! Started logfile: J0610-1847_S_2005_06_30_yyk_uvs.log on Sat Oct 8 17:01:39 2005 obs J0610-1847_S_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J0610-1847_S_2005_06_30_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.913333 visibilities/baseline/integration-bin. ! Found source: J0610-1847 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1469 lines of history. ! ! Reading 1644 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0610-1847_S_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.133855 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.815 mas, bmaj=6.839 mas, bpa=-1.636 degrees ! Estimated noise=2.54611 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0716162 Jy ! Component: 100 - total flux cleaned = 0.0946782 Jy ! Total flux subtracted in 100 components = 0.0946782 Jy ! Clean residual min=-0.009617 max=0.012227 Jy/beam ! Clean residual mean=0.000039 rms=0.002944 Jy/beam ! Combined flux in latest and established models = 0.0946782 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0946782 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.098546Jy sigma=1.506785 ! Fit after self-cal, rms=0.090740Jy sigma=1.348672 ! Inverting map and beam ! Estimated beam: bmin=2.815 mas, bmaj=6.839 mas, bpa=-1.636 degrees ! Estimated noise=2.54611 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.563 mas, bmaj=10.85 mas, bpa=-5.385 degrees ! Estimated noise=1.39591 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0251095 Jy ! Component: 100 - total flux cleaned = 0.0295237 Jy ! Component: 150 - total flux cleaned = 0.0299166 Jy ! Component: 200 - total flux cleaned = 0.0296857 Jy ! Total flux subtracted in 200 components = 0.0296857 Jy ! Clean residual min=-0.014610 max=0.015529 Jy/beam ! Clean residual mean=-0.000284 rms=0.006819 Jy/beam ! Combined flux in latest and established models = 0.124364 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 47 components and 0.124364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088878Jy sigma=1.267209 ! Fit after self-cal, rms=0.088887Jy sigma=1.266984 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.563 x 10.85 at -5.385 degrees (North through East) ! Clean map min=-0.014495 max=0.10916 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.088887Jy sigma=1.266984 ! Fit after self-cal, rms=0.088887Jy sigma=1.266984 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088887Jy sigma=1.266984 ! Fit after self-cal, rms=0.088887Jy sigma=1.266984 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.563 mas, bmaj=10.85 mas, bpa=-5.385 degrees ! Estimated noise=1.39591 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105138 Jy ! Component: 100 - total flux cleaned = -0.000316854 Jy ! Component: 150 - total flux cleaned = -0.000418042 Jy ! Component: 200 - total flux cleaned = -0.000519926 Jy ! Total flux subtracted in 200 components = -0.000519926 Jy ! Clean residual min=-0.014542 max=0.015151 Jy/beam ! Clean residual mean=-0.000281 rms=0.006759 Jy/beam ! Combined flux in latest and established models = 0.123844 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 0.123844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088806Jy sigma=1.264302 ! Fit after self-cal, rms=0.088803Jy sigma=1.264258 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088803Jy sigma=1.264258 ! Fit after self-cal, rms=0.083419Jy sigma=1.199755 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219406 Jy ! Component: 100 - total flux cleaned = 0.00200573 Jy ! Component: 150 - total flux cleaned = 0.00200946 Jy ! Component: 200 - total flux cleaned = 0.00192421 Jy ! Total flux subtracted in 200 components = 0.00192421 Jy ! Clean residual min=-0.013963 max=0.014827 Jy/beam ! Clean residual mean=-0.000278 rms=0.006686 Jy/beam ! Combined flux in latest and established models = 0.125768 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.125768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083506Jy sigma=1.196305 ! Fit after self-cal, rms=0.083314Jy sigma=1.193102 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.563 x 10.85 at -5.385 degrees (North through East) ! Clean map min=-0.013712 max=0.11393 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083314Jy sigma=1.193102 ! Fit after self-cal, rms=0.083314Jy sigma=1.193102 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083314Jy sigma=1.193102 ! Fit after self-cal, rms=0.083341Jy sigma=1.192864 ! Inverting map and beam ! Estimated beam: bmin=4.563 mas, bmaj=10.85 mas, bpa=-5.385 degrees ! Estimated noise=1.39591 