! Started logfile: J0432-1614_S_2005_05_12_yyk_uvs.log on Sat Oct 8 16:56:21 2005 obs J0432-1614_S_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J0432-1614_S_2005_05_12_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.890909 visibilities/baseline/integration-bin. ! Found source: J0432-1614 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1442 lines of history. ! ! Reading 1764 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0432-1614_S_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.169213 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.572 mas, bmaj=6.531 mas, bpa=0.484 degrees ! Estimated noise=1.49913 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.123267 Jy ! Component: 100 - total flux cleaned = 0.140907 Jy ! Total flux subtracted in 100 components = 0.140907 Jy ! Clean residual min=-0.006995 max=0.007953 Jy/beam ! Clean residual mean=-0.000078 rms=0.002110 Jy/beam ! Combined flux in latest and established models = 0.140907 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.140907 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.088683Jy sigma=1.126206 ! Fit after self-cal, rms=0.088504Jy sigma=1.121459 ! Inverting map and beam ! Estimated beam: bmin=2.572 mas, bmaj=6.531 mas, bpa=0.484 degrees ! Estimated noise=1.49913 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.398 mas, bmaj=7.927 mas, bpa=-0.426 degrees ! Estimated noise=1.09286 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00683612 Jy ! Component: 100 - total flux cleaned = 0.00936877 Jy ! Component: 150 - total flux cleaned = 0.0098423 Jy ! Component: 200 - total flux cleaned = 0.00988375 Jy ! Total flux subtracted in 200 components = 0.00988375 Jy ! Clean residual min=-0.005471 max=0.006404 Jy/beam ! Clean residual mean=-0.000197 rms=0.001696 Jy/beam ! Combined flux in latest and established models = 0.150791 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.150791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088312Jy sigma=1.114388 ! Fit after self-cal, rms=0.088312Jy sigma=1.114226 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.398 x 7.927 at -0.426 degrees (North through East) ! Clean map min=-0.005477 max=0.14073 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.98849 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.05 HN 1.17 KP 0.98 ! LA 1.02 MK 0.99 NL 0.93 OV 1.08 ! PT 1.05 SC 0.89 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.979375 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.13 HN 1.09 KP 0.90 ! LA 1.01 MK 1.09 NL 0.99 OV 0.96 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.088312Jy sigma=1.114226 ! Fit after self-cal, rms=0.087172Jy sigma=1.103825 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087172Jy sigma=1.103825 ! Fit after self-cal, rms=0.087170Jy sigma=1.103674 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.391 mas, bmaj=7.862 mas, bpa=0.6283 degrees ! Estimated noise=1.08477 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000619682 Jy ! Component: 100 - total flux cleaned = -0.000542219 Jy ! Component: 150 - total flux cleaned = -0.000508419 Jy ! Component: 200 - total flux cleaned = -0.000535082 Jy ! Total flux subtracted in 200 components = -0.000535082 Jy ! Clean residual min=-0.005470 max=0.006003 Jy/beam ! Clean residual mean=-0.000173 rms=0.001491 Jy/beam ! Combined flux in latest and established models = 0.150256 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.150256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087114Jy sigma=1.103061 ! Fit after self-cal, rms=0.087118Jy sigma=1.102925 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087118Jy sigma=1.102925 ! Fit after self-cal, rms=0.084517Jy sigma=1.060552 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000828616 Jy ! Component: 100 - total flux cleaned = 0.000889388 Jy ! Component: 150 - total flux cleaned = 0.000889285 Jy ! Component: 200 - total flux cleaned = 0.000866349 Jy ! Total flux subtracted in 200 components = 0.000866349 Jy ! Clean residual min=-0.005509 max=0.005658 Jy/beam ! Clean residual mean=-0.000147 rms=0.001441 Jy/beam ! Combined flux in latest and established models = 0.151122 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.151122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084466Jy sigma=1.060116 ! Fit after self-cal, rms=0.084106Jy sigma=1.055529 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.391 x 7.862 at 0.6283 degrees (North through East) ! Clean map min=-0.0054419 max=0.1417 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084106Jy sigma=1.055529 ! Fit after