! Started logfile: J0616-1041_S_2005_06_30_yyk_uvs.log on Sat Oct 8 17:01:56 2005 obs J0616-1041_S_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J0616-1041_S_2005_06_30_yyk_uve.fits ! AN table 1: 9 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.891358 visibilities/baseline/integration-bin. ! Found source: J0616-1041 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1469 lines of history. ! ! Reading 1444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0616-1041_S_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.137323 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.707 mas, bmaj=7.219 mas, bpa=-6.893 degrees ! Estimated noise=1.56697 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0869581 Jy ! Component: 100 - total flux cleaned = 0.114452 Jy ! Total flux subtracted in 100 components = 0.114452 Jy ! Clean residual min=-0.007326 max=0.009761 Jy/beam ! Clean residual mean=0.000117 rms=0.002193 Jy/beam ! Combined flux in latest and established models = 0.114452 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.114452 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.084091Jy sigma=1.153725 ! Fit after self-cal, rms=0.081979Jy sigma=1.113670 ! Inverting map and beam ! Estimated beam: bmin=2.707 mas, bmaj=7.219 mas, bpa=-6.893 degrees ! Estimated noise=1.56697 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.411 mas, bmaj=9.239 mas, bpa=-9.506 degrees ! Estimated noise=1.14824 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177196 Jy ! Component: 100 - total flux cleaned = 0.0239387 Jy ! Component: 150 - total flux cleaned = 0.0267054 Jy ! Component: 200 - total flux cleaned = 0.0278803 Jy ! Total flux subtracted in 200 components = 0.0278803 Jy ! Clean residual min=-0.005329 max=0.004358 Jy/beam ! Clean residual mean=-0.000009 rms=0.001301 Jy/beam ! Combined flux in latest and established models = 0.142332 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 59 model components to the UV plane model. ! The established model now contains 74 components and 0.142332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079568Jy sigma=1.062192 ! Fit after self-cal, rms=0.079583Jy sigma=1.062097 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.411 x 9.239 at -9.506 degrees (North through East) ! Clean map min=-0.0051627 max=0.10822 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00456 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.05 HN 1.04 KP 0.99 ! LA 1.09 MK 0.93 NL 0.94 OV 1.02 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.976389 ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.94 HN 1.11 KP 1.06 ! LA 0.95 MK 0.96 NL 0.96 OV 1.05 ! PT 1.08 SC 0.96 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.079583Jy sigma=1.062097 ! Fit after self-cal, rms=0.078595Jy sigma=1.053293 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078595Jy sigma=1.053293 ! Fit after self-cal, rms=0.078587Jy sigma=1.053222 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.33 mas, bmaj=9.119 mas, bpa=-9.576 degrees ! Estimated noise=1.14602 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186099 Jy ! Component: 100 - total flux cleaned = 0.00205218 Jy ! Component: 150 - total flux cleaned = 0.00209225 Jy ! Component: 200 - total flux cleaned = 0.00209547 Jy ! Total flux subtracted in 200 components = 0.00209547 Jy ! Clean residual min=-0.005313 max=0.004619 Jy/beam ! Clean residual mean=-0.000003 rms=0.001284 Jy/beam ! Combined flux in latest and established models = 0.144428 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 84 components and 0.144428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078440Jy sigma=1.052185 ! Fit after self-cal, rms=0.078442Jy sigma=1.052117 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078442Jy sigma=1.052117 ! Fit after self-cal, rms=0.075191Jy sigma=1.000567 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131782 Jy ! Component: 100 - total flux cleaned = 0.00140446 Jy ! Component: 150 - total flux cleaned = 0.00142999 Jy ! Component: 200 - total flux cleaned = 0.00141036 Jy ! Total flux subtracted in 200 components = 0.00141036 Jy ! Clean residual min=-0.004890 max=0.004578 Jy/beam ! Clean residual mean=-0.000002 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 0.145838 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 91 components and 0.145838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075183Jy sigma=1.000066 ! Fit after self-cal, rms=0.074993Jy sigma=0.997044 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.33 x 9.119 at -9.576 degrees (North through East) ! Clean map min=-0.0046444 max=0.10967 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074993Jy