! Started logfile: J0432-1614_X_2005_05_12_yyk_uvs.log on Sat Oct 8 16:56:26 2005 obs J0432-1614_X_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J0432-1614_X_2005_05_12_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.890909 visibilities/baseline/integration-bin. ! Found source: J0432-1614 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1438 lines of history. ! ! Reading 1764 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0432-1614_X_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.319429 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7289 mas, bmaj=1.746 mas, bpa=1.275 degrees ! Estimated noise=1.49232 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.262677 Jy ! Component: 100 - total flux cleaned = 0.314913 Jy ! Total flux subtracted in 100 components = 0.314913 Jy ! Clean residual min=-0.012940 max=0.017226 Jy/beam ! Clean residual mean=-0.000067 rms=0.003531 Jy/beam ! Combined flux in latest and established models = 0.314913 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.314913 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.105070Jy sigma=1.324499 ! Fit after self-cal, rms=0.104645Jy sigma=1.317652 ! Inverting map and beam ! Estimated beam: bmin=0.7289 mas, bmaj=1.746 mas, bpa=1.275 degrees ! Estimated noise=1.49232 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9088 mas, bmaj=2.155 mas, bpa=-0.7884 degrees ! Estimated noise=1.03948 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0193917 Jy ! Component: 100 - total flux cleaned = 0.0244172 Jy ! Component: 150 - total flux cleaned = 0.0248253 Jy ! Component: 200 - total flux cleaned = 0.0250453 Jy ! Total flux subtracted in 200 components = 0.0250453 Jy ! Clean residual min=-0.011000 max=0.011498 Jy/beam ! Clean residual mean=-0.000116 rms=0.003136 Jy/beam ! Combined flux in latest and established models = 0.339959 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 20 components and 0.339959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104252Jy sigma=1.266536 ! Fit after self-cal, rms=0.104227Jy sigma=1.266330 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9088 x 2.155 at -0.7884 degrees (North through East) ! Clean map min=-0.010746 max=0.31065 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.971349 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.93 HN 1.50 KP 0.94 ! LA 1.18 MK 0.98 NL 0.96 OV 0.99 ! PT 0.93 SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.968849 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 1.48 KP 0.88 ! LA 1.18 MK 0.98 NL 0.94 OV 0.98 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.948424 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.60 KP 0.86 ! LA 1.15 MK 1.02 NL 0.94 OV 1.00 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.920661 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 1.67 KP 0.97 ! LA 1.11 MK 1.05 NL 0.95 OV 1.05 ! PT 1.05 SC 1.00 ! ! ! Fit before self-cal, rms=0.104227Jy sigma=1.266330 ! Fit after self-cal, rms=0.098727Jy sigma=1.181237 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098727Jy sigma=1.181237 ! Fit after self-cal, rms=0.098740Jy sigma=1.181035 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9148 mas, bmaj=2.134 mas, bpa=-0.5005 degrees ! Estimated noise=0.937199 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0242816 Jy ! Component: 100 - total flux cleaned = -0.0297505 Jy ! Component: 150 - total flux cleaned = -0.0307892 Jy ! Component: 200 - total flux cleaned = -0.0308548 Jy ! Total flux subtracted in 200 components = -0.0308548 Jy ! Clean residual min=-0.003794 max=0.003613 Jy/beam ! Clean residual mean=0.000015 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.309104 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 33 components and 0.309104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094136Jy sigma=1.062645 ! Fit after self-cal, rms=0.094122Jy sigma=1.062476 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094122Jy sigma=1.062476 ! Fit after self-cal, rms=0.091767Jy sigma=1.026420 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000149619 Jy ! Component: 100 - total flux cleaned = 4.46707e-05 Jy ! Component: 150 - total flux cleaned = -4.63278e-05 Jy ! Component: 200 - total flux cleaned = -0.000125226 Jy ! Total flux subtracted in 200 components = -0.000125226 Jy ! Clean residual min=-0.003607 max=0.003454 Jy/beam ! Clean residual mean=0.000013 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.308979 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.308979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091749Jy sigma=1.025429 ! Fit after self-cal, rms=0.091712Jy sigma=1.022763 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9148 x 2.134 at -0.5005 degrees (North through East) ! Clean map min=-0.0035549 max=0.28485 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091712Jy sigma=1.022763 ! Fit after self-cal, rms=0.092096Jy sigma=0.993720 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092096Jy sigma=0.993720 ! Fit after self-cal, rms=0.092194Jy sigma=0.993384 ! Inverting map and beam ! Estimated beam: bmin=0.9152 mas, bmaj=2.129 mas, bpa=-0.4105 degrees ! Estimated noise=0.937001 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000306599 Jy ! Component: 100 - total flux cleaned = 0.000275507 Jy ! Component: 150 - total flux cleaned = 0.00024559 Jy ! Component: 200 - total flux cleaned = 0.000192018 Jy ! Total flux subtracted in 200 components = 0.000192018 Jy ! Clean residual min=-0.003505 max=0.003400 Jy/beam ! Clean residual mean=-0.000002 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.309171 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 44 components and 0.309171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092192Jy sigma=0.992917 ! Fit after self-cal, rms=0.092250Jy sigma=0.992849 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092250Jy sigma=0.992849 ! Fit after self-cal, rms=0.090573Jy sigma=0.972309 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090573Jy sigma=0.972309 ! Fit after self-cal, rms=0.090606Jy sigma=0.972283 ! Inverting map and beam ! Estimated beam: bmin=0.9144 mas, bmaj=2.124 mas, bpa=-0.3821 degrees ! Estimated noise=0.936411 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000238499 Jy ! Component: 100 - total flux cleaned = 0.000266604 Jy ! Component: 150 - total flux cleaned = 0.000292044 Jy ! Component: 200 - total flux cleaned = 0.00031608 Jy ! Total flux subtracted in 200 components = 0.00031608 Jy ! Clean residual min=-0.003403 max=0.003375 Jy/beam ! Clean residual mean=-0.000002 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.309487 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.309487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090604Jy sigma=0.971955 ! Fit after self-cal, rms=0.090620Jy sigma=0.971942 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.373 mas, bmaj=4.571 mas, bpa=8.836 degrees ! Estimated noise=1.17327 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206651 Jy ! Component: 100 - total flux cleaned = 0.000194431 Jy ! Component: 150 - total flux cleaned = 0.000159576 Jy ! Component: 200 - total flux cleaned = 0.000130456 Jy ! Total flux subtracted in 200 components = 0.000130456 Jy ! Clean residual min=-0.003226 max=0.003600 Jy/beam ! Clean residual mean=-0.000001 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.309617 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 54 components and 0.309617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090620Jy sigma=0.971944 ! Fit after self-cal, rms=0.090632Jy sigma=0.971914 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7279 mas, bmaj=1.725 mas, bpa=1.493 degrees ! Estimated noise=1.37206 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.242614 Jy ! Component: 100 - total flux cleaned = 0.292004 Jy ! Component: 150 - total flux cleaned = 0.305583 Jy ! Component: 200 - total flux cleaned = 0.308888 Jy ! Total flux subtracted in 200 components = 0.308888 Jy ! Clean residual min=-0.005880 max=0.005108 Jy/beam ! Clean residual mean=-0.000007 rms=0.001390 Jy/beam ! Combined flux in latest and established models = 0.308888 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.308888 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9144 mas, bmaj=2.124 mas, bpa=-0.3821 degrees ! Estimated noise=0.936411 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140435 Jy ! Component: 100 - total flux cleaned = 0.00134831 Jy ! Component: 150 - total flux cleaned = 0.00130074 Jy ! Component: 200 - total flux cleaned = 0.00114853 Jy ! Total flux subtracted in 200 components = 0.00114853 Jy ! Clean residual min=-0.003577 max=0.003424 Jy/beam ! Clean residual mean=-0.000003 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.310037 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 21 components and 0.310037 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.373 mas, bmaj=4.571 mas, bpa=8.836 degrees ! Estimated noise=1.17327 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159889 Jy ! Component: 100 - total flux cleaned = 0.000117771 Jy ! Component: 150 - total flux cleaned = 8.27162e-05 Jy ! Component: 200 - total flux cleaned = 5.24429e-05 Jy ! Total flux subtracted in 200 components = 5.24429e-05 Jy ! Clean residual min=-0.003218 max=0.003605 Jy/beam ! Clean residual mean=-0.000002 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.310089 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 24 components