! Started logfile: J0517-0520_S_2005_06_01_yyk_uvs.log on Sat Oct 8 16:58:07 2005 obs J0517-0520_S_2005_06_01_yyk_uve.fits ! Reading UV FITS file: J0517-0520_S_2005_06_01_yyk_uve.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.847778 visibilities/baseline/integration-bin. ! Found source: J0517-0520 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1802 lines of history. ! ! Reading 3052 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0517-0520_S_2005_06_01_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.126671 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.72 mas, bmaj=7.869 mas, bpa=-8.77 degrees ! Estimated noise=0.894745 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0877332 Jy ! Component: 100 - total flux cleaned = 0.10692 Jy ! Total flux subtracted in 100 components = 0.10692 Jy ! Clean residual min=-0.005494 max=0.008461 Jy/beam ! Clean residual mean=0.000021 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 0.10692 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.10692 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.066428Jy sigma=1.114332 ! Fit after self-cal, rms=0.066212Jy sigma=1.106261 ! Inverting map and beam ! Estimated beam: bmin=2.72 mas, bmaj=7.869 mas, bpa=-8.77 degrees ! Estimated noise=0.894745 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=9.448 mas, bpa=-10.14 degrees ! Estimated noise=0.675372 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -11). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123791 Jy ! Component: 100 - total flux cleaned = 0.0183911 Jy ! Component: 150 - total flux cleaned = 0.0212877 Jy ! Component: 200 - total flux cleaned = 0.0221136 Jy ! Total flux subtracted in 200 components = 0.0221136 Jy ! Clean residual min=-0.003188 max=0.003416 Jy/beam ! Clean residual mean=-0.000045 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.129033 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 59 model components to the UV plane model. ! The established model now contains 75 components and 0.129033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064245Jy sigma=1.070018 ! Fit after self-cal, rms=0.064154Jy sigma=1.068680 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.386 x 9.448 at -10.14 degrees (North through East) ! Clean map min=-0.0032903 max=0.10295 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02785 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.94 HN 0.99 KP 0.94 ! LA 1.10 MK 0.90 NL 0.95 OV 0.93 ! PT 1.05 SC 0.98 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.994188 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.06 HN 1.05 KP 1.02 ! LA 1.09 MK 0.97 NL 0.97 OV 0.97 ! PT 0.96 SC 0.90 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.958194 ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.15 HN 1.04 KP 0.98 ! LA 0.94 MK 1.09 NL 1.01 OV 0.97 ! PT 1.07 SC 1.07 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.064154Jy sigma=1.068680 ! Fit after self-cal, rms=0.063574Jy sigma=1.059745 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063574Jy sigma=1.059745 ! Fit after self-cal, rms=0.063571Jy sigma=1.059722 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=9.383 mas, bpa=-10.1 degrees ! Estimated noise=0.676656 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269205 Jy ! Component: 100 - total flux cleaned = 0.00302245 Jy ! Component: 150 - total flux cleaned = 0.00329416 Jy ! Component: 200 - total flux cleaned = 0.00352286 Jy ! Total flux subtracted in 200 components = 0.00352286 Jy ! Clean residual min=-0.002631 max=0.003484 Jy/beam ! Clean residual mean=-0.000014 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.132556 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 103 components and 0.132556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063423Jy sigma=1.057319 ! Fit after self-cal, rms=0.063405Jy sigma=1.057166 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063405Jy sigma=1.057166 ! Fit after self-cal, rms=0.061100Jy sigma=1.009744 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18, -15.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00382327 Jy ! Component: 100 - total flux cleaned = 0.00486643 Jy ! Component: 150 - total flux cleaned = 0.00527766 Jy ! Component: 200 - total flux cleaned = 0.00539524 Jy ! Total flux subtracted in 200 components = 0.00539524 Jy ! Clean residual min=-0.002281 max=0.002107 Jy/beam ! Clean residual mean=-0.000022 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.137951 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 45 model components to the UV plane model. ! The established model now contains 145 components and 0.137951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060875Jy sigma=1.005111 ! Fit after self-cal, rms=0.060804Jy sigma=1.002214 