! Started logfile: J0517-0520_X_2005_06_01_yyk_uvs.log on Sat Oct 8 16:58:11 2005 obs J0517-0520_X_2005_06_01_yyk_uve.fits ! Reading UV FITS file: J0517-0520_X_2005_06_01_yyk_uve.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.847778 visibilities/baseline/integration-bin. ! Found source: J0517-0520 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1618 lines of history. ! ! Reading 3052 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0517-0520_X_2005_06_01_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.135182 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7191 mas, bmaj=2.052 mas, bpa=-8.65 degrees ! Estimated noise=0.965216 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0958855 Jy ! Component: 100 - total flux cleaned = 0.118419 Jy ! Total flux subtracted in 100 components = 0.118419 Jy ! Clean residual min=-0.005395 max=0.006888 Jy/beam ! Clean residual mean=0.000001 rms=0.001457 Jy/beam ! Combined flux in latest and established models = 0.118419 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.118419 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.066294Jy sigma=1.175022 ! Fit after self-cal, rms=0.066023Jy sigma=1.170060 ! Inverting map and beam ! Estimated beam: bmin=0.7191 mas, bmaj=2.052 mas, bpa=-8.65 degrees ! Estimated noise=0.965216 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9274 mas, bmaj=2.433 mas, bpa=-7.802 degrees ! Estimated noise=0.660992 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117845 Jy ! Component: 100 - total flux cleaned = 0.0163252 Jy ! Component: 150 - total flux cleaned = 0.0183728 Jy ! Component: 200 - total flux cleaned = 0.018961 Jy ! Total flux subtracted in 200 components = 0.018961 Jy ! Clean residual min=-0.003475 max=0.003350 Jy/beam ! Clean residual mean=0.000004 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.13738 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 40 components and 0.13738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064567Jy sigma=1.141229 ! Fit after self-cal, rms=0.064547Jy sigma=1.140715 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9274 x 2.433 at -7.802 degrees (North through East) ! Clean map min=-0.0032609 max=0.11396 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01175 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 1.02 KP 1.02 ! LA 1.01 MK 1.04 NL 1.00 OV 0.99 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.01838 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 0.92 KP 0.92 ! LA 0.98 MK 1.00 NL 0.97 OV 1.05 ! PT 1.01 SC 0.95 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.064547Jy sigma=1.140715 ! Fit after self-cal, rms=0.064384Jy sigma=1.137664 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064384Jy sigma=1.137664 ! Fit after self-cal, rms=0.064382Jy sigma=1.137661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9311 mas, bmaj=2.415 mas, bpa=-7.274 degrees ! Estimated noise=0.661582 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00071296 Jy ! Component: 100 - total flux cleaned = 0.000841427 Jy ! Component: 150 - total flux cleaned = 0.000941779 Jy ! Component: 200 - total flux cleaned = 0.000998289 Jy ! Total flux subtracted in 200 components = 0.000998289 Jy ! Clean residual min=-0.003267 max=0.003367 Jy/beam ! Clean residual mean=0.000005 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.138379 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.138379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064335Jy sigma=1.136776 ! Fit after self-cal, rms=0.064326Jy sigma=1.136560 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064326Jy sigma=1.136560 ! Fit after self-cal, rms=0.057754Jy sigma=0.995712 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331868 Jy ! Component: 100 - total flux cleaned = 0.00429582 Jy ! Component: 150 - total flux cleaned = 0.00447869 Jy ! Component: 200 - total flux cleaned = 0.00445834 Jy ! Total flux subtracted in 200 components = 0.00445834 Jy ! Clean residual min=-0.003005 max=0.002929 Jy/beam ! Clean residual mean=0.000003 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.142837 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 59 components and 0.142837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057581Jy sigma=0.992966 ! Fit after self-cal, rms=0.057301Jy sigma=0.986095 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9311 x 2.415 at -7.274 degrees (North through East) ! Clean map min=-0.0027527 max=0.11713 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057301Jy sigma=0.986095 ! Fit after self-cal, rms=0.056877Jy sigma=0.975080 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056877Jy sigma=0.975080 ! Fit after self-cal, rms=0.056876Jy sigma=0.974491 ! Inverting map and beam ! Estimated beam: bmin=0.9313 mas, bmaj=2.42 mas, bpa=-7.482 degrees ! Estimated noise=0.65853 