! Started logfile: J0411-2756_X_2005_06_01_yyk_uvs.log on Sat Oct 8 16:55:35 2005 obs J0411-2756_X_2005_06_01_yyk_uve.fits ! Reading UV FITS file: J0411-2756_X_2005_06_01_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.319192 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0411-2756 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1618 lines of history. ! ! Reading 632 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0411-2756_X_2005_06_01_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.120101 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.469 mas, bmaj=6.835 mas, bpa=1.455 degrees ! Estimated noise=4.12398 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -0.2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0602721 Jy ! Component: 100 - total flux cleaned = 0.0763285 Jy ! Total flux subtracted in 100 components = 0.0763285 Jy ! Clean residual min=-0.015366 max=0.013221 Jy/beam ! Clean residual mean=0.000118 rms=0.004598 Jy/beam ! Combined flux in latest and established models = 0.0763285 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0763285 Jy ! ! Correcting IF 1. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.096071Jy sigma=1.250202 ! Fit after self-cal, rms=0.093358Jy sigma=1.167071 ! Inverting map and beam ! Estimated beam: bmin=2.47 mas, bmaj=6.837 mas, bpa=1.457 degrees ! Estimated noise=4.12102 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=7.596 mas, bpa=-1.029 degrees ! Estimated noise=2.68619 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122956 Jy ! Component: 100 - total flux cleaned = 0.0120067 Jy ! Component: 150 - total flux cleaned = 0.0114071 Jy ! Component: 200 - total flux cleaned = 0.0110261 Jy ! Total flux subtracted in 200 components = 0.0110261 Jy ! Clean residual min=-0.008567 max=0.010076 Jy/beam ! Clean residual mean=0.000149 rms=0.002366 Jy/beam ! Combined flux in latest and established models = 0.0873546 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 36 components and 0.0873546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092420Jy sigma=1.136487 ! Fit after self-cal, rms=0.092409Jy sigma=1.135847 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.972 x 7.596 at -1.029 degrees (North through East) ! Clean map min=-0.0086233 max=0.076137 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.092409Jy sigma=1.135847 ! Fit after self-cal, rms=0.091581Jy sigma=1.136999 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091581Jy sigma=1.136999 ! Fit after self-cal, rms=0.091376Jy sigma=1.133892 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=7.494 mas, bpa=-1.083 degrees ! Estimated noise=2.73467 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142969 Jy ! Component: 100 - total flux cleaned = 0.00101762 Jy ! Component: 150 - total flux cleaned = 0.000831403 Jy ! Component: 200 - total flux cleaned = 0.000661403 Jy ! Total flux subtracted in 200 components = 0.000661403 Jy ! Clean residual min=-0.008794 max=0.010524 Jy/beam ! Clean residual mean=0.000113 rms=0.002384 Jy/beam ! Combined flux in latest and established models = 0.088016 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 58 components and 0.088016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091338Jy sigma=1.130842 ! Fit after self-cal, rms=0.091291Jy sigma=1.130271 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091291Jy sigma=1.130271 ! Fit after self-cal, rms=0.076822Jy sigma=0.963385 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00816429 Jy ! Component: 100 - total flux cleaned = 0.00876523 Jy ! Component: 150 - total flux cleaned = 0.00901988 Jy ! Component: 200 - total flux cleaned = 0.00936298 Jy ! Total flux subtracted in 200 components = 0.00936298 Jy ! Clean residual min=-0.007317 max=0.008678 Jy/beam ! Clean residual mean=0.000076 rms=0.001977 Jy/beam ! Combined flux in latest and established models = 0.097379 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 81 components and 0.097379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075797Jy sigma=0.946901 ! Fit after self-cal, rms=0.074369Jy sigma=0.934074 