! Started logfile: J0532-0307_X_2005_05_12_yyk_uvs.log on Sat Oct 8 16:58:42 2005 obs J0532-0307_X_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J0532-0307_X_2005_05_12_yyk_uve.fits ! AN table 1: 19 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.853801 visibilities/baseline/integration-bin. ! Found source: J0532-0307 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1439 lines of history. ! ! Reading 2920 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0532-0307_X_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.158975 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7002 mas, bmaj=1.734 mas, bpa=0.4007 degrees ! Estimated noise=1.06676 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.119708 Jy ! Component: 100 - total flux cleaned = 0.144975 Jy ! Total flux subtracted in 100 components = 0.144975 Jy ! Clean residual min=-0.006216 max=0.009844 Jy/beam ! Clean residual mean=-0.000016 rms=0.001757 Jy/beam ! Combined flux in latest and established models = 0.144975 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.144975 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.066808Jy sigma=1.180029 ! Fit after self-cal, rms=0.066926Jy sigma=1.160125 ! Inverting map and beam ! Estimated beam: bmin=0.7002 mas, bmaj=1.734 mas, bpa=0.4007 degrees ! Estimated noise=1.06676 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9019 mas, bmaj=2.106 mas, bpa=-0.3802 degrees ! Estimated noise=0.709368 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8, 5.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159134 Jy ! Component: 100 - total flux cleaned = 0.0244584 Jy ! Component: 150 - total flux cleaned = 0.0297679 Jy ! Component: 200 - total flux cleaned = 0.0325172 Jy ! Total flux subtracted in 200 components = 0.0325172 Jy ! Clean residual min=-0.005048 max=0.005027 Jy/beam ! Clean residual mean=-0.000010 rms=0.001413 Jy/beam ! Combined flux in latest and established models = 0.177492 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 45 model components to the UV plane model. ! The established model now contains 46 components and 0.177492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064456Jy sigma=1.094181 ! Fit after self-cal, rms=0.064230Jy sigma=1.090012 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9019 x 2.106 at -0.3802 degrees (North through East) ! Clean map min=-0.0047104 max=0.14322 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.98658 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.90 HN 1.13 KP 0.99 ! LA 1.18 MK 1.04 NL 0.99 OV 1.00 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00296 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.90 HN 1.13 KP 0.90 ! LA 1.18 MK 0.94 NL 0.99 OV 1.01 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.99821 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.08 KP 0.87 ! LA 1.17 MK 0.98 NL 0.95 OV 0.99 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.971498 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.05 KP 1.02 ! LA 1.14 MK 1.04 NL 0.93 OV 1.02 ! PT 1.07 SC 1.05 ! ! ! Fit before self-cal, rms=0.064230Jy sigma=1.090012 ! Fit after self-cal, rms=0.061295Jy sigma=1.056310 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061295Jy sigma=1.056310 ! Fit after self-cal, rms=0.061300Jy sigma=1.056279 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9096 mas, bmaj=2.104 mas, bpa=-0.2003 degrees ! Estimated noise=0.685183 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231239 Jy ! Component: 100 - total flux cleaned = 0.00364489 Jy ! Component: 150 - total flux cleaned = 0.00467462 Jy ! Component: 200 - total flux cleaned = 0.00519098 Jy ! Total flux subtracted in 200 components = 0.00519098 Jy ! Clean residual min=-0.003051 max=0.003068 Jy/beam ! Clean residual mean=-0.000007 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.182683 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 70 components and 0.182683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061029Jy sigma=1.048384 ! Fit after self-cal, rms=0.061001Jy sigma=1.047898 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061001Jy sigma=1.047898 ! Fit after self-cal, rms=0.058320Jy sigma=0.990794 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181285 Jy ! Component: 100 - total flux cleaned = 0.00239105 Jy ! Component: 150 - total flux cleaned = 0.00286438 Jy ! Component: 200 - total flux cleaned = 0.0029983 Jy ! Total flux subtracted in 200 components = 0.0029983 Jy ! Clean residual min=-0.002545 max=0.002710 Jy/beam ! Clean residual mean=-0.000007 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.185681 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 86 components and 0.185681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058271Jy sigma=0.989062 ! Fit after self-cal, rms=0.058085Jy sigma=0.984988 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9096 x 2.104 at -0.2003 degrees (North through East) ! Clean map min=-0.0023672 max=0.13981 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058085Jy sigma=0.984988 ! Fit after self-cal, rms=0.058138Jy sigma=0.978242 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058138Jy sigma=0.978242 ! Fit after self-cal, rms=0.058128Jy sigma=0.977638 ! Inverting map and beam ! Estimated beam: bmin=0.9099 mas, bmaj=2.103 mas, bpa=-0.2489 degrees ! Estimated noise=0.683937 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134149 Jy ! Component: 100 - total flux cleaned = 0.00176183 Jy ! Component: 150 - total flux cleaned = 0.00215635 Jy ! Component: 200 - total flux cleaned = 0.00240998 Jy ! Total flux subtracted in 200 components = 0.00240998 Jy ! Clean residual min=-0.002182 max=0.002292 Jy/beam ! Clean residual mean=-0.000007 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.188091 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 100 components and 0.188091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058103Jy sigma=0.976472 ! Fit after self-cal, rms=0.058099Jy sigma=0.976204 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058099Jy sigma=0.976204 ! Fit after self-cal, rms=0.058305Jy sigma=0.962266 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058305Jy sigma=0.962266 ! Fit after self-cal, rms=0.058336Jy sigma=0.962151 ! Inverting map and beam ! Estimated beam: bmin=0.911 mas, bmaj=2.104 mas, bpa=-0.01048 degrees ! Estimated noise=0.683602 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000673822 Jy ! Component: 100 - total flux cleaned = 0.000836239 Jy ! Component: 150 - total flux cleaned = 0.000919659 Jy ! Component: 200 - total flux cleaned = 0.00099389 Jy ! Total flux subtracted in 200 components = 0.00099389 Jy ! Clean residual min=-0.002132 max=0.002065 Jy/beam ! Clean residual mean=-0.000006 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.189085 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 108 components and 0.189085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058323Jy sigma=0.961566 ! Fit after self-cal, rms=0.058330Jy sigma=0.961505 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.281 mas, bmaj=3.544 mas, bpa=2.563 degrees ! Estimated noise=0.8668 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00081282 Jy ! Component: 100 - total flux cleaned = 0.00104635 Jy ! Component: 150 - total flux cleaned = 0.00124077 Jy ! Component: 200 - total flux cleaned = 0.00137417 Jy ! Total flux subtracted in 200 components = 0.00137417 Jy ! Clean residual min=-0.002198 max=0.002078 Jy/beam ! Clean residual mean=-0.000012 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.190459 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 115 components and 0.190459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058335Jy sigma=0.961373 ! Fit after self-cal, rms=0.058335Jy sigma=0.961342 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7028 mas, bmaj=1.735 mas, bpa=0.6745 degrees ! Estimated noise=1.04185 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.117631 Jy ! Component: 100 - total flux cleaned = 0.142377 Jy ! Component: 150 - total flux cleaned = 0.154465 Jy ! Component: 200 - total flux cleaned = 0.162384 Jy ! Total flux subtracted in 200 components = 0.162384 Jy ! Clean residual min=-0.003640 max=0.004079 Jy/beam ! Clean residual mean=-0.000008 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.162384 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.162384 Jy ! Inverting map and beam ! Estimated beam: bmin=0.911 mas, bmaj=2.104 mas, bpa=-0.01048 degrees ! Estimated noise=0.683602 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00815157 Jy ! Component: 100 - total flux cleaned = 0.0130177 Jy ! Component: 150 - total flux cleaned = 0.0164928 Jy ! Component: 200 - total flux cleaned = 0.0190902 Jy ! Total flux subtracted in 200 components = 0.0190902 Jy ! Clean residual min=-0.002464 max=0.002374 Jy/beam ! Clean residual mean=-0.000008 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.181474 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 72 components and 0.181474 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.281 mas, bmaj=3.544 mas, bpa=2.563 degrees ! Estimated noise=0.8668 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323396 Jy ! Component: 100 - total flux cleaned = 0.00527431 Jy ! Component: 150 - total flux cleaned = 0.00667478 Jy ! Component: 200 - total flux cleaned = 0.00766925 Jy ! Total flux subtracted in 200 components = 0.00766925 Jy ! Clean residual min=-0.002287 max=0.002227 Jy/beam ! Clean residual mean=-0.000013 