03     
!   PT        1.06     SC        0.92     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.090755Jy  sigma=1.210301
! Fit after  self-cal, rms=0.090172Jy  sigma=1.190724
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090172Jy  sigma=1.190724
! Fit after  self-cal, rms=0.090182Jy  sigma=1.190699
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.066 mas, bmaj=7.481 mas, bpa=-1.252 degrees
! Estimated noise=1.2229 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00456451 Jy
! Component: 100  -  total flux cleaned = 0.00514842 Jy
! Component: 150  -  total flux cleaned = 0.00564209 Jy
! Component: 200  -  total flux cleaned = 0.00607401 Jy
! Total flux subtracted in 200 components = 0.00607401 Jy
! Clean residual min=-0.007793 max=0.008102 Jy/beam
! Clean residual mean=0.000009 rms=0.002193 Jy/beam
! Combined flux in latest and established models = 0.230608 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 42 components and 0.230608 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089738Jy  sigma=1.186676
! Fit after  self-cal, rms=0.089724Jy  sigma=1.186605
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089724Jy  sigma=1.186605
! Fit after  self-cal, rms=0.086306Jy  sigma=1.143418
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00161906 Jy
! Component: 100  -  total flux cleaned = 0.00181536 Jy
! Component: 150  -  total flux cleaned = 0.00190702 Jy
! Component: 200  -  total flux cleaned = 0.00203914 Jy
! Total flux subtracted in 200 components = 0.00203914 Jy
! Clean residual min=-0.007816 max=0.007848 Jy/beam
! Clean residual mean=0.000004 rms=0.002176 Jy/beam
! Combined flux in latest and established models = 0.232647 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 44 components and 0.232647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086168Jy  sigma=1.142564
! Fit after  self-cal, rms=0.086128Jy  sigma=1.138745
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.066 x 7.481 at -1.252 degrees (North through East)
! Clean map  min=-0.0075908  max=0.19825 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086128Jy  sigma=1.138745
! Fit after  self-cal, rms=0.085042Jy  sigma=1.133815
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085042Jy  sigma=1.133815
! Fit after  self-cal, rms=0.085194Jy  sigma=1.133339
! Inverting map and beam 
! Estimated beam: bmin=3.038 mas, bmaj=7.413 mas, bpa=-0.6332 degrees
! Estimated noise=1.21533 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000460943 Jy
! Component: 100  -  total flux cleaned = 0.000917942 Jy
! Component: 150  -  total flux cleaned = 0.00131938 Jy
! Component: 200  -  total flux cleaned = 0.00155661 Jy
! Total flux subtracted in 200 components = 0.00155661 Jy
! Clean residual min=-0.008051 max=0.008291 Jy/beam
! Clean residual mean=0.000009 rms=0.002454 Jy/beam
! Combined flux in latest and established models = 0.234203 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 48 components and 0.234203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085150Jy  sigma=1.131708
! Fit after  self-cal, rms=0.085238Jy  sigma=1.131639
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085238Jy  sigma=1.131639
! Fit after  self-cal, rms=0.082970Jy  sigma=1.115945
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082970Jy  sigma=1.115945
! Fit after  self-cal, rms=0.083001Jy  sigma=1.115882
! Inverting map and beam 
! Estimated beam: bmin=3.037 mas, bmaj=7.43 mas, bpa=-0.4364 degrees
! Estimated noise=1.20734 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00100923 Jy
! Component: 100  -  total flux cleaned = -0.000898992 Jy
! Component: 150  -  total flux cleaned = -0.000747651 Jy
! Component: 200  -  total flux cleaned = -0.000654283 Jy
! Total flux subtracted in 200 components = -0.000654283 Jy
! Clean residual min=-0.007896 max=0.008015 Jy/beam
! Clean residual mean=0.000025 rms=0.002418 Jy/beam
