! Started logfile: J0608-2717_X_2005_05_12_yyk_uvs.log on Sat Oct 8 17:01:18 2005 obs J0608-2717_X_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J0608-2717_X_2005_05_12_yyk_uve.fits ! AN table 1: 19 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.864327 visibilities/baseline/integration-bin. ! Found source: J0608-2717 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1439 lines of history. ! ! Reading 2956 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0608-2717_X_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.138895 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7319 mas, bmaj=1.616 mas, bpa=8.286 degrees ! Estimated noise=1.44391 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0948496 Jy ! Component: 100 - total flux cleaned = 0.113893 Jy ! Total flux subtracted in 100 components = 0.113893 Jy ! Clean residual min=-0.006863 max=0.007564 Jy/beam ! Clean residual mean=-0.000021 rms=0.001858 Jy/beam ! Combined flux in latest and established models = 0.113893 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.113893 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.079085Jy sigma=1.126535 ! Fit after self-cal, rms=0.078806Jy sigma=1.119445 ! Inverting map and beam ! Estimated beam: bmin=0.7319 mas, bmaj=1.616 mas, bpa=8.286 degrees ! Estimated noise=1.44391 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9716 mas, bmaj=2.229 mas, bpa=7.065 degrees ! Estimated noise=0.824138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00829853 Jy ! Component: 100 - total flux cleaned = 0.0107217 Jy ! Component: 150 - total flux cleaned = 0.0111739 Jy ! Component: 200 - total flux cleaned = 0.0113109 Jy ! Total flux subtracted in 200 components = 0.0113109 Jy ! Clean residual min=-0.004607 max=0.004559 Jy/beam ! Clean residual mean=-0.000028 rms=0.001303 Jy/beam ! Combined flux in latest and established models = 0.125204 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 19 components and 0.125204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078448Jy sigma=1.107178 ! Fit after self-cal, rms=0.078440Jy sigma=1.107076 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9716 x 2.229 at 7.065 degrees (North through East) ! Clean map min=-0.004329 max=0.11383 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.996483 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.00* KP 0.93 ! LA 0.96 MK 0.99 NL 1.10 OV 1.13 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.0217 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 1.00* KP 0.91 ! LA 0.99 MK 0.99 NL 1.04 OV 1.03 ! PT 0.96 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.987595 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 1.00* KP 0.96 ! LA 0.94 MK 1.02 NL 1.03 OV 1.13 ! PT 1.11 SC 0.84 ! ! ! Fit before self-cal, rms=0.078440Jy sigma=1.107076 ! Fit after self-cal, rms=0.077997Jy sigma=1.095538 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077997Jy sigma=1.095538 ! Fit after self-cal, rms=0.078000Jy sigma=1.095511 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9444 mas, bmaj=2.206 mas, bpa=8.582 degrees ! Estimated noise=0.817896 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135723 Jy ! Component: 100 - total flux cleaned = 0.00145504 Jy ! Component: 150 - total flux cleaned = 0.00144875 Jy ! Component: 200 - total flux cleaned = 0.0014159 Jy ! Total flux subtracted in 200 components = 0.0014159 Jy ! Clean residual min=-0.003500 max=0.003552 Jy/beam ! Clean residual mean=-0.000023 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.12662 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.12662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077897Jy sigma=1.094244 ! Fit after self-cal, rms=0.077894Jy sigma=1.094186 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077894Jy sigma=1.094186 ! Fit after self-cal, rms=0.074952Jy sigma=1.025001 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140736 Jy ! Component: 100 - total flux cleaned = 0.00143837 Jy ! Component: 150 - total flux cleaned = 0.00147922 Jy ! Component: 200 - total flux cleaned = 0.00154976 Jy ! Total flux subtracted in 200 components = 0.00154976 Jy ! Clean residual min=-0.003587 max=0.003633 Jy/beam ! Clean residual mean=-0.000022 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.12817 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.12817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074971Jy sigma=1.024233 ! Fit after self-cal, rms=0.074935Jy sigma=1.020119 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9444 x 2.206 at 8.582 degrees (North through East) ! Clean map min=-0.0034142 max=0.11522 