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -1.61877e-06 Jy ! Component: 100 - total flux cleaned = -0.000157074 Jy ! Component: 150 - total flux cleaned = -0.000234241 Jy ! Component: 200 - total flux cleaned = -0.000373201 Jy ! Total flux subtracted in 200 components = -0.000373201 Jy ! Clean residual min=-0.013740 max=0.014666 Jy/beam ! Clean residual mean=-0.000276 rms=0.006648 Jy/beam ! Combined flux in latest and established models = 0.125395 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.125395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083348Jy sigma=1.191375 ! Fit after self-cal, rms=0.083355Jy sigma=1.191291 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083355Jy sigma=1.191291 ! Fit after self-cal, rms=0.083355Jy sigma=1.191291 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083355Jy sigma=1.191291 ! Fit after self-cal, rms=0.083362Jy sigma=1.191287 ! Inverting map and beam ! Estimated beam: bmin=4.563 mas, bmaj=10.85 mas, bpa=-5.385 degrees ! Estimated noise=1.39591 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -7.79096e-05 Jy ! Component: 100 - total flux cleaned = -0.000209358 Jy ! Component: 150 - total flux cleaned = -0.000272197 Jy ! Component: 200 - total flux cleaned = -0.00038593 Jy ! Total flux subtracted in 200 components = -0.00038593 Jy ! Clean residual min=-0.013605 max=0.014603 Jy/beam ! Clean residual mean=-0.000274 rms=0.006619 Jy/beam ! Combined flux in latest and established models = 0.125009 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 61 components and 0.125009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083371Jy sigma=1.190180 ! Fit after self-cal, rms=0.083367Jy sigma=1.190126 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.31 mas, bmaj=19.5 mas, bpa=0.9194 degrees ! Estimated noise=1.55541 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000572807 Jy ! Component: 100 - total flux cleaned = 0.000434875 Jy ! Component: 150 - total flux cleaned = 0.000305214 Jy ! Component: 200 - total flux cleaned = 0.00018135 Jy ! Total flux subtracted in 200 components = 0.00018135 Jy ! Clean residual min=-0.016891 max=0.016450 Jy/beam ! Clean residual mean=-0.000382 rms=0.008695 Jy/beam ! Combined flux in latest and established models = 0.12519 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 69 components and 0.12519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083709Jy sigma=1.189966 ! Fit after self-cal, rms=0.083715Jy sigma=1.189881 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.815 mas, bmaj=6.839 mas, bpa=-1.636 degrees ! Estimated noise=2.54611 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0836215 Jy ! Component: 100 - total flux cleaned = 0.105141 Jy ! Component: 150 - total flux cleaned = 0.114102 Jy ! Component: 200 - total flux cleaned = 0.11786 Jy ! Total flux subtracted in 200 components = 0.11786 Jy ! Clean residual min=-0.009636 max=0.010641 Jy/beam ! Clean residual mean=-0.000069 rms=0.002467 Jy/beam ! Combined flux in latest and established models = 0.11786 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.11786 Jy ! Inverting map and beam ! Estimated beam: bmin=4.563 mas, bmaj=10.85 mas, bpa=-5.385 degrees ! Estimated noise=1.39591 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0085913 Jy ! Component: 100 - total flux cleaned = 0.00902747 Jy ! Component: 150 - total flux cleaned = 0.00878835 Jy ! Component: 200 - total flux cleaned = 0.00867551 Jy ! Total flux subtracted in 200 components = 0.00867551 Jy ! Clean residual min=-0.014292 max=0.015124 Jy/beam ! Clean residual mean=-0.000281 rms=0.006751 Jy/beam ! Combined flux in latest and established models = 0.126536 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 55 components and 0.126536 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.31 mas, bmaj=19.5 mas, bpa=0.9194 degrees ! Estimated noise=1.55541 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000461761 Jy ! Component: 100 - total flux cleaned = 0.000292951 Jy ! Component: 150 - total flux cleaned = 0.000134742 Jy ! Component: 200 - total flux cleaned = -1.12218e-05 Jy ! Total flux subtracted in 200 components = -1.12218e-05 Jy ! Clean residual min=-0.017485 max=0.016720 Jy/beam ! Clean residual mean=-0.000392 rms=0.008848 Jy/beam ! Combined flux in latest and established models = 0.126525 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 59 components and 0.126525 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.563 mas, bmaj=10.85 mas, bpa=-5.385 degrees ! Estimated noise=1.39591 