! Started logfile: J0431-0406_X_2005_06_30_yyk_uvs.log on Sat Oct 8 16:56:17 2005 obs J0431-0406_X_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J0431-0406_X_2005_06_30_yyk_uve.fits ! AN table 1: 17 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.921569 visibilities/baseline/integration-bin. ! Found source: J0431-0406 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1459 lines of history. ! ! Reading 2820 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0431-0406_X_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.135551 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7059 mas, bmaj=1.793 mas, bpa=-2.024 degrees ! Estimated noise=1.05246 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.098371 Jy ! Component: 100 - total flux cleaned = 0.116665 Jy ! Total flux subtracted in 100 components = 0.116665 Jy ! Clean residual min=-0.004903 max=0.005384 Jy/beam ! Clean residual mean=-0.000019 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 0.116665 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.116665 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.068148Jy sigma=1.059647 ! Fit after self-cal, rms=0.068042Jy sigma=1.057001 ! Inverting map and beam ! Estimated beam: bmin=0.7059 mas, bmaj=1.793 mas, bpa=-2.024 degrees ! Estimated noise=1.05246 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9111 mas, bmaj=2.153 mas, bpa=-2.055 degrees ! Estimated noise=0.691126 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00807666 Jy ! Component: 100 - total flux cleaned = 0.01097 Jy ! Component: 150 - total flux cleaned = 0.0120192 Jy ! Component: 200 - total flux cleaned = 0.0120182 Jy ! Total flux subtracted in 200 components = 0.0120182 Jy ! Clean residual min=-0.002918 max=0.002798 Jy/beam ! Clean residual mean=-0.000004 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.128683 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 27 components and 0.128683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067469Jy sigma=1.042475 ! Fit after self-cal, rms=0.067450Jy sigma=1.042297 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9111 x 2.153 at -2.055 degrees (North through East) ! Clean map min=-0.0027603 max=0.11648 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00505 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.02 KP 0.95 ! LA 1.00 MK 1.02 NL 1.04 OV 1.04 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01637 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.01 KP 0.95 ! LA 0.98 MK 0.99 NL 1.00 OV 1.00 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00697 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.06 HN 0.90 KP 0.84 ! LA 0.99 MK 1.09 NL 0.99 OV 1.02 ! PT 1.07 SC 0.95 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.970382 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 0.96 KP 0.98 ! LA 1.01 MK 1.00 NL 1.00 OV 1.03 ! PT 1.15 SC 1.18 ! ! ! Fit before self-cal, rms=0.067450Jy sigma=1.042297 ! Fit after self-cal, rms=0.066546Jy sigma=1.031165 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066546Jy sigma=1.031165 ! Fit after self-cal, rms=0.066541Jy sigma=1.031094 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9172 mas, bmaj=2.166 mas, bpa=-2.006 degrees ! Estimated noise=0.690416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181896 Jy ! Component: 100 - total flux cleaned = 0.000183797 Jy ! Component: 150 - total flux cleaned = 0.000185274 Jy ! Component: 200 - total flux cleaned = 0.000205164 Jy ! Total flux subtracted in 200 components = 0.000205164 Jy ! Clean residual min=-0.002129 max=0.002322 Jy/beam ! Clean residual mean=-0.000003 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.128888 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.128888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066522Jy sigma=1.030691 ! Fit after self-cal, rms=0.066512Jy sigma=1.030584 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066512Jy sigma=1.030584 ! Fit after self-cal, rms=0.064138Jy sigma=0.985582 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000908199 Jy ! Component: 100 - total flux cleaned = 0.000956909 Jy ! Component: 150 - total flux cleaned = 0.000977692 Jy ! Component: 200 - total flux cleaned = 0.00101441 Jy ! Total flux subtracted in 200 components = 0.00101441 Jy ! Clean residual min=-0.002188 max=0.002217 Jy/beam ! Clean residual mean=-0.000003 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.129903 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.129903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064121Jy sigma=0.985132 ! Fit after self-cal, rms=0.064016Jy sigma=0.982331 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9172 