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074935Jy sigma=1.020119 ! Fit after self-cal, rms=0.074882Jy sigma=1.014816 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074882Jy sigma=1.014816 ! Fit after self-cal, rms=0.074948Jy sigma=1.014251 ! Inverting map and beam ! Estimated beam: bmin=0.9284 mas, bmaj=2.169 mas, bpa=9.39 degrees ! Estimated noise=0.810659 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00062774 Jy ! Component: 100 - total flux cleaned = 0.000622141 Jy ! Component: 150 - total flux cleaned = 0.000618606 Jy ! Component: 200 - total flux cleaned = 0.000615567 Jy ! Total flux subtracted in 200 components = 0.000615567 Jy ! Clean residual min=-0.003303 max=0.003555 Jy/beam ! Clean residual mean=-0.000015 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.128785 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.128785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074903Jy sigma=1.013720 ! Fit after self-cal, rms=0.074938Jy sigma=1.013616 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074938Jy sigma=1.013616 ! Fit after self-cal, rms=0.075593Jy sigma=1.008496 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075593Jy sigma=1.008496 ! Fit after self-cal, rms=0.075611Jy sigma=1.008336 ! Inverting map and beam ! Estimated beam: bmin=0.9251 mas, bmaj=2.201 mas, bpa=9.774 degrees ! Estimated noise=0.812638 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000746569 Jy ! Component: 100 - total flux cleaned = 0.000748341 Jy ! Component: 150 - total flux cleaned = 0.000747871 Jy ! Component: 200 - total flux cleaned = 0.000730049 Jy ! Total flux subtracted in 200 components = 0.000730049 Jy ! Clean residual min=-0.003452 max=0.003474 Jy/beam ! Clean residual mean=-0.000016 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.129515 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.129515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075587Jy sigma=1.007981 ! Fit after self-cal, rms=0.075598Jy sigma=1.007953 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=6.583 mas, bpa=9.056 degrees ! Estimated noise=1.00606 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171834 Jy ! Component: 100 - total flux cleaned = 0.000169375 Jy ! Component: 150 - total flux cleaned = 0.000186321 Jy ! Component: 200 - total flux cleaned = 0.000215603 Jy ! Total flux subtracted in 200 components = 0.000215603 Jy ! Clean residual min=-0.003448 max=0.004176 Jy/beam ! Clean residual mean=-0.000029 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 0.129731 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 0.129731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075598Jy sigma=1.007914 ! Fit after self-cal, rms=0.075606Jy sigma=1.007841 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7184 mas, bmaj=1.618 mas, bpa=9.65 degrees ! Estimated noise=1.41437 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0960778 Jy ! Component: 100 - total flux cleaned = 0.117194 Jy ! Component: 150 - total flux cleaned = 0.124235 Jy ! Component: 200 - total flux cleaned = 0.127366 Jy ! Total flux subtracted in 200 components = 0.127366 Jy ! Clean residual min=-0.005818 max=0.005432 Jy/beam ! Clean residual mean=-0.000011 rms=0.001406 Jy/beam ! Combined flux in latest and established models = 0.127366 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.127366 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9251 mas, bmaj=2.201 mas, bpa=9.774 degrees ! Estimated noise=0.812638 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217286 Jy ! Component: 100 - total flux cleaned = 0.00223548 Jy ! Component: 150 - total flux cleaned = 0.00221119 Jy ! Component: 200 - total flux cleaned = 0.00219045 Jy ! Total flux subtracted in 200 components = 0.00219045 Jy ! Clean residual min=-0.003496 max=0.003540 Jy/beam ! Clean residual mean=-0.000016 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.129556 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 22 components and 0.129556 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=6.583 mas, bpa=9.056 degrees ! Estimated noise=1.00606 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000298812 Jy ! Component: 100 - total flux cleaned = 0.000302094 Jy ! Component: 150 - total flux cleaned = 0.000316645 Jy ! Component: 200 - total flux cleaned = 0.000318259 Jy ! Total flux subtracted in 200 components = 0.000318259 Jy ! Clean residual min=-0.003474 max=0.004156 Jy/beam ! Clean residual mean=-0.000029 rms=0.001343 Jy/beam ! Combined flux in latest and established models = 0.129875 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 28 components and 0.129875 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9251 