self-cal, rms=0.084672Jy sigma=1.048350 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084672Jy sigma=1.048350 ! Fit after self-cal, rms=0.084684Jy sigma=1.047479 ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=7.786 mas, bpa=0.5346 degrees ! Estimated noise=1.09326 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184077 Jy ! Component: 100 - total flux cleaned = 0.0018425 Jy ! Component: 150 - total flux cleaned = 0.00183973 Jy ! Component: 200 - total flux cleaned = 0.00178581 Jy ! Total flux subtracted in 200 components = 0.00178581 Jy ! Clean residual min=-0.005469 max=0.005705 Jy/beam ! Clean residual mean=-0.000077 rms=0.001481 Jy/beam ! Combined flux in latest and established models = 0.152908 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.152908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084604Jy sigma=1.046788 ! Fit after self-cal, rms=0.084643Jy sigma=1.046549 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084643Jy sigma=1.046549 ! Fit after self-cal, rms=0.084626Jy sigma=1.037556 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084626Jy sigma=1.037556 ! Fit after self-cal, rms=0.084650Jy sigma=1.037430 ! Inverting map and beam ! Estimated beam: bmin=3.372 mas, bmaj=7.739 mas, bpa=0.6016 degrees ! Estimated noise=1.10005 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160489 Jy ! Component: 100 - total flux cleaned = 0.00170403 Jy ! Component: 150 - total flux cleaned = 0.00172829 Jy ! Component: 200 - total flux cleaned = 0.00175223 Jy ! Total flux subtracted in 200 components = 0.00175223 Jy ! Clean residual min=-0.005499 max=0.005697 Jy/beam ! Clean residual mean=-0.000086 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 0.15466 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 39 components and 0.15466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084609Jy sigma=1.036966 ! Fit after self-cal, rms=0.084628Jy sigma=1.036925 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.175 mas, bmaj=15.95 mas, bpa=10.94 degrees ! Estimated noise=1.36502 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000870476 Jy ! Component: 100 - total flux cleaned = 0.000988427 Jy ! Component: 150 - total flux cleaned = 0.00113512 Jy ! Component: 200 - total flux cleaned = 0.00122055 Jy ! Total flux subtracted in 200 components = 0.00122055 Jy ! Clean residual min=-0.006185 max=0.005969 Jy/beam ! Clean residual mean=-0.000174 rms=0.002080 Jy/beam ! Combined flux in latest and established models = 0.155881 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.155881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084750Jy sigma=1.037420 ! Fit after self-cal, rms=0.084729Jy sigma=1.037276 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.565 mas, bmaj=6.467 mas, bpa=0.9181 degrees ! Estimated noise=1.49582 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.124556 Jy ! Component: 100 - total flux cleaned = 0.143817 Jy ! Component: 150 - total flux cleaned = 0.148187 Jy ! Component: 200 - total flux cleaned = 0.149104 Jy ! Total flux subtracted in 200 components = 0.149104 Jy ! Clean residual min=-0.006273 max=0.006991 Jy/beam ! Clean residual mean=-0.000036 rms=0.001817 Jy/beam ! Combined flux in latest and established models = 0.149104 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.149104 Jy ! Inverting map and beam ! Estimated beam: bmin=3.372 mas, bmaj=7.739 mas, bpa=0.6016 degrees ! Estimated noise=1.10005 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00377238 Jy ! Component: 100 - total flux cleaned = 0.00453298 Jy ! Component: 150 - total flux cleaned = 0.00486316 Jy ! Component: 200 - total flux cleaned = 0.004958 Jy ! Total flux subtracted in 200 components = 0.004958 Jy ! Clean residual min=-0.005393 max=0.005730 Jy/beam ! Clean residual mean=-0.000083 rms=0.001514 Jy/beam ! Combined flux in latest and established models = 0.154062 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.154062 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.175 mas, bmaj=15.95 mas, bpa=10.94 degrees ! Estimated noise=1.36502 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109067 Jy ! Component: 100 - total flux cleaned = 0.00129956 Jy ! Component: 150 - total flux cleaned = 0.00147301 Jy ! Component: 200 - total flux cleaned = 0.00157081 Jy ! Total flux subtracted in 200 components = 0.00157081 Jy ! Clean residual min=-0.006138 max=0.006008 Jy/beam ! Clean residual mean=-0.000172 rms=0.002096 Jy/beam ! Combined flux in latest and established models = 0.155632 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.155632 