! Started logfile: J0542-0913_S_2005_05_12_yyk_uvs.log on Sat Oct 8 16:59:20 2005 obs J0542-0913_S_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J0542-0913_S_2005_05_12_yyk_uve.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.757407 visibilities/baseline/integration-bin. ! Found source: J0542-0913 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1443 lines of history. ! ! Reading 1636 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0542-0913_S_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.192147 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.629 mas, bmaj=8.278 mas, bpa=13.45 degrees ! Estimated noise=1.64875 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.125508 Jy ! Component: 100 - total flux cleaned = 0.176007 Jy ! Total flux subtracted in 100 components = 0.176007 Jy ! Clean residual min=-0.009953 max=0.018851 Jy/beam ! Clean residual mean=0.000177 rms=0.004410 Jy/beam ! Combined flux in latest and established models = 0.176007 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.176007 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.091134Jy sigma=1.466294 ! Fit after self-cal, rms=0.090971Jy sigma=1.462407 ! Inverting map and beam ! Estimated beam: bmin=3.629 mas, bmaj=8.278 mas, bpa=13.45 degrees ! Estimated noise=1.64875 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.419 mas, bmaj=11.7 mas, bpa=12.38 degrees ! Estimated noise=1.02884 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0420483 Jy ! Component: 100 - total flux cleaned = 0.0634926 Jy ! Component: 150 - total flux cleaned = 0.0750561 Jy ! Component: 200 - total flux cleaned = 0.0793347 Jy ! Total flux subtracted in 200 components = 0.0793347 Jy ! Clean residual min=-0.008438 max=0.009685 Jy/beam ! Clean residual mean=0.000076 rms=0.002395 Jy/beam ! Combined flux in latest and established models = 0.255342 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 49 model components to the UV plane model. ! The established model now contains 95 components and 0.255342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077206Jy sigma=1.143046 ! Fit after self-cal, rms=0.077097Jy sigma=1.142181 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.419 x 11.7 at 12.38 degrees (North through East) ! Clean map min=-0.0083552 max=0.14109 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.077097Jy sigma=1.142181 ! Fit after self-cal, rms=0.077097Jy sigma=1.142181 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077097Jy sigma=1.142181 ! Fit after self-cal, rms=0.077097Jy sigma=1.142181 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.419 mas, bmaj=11.7 mas, bpa=12.38 degrees ! Estimated noise=1.02884 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209353 Jy ! Component: 100 - total flux cleaned = 0.00347562 Jy ! Component: 150 - total flux cleaned = 0.00486432 Jy ! Component: 200 - total flux cleaned = 0.00607277 Jy ! Total flux subtracted in 200 components = 0.00607277 Jy ! Clean residual min=-0.007702 max=0.007310 Jy/beam ! Clean residual mean=0.000040 rms=0.002067 Jy/beam ! Combined flux in latest and established models = 0.261414 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 100 components and 0.261414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076717Jy sigma=1.128898 ! Fit after self-cal, rms=0.076716Jy sigma=1.128807 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076716Jy sigma=1.128807 ! Fit after self-cal, rms=0.074203Jy sigma=1.085995 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252182 Jy ! Component: 100 - total flux cleaned = 0.0033382 Jy ! Component: 150 - total flux cleaned = 0.00395427 Jy ! Component: 200 - total flux cleaned = 0.00441398 Jy ! Total flux subtracted in 200 components = 0.00441398 Jy ! Clean residual min=-0.007347 max=0.006159 Jy/beam ! Clean residual mean=0.000016 rms=0.001912 Jy/beam ! Combined flux in latest and established models = 0.265828 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 107 components and 0.265828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073964Jy sigma=1.080717 ! Fit after self-cal, rms=0.073821Jy sigma=1.077276 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.419 x 11.7 at 12.38 degrees (North through East) ! Clean map min=-0.0071895 max=0.13885 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073821Jy sigma=1.077276 ! Fit after self-cal, rms=0.073567Jy sigma=1.063113 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073567Jy sigma=1.063113 ! Fit after self-cal, rms=0.073641Jy sigma=1.062671 ! Inverting map and beam ! Estimated beam: bmin=5.374 mas, bmaj=11.74 mas, bpa=13.13 