! Started logfile: J0408-0529_X_2005_05_12_yyk_uvs.log on Sat Oct 8 16:55:26 2005 obs J0408-0529_X_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J0408-0529_X_2005_05_12_yyk_uve.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.963333 visibilities/baseline/integration-bin. ! Found source: J0408-0529 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1439 lines of history. ! ! Reading 3468 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0408-0529_X_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.153788 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7359 mas, bmaj=1.764 mas, bpa=-2.142 degrees ! Estimated noise=1.06033 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.114877 Jy ! Component: 100 - total flux cleaned = 0.134507 Jy ! Total flux subtracted in 100 components = 0.134507 Jy ! Clean residual min=-0.005105 max=0.005793 Jy/beam ! Clean residual mean=-0.000017 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.134507 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.134507 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.074357Jy sigma=1.106784 ! Fit after self-cal, rms=0.074282Jy sigma=1.104215 ! Inverting map and beam ! Estimated beam: bmin=0.7359 mas, bmaj=1.764 mas, bpa=-2.142 degrees ! Estimated noise=1.06033 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9346 mas, bmaj=2.163 mas, bpa=-2.046 degrees ! Estimated noise=0.669699 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00867416 Jy ! Component: 100 - total flux cleaned = 0.011667 Jy ! Component: 150 - total flux cleaned = 0.0123019 Jy ! Component: 200 - total flux cleaned = 0.0125241 Jy ! Total flux subtracted in 200 components = 0.0125241 Jy ! Clean residual min=-0.003620 max=0.004460 Jy/beam ! Clean residual mean=-0.000040 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.147031 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 23 components and 0.147031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073679Jy sigma=1.088894 ! Fit after self-cal, rms=0.073672Jy sigma=1.088604 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9346 x 2.163 at -2.046 degrees (North through East) ! Clean map min=-0.0034488 max=0.13435 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00136 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 0.96 KP 0.96 ! LA 1.14 MK 1.02 NL 0.97 OV 1.00 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00811 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.00 KP 0.89 ! LA 1.17 MK 0.96 NL 0.97 OV 0.93 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.994563 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.06 HN 0.86 KP 0.87 ! LA 1.19 MK 1.05 NL 1.00 OV 1.02 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.969414 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.96 KP 1.02 ! LA 1.15 MK 1.09 NL 1.00 OV 1.04 ! PT 1.06 SC 0.96 ! ! ! Fit before self-cal, rms=0.073672Jy sigma=1.088604 ! Fit after self-cal, rms=0.070993Jy sigma=1.066112 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070993Jy sigma=1.066112 ! Fit after self-cal, rms=0.070984Jy sigma=1.065899 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9353 mas, bmaj=2.171 mas, bpa=-2.018 degrees ! Estimated noise=0.65949 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000615149 Jy ! Component: 100 - total flux cleaned = -0.000672286 Jy ! Component: 150 - total flux cleaned = -0.000613466 Jy ! Component: 200 - total flux cleaned = -0.000563293 Jy ! Total flux subtracted in 200 components = -0.000563293 Jy ! Clean residual min=-0.002523 max=0.002646 Jy/beam ! Clean residual mean=-0.000002 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.146467 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.146467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070940Jy sigma=1.065400 ! Fit after self-cal, rms=0.070937Jy sigma=1.065202 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070937Jy sigma=1.065202 ! Fit after self-cal, rms=0.069250Jy sigma=1.021623 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000887543 Jy ! Component: 100 - total flux cleaned = 0.00104773 Jy ! Component: 150 - total flux cleaned = 0.00104876 Jy ! Component: 200 - total flux cleaned = 0.00104951 Jy ! Total flux subtracted in 200 components = 0.00104951 Jy ! Clean residual min=-0.002563 max=0.002594 Jy/beam ! Clean residual mean=-0.000005 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.147517 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.147517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069237Jy