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.189143 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 101 components and 0.189143 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.911 mas, bmaj=2.104 mas, bpa=-0.01048 degrees ! Estimated noise=0.683602 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 6.51991e-05 Jy ! Component: 100 - total flux cleaned = 0.000244144 Jy ! Component: 150 - total flux cleaned = 0.000366365 Jy ! Component: 200 - total flux cleaned = 0.000418898 Jy ! Total flux subtracted in 200 components = 0.000418898 Jy ! Clean residual min=-0.002240 max=0.002086 Jy/beam ! Clean residual mean=-0.000007 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.189562 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 120 components and 0.189562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058330Jy sigma=0.961485 ! Fit after self-cal, rms=0.058322Jy sigma=0.961364 wmodel J0532-0307_X_2005_05_12_yyk\_map.mod ! Writing 120 model components to file: J0532-0307_X_2005_05_12_yyk_map.mod wobs J0532-0307_X_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J0532-0307_X_2005_05_12_yyk_uvs.fits wwins J0532-0307_X_2005_05_12_yyk\_map.win ! wwins: Wrote 2 windows to J0532-0307_X_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.41606e-05 Jy ! Component: 100 - total flux cleaned = -0.000307911 Jy ! Component: 150 - total flux cleaned = -0.000414085 Jy ! Component: 200 - total flux cleaned = -0.00051627 Jy ! Component: 250 - total flux cleaned = -0.00064724 Jy ! Component: 300 - total flux cleaned = -0.00102768 Jy ! Component: 350 - total flux cleaned = -0.00127425 Jy ! Component: 400 - total flux cleaned = -0.00145515 Jy ! Component: 450 - total flux cleaned = -0.00148539 Jy ! Component: 500 - total flux cleaned = -0.00151544 Jy ! Component: 550 - total flux cleaned = -0.0016562 Jy ! Component: 600 - total flux cleaned = -0.00162905 Jy ! Component: 650 - total flux cleaned = -0.00171064 Jy ! Component: 700 - total flux cleaned = -0.00176383 Jy ! Component: 750 - total flux cleaned = -0.00181515 Jy ! Component: 800 - total flux cleaned = -0.00178963 Jy ! Component: 850 - total flux cleaned = -0.00183985 Jy ! Component: 900 - total flux cleaned = -0.00186453 Jy ! Component: 950 - total flux cleaned = -0.00181611 Jy ! Component: 1000 - total flux cleaned = -0.00186352 Jy ! Component: 1050 - total flux cleaned = -0.00183951 Jy ! Component: 1100 - total flux cleaned = -0.0017934 Jy ! Component: 1150 - total flux cleaned = -0.00181605 Jy ! Component: 1200 - total flux cleaned = -0.00183826 Jy ! Component: 1250 - total flux cleaned = -0.00190421 Jy ! Component: 1300 - total flux cleaned = -0.00192597 Jy ! Component: 1350 - total flux cleaned = -0.00203273 Jy ! Component: 1400 - total flux cleaned = -0.00203247 Jy ! Component: 1450 - total flux cleaned = -0.00207389 Jy ! Component: 1500 - total flux cleaned = -0.00211468 Jy ! Component: 1550 - total flux cleaned = -0.00213492 Jy ! Component: 1600 - total flux cleaned = -0.00227416 Jy ! Component: 1650 - total flux cleaned = -0.00235273 Jy ! Component: 1700 - total flux cleaned = -0.00248891 Jy ! Component: 1750 - total flux cleaned = -0.00254672 Jy ! Component: 1800 - total flux cleaned = -0.00266094 Jy ! Component: 1850 - total flux cleaned = -0.00282978 Jy ! Component: 1900 - total flux cleaned = -0.00290387 Jy ! Component: 1950 - total flux cleaned = -0.00303217 Jy ! Component: 2000 - total flux cleaned = -0.0031956 Jy ! Total flux subtracted in 2048 components = -0.0033033 Jy ! Clean residual min=-0.001127 max=0.001043 Jy/beam ! Clean residual mean=-0.000003 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.186259 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 245 components and 0.186259 Jy ![Exited script file: muppet] wmap "J0532-0307_X_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.911 x 2.104 at -0.01048 degrees (North through East) ! Clean map min=-0.0018048 max=0.1392 Jy/beam ! Writing clean map to FITS file: J0532-0307_X_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.139198 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000331315 device "J0532-0307_X_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0532-0307_X_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.714051 0.714051 1.4281 2.85621 5.71241 11.4248 22.8496 45.6993 91.3986 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.139 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.911 x 2.104 at -0.01048 degrees (North through East) ! Clean map min=-0.0018048 max=0.1392 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0532-0307_X_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0532-0307_X_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0532-0307_X_2005_05_12_yyk_uvs.log closed on Sat Oct 8 16:58:46 2005