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.934 x 7.494 at -1.083 degrees (North through East) ! Clean map min=-0.0079819 max=0.086399 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.316 mas, bmaj=8.086 mas, bpa=0.6055 degrees ! Estimated noise=2.77605 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000451805 Jy ! Component: 100 - total flux cleaned = 0.000545068 Jy ! Component: 150 - total flux cleaned = 0.000537704 Jy ! Component: 200 - total flux cleaned = 0.000457873 Jy ! Total flux subtracted in 200 components = 0.000457873 Jy ! Clean residual min=-0.006482 max=0.008066 Jy/beam ! Clean residual mean=0.000080 rms=0.001842 Jy/beam ! Combined flux in latest and established models = 0.0978368 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 89 components and 0.0978369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074188Jy sigma=0.930664 ! Fit after self-cal, rms=0.073901Jy sigma=0.928674 ! Inverting map ! Added new window around map position (-22.6, 25.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00651932 Jy ! Component: 100 - total flux cleaned = 0.00763181 Jy ! Component: 150 - total flux cleaned = 0.00900194 Jy ! Component: 200 - total flux cleaned = 0.0104381 Jy ! Total flux subtracted in 200 components = 0.0104381 Jy ! Clean residual min=-0.004695 max=0.004563 Jy/beam ! Clean residual mean=0.000087 rms=0.001536 Jy/beam ! Combined flux in latest and established models = 0.108275 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 108 components and 0.108275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072766Jy sigma=0.911206 ! Fit after self-cal, rms=0.072412Jy sigma=0.908054 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.473 mas, bmaj=6.844 mas, bpa=1.467 degrees ! Estimated noise=4.12833 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0759055 Jy ! Component: 100 - total flux cleaned = 0.0946621 Jy ! Component: 150 - total flux cleaned = 0.101026 Jy ! Component: 200 - total flux cleaned = 0.105878 Jy ! Total flux subtracted in 200 components = 0.105878 Jy ! Clean residual min=-0.012476 max=0.009882 Jy/beam ! Clean residual mean=-0.000014 rms=0.002925 Jy/beam ! Combined flux in latest and established models = 0.105878 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.105878 Jy ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=7.494 mas, bpa=-1.083 degrees ! Estimated noise=2.73467 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00703065 Jy ! Component: 100 - total flux cleaned = 0.0113577 Jy ! Component: 150 - total flux cleaned = 0.0126389 Jy ! Component: 200 - total flux cleaned = 0.0129439 Jy ! Total flux subtracted in 200 components = 0.0129439 Jy ! Clean residual min=-0.005025 max=0.004923 Jy/beam ! Clean residual mean=0.000080 rms=0.001702 Jy/beam ! Combined flux in latest and established models = 0.118822 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 62 components and 0.118822 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.316 mas, bmaj=8.086 mas, bpa=0.6055 degrees ! Estimated noise=2.77605 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000729374 Jy ! Component: 100 - total flux cleaned = -0.000948396 Jy ! Component: 150 - total flux cleaned = -0.00133943 Jy ! Component: 200 - total flux cleaned = -0.00134212 Jy ! Total flux subtracted in 200 components = -0.00134212 Jy ! Clean residual min=-0.004859 max=0.004305 Jy/beam ! Clean residual mean=0.000069 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.117479 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 90 components and 0.117479 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=7.494 mas, bpa=-1.083 degrees ! Estimated noise=2.73467 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000597841 Jy ! Component: 100 - total flux cleaned = -0.000197436 Jy ! Component: 150 - total flux cleaned = -1.4122e-05 Jy ! Component: 200 - total flux cleaned = 0.000158512 Jy ! Total flux subtracted in 200 components = 0.000158512 Jy ! Clean residual min=-0.004673 max=0.004484 Jy/beam ! Clean residual mean=0.000061 rms=0.001451 Jy/beam ! Combined flux in latest and established models = 0.117638 