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000418681 Jy ! Component: 100 - total flux cleaned = 0.000369496 Jy ! Component: 150 - total flux cleaned = 0.000348894 Jy ! Component: 200 - total flux cleaned = 0.000332706 Jy ! Total flux subtracted in 200 components = 0.000332706 Jy ! Clean residual min=-0.002183 max=0.002664 Jy/beam ! Clean residual mean=-0.000001 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.14317 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 65 components and 0.14317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056854Jy sigma=0.974084 ! Fit after self-cal, rms=0.056848Jy sigma=0.973860 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056848Jy sigma=0.973860 ! Fit after self-cal, rms=0.056892Jy sigma=0.968743 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056892Jy sigma=0.968743 ! Fit after self-cal, rms=0.056911Jy sigma=0.968627 ! Inverting map and beam ! Estimated beam: bmin=0.9178 mas, bmaj=2.424 mas, bpa=-8.03 degrees ! Estimated noise=0.652877 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000546999 Jy ! Component: 100 - total flux cleaned = -0.000478059 Jy ! Component: 150 - total flux cleaned = -0.000447079 Jy ! Component: 200 - total flux cleaned = -0.000425653 Jy ! Total flux subtracted in 200 components = -0.000425653 Jy ! Clean residual min=-0.002485 max=0.002802 Jy/beam ! Clean residual mean=-0.000000 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.142744 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 0.142744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056878Jy sigma=0.967866 ! Fit after self-cal, rms=0.056873Jy sigma=0.967780 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.179 mas, bmaj=3.857 mas, bpa=-3.113 degrees ! Estimated noise=0.819574 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000337951 Jy ! Component: 100 - total flux cleaned = 0.000275071 Jy ! Component: 150 - total flux cleaned = 0.000221287 Jy ! Component: 200 - total flux cleaned = 0.000211364 Jy ! Total flux subtracted in 200 components = 0.000211364 Jy ! Clean residual min=-0.002845 max=0.003222 Jy/beam ! Clean residual mean=0.000000 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.142956 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 76 components and 0.142956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056871Jy sigma=0.967751 ! Fit after self-cal, rms=0.056857Jy sigma=0.967528 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7171 mas, bmaj=2.064 mas, bpa=-8.893 degrees ! Estimated noise=0.954489 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0977231 Jy ! Component: 100 - total flux cleaned = 0.121645 Jy ! Component: 150 - total flux cleaned = 0.132015 Jy ! Component: 200 - total flux cleaned = 0.13772 Jy ! Total flux subtracted in 200 components = 0.13772 Jy ! Clean residual min=-0.003759 max=0.004539 Jy/beam ! Clean residual mean=-0.000000 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.13772 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.13772 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9178 mas, bmaj=2.424 mas, bpa=-8.03 degrees ! Estimated noise=0.652877 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, -2.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00407495 Jy ! Component: 100 - total flux cleaned = 0.00503963 Jy ! Component: 150 - total flux cleaned = 0.00559117 Jy ! Component: 200 - total flux cleaned = 0.00570352 Jy ! Total flux subtracted in 200 components = 0.00570352 Jy ! Clean residual min=-0.002454 max=0.002835 Jy/beam ! Clean residual mean=0.000000 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.143423 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 50 components and 0.143423 Jy ! Inverting map ! Added new window around map position (-17.4, -3.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188149 Jy ! Component: 100 - total flux cleaned = 0.0021298 Jy ! Component: 150 - total flux cleaned = 0.00231426 Jy ! Component: 200 - total flux cleaned = 0.00243266 Jy ! Total flux subtracted in 200 components = 0.00243266 Jy ! Clean residual min=-0.002109 max=0.002570 Jy/beam ! Clean residual mean=0.000002 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.145856 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 76 components and 0.145856 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.179 mas, bmaj=3.857 mas, bpa=-3.113 degrees ! Estimated noise=0.819574 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.73632e-05 Jy ! Component: 100 - total flux cleaned = 2.70943e-05 Jy ! Component: 150 - total flux cleaned = 2.47868e-05 Jy ! Component: 200 - total flux cleaned = 2.18818e-05 Jy ! Total flux subtracted in 200 components = 2.18818e-05 Jy ! Clean residual min=-0.002503 max=0.003064 Jy/beam ! Clean residual mean=0.000005 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.145878 