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000909495 Jy ! Component: 100 - total flux cleaned = -0.00101767 Jy ! Component: 150 - total flux cleaned = -0.00120713 Jy ! Component: 200 - total flux cleaned = -0.00129714 Jy ! Total flux subtracted in 200 components = -0.00129714 Jy ! Clean residual min=-0.013761 max=0.014654 Jy/beam ! Clean residual mean=-0.000274 rms=0.006601 Jy/beam ! Combined flux in latest and established models = 0.125228 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 64 components and 0.125228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083499Jy sigma=1.190135 ! Fit after self-cal, rms=0.083450Jy sigma=1.189905 wmodel J0610-1847_S_2005_06_30_yyk\_map.mod ! Writing 64 model components to file: J0610-1847_S_2005_06_30_yyk_map.mod wobs J0610-1847_S_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J0610-1847_S_2005_06_30_yyk_uvs.fits wwins J0610-1847_S_2005_06_30_yyk\_map.win ! wwins: Wrote 1 windows to J0610-1847_S_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123373 Jy ! Component: 100 - total flux cleaned = -0.00105831 Jy ! Component: 150 - total flux cleaned = -0.00150829 Jy ! Component: 200 - total flux cleaned = -0.00129355 Jy ! Component: 250 - total flux cleaned = -0.00108395 Jy ! Component: 300 - total flux cleaned = -0.000509145 Jy ! Component: 350 - total flux cleaned = -0.000513129 Jy ! Component: 400 - total flux cleaned = 0.00104229 Jy ! Component: 450 - total flux cleaned = 0.00187201 Jy ! Component: 500 - total flux cleaned = 0.0033091 Jy ! Component: 550 - total flux cleaned = 0.00438519 Jy ! Component: 600 - total flux cleaned = 0.0055567 Jy ! Component: 650 - total flux cleaned = 0.00570145 Jy ! Component: 700 - total flux cleaned = 0.00652244 Jy ! Component: 750 - total flux cleaned = 0.00691958 Jy ! Component: 800 - total flux cleaned = 0.00755138 Jy ! Component: 850 - total flux cleaned = 0.00804255 Jy ! Component: 900 - total flux cleaned = 0.00887249 Jy ! Component: 950 - total flux cleaned = 0.00968053 Jy ! Component: 1000 - total flux cleaned = 0.0105737 Jy ! Component: 1050 - total flux cleaned = 0.0112217 Jy ! Component: 1100 - total flux cleaned = 0.012061 Jy ! Component: 1150 - total flux cleaned = 0.0125681 Jy ! Component: 1200 - total flux cleaned = 0.012966 Jy ! Component: 1250 - total flux cleaned = 0.0134458 Jy ! Component: 1300 - total flux cleaned = 0.0136297 Jy ! Component: 1350 - total flux cleaned = 0.0139026 Jy ! Component: 1400 - total flux cleaned = 0.0141689 Jy ! Component: 1450 - total flux cleaned = 0.0144279 Jy ! Component: 1500 - total flux cleaned = 0.0145127 Jy ! Component: 1550 - total flux cleaned = 0.014759 Jy ! Component: 1600 - total flux cleaned = 0.0149191 Jy ! Component: 1650 - total flux cleaned = 0.0151538 Jy ! Component: 1700 - total flux cleaned = 0.0152287 Jy ! Component: 1750 - total flux cleaned = 0.0153792 Jy ! Component: 1800 - total flux cleaned = 0.015452 Jy ! Component: 1850 - total flux cleaned = 0.0155245 Jy ! Component: 1900 - total flux cleaned = 0.0157348 Jy ! Component: 1950 - total flux cleaned = 0.015733 Jy ! Component: 2000 - total flux cleaned = 0.0156671 Jy ! Total flux subtracted in 2048 components = 0.0157981 Jy ! Clean residual min=-0.003766 max=0.005134 Jy/beam ! Clean residual mean=-0.000014 rms=0.001671 Jy/beam ! Combined flux in latest and established models = 0.141026 Jy keep ! Adding 195 model components to the UV plane model. ! The established model now contains 259 components and 0.141026 Jy ![Exited script file: muppet] wmap "J0610-1847_S_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.563 x 10.85 at -5.385 degrees (North through East) ! Clean map min=-0.0077404 max=0.11338 Jy/beam ! Writing clean map to FITS file: J0610-1847_S_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.113376 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0013944 device "J0610-1847_S_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0610-1847_S_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.68966 3.68966 7.37933 14.7587 29.5173 59.0346 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0041 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.113 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.563 x 10.85 at -5.385 degrees (North through East) ! Clean map min=-0.0077404 max=0.11338 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0610-1847_S_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0610-1847_S_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0610-1847_S_2005_06_30_yyk_uvs.log closed on Sat Oct 8 17:01:43 2005