x 2.166 at -2.006 degrees (North through East) ! Clean map min=-0.0022371 max=0.11737 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064016Jy sigma=0.982331 ! Fit after self-cal, rms=0.064917Jy sigma=0.975525 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064917Jy sigma=0.975525 ! Fit after self-cal, rms=0.064939Jy sigma=0.975227 ! Inverting map and beam ! Estimated beam: bmin=0.9102 mas, bmaj=2.167 mas, bpa=-2.147 degrees ! Estimated noise=0.688363 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000389314 Jy ! Component: 100 - total flux cleaned = 0.000524559 Jy ! Component: 150 - total flux cleaned = 0.000543946 Jy ! Component: 200 - total flux cleaned = 0.000561534 Jy ! Total flux subtracted in 200 components = 0.000561534 Jy ! Clean residual min=-0.002007 max=0.002271 Jy/beam ! Clean residual mean=-0.000003 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.130464 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.130464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064929Jy sigma=0.974954 ! Fit after self-cal, rms=0.064938Jy sigma=0.974897 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064938Jy sigma=0.974897 ! Fit after self-cal, rms=0.065930Jy sigma=0.965570 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065930Jy sigma=0.965570 ! Fit after self-cal, rms=0.065948Jy sigma=0.965471 ! Inverting map and beam ! Estimated beam: bmin=0.9075 mas, bmaj=2.168 mas, bpa=-2.334 degrees ! Estimated noise=0.690832 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000618613 Jy ! Component: 100 - total flux cleaned = 0.000655971 Jy ! Component: 150 - total flux cleaned = 0.000688148 Jy ! Component: 200 - total flux cleaned = 0.000688671 Jy ! Total flux subtracted in 200 components = 0.000688671 Jy ! Clean residual min=-0.002079 max=0.002378 Jy/beam ! Clean residual mean=-0.000004 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.131153 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 46 components and 0.131153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065939Jy sigma=0.965259 ! Fit after self-cal, rms=0.065946Jy sigma=0.965241 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.211 mas, bmaj=3.665 mas, bpa=-3.661 degrees ! Estimated noise=0.88629 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001549 Jy ! Component: 100 - total flux cleaned = 8.14518e-05 Jy ! Component: 150 - total flux cleaned = 2.98491e-05 Jy ! Component: 200 - total flux cleaned = -2.52404e-05 Jy ! Total flux subtracted in 200 components = -2.52404e-05 Jy ! Clean residual min=-0.002447 max=0.003028 Jy/beam ! Clean residual mean=-0.000007 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.131128 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.131128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065973Jy sigma=0.965372 ! Fit after self-cal, rms=0.065954Jy sigma=0.965194 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7056 mas, bmaj=1.802 mas, bpa=-2.255 degrees ! Estimated noise=1.05883 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.100203 Jy ! Component: 100 - total flux cleaned = 0.118909 Jy ! Component: 150 - total flux cleaned = 0.12617 Jy ! Component: 200 - total flux cleaned = 0.129677 Jy ! Total flux subtracted in 200 components = 0.129677 Jy ! Clean residual min=-0.004273 max=0.004252 Jy/beam ! Clean residual mean=-0.000016 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.129677 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.129677 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9075 mas, bmaj=2.168 mas, bpa=-2.334 degrees ! Estimated noise=0.690832 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100576 Jy ! Component: 100 - total flux cleaned = 0.00129818 Jy ! Component: 150 - total flux cleaned = 0.00134322 Jy ! Component: 200 - total flux cleaned = 0.00138219 Jy ! Total flux subtracted in 200 components = 0.00138219 Jy ! Clean residual min=-0.002140 max=0.002421 Jy/beam ! Clean residual mean=-0.000005 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.131059 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.131059 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.211 mas, bmaj=3.665 mas, bpa=-3.661 degrees ! Estimated noise=0.88629 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000265308 Jy ! Component: 100 - total flux cleaned = 0.000173606 Jy ! Component: 150 - total flux cleaned = 9.09132e-05 Jy ! Component: 200 - total flux cleaned = 4.02426e-05 Jy ! Total flux subtracted in 200 components = 4.02426e-05 Jy ! Clean residual min=-0.002476 max=0.003063 Jy/beam ! Clean residual mean=-0.000007 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.131099 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.131099 