! Combined flux in latest and established models = 0.233549 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 51 components and 0.233549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083065Jy  sigma=1.114853
! Fit after  self-cal, rms=0.083083Jy  sigma=1.114835
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.664 mas, bmaj=17.63 mas, bpa=8.417 degrees
! Estimated noise=1.57158 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137997 Jy
! Component: 100  -  total flux cleaned = 0.00177101 Jy
! Component: 150  -  total flux cleaned = 0.00199424 Jy
! Component: 200  -  total flux cleaned = 0.00219647 Jy
! Total flux subtracted in 200 components = 0.00219647 Jy
! Clean residual min=-0.009868 max=0.009585 Jy/beam
! Clean residual mean=0.000050 rms=0.003666 Jy/beam
! Combined flux in latest and established models = 0.235746 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 56 components and 0.235746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083237Jy  sigma=1.117067
! Fit after  self-cal, rms=0.083225Jy  sigma=1.116603
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.511 mas, bmaj=6.117 mas, bpa=3.563 degrees
! Estimated noise=1.51737 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.172154 Jy
! Component: 100  -  total flux cleaned = 0.20386 Jy
! Component: 150  -  total flux cleaned = 0.218626 Jy
! Component: 200  -  total flux cleaned = 0.226811 Jy
! Total flux subtracted in 200 components = 0.226811 Jy
! Clean residual min=-0.006521 max=0.007585 Jy/beam
! Clean residual mean=0.000011 rms=0.001941 Jy/beam
! Combined flux in latest and established models = 0.226811 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 43 model components to the UV plane model.
! The established model now contains 43 components and 0.226811 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.037 mas, bmaj=7.43 mas, bpa=-0.4364 degrees
! Estimated noise=1.20734 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00371017 Jy
! Component: 100  -  total flux cleaned = 0.00430707 Jy
! Component: 150  -  total flux cleaned = 0.00463804 Jy
! Component: 200  -  total flux cleaned = 0.00478656 Jy
! Total flux subtracted in 200 components = 0.00478656 Jy
! Clean residual min=-0.008145 max=0.008568 Jy/beam
! Clean residual mean=0.000030 rms=0.002504 Jy/beam
! Combined flux in latest and established models = 0.231598 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 53 components and 0.231598 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.664 mas, bmaj=17.63 mas, bpa=8.417 degrees
! Estimated noise=1.57158 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00190768 Jy
! Component: 100  -  total flux cleaned = 0.00235688 Jy
! Component: 150  -  total flux cleaned = 0.00263495 Jy
! Component: 200  -  total flux cleaned = 0.00300889 Jy
! Total flux subtracted in 200 components = 0.00300889 Jy
! Clean residual min=-0.010158 max=0.010333 Jy/beam
! Clean residual mean=0.000056 rms=0.003811 Jy/beam
! Combined flux in latest and established models = 0.234607 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 59 components and 0.234607 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.037 mas, bmaj=7.43 mas, bpa=-0.4364 degrees
! Estimated noise=1.20734 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0010334 Jy
! Component: 100  -  total flux cleaned = -0.00103143 Jy
! Component: 150  -  total flux cleaned = -0.000948909 Jy
! Component: 200  -  total flux cleaned = -0.000883468 Jy
! Total flux subtracted in 200 components = -0.000883468 Jy
! Clean residual min=-0.008016 max=0.007831 Jy/beam
! Clean residual mean=0.000024 rms=0.002409 Jy/beam
! Combined flux in latest and established models = 0.233723 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 65 components and 0.233723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082979Jy  sigma=1.113685
! Fit after  self-cal, rms=0.082962Jy  sigma=1.113628
wmodel J0617-2200_S_2005_06_30_yyk\_map.mod
! Writing 65 model components to file: J0617-2200_S_2005_06_30_yyk_map.mod
wobs J0617-2200_S_2005_06_30_yyk\_uvs.fits