degrees ! Estimated noise=1.02207 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000673096 Jy ! Component: 100 - total flux cleaned = -0.000368562 Jy ! Component: 150 - total flux cleaned = -0.000173518 Jy ! Component: 200 - total flux cleaned = 5.73059e-05 Jy ! Total flux subtracted in 200 components = 5.73059e-05 Jy ! Clean residual min=-0.005758 max=0.005581 Jy/beam ! Clean residual mean=0.000067 rms=0.001666 Jy/beam ! Combined flux in latest and established models = 0.265886 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 110 components and 0.265886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073587Jy sigma=1.060241 ! Fit after self-cal, rms=0.073626Jy sigma=1.060022 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073626Jy sigma=1.060022 ! Fit after self-cal, rms=0.074314Jy sigma=1.062346 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074314Jy sigma=1.062346 ! Fit after self-cal, rms=0.074336Jy sigma=1.062304 ! Inverting map and beam ! Estimated beam: bmin=5.303 mas, bmaj=11.76 mas, bpa=13.65 degrees ! Estimated noise=1.02145 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000771544 Jy ! Component: 100 - total flux cleaned = 0.000986815 Jy ! Component: 150 - total flux cleaned = 0.0011808 Jy ! Component: 200 - total flux cleaned = 0.00135929 Jy ! Total flux subtracted in 200 components = 0.00135929 Jy ! Clean residual min=-0.005739 max=0.006014 Jy/beam ! Clean residual mean=0.000039 rms=0.001732 Jy/beam ! Combined flux in latest and established models = 0.267245 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 114 components and 0.267245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074251Jy sigma=1.061105 ! Fit after self-cal, rms=0.074249Jy sigma=1.060999 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.85 mas, bmaj=15.3 mas, bpa=12 degrees ! Estimated noise=1.11165 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011005 Jy ! Component: 100 - total flux cleaned = 0.00126824 Jy ! Component: 150 - total flux cleaned = 0.00142056 Jy ! Component: 200 - total flux cleaned = 0.00156333 Jy ! Total flux subtracted in 200 components = 0.00156333 Jy ! Clean residual min=-0.006014 max=0.007134 Jy/beam ! Clean residual mean=0.000052 rms=0.001915 Jy/beam ! Combined flux in latest and established models = 0.268808 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 121 components and 0.268808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074281Jy sigma=1.060969 ! Fit after self-cal, rms=0.074275Jy sigma=1.060925 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.576 mas, bmaj=8.331 mas, bpa=14.09 degrees ! Estimated noise=1.61837 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.124954 Jy ! Component: 100 - total flux cleaned = 0.174802 Jy ! Component: 150 - total flux cleaned = 0.202186 Jy ! Component: 200 - total flux cleaned = 0.219326 Jy ! Total flux subtracted in 200 components = 0.219326 Jy ! Clean residual min=-0.007638 max=0.010522 Jy/beam ! Clean residual mean=0.000093 rms=0.002628 Jy/beam ! Combined flux in latest and established models = 0.219326 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 84 model components to the UV plane model. ! The established model now contains 84 components and 0.219326 Jy ! Inverting map and beam ! Estimated beam: bmin=5.303 mas, bmaj=11.76 mas, bpa=13.65 degrees ! Estimated noise=1.02145 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208172 Jy ! Component: 100 - total flux cleaned = 0.0317442 Jy ! Component: 150 - total flux cleaned = 0.034604 Jy ! Component: 200 - total flux cleaned = 0.0365384 Jy ! Total flux subtracted in 200 components = 0.0365384 Jy ! Clean residual min=-0.007167 max=0.008501 Jy/beam ! Clean residual mean=0.000104 rms=0.002192 Jy/beam ! Combined flux in latest and established models = 0.255865 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 102 components and 0.255865 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.85 mas, bmaj=15.3 mas, bpa=12 degrees ! Estimated noise=1.11165 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00606266 Jy ! Component: 100 - total flux cleaned = 0.00720842 Jy ! Component: 150 - total flux cleaned = 0.00818869 Jy ! Component: 200 - total flux cleaned = 0.00891847 Jy ! Total flux subtracted in 200 components = 0.00891847 Jy ! Clean residual min=-0.006363 max=0.007301 Jy/beam ! Clean residual mean=0.000087 rms=0.002059 Jy/beam ! Combined flux in latest and established models = 0.264783 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 104 components and 0.264783 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.303 mas, bmaj=11.76 