sigma=0.997044 ! Fit after self-cal, rms=0.074546Jy sigma=0.991244 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074546Jy sigma=0.991244 ! Fit after self-cal, rms=0.074532Jy sigma=0.990956 ! Inverting map and beam ! Estimated beam: bmin=3.268 mas, bmaj=8.834 mas, bpa=-8.349 degrees ! Estimated noise=1.14133 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165239 Jy ! Component: 100 - total flux cleaned = 0.00169602 Jy ! Component: 150 - total flux cleaned = 0.00172381 Jy ! Component: 200 - total flux cleaned = 0.00176497 Jy ! Total flux subtracted in 200 components = 0.00176497 Jy ! Clean residual min=-0.004549 max=0.004487 Jy/beam ! Clean residual mean=0.000012 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.147603 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 100 components and 0.147603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074476Jy sigma=0.990304 ! Fit after self-cal, rms=0.074470Jy sigma=0.990277 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074470Jy sigma=0.990277 ! Fit after self-cal, rms=0.074249Jy sigma=0.991785 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074249Jy sigma=0.991785 ! Fit after self-cal, rms=0.074249Jy sigma=0.991750 ! Inverting map and beam ! Estimated beam: bmin=3.232 mas, bmaj=8.675 mas, bpa=-8.077 degrees ! Estimated noise=1.14079 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110963 Jy ! Component: 100 - total flux cleaned = 0.00132156 Jy ! Component: 150 - total flux cleaned = 0.00149684 Jy ! Component: 200 - total flux cleaned = 0.00162418 Jy ! Total flux subtracted in 200 components = 0.00162418 Jy ! Clean residual min=-0.004626 max=0.004658 Jy/beam ! Clean residual mean=0.000010 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.149227 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 107 components and 0.149227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074202Jy sigma=0.991355 ! Fit after self-cal, rms=0.074199Jy sigma=0.991348 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.087 mas, bmaj=14.55 mas, bpa=2.325 degrees ! Estimated noise=1.42825 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000404499 Jy ! Component: 100 - total flux cleaned = 0.000444283 Jy ! Component: 150 - total flux cleaned = 0.000469956 Jy ! Component: 200 - total flux cleaned = 0.000506057 Jy ! Total flux subtracted in 200 components = 0.000506057 Jy ! Clean residual min=-0.004721 max=0.004790 Jy/beam ! Clean residual mean=0.000021 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.149733 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 110 components and 0.149733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074186Jy sigma=0.991312 ! Fit after self-cal, rms=0.074183Jy sigma=0.991306 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.654 mas, bmaj=7.077 mas, bpa=-6.362 degrees ! Estimated noise=1.53468 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0900207 Jy ! Component: 100 - total flux cleaned = 0.119268 Jy ! Component: 150 - total flux cleaned = 0.13343 Jy ! Component: 200 - total flux cleaned = 0.140914 Jy ! Total flux subtracted in 200 components = 0.140914 Jy ! Clean residual min=-0.005419 max=0.006491 Jy/beam ! Clean residual mean=0.000046 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 0.140914 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.140914 Jy ! Inverting map and beam ! Estimated beam: bmin=3.232 mas, bmaj=8.675 mas, bpa=-8.077 degrees ! Estimated noise=1.14079 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00526626 Jy ! Component: 100 - total flux cleaned = 0.00741556 Jy ! Component: 150 - total flux cleaned = 0.00823732 Jy ! Component: 200 - total flux cleaned = 0.00835189 Jy ! Total flux subtracted in 200 components = 0.00835189 Jy ! Clean residual min=-0.004430 max=0.004811 Jy/beam ! Clean residual mean=0.000010 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 0.149266 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 72 components and 0.149266 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.087 mas, bmaj=14.55 mas, bpa=2.325 degrees ! Estimated noise=1.42825 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000561961 Jy ! Component: 100 - total flux cleaned = 0.000547682 Jy ! Component: 150 - total flux cleaned = 0.000535399 Jy ! Component: 200 - total flux cleaned = 0.000546675 Jy ! Total flux subtracted in 200 components = 0.000546675 Jy ! Clean residual min=-0.004728 max=0.004855 Jy/beam ! Clean residual mean=0.000020 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.149812 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 82 components and 0.149812 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.232 