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 93 components and 0.145878 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9178 mas, bmaj=2.424 mas, bpa=-8.03 degrees ! Estimated noise=0.652877 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 5.413e-05 Jy ! Component: 100 - total flux cleaned = 8.46183e-05 Jy ! Component: 150 - total flux cleaned = 8.48514e-05 Jy ! Component: 200 - total flux cleaned = 5.79918e-05 Jy ! Total flux subtracted in 200 components = 5.79918e-05 Jy ! Clean residual min=-0.002010 max=0.002496 Jy/beam ! Clean residual mean=0.000002 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.145936 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 113 components and 0.145936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056682Jy sigma=0.963396 ! Fit after self-cal, rms=0.056665Jy sigma=0.963098 wmodel J0517-0520_X_2005_06_01_yyk\_map.mod ! Writing 113 model components to file: J0517-0520_X_2005_06_01_yyk_map.mod wobs J0517-0520_X_2005_06_01_yyk\_uvs.fits ! Writing UV FITS file: J0517-0520_X_2005_06_01_yyk_uvs.fits wwins J0517-0520_X_2005_06_01_yyk\_map.win ! wwins: Wrote 3 windows to J0517-0520_X_2005_06_01_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111721 Jy ! Component: 100 - total flux cleaned = 0.00172403 Jy ! Component: 150 - total flux cleaned = 0.00196543 Jy ! Component: 200 - total flux cleaned = 0.00212889 Jy ! Component: 250 - total flux cleaned = 0.00206625 Jy ! Component: 300 - total flux cleaned = 0.00209662 Jy ! Component: 350 - total flux cleaned = 0.00191984 Jy ! Component: 400 - total flux cleaned = 0.00174759 Jy ! Component: 450 - total flux cleaned = 0.00155148 Jy ! Component: 500 - total flux cleaned = 0.00144135 Jy ! Component: 550 - total flux cleaned = 0.00125394 Jy ! Component: 600 - total flux cleaned = 0.00117507 Jy ! Component: 650 - total flux cleaned = 0.00102072 Jy ! Component: 700 - total flux cleaned = 0.00094474 Jy ! Component: 750 - total flux cleaned = 0.000820615 Jy ! Component: 800 - total flux cleaned = 0.000675116 Jy ! Component: 850 - total flux cleaned = 0.000651974 Jy ! Component: 900 - total flux cleaned = 0.000581663 Jy ! Component: 950 - total flux cleaned = 0.000467023 Jy ! Component: 1000 - total flux cleaned = 0.000398879 Jy ! Component: 1050 - total flux cleaned = 0.000376536 Jy ! Component: 1100 - total flux cleaned = 0.00022349 Jy ! Component: 1150 - total flux cleaned = 0.000180617 Jy ! Component: 1200 - total flux cleaned = 0.000138768 Jy ! Component: 1250 - total flux cleaned = 9.73958e-05 Jy ! Component: 1300 - total flux cleaned = 9.76506e-05 Jy ! Component: 1350 - total flux cleaned = 3.69636e-05 Jy ! Component: 1400 - total flux cleaned = 1.70001e-05 Jy ! Component: 1450 - total flux cleaned = -6.15201e-05 Jy ! Component: 1500 - total flux cleaned = -6.11387e-05 Jy ! Component: 1550 - total flux cleaned = -4.20269e-05 Jy ! Component: 1600 - total flux cleaned = -6.06866e-05 Jy ! Component: 1650 - total flux cleaned = -4.41877e-06 Jy ! Component: 1700 - total flux cleaned = 3.22306e-05 Jy ! Component: 1750 - total flux cleaned = -2.26076e-05 Jy ! Component: 1800 - total flux cleaned = -7.63794e-05 Jy ! Component: 1850 - total flux cleaned = 1.29945e-05 Jy ! Component: 1900 - total flux cleaned = -2.23321e-05 Jy ! Component: 1950 - total flux cleaned = -3.97437e-05 Jy ! Component: 2000 - total flux cleaned = 1.20319e-05 Jy ! Total flux subtracted in 2048 components = -2.2169e-05 Jy ! Clean residual min=-0.001214 max=0.001052 Jy/beam ! Clean residual mean=-0.000001 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.145914 Jy keep ! Adding 155 model components to the UV plane model. ! The established model now contains 268 components and 0.145914 Jy ![Exited script file: muppet] wmap "J0517-0520_X_2005_06_01_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9178 x 2.424 at -8.03 degrees (North through East) ! Clean map min=-0.0015206 max=0.1148 Jy/beam ! Writing clean map to FITS file: J0517-0520_X_2005_06_01_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.114799 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000334603 device "J0517-0520_X_2005_06_01_yyk\_map.eps/VPS" ! Attempting to open device: 'J0517-0520_X_2005_06_01_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.874403 0.874403 1.74881 3.49761 6.99522 13.9904 27.9809 55.9618 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.114 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9178 x 2.424 at -8.03 degrees (North through East) ! Clean map min=-0.0015206 max=0.1148 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0517-0520_X_2005_06_01_yyk\_map.gif/gif" ! Attempting to open device: 'J0517-0520_X_2005_06_01_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0517-0520_X_2005_06_01_yyk_uvs.log closed on Sat Oct 8 16:58:16 2005