mas, bpa=13.65 degrees ! Estimated noise=1.02145 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000979305 Jy ! Component: 100 - total flux cleaned = -0.000208085 Jy ! Component: 150 - total flux cleaned = 0.000432429 Jy ! Component: 200 - total flux cleaned = 0.000956228 Jy ! Total flux subtracted in 200 components = 0.000956228 Jy ! Clean residual min=-0.005863 max=0.006078 Jy/beam ! Clean residual mean=0.000047 rms=0.001780 Jy/beam ! Combined flux in latest and established models = 0.265739 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 107 components and 0.265739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074071Jy sigma=1.062251 ! Fit after self-cal, rms=0.074072Jy sigma=1.061875 wmodel J0542-0913_S_2005_05_12_yyk\_map.mod ! Writing 107 model components to file: J0542-0913_S_2005_05_12_yyk_map.mod wobs J0542-0913_S_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J0542-0913_S_2005_05_12_yyk_uvs.fits wwins J0542-0913_S_2005_05_12_yyk\_map.win ! wwins: Wrote 1 windows to J0542-0913_S_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.72339e-05 Jy ! Component: 100 - total flux cleaned = -0.00095707 Jy ! Component: 150 - total flux cleaned = -0.00150709 Jy ! Component: 200 - total flux cleaned = -0.00150869 Jy ! Component: 250 - total flux cleaned = -0.00119099 Jy ! Component: 300 - total flux cleaned = -0.000889818 Jy ! Component: 350 - total flux cleaned = -0.00088987 Jy ! Component: 400 - total flux cleaned = -0.000957174 Jy ! Component: 450 - total flux cleaned = -0.000696396 Jy ! Component: 500 - total flux cleaned = -0.000443103 Jy ! Component: 550 - total flux cleaned = -7.80578e-05 Jy ! Component: 600 - total flux cleaned = -1.825e-05 Jy ! Component: 650 - total flux cleaned = 4.09111e-05 Jy ! Component: 700 - total flux cleaned = 0.000424706 Jy ! Component: 750 - total flux cleaned = 0.000584117 Jy ! Component: 800 - total flux cleaned = 0.000791522 Jy ! Component: 850 - total flux cleaned = 0.000893266 Jy ! Component: 900 - total flux cleaned = 0.000942628 Jy ! Component: 950 - total flux cleaned = 0.000991461 Jy ! Component: 1000 - total flux cleaned = 0.00108527 Jy ! Component: 1050 - total flux cleaned = 0.00117731 Jy ! Component: 1100 - total flux cleaned = 0.00126608 Jy ! Component: 1150 - total flux cleaned = 0.00113653 Jy ! Component: 1200 - total flux cleaned = 0.00109445 Jy ! Component: 1250 - total flux cleaned = 0.00105346 Jy ! Component: 1300 - total flux cleaned = 0.00101351 Jy ! Component: 1350 - total flux cleaned = 0.00105399 Jy ! Component: 1400 - total flux cleaned = 0.00105381 Jy ! Component: 1450 - total flux cleaned = 0.000902659 Jy ! Component: 1500 - total flux cleaned = 0.00086541 Jy ! Component: 1550 - total flux cleaned = 0.000719819 Jy ! Component: 1600 - total flux cleaned = 0.000720094 Jy ! Component: 1650 - total flux cleaned = 0.000614356 Jy ! Component: 1700 - total flux cleaned = 0.00061461 Jy ! Component: 1750 - total flux cleaned = 0.000546134 Jy ! Component: 1800 - total flux cleaned = 0.000478319 Jy ! Component: 1850 - total flux cleaned = 0.000378826 Jy ! Component: 1900 - total flux cleaned = 0.00034589 Jy ! Component: 1950 - total flux cleaned = 0.000217617 Jy ! Component: 2000 - total flux cleaned = 0.000185972 Jy ! Total flux subtracted in 2048 components = 9.2431e-05 Jy ! Clean residual min=-0.001757 max=0.001614 Jy/beam ! Clean residual mean=0.000040 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.265832 Jy keep ! Adding 121 model components to the UV plane model. ! The established model now contains 228 components and 0.265832 Jy ![Exited script file: muppet] wmap "J0542-0913_S_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.303 x 11.76 at 13.65 degrees (North through East) ! Clean map min=-0.0045658 max=0.13678 Jy/beam ! Writing clean map to FITS file: J0542-0913_S_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.136784 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000675284 device "J0542-0913_S_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0542-0913_S_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.48106 1.48106 2.96211 5.92422 11.8484 23.6969 47.3938 94.7876 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.136 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.303 x 11.76 at 13.65 degrees (North through East) ! Clean map min=-0.0045658 max=0.13678 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0542-0913_S_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0542-0913_S_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0542-0913_S_2005_05_12_yyk_uvs.log closed on Sat Oct 8 16:59:24 2005