mas, bmaj=8.675 mas, bpa=-8.077 degrees ! Estimated noise=1.14079 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000231613 Jy ! Component: 100 - total flux cleaned = -0.000231885 Jy ! Component: 150 - total flux cleaned = -0.000232269 Jy ! Component: 200 - total flux cleaned = -0.000255041 Jy ! Total flux subtracted in 200 components = -0.000255041 Jy ! Clean residual min=-0.004477 max=0.004690 Jy/beam ! Clean residual mean=0.000008 rms=0.001227 Jy/beam ! Combined flux in latest and established models = 0.149557 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 86 components and 0.149557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074114Jy sigma=0.991506 ! Fit after self-cal, rms=0.074095Jy sigma=0.991431 wmodel J0616-1041_S_2005_06_30_yyk\_map.mod ! Writing 86 model components to file: J0616-1041_S_2005_06_30_yyk_map.mod wobs J0616-1041_S_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J0616-1041_S_2005_06_30_yyk_uvs.fits wwins J0616-1041_S_2005_06_30_yyk\_map.win ! wwins: Wrote 1 windows to J0616-1041_S_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00039519 Jy ! Component: 100 - total flux cleaned = -0.00100115 Jy ! Component: 150 - total flux cleaned = -0.00100315 Jy ! Component: 200 - total flux cleaned = -0.000672671 Jy ! Component: 250 - total flux cleaned = -0.000736888 Jy ! Component: 300 - total flux cleaned = -0.000737594 Jy ! Component: 350 - total flux cleaned = -0.000915159 Jy ! Component: 400 - total flux cleaned = -0.00114439 Jy ! Component: 450 - total flux cleaned = -0.00125673 Jy ! Component: 500 - total flux cleaned = -0.00136585 Jy ! Component: 550 - total flux cleaned = -0.00147292 Jy ! Component: 600 - total flux cleaned = -0.00173396 Jy ! Component: 650 - total flux cleaned = -0.00168258 Jy ! Component: 700 - total flux cleaned = -0.00173345 Jy ! Component: 750 - total flux cleaned = -0.00188147 Jy ! Component: 800 - total flux cleaned = -0.00183396 Jy ! Component: 850 - total flux cleaned = -0.00197678 Jy ! Component: 900 - total flux cleaned = -0.00197753 Jy ! Component: 950 - total flux cleaned = -0.00211484 Jy ! Component: 1000 - total flux cleaned = -0.00206901 Jy ! Component: 1050 - total flux cleaned = -0.00198052 Jy ! Component: 1100 - total flux cleaned = -0.00206831 Jy ! Component: 1150 - total flux cleaned = -0.00202537 Jy ! Component: 1200 - total flux cleaned = -0.00198343 Jy ! Component: 1250 - total flux cleaned = -0.00198415 Jy ! Component: 1300 - total flux cleaned = -0.00206703 Jy ! Component: 1350 - total flux cleaned = -0.00198572 Jy ! Component: 1400 - total flux cleaned = -0.00198576 Jy ! Component: 1450 - total flux cleaned = -0.00182888 Jy ! Component: 1500 - total flux cleaned = -0.00179022 Jy ! Component: 1550 - total flux cleaned = -0.00163609 Jy ! Component: 1600 - total flux cleaned = -0.00152162 Jy ! Component: 1650 - total flux cleaned = -0.00129604 Jy ! Component: 1700 - total flux cleaned = -0.00118498 Jy ! Component: 1750 - total flux cleaned = -0.00103883 Jy ! Component: 1800 - total flux cleaned = -0.000966217 Jy ! Component: 1850 - total flux cleaned = -0.000822582 Jy ! Component: 1900 - total flux cleaned = -0.000609882 Jy ! Component: 1950 - total flux cleaned = -0.000575081 Jy ! Component: 2000 - total flux cleaned = -0.000505762 Jy ! Total flux subtracted in 2048 components = -0.000471378 Jy ! Clean residual min=-0.002103 max=0.002185 Jy/beam ! Clean residual mean=-0.000015 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.149086 Jy keep ! Adding 124 model components to the UV plane model. ! The established model now contains 210 components and 0.149086 Jy ![Exited script file: muppet] wmap "J0616-1041_S_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.232 x 8.675 at -8.077 degrees (North through East) ! Clean map min=-0.0042639 max=0.10757 Jy/beam ! Writing clean map to FITS file: J0616-1041_S_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.107572 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000707124 device "J0616-1041_S_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0616-1041_S_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.97205 1.97205 3.9441 7.88821 15.7764 31.5528 63.1057 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.107 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.232 x 8.675 at -8.077 degrees (North through East) ! Clean map min=-0.0042639 max=0.10757 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0616-1041_S_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0616-1041_S_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0616-1041_S_2005_06_30_yyk_uvs.log closed on Sat Oct 8 17:02:00 2005