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.35 x 9.383 at -10.1 degrees (North through East) ! Clean map min=-0.0022081 max=0.10445 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060804Jy sigma=1.002214 ! Fit after self-cal, rms=0.061055Jy sigma=0.994579 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061055Jy sigma=0.994579 ! Fit after self-cal, rms=0.061077Jy sigma=0.994319 ! Inverting map and beam ! Estimated beam: bmin=3.327 mas, bmaj=9.266 mas, bpa=-9.977 degrees ! Estimated noise=0.684762 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268882 Jy ! Component: 100 - total flux cleaned = 0.00332468 Jy ! Component: 150 - total flux cleaned = 0.00374535 Jy ! Component: 200 - total flux cleaned = 0.00393008 Jy ! Total flux subtracted in 200 components = 0.00393008 Jy ! Clean residual min=-0.001844 max=0.001975 Jy/beam ! Clean residual mean=-0.000024 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.141881 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 49 model components to the UV plane model. ! The established model now contains 176 components and 0.141881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060910Jy sigma=0.991932 ! Fit after self-cal, rms=0.060919Jy sigma=0.991865 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060919Jy sigma=0.991865 ! Fit after self-cal, rms=0.061822Jy sigma=0.990314 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061822Jy sigma=0.990314 ! Fit after self-cal, rms=0.061847Jy sigma=0.990186 ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=9.117 mas, bpa=-9.305 degrees ! Estimated noise=0.689048 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209378 Jy ! Component: 100 - total flux cleaned = 0.0027994 Jy ! Component: 150 - total flux cleaned = 0.00312298 Jy ! Component: 200 - total flux cleaned = 0.00336944 Jy ! Total flux subtracted in 200 components = 0.00336944 Jy ! Clean residual min=-0.001829 max=0.002070 Jy/beam ! Clean residual mean=-0.000010 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.145251 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 203 components and 0.145251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061757Jy sigma=0.988636 ! Fit after self-cal, rms=0.061762Jy sigma=0.988581 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.783 mas, bmaj=14.07 mas, bpa=-3.473 degrees ! Estimated noise=0.860965 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000692203 Jy ! Component: 100 - total flux cleaned = 0.000872194 Jy ! Component: 150 - total flux cleaned = 0.00093356 Jy ! Component: 200 - total flux cleaned = 0.00106608 Jy ! Total flux subtracted in 200 components = 0.00106608 Jy ! Clean residual min=-0.001944 max=0.002146 Jy/beam ! Clean residual mean=-0.000027 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.146317 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 223 components and 0.146317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061759Jy sigma=0.988326 ! Fit after self-cal, rms=0.061756Jy sigma=0.988279 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.697 mas, bmaj=7.739 mas, bpa=-8.276 degrees ! Estimated noise=0.899892 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0894642 Jy ! Component: 100 - total flux cleaned = 0.110447 Jy ! Component: 150 - total flux cleaned = 0.121507 Jy ! Component: 200 - total flux cleaned = 0.128599 Jy ! Total flux subtracted in 200 components = 0.128599 Jy ! Clean residual min=-0.003414 max=0.004120 Jy/beam ! Clean residual mean=0.000014 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.128599 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.128599 Jy ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=9.117 mas, bpa=-9.305 degrees ! Estimated noise=0.689048 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00709462 Jy ! Component: 100 - total flux cleaned = 0.0114337 Jy ! Component: 150 - total flux cleaned = 0.0138651 Jy ! Component: 200 - total flux cleaned = 0.0151866 Jy ! Total flux subtracted in 200 components = 0.0151866 Jy ! Clean residual min=-0.002169 max=0.002359 Jy/beam ! Clean residual mean=-0.000005 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.143785 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 106 components and 0.143785 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.783 mas, bmaj=14.07 mas, bpa=-3.473 degrees ! Estimated noise=0.860965 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206672 Jy ! Component: 100 - total flux cleaned = 0.0023303 Jy ! Component: 150 - total flux cleaned = 0.00248735 Jy ! Component: 200 - total flux cleaned = 0.00270279 Jy ! Total flux subtracted in 200 components = 0.00270279 Jy ! Clean residual min=-0.002033 max=0.002124 Jy/beam ! Clean residual mean=-0.000028 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.146488 