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.372 mas, bmaj=7.739 mas, bpa=0.6016 degrees ! Estimated noise=1.10005 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00074671 Jy ! Component: 100 - total flux cleaned = -0.000796287 Jy ! Component: 150 - total flux cleaned = -0.000754357 Jy ! Component: 200 - total flux cleaned = -0.000752182 Jy ! Total flux subtracted in 200 components = -0.000752182 Jy ! Clean residual min=-0.005426 max=0.005692 Jy/beam ! Clean residual mean=-0.000087 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 0.15488 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.15488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084606Jy sigma=1.036862 ! Fit after self-cal, rms=0.084628Jy sigma=1.036793 wmodel J0432-1614_S_2005_05_12_yyk\_map.mod ! Writing 44 model components to file: J0432-1614_S_2005_05_12_yyk_map.mod wobs J0432-1614_S_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J0432-1614_S_2005_05_12_yyk_uvs.fits wwins J0432-1614_S_2005_05_12_yyk\_map.win ! wwins: Wrote 1 windows to J0432-1614_S_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.46495e-05 Jy ! Component: 100 - total flux cleaned = 1.63689e-05 Jy ! Component: 150 - total flux cleaned = 0.000257104 Jy ! Component: 200 - total flux cleaned = 0.000109069 Jy ! Component: 250 - total flux cleaned = 0.000178312 Jy ! Component: 300 - total flux cleaned = 0.00031247 Jy ! Component: 350 - total flux cleaned = 0.000375495 Jy ! Component: 400 - total flux cleaned = 0.000309839 Jy ! Component: 450 - total flux cleaned = 0.000125957 Jy ! Component: 500 - total flux cleaned = -5.14926e-05 Jy ! Component: 550 - total flux cleaned = -0.000338041 Jy ! Component: 600 - total flux cleaned = -0.000618162 Jy ! Component: 650 - total flux cleaned = -0.000782223 Jy ! Component: 700 - total flux cleaned = -0.00067734 Jy ! Component: 750 - total flux cleaned = -0.00067793 Jy ! Component: 800 - total flux cleaned = -0.000577257 Jy ! Component: 850 - total flux cleaned = -0.000577417 Jy ! Component: 900 - total flux cleaned = -0.000819367 Jy ! Component: 950 - total flux cleaned = -0.000913783 Jy ! Component: 1000 - total flux cleaned = -0.0010531 Jy ! Component: 1050 - total flux cleaned = -0.00114439 Jy ! Component: 1100 - total flux cleaned = -0.00136851 Jy ! Component: 1150 - total flux cleaned = -0.00154491 Jy ! Component: 1200 - total flux cleaned = -0.001804 Jy ! Component: 1250 - total flux cleaned = -0.00188951 Jy ! Component: 1300 - total flux cleaned = -0.00226738 Jy ! Component: 1350 - total flux cleaned = -0.0024327 Jy ! Component: 1400 - total flux cleaned = -0.00279897 Jy ! Component: 1450 - total flux cleaned = -0.00307914 Jy ! Component: 1500 - total flux cleaned = -0.0032768 Jy ! Component: 1550 - total flux cleaned = -0.00354919 Jy ! Component: 1600 - total flux cleaned = -0.00366331 Jy ! Component: 1650 - total flux cleaned = -0.00385279 Jy ! Component: 1700 - total flux cleaned = -0.00407709 Jy ! Component: 1750 - total flux cleaned = -0.00429813 Jy ! Component: 1800 - total flux cleaned = -0.0044432 Jy ! Component: 1850 - total flux cleaned = -0.0046588 Jy ! Component: 1900 - total flux cleaned = -0.00487091 Jy ! Component: 1950 - total flux cleaned = -0.0050811 Jy ! Component: 2000 - total flux cleaned = -0.00518509 Jy ! Total flux subtracted in 2048 components = -0.00539059 Jy ! Clean residual min=-0.002016 max=0.001699 Jy/beam ! Clean residual mean=-0.000018 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.14949 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 174 components and 0.14949 Jy ![Exited script file: muppet] wmap "J0432-1614_S_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.372 x 7.739 at 0.6016 degrees (North through East) ! Clean map min=-0.0048147 max=0.1432 Jy/beam ! Writing clean map to FITS file: J0432-1614_S_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.143199 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000708653 device "J0432-1614_S_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0432-1614_S_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.48462 1.48462 2.96923 5.93846 11.8769 23.7539 47.5077 95.0154 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.143 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.372 x 7.739 at 0.6016 degrees (North through East) ! Clean map min=-0.0048147 max=0.1432 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0432-1614_S_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0432-1614_S_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0432-1614_S_2005_05_12_yyk_uvs.log closed on Sat Oct 8 16:56:26 2005