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9075 mas, bmaj=2.168 mas, bpa=-2.334 degrees ! Estimated noise=0.690832 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -9.6334e-05 Jy ! Component: 100 - total flux cleaned = -0.00017281 Jy ! Component: 150 - total flux cleaned = -0.000195858 Jy ! Component: 200 - total flux cleaned = -0.000195997 Jy ! Total flux subtracted in 200 components = -0.000195997 Jy ! Clean residual min=-0.002111 max=0.002404 Jy/beam ! Clean residual mean=-0.000004 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.130903 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 47 components and 0.130903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065970Jy sigma=0.965468 ! Fit after self-cal, rms=0.065966Jy sigma=0.965403 wmodel J0431-0406_X_2005_06_30_yyk\_map.mod ! Writing 47 model components to file: J0431-0406_X_2005_06_30_yyk_map.mod wobs J0431-0406_X_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J0431-0406_X_2005_06_30_yyk_uvs.fits wwins J0431-0406_X_2005_06_30_yyk\_map.win ! wwins: Wrote 1 windows to J0431-0406_X_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000956829 Jy ! Component: 100 - total flux cleaned = 0.00138795 Jy ! Component: 150 - total flux cleaned = 0.00149861 Jy ! Component: 200 - total flux cleaned = 0.00170868 Jy ! Component: 250 - total flux cleaned = 0.00174141 Jy ! Component: 300 - total flux cleaned = 0.00183848 Jy ! Component: 350 - total flux cleaned = 0.0017759 Jy ! Component: 400 - total flux cleaned = 0.00177605 Jy ! Component: 450 - total flux cleaned = 0.00174584 Jy ! Component: 500 - total flux cleaned = 0.00165731 Jy ! Component: 550 - total flux cleaned = 0.0016001 Jy ! Component: 600 - total flux cleaned = 0.0015158 Jy ! Component: 650 - total flux cleaned = 0.00137883 Jy ! Component: 700 - total flux cleaned = 0.00137898 Jy ! Component: 750 - total flux cleaned = 0.00129982 Jy ! Component: 800 - total flux cleaned = 0.00135144 Jy ! Component: 850 - total flux cleaned = 0.00117303 Jy ! Component: 900 - total flux cleaned = 0.001173 Jy ! Component: 950 - total flux cleaned = 0.00112379 Jy ! Component: 1000 - total flux cleaned = 0.00105016 Jy ! Component: 1050 - total flux cleaned = 0.000857545 Jy ! Component: 1100 - total flux cleaned = 0.000786592 Jy ! Component: 1150 - total flux cleaned = 0.000739191 Jy ! Component: 1200 - total flux cleaned = 0.000599767 Jy ! Component: 1250 - total flux cleaned = 0.000508202 Jy ! Component: 1300 - total flux cleaned = 0.000417742 Jy ! Component: 1350 - total flux cleaned = 0.000328006 Jy ! Component: 1400 - total flux cleaned = 0.00021755 Jy ! Component: 1450 - total flux cleaned = 8.63549e-05 Jy ! Component: 1500 - total flux cleaned = -4.36804e-05 Jy ! Component: 1550 - total flux cleaned = -0.000107907 Jy ! Component: 1600 - total flux cleaned = -0.000213922 Jy ! Component: 1650 - total flux cleaned = -0.00036032 Jy ! Component: 1700 - total flux cleaned = -0.000463914 Jy ! Component: 1750 - total flux cleaned = -0.00056638 Jy ! Component: 1800 - total flux cleaned = -0.000688233 Jy ! Component: 1850 - total flux cleaned = -0.000748878 Jy ! Component: 1900 - total flux cleaned = -0.000809082 Jy ! Component: 1950 - total flux cleaned = -0.00096727 Jy ! Component: 2000 - total flux cleaned = -0.00108487 Jy ! Total flux subtracted in 2048 components = -0.00120134 Jy ! Clean residual min=-0.001067 max=0.001101 Jy/beam ! Clean residual mean=-0.000003 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.129702 Jy keep ! Adding 158 model components to the UV plane model. ! The established model now contains 205 components and 0.129702 Jy ![Exited script file: muppet] wmap "J0431-0406_X_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9075 x 2.168 at -2.334 degrees (North through East) ! Clean map min=-0.0016084 max=0.11783 Jy/beam ! Writing clean map to FITS file: J0431-0406_X_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.117834 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00037191 device "J0431-0406_X_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0431-0406_X_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.946866 0.946866 1.89373 3.78746 7.57493 15.1499 30.2997 60.5994 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.117 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9075 x 2.168 at -2.334 degrees (North through East) ! Clean map min=-0.0016084 max=0.11783 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0431-0406_X_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0431-0406_X_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0431-0406_X_2005_06_30_yyk_uvs.log closed on Sat Oct 8 16:56:21 2005