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 142 components and 0.146488 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=9.117 mas, bpa=-9.305 degrees ! Estimated noise=0.689048 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000848991 Jy ! Component: 100 - total flux cleaned = -0.000781488 Jy ! Component: 150 - total flux cleaned = -0.000677329 Jy ! Component: 200 - total flux cleaned = -0.000538725 Jy ! Total flux subtracted in 200 components = -0.000538725 Jy ! Clean residual min=-0.001794 max=0.002122 Jy/beam ! Clean residual mean=-0.000013 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.145949 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 168 components and 0.145949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061806Jy sigma=0.989182 ! Fit after self-cal, rms=0.061802Jy sigma=0.989123 wmodel J0517-0520_S_2005_06_01_yyk\_map.mod ! Writing 168 model components to file: J0517-0520_S_2005_06_01_yyk_map.mod wobs J0517-0520_S_2005_06_01_yyk\_uvs.fits ! Writing UV FITS file: J0517-0520_S_2005_06_01_yyk_uvs.fits wwins J0517-0520_S_2005_06_01_yyk\_map.win ! wwins: Wrote 3 windows to J0517-0520_S_2005_06_01_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000854543 Jy ! Component: 100 - total flux cleaned = 0.00119081 Jy ! Component: 150 - total flux cleaned = 0.0012547 Jy ! Component: 200 - total flux cleaned = 0.00125416 Jy ! Component: 250 - total flux cleaned = 0.001342 Jy ! Component: 300 - total flux cleaned = 0.00137036 Jy ! Component: 350 - total flux cleaned = 0.00142635 Jy ! Component: 400 - total flux cleaned = 0.00150805 Jy ! Component: 450 - total flux cleaned = 0.00156203 Jy ! Component: 500 - total flux cleaned = 0.00174634 Jy ! Component: 550 - total flux cleaned = 0.0018494 Jy ! Component: 600 - total flux cleaned = 0.00197577 Jy ! Component: 650 - total flux cleaned = 0.0020744 Jy ! Component: 700 - total flux cleaned = 0.00222063 Jy ! Component: 750 - total flux cleaned = 0.00234039 Jy ! Component: 800 - total flux cleaned = 0.00248208 Jy ! Component: 850 - total flux cleaned = 0.00264413 Jy ! Component: 900 - total flux cleaned = 0.00268964 Jy ! Component: 950 - total flux cleaned = 0.00293716 Jy ! Component: 1000 - total flux cleaned = 0.00295946 Jy ! Component: 1050 - total flux cleaned = 0.00315629 Jy ! Component: 1100 - total flux cleaned = 0.00330728 Jy ! Component: 1150 - total flux cleaned = 0.00343502 Jy ! Component: 1200 - total flux cleaned = 0.00358235 Jy ! Component: 1250 - total flux cleaned = 0.00374889 Jy ! Component: 1300 - total flux cleaned = 0.00387214 Jy ! Component: 1350 - total flux cleaned = 0.00395321 Jy ! Component: 1400 - total flux cleaned = 0.00411365 Jy ! Component: 1450 - total flux cleaned = 0.00417338 Jy ! Component: 1500 - total flux cleaned = 0.00427147 Jy ! Component: 1550 - total flux cleaned = 0.00438772 Jy ! Component: 1600 - total flux cleaned = 0.00442609 Jy ! Component: 1650 - total flux cleaned = 0.00450201 Jy ! Component: 1700 - total flux cleaned = 0.00468966 Jy ! Component: 1750 - total flux cleaned = 0.00478238 Jy ! Component: 1800 - total flux cleaned = 0.00485559 Jy ! Component: 1850 - total flux cleaned = 0.00500105 Jy ! Component: 1900 - total flux cleaned = 0.00509099 Jy ! Component: 1950 - total flux cleaned = 0.00518037 Jy ! Component: 2000 - total flux cleaned = 0.00528649 Jy ! Total flux subtracted in 2048 components = 0.0053043 Jy ! Clean residual min=-0.001191 max=0.001074 Jy/beam ! Clean residual mean=-0.000003 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.151254 Jy keep ! Adding 136 model components to the UV plane model. ! The established model now contains 304 components and 0.151254 Jy ![Exited script file: muppet] wmap "J0517-0520_S_2005_06_01_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.324 x 9.117 at -9.305 degrees (North through East) ! Clean map min=-0.0016964 max=0.10607 Jy/beam ! Writing clean map to FITS file: J0517-0520_S_2005_06_01_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.106072 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00035797 device "J0517-0520_S_2005_06_01_yyk\_map.eps/VPS" ! Attempting to open device: 'J0517-0520_S_2005_06_01_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01244 1.01244 2.02488 4.04976 8.09952 16.199 32.3981 64.7961 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.106 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.324 x 9.117 at -9.305 degrees (North through East) ! Clean map min=-0.0016964 max=0.10607 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0517-0520_S_2005_06_01_yyk\_map.gif/gif" ! Attempting to open device: 'J0517-0520_S_2005_06_01_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0517-0520_S_2005_06_01_yyk_uvs.log closed on Sat Oct 8 16:58:11 2005