! Writing UV FITS file: J0617-2200_S_2005_06_30_yyk_uvs.fits
wwins J0617-2200_S_2005_06_30_yyk\_map.win
! wwins: Wrote 1 windows to J0617-2200_S_2005_06_30_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000331338 Jy
! Component: 100  -  total flux cleaned = -0.000326046 Jy
! Component: 150  -  total flux cleaned = -0.000322771 Jy
! Component: 200  -  total flux cleaned = -0.000891336 Jy
! Component: 250  -  total flux cleaned = -0.00154335 Jy
! Component: 300  -  total flux cleaned = -0.00165025 Jy
! Component: 350  -  total flux cleaned = -0.00204253 Jy
! Component: 400  -  total flux cleaned = -0.00203925 Jy
! Component: 450  -  total flux cleaned = -0.00204062 Jy
! Component: 500  -  total flux cleaned = -0.00230611 Jy
! Component: 550  -  total flux cleaned = -0.00221908 Jy
! Component: 600  -  total flux cleaned = -0.00238816 Jy
! Component: 650  -  total flux cleaned = -0.00255138 Jy
! Component: 700  -  total flux cleaned = -0.0027103 Jy
! Component: 750  -  total flux cleaned = -0.00270956 Jy
! Component: 800  -  total flux cleaned = -0.00270991 Jy
! Component: 850  -  total flux cleaned = -0.0026395 Jy
! Component: 900  -  total flux cleaned = -0.00263868 Jy
! Component: 950  -  total flux cleaned = -0.00243415 Jy
! Component: 1000  -  total flux cleaned = -0.00223447 Jy
! Component: 1050  -  total flux cleaned = -0.00210582 Jy
! Component: 1100  -  total flux cleaned = -0.00172246 Jy
! Component: 1150  -  total flux cleaned = -0.00141136 Jy
! Component: 1200  -  total flux cleaned = -0.00110725 Jy
! Component: 1250  -  total flux cleaned = -0.000869478 Jy
! Component: 1300  -  total flux cleaned = -0.000639104 Jy
! Component: 1350  -  total flux cleaned = -0.000639212 Jy
! Component: 1400  -  total flux cleaned = -0.000637663 Jy
! Component: 1450  -  total flux cleaned = -0.000581889 Jy
! Component: 1500  -  total flux cleaned = -0.000474218 Jy
! Component: 1550  -  total flux cleaned = -0.000421074 Jy
! Component: 1600  -  total flux cleaned = -0.000318225 Jy
! Component: 1650  -  total flux cleaned = -0.000217053 Jy
! Component: 1700  -  total flux cleaned = -0.000167301 Jy
! Component: 1750  -  total flux cleaned = -0.000166721 Jy
! Component: 1800  -  total flux cleaned = 2.58715e-05 Jy
! Component: 1850  -  total flux cleaned = 7.31939e-05 Jy
! Component: 1900  -  total flux cleaned = 0.000165979 Jy
! Component: 1950  -  total flux cleaned = 0.000258504 Jy
! Component: 2000  -  total flux cleaned = 0.000348509 Jy
! Total flux subtracted in 2048 components = 0.000348276 Jy
! Clean residual min=-0.002635 max=0.002996 Jy/beam
! Clean residual mean=0.000040 rms=0.000950 Jy/beam
! Combined flux in latest and established models = 0.234072 Jy
keep
! Adding 157 model components to the UV plane model.
! The established model now contains 222 components and 0.234072 Jy
![Exited script file: muppet]
wmap "J0617-2200_S_2005_06_30_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.037 x 7.43 at -0.4364 degrees (North through East)
! Clean map  min=-0.0047574  max=0.19278 Jy/beam
! Writing clean map to FITS file: J0617-2200_S_2005_06_30_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.192775 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000943918 
device "J0617-2200_S_2005_06_30_yyk\_map.eps/VPS"
! Attempting to open device: 'J0617-2200_S_2005_06_30_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.46894 1.46894 2.93788 5.87576 11.7515 23.503 47.0061 94.0121
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0028 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.192 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.037 x 7.43 at -0.4364 degrees (North through East)
! Clean map  min=-0.0047574  max=0.19278 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0617-2200_S_2005_06_30_yyk\_map.gif/gif"
! Attempting to open device: 'J0617-2200_S_2005_06_30_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0617-2200_S_2005_06_30_yyk_uvs.log closed on Sat Oct  8 17:02:19 2005