and 0.310089 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9144 mas, bmaj=2.124 mas, bpa=-0.3821 degrees ! Estimated noise=0.936411 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000249793 Jy ! Component: 100 - total flux cleaned = -0.00021695 Jy ! Component: 150 - total flux cleaned = -0.000241344 Jy ! Component: 200 - total flux cleaned = -0.00028368 Jy ! Total flux subtracted in 200 components = -0.00028368 Jy ! Clean residual min=-0.003516 max=0.003355 Jy/beam ! Clean residual mean=-0.000003 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.309806 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 27 components and 0.309806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090646Jy sigma=0.971882 ! Fit after self-cal, rms=0.090651Jy sigma=0.971834 wmodel J0432-1614_X_2005_05_12_yyk\_map.mod ! Writing 27 model components to file: J0432-1614_X_2005_05_12_yyk_map.mod wobs J0432-1614_X_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J0432-1614_X_2005_05_12_yyk_uvs.fits wwins J0432-1614_X_2005_05_12_yyk\_map.win ! wwins: Wrote 1 windows to J0432-1614_X_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000117584 Jy ! Component: 100 - total flux cleaned = -0.000159309 Jy ! Component: 150 - total flux cleaned = -0.000159258 Jy ! Component: 200 - total flux cleaned = -0.000257941 Jy ! Component: 250 - total flux cleaned = -0.000258719 Jy ! Component: 300 - total flux cleaned = -0.000169535 Jy ! Component: 350 - total flux cleaned = -0.000169265 Jy ! Component: 400 - total flux cleaned = -8.64642e-05 Jy ! Component: 450 - total flux cleaned = -0.000167749 Jy ! Component: 500 - total flux cleaned = -0.000207307 Jy ! Component: 550 - total flux cleaned = -0.000207262 Jy ! Component: 600 - total flux cleaned = -0.000206279 Jy ! Component: 650 - total flux cleaned = -0.000169673 Jy ! Component: 700 - total flux cleaned = -0.000169949 Jy ! Component: 750 - total flux cleaned = -0.000339437 Jy ! Component: 800 - total flux cleaned = -0.000405172 Jy ! Component: 850 - total flux cleaned = -0.00056803 Jy ! Component: 900 - total flux cleaned = -0.000726317 Jy ! Component: 950 - total flux cleaned = -0.000695143 Jy ! Component: 1000 - total flux cleaned = -0.000695298 Jy ! Component: 1050 - total flux cleaned = -0.000695466 Jy ! Component: 1100 - total flux cleaned = -0.000725206 Jy ! Component: 1150 - total flux cleaned = -0.000783075 Jy ! Component: 1200 - total flux cleaned = -0.000782746 Jy ! Component: 1250 - total flux cleaned = -0.000698182 Jy ! Component: 1300 - total flux cleaned = -0.000782076 Jy ! Component: 1350 - total flux cleaned = -0.000754516 Jy ! Component: 1400 - total flux cleaned = -0.000700821 Jy ! Component: 1450 - total flux cleaned = -0.000674213 Jy ! Component: 1500 - total flux cleaned = -0.000727012 Jy ! Component: 1550 - total flux cleaned = -0.000701182 Jy ! Component: 1600 - total flux cleaned = -0.000649652 Jy ! Component: 1650 - total flux cleaned = -0.000497693 Jy ! Component: 1700 - total flux cleaned = -0.000472656 Jy ! Component: 1750 - total flux cleaned = -0.000422816 Jy ! Component: 1800 - total flux cleaned = -0.000299923 Jy ! Component: 1850 - total flux cleaned = -0.000130335 Jy ! Component: 1900 - total flux cleaned = -0.000130129 Jy ! Component: 1950 - total flux cleaned = -1.18268e-05 Jy ! Component: 2000 - total flux cleaned = 0.0001514 Jy ! Total flux subtracted in 2048 components = 0.000174758 Jy ! Clean residual min=-0.001381 max=0.001148 Jy/beam ! Clean residual mean=-0.000001 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.30998 Jy keep ! Adding 141 model components to the UV plane model. ! The established model now contains 168 components and 0.30998 Jy ![Exited script file: muppet] wmap "J0432-1614_X_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9144 x 2.124 at -0.3821 degrees (North through East) ! Clean map min=-0.0024561 max=0.28357 Jy/beam ! Writing clean map to FITS file: J0432-1614_X_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.283566 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000433887 device "J0432-1614_X_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0432-1614_X_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.459033 0.459033 0.918066 1.83613 3.67226 7.34453 14.6891 29.3781 58.7562 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.283 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9144 x 2.124 at -0.3821 degrees (North through East) ! Clean map min=-0.0024561 max=0.28357 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0432-1614_X_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0432-1614_X_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0432-1614_X_2005_05_12_yyk_uvs.log closed on Sat Oct 8 16:56:30 2005