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 115 components and 0.117638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072066Jy sigma=0.903092 ! Fit after self-cal, rms=0.071827Jy sigma=0.900918 wmodel J0411-2756_X_2005_06_01_yyk\_map.mod ! Writing 115 model components to file: J0411-2756_X_2005_06_01_yyk_map.mod wobs J0411-2756_X_2005_06_01_yyk\_uvs.fits ! Writing UV FITS file: J0411-2756_X_2005_06_01_yyk_uvs.fits wwins J0411-2756_X_2005_06_01_yyk\_map.win ! wwins: Wrote 2 windows to J0411-2756_X_2005_06_01_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101993 Jy ! Component: 100 - total flux cleaned = 0.000884495 Jy ! Component: 150 - total flux cleaned = 0.00056281 Jy ! Component: 200 - total flux cleaned = 0.000624477 Jy ! Component: 250 - total flux cleaned = 0.000846096 Jy ! Component: 300 - total flux cleaned = 0.00116448 Jy ! Component: 350 - total flux cleaned = 0.00146307 Jy ! Component: 400 - total flux cleaned = 0.00198644 Jy ! Component: 450 - total flux cleaned = 0.00239546 Jy ! Component: 500 - total flux cleaned = 0.00292272 Jy ! Component: 550 - total flux cleaned = 0.00368858 Jy ! Component: 600 - total flux cleaned = 0.00446968 Jy ! Component: 650 - total flux cleaned = 0.00522589 Jy ! Component: 700 - total flux cleaned = 0.00580701 Jy ! Component: 750 - total flux cleaned = 0.00637359 Jy ! Component: 800 - total flux cleaned = 0.00677918 Jy ! Component: 850 - total flux cleaned = 0.00710327 Jy ! Component: 900 - total flux cleaned = 0.00742014 Jy ! Component: 950 - total flux cleaned = 0.00762654 Jy ! Component: 1000 - total flux cleaned = 0.00782973 Jy ! Component: 1050 - total flux cleaned = 0.00799608 Jy ! Component: 1100 - total flux cleaned = 0.00815985 Jy ! Component: 1150 - total flux cleaned = 0.00828823 Jy ! Component: 1200 - total flux cleaned = 0.00844716 Jy ! Component: 1250 - total flux cleaned = 0.00860365 Jy ! Component: 1300 - total flux cleaned = 0.00878944 Jy ! Component: 1350 - total flux cleaned = 0.00888091 Jy ! Component: 1400 - total flux cleaned = 0.00894163 Jy ! Component: 1450 - total flux cleaned = 0.00903168 Jy ! Component: 1500 - total flux cleaned = 0.00909129 Jy ! Component: 1550 - total flux cleaned = 0.00912086 Jy ! Component: 1600 - total flux cleaned = 0.0091797 Jy ! Component: 1650 - total flux cleaned = 0.00926736 Jy ! Component: 1700 - total flux cleaned = 0.00929607 Jy ! Component: 1750 - total flux cleaned = 0.00935391 Jy ! Component: 1800 - total flux cleaned = 0.00944004 Jy ! Component: 1850 - total flux cleaned = 0.00946871 Jy ! Component: 1900 - total flux cleaned = 0.00946862 Jy ! Component: 1950 - total flux cleaned = 0.00949712 Jy ! Component: 2000 - total flux cleaned = 0.0095253 Jy ! Total flux subtracted in 2048 components = 0.00958177 Jy ! Clean residual min=-0.001590 max=0.001704 Jy/beam ! Clean residual mean=0.000049 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.12722 Jy keep ! Adding 138 model components to the UV plane model. ! The established model now contains 252 components and 0.12722 Jy ![Exited script file: muppet] wmap "J0411-2756_X_2005_06_01_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.934 x 7.494 at -1.083 degrees (North through East) ! Clean map min=-0.0043045 max=0.086659 Jy/beam ! Writing clean map to FITS file: J0411-2756_X_2005_06_01_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0866594 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000621543 device "J0411-2756_X_2005_06_01_yyk\_map.eps/VPS" ! Attempting to open device: 'J0411-2756_X_2005_06_01_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.15168 2.15168 4.30335 8.6067 17.2134 34.4268 68.8536 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.086 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.934 x 7.494 at -1.083 degrees (North through East) ! Clean map min=-0.0043045 max=0.086659 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0411-2756_X_2005_06_01_yyk\_map.gif/gif" ! Attempting to open device: 'J0411-2756_X_2005_06_01_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0411-2756_X_2005_06_01_yyk_uvs.log closed on Sat Oct 8 16:55:38 2005