mas, bmaj=2.201 mas, bpa=9.774 degrees ! Estimated noise=0.812638 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151826 Jy ! Component: 100 - total flux cleaned = -0.000152662 Jy ! Component: 150 - total flux cleaned = -0.000156302 Jy ! Component: 200 - total flux cleaned = -0.000175974 Jy ! Total flux subtracted in 200 components = -0.000175974 Jy ! Clean residual min=-0.003476 max=0.003524 Jy/beam ! Clean residual mean=-0.000016 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.129699 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 32 components and 0.129699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075620Jy sigma=1.008449 ! Fit after self-cal, rms=0.075625Jy sigma=1.008407 wmodel J0608-2717_X_2005_05_12_yyk\_map.mod ! Writing 32 model components to file: J0608-2717_X_2005_05_12_yyk_map.mod wobs J0608-2717_X_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J0608-2717_X_2005_05_12_yyk_uvs.fits wwins J0608-2717_X_2005_05_12_yyk\_map.win ! wwins: Wrote 1 windows to J0608-2717_X_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000467706 Jy ! Component: 100 - total flux cleaned = 0.000531662 Jy ! Component: 150 - total flux cleaned = 0.000798173 Jy ! Component: 200 - total flux cleaned = 0.000597614 Jy ! Component: 250 - total flux cleaned = 0.000359869 Jy ! Component: 300 - total flux cleaned = 8.74467e-05 Jy ! Component: 350 - total flux cleaned = -8.59042e-05 Jy ! Component: 400 - total flux cleaned = -0.000126948 Jy ! Component: 450 - total flux cleaned = -0.000207809 Jy ! Component: 500 - total flux cleaned = -0.000403393 Jy ! Component: 550 - total flux cleaned = -0.00040273 Jy ! Component: 600 - total flux cleaned = -0.000402977 Jy ! Component: 650 - total flux cleaned = -0.000367194 Jy ! Component: 700 - total flux cleaned = -0.000368418 Jy ! Component: 750 - total flux cleaned = -0.000402403 Jy ! Component: 800 - total flux cleaned = -0.000434773 Jy ! Component: 850 - total flux cleaned = -0.00027095 Jy ! Component: 900 - total flux cleaned = -0.0001752 Jy ! Component: 950 - total flux cleaned = -0.000143566 Jy ! Component: 1000 - total flux cleaned = -0.000112223 Jy ! Component: 1050 - total flux cleaned = -2.06924e-05 Jy ! Component: 1100 - total flux cleaned = 9.50222e-06 Jy ! Component: 1150 - total flux cleaned = 3.96215e-05 Jy ! Component: 1200 - total flux cleaned = 0.000212333 Jy ! Component: 1250 - total flux cleaned = 9.93668e-05 Jy ! Component: 1300 - total flux cleaned = 0.000184041 Jy ! Component: 1350 - total flux cleaned = 0.000239346 Jy ! Component: 1400 - total flux cleaned = 0.000347912 Jy ! Component: 1450 - total flux cleaned = 0.000427715 Jy ! Component: 1500 - total flux cleaned = 0.000479996 Jy ! Component: 1550 - total flux cleaned = 0.000556899 Jy ! Component: 1600 - total flux cleaned = 0.000531773 Jy ! Component: 1650 - total flux cleaned = 0.000656894 Jy ! Component: 1700 - total flux cleaned = 0.000681814 Jy ! Component: 1750 - total flux cleaned = 0.000754997 Jy ! Component: 1800 - total flux cleaned = 0.000851084 Jy ! Component: 1850 - total flux cleaned = 0.000827379 Jy ! Component: 1900 - total flux cleaned = 0.000897751 Jy ! Component: 1950 - total flux cleaned = 0.000920751 Jy ! Component: 2000 - total flux cleaned = 0.000966108 Jy ! Total flux subtracted in 2048 components = 0.000988952 Jy ! Clean residual min=-0.001336 max=0.001314 Jy/beam ! Clean residual mean=-0.000008 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.130688 Jy keep ! Adding 139 model components to the UV plane model. ! The established model now contains 171 components and 0.130688 Jy ![Exited script file: muppet] wmap "J0608-2717_X_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9251 x 2.201 at 9.774 degrees (North through East) ! Clean map min=-0.0021559 max=0.11268 Jy/beam ! Writing clean map to FITS file: J0608-2717_X_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.112682 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000431153 device "J0608-2717_X_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0608-2717_X_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.14788 1.14788 2.29576 4.59152 9.18304 18.3661 36.7322 73.4643 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.112 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9251 x 2.201 at 9.774 degrees (North through East) ! Clean map min=-0.0021559 max=0.11268 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0608-2717_X_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0608-2717_X_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0608-2717_X_2005_05_12_yyk_uvs.log closed on Sat Oct 8 17:01:22 2005