sigma=1.021420 ! Fit after self-cal, rms=0.069307Jy sigma=1.017695 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9353 x 2.171 at -2.018 degrees (North through East) ! Clean map min=-0.0025518 max=0.1332 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069307Jy sigma=1.017695 ! Fit after self-cal, rms=0.069859Jy sigma=1.010415 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069859Jy sigma=1.010415 ! Fit after self-cal, rms=0.069944Jy sigma=1.009909 ! Inverting map and beam ! Estimated beam: bmin=0.9309 mas, bmaj=2.171 mas, bpa=-2.203 degrees ! Estimated noise=0.658633 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000338551 Jy ! Component: 100 - total flux cleaned = 0.000361069 Jy ! Component: 150 - total flux cleaned = 0.000394719 Jy ! Component: 200 - total flux cleaned = 0.00040253 Jy ! Total flux subtracted in 200 components = 0.00040253 Jy ! Clean residual min=-0.002184 max=0.002516 Jy/beam ! Clean residual mean=-0.000005 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.147919 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.147919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069938Jy sigma=1.009835 ! Fit after self-cal, rms=0.069980Jy sigma=1.009755 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069980Jy sigma=1.009755 ! Fit after self-cal, rms=0.070418Jy sigma=0.997215 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070418Jy sigma=0.997215 ! Fit after self-cal, rms=0.070452Jy sigma=0.997098 ! Inverting map and beam ! Estimated beam: bmin=0.9269 mas, bmaj=2.166 mas, bpa=-2.067 degrees ! Estimated noise=0.65964 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000644445 Jy ! Component: 100 - total flux cleaned = 0.000705575 Jy ! Component: 150 - total flux cleaned = 0.000731357 Jy ! Component: 200 - total flux cleaned = 0.000731084 Jy ! Total flux subtracted in 200 components = 0.000731084 Jy ! Clean residual min=-0.002268 max=0.002516 Jy/beam ! Clean residual mean=-0.000008 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.148651 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.148651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070443Jy sigma=0.996973 ! Fit after self-cal, rms=0.070460Jy sigma=0.996958 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.225 mas, bmaj=3.734 mas, bpa=4.016 degrees ! Estimated noise=0.832979 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -1.08746e-05 Jy ! Component: 100 - total flux cleaned = 2.82221e-05 Jy ! Component: 150 - total flux cleaned = 4.61942e-05 Jy ! Component: 200 - total flux cleaned = 6.42071e-05 Jy ! Total flux subtracted in 200 components = 6.42071e-05 Jy ! Clean residual min=-0.002694 max=0.003036 Jy/beam ! Clean residual mean=-0.000013 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.148715 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 49 components and 0.148715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070471Jy sigma=0.997012 ! Fit after self-cal, rms=0.070480Jy sigma=0.996985 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7353 mas, bmaj=1.771 mas, bpa=-2 degrees ! Estimated noise=1.04517 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.114158 Jy ! Component: 100 - total flux cleaned = 0.13316 Jy ! Component: 150 - total flux cleaned = 0.140654 Jy ! Component: 200 - total flux cleaned = 0.144438 Jy ! Total flux subtracted in 200 components = 0.144438 Jy ! Clean residual min=-0.003684 max=0.004150 Jy/beam ! Clean residual mean=-0.000008 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.144438 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.144438 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9269 mas, bmaj=2.166 mas, bpa=-2.067 degrees ! Estimated noise=0.65964 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286952 Jy ! Component: 100 - total flux cleaned = 0.00356781 Jy ! Component: 150 - total flux cleaned = 0.00376866 Jy ! Component: 200 - total flux cleaned = 0.00387067 Jy ! Total flux subtracted in 200 components = 0.00387067 Jy ! Clean residual min=-0.002218 max=0.002499 Jy/beam ! Clean residual mean=-0.000007 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.148309 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 35 components and 0.148309 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.225 mas, bmaj=3.734 mas, bpa=4.016 degrees ! Estimated noise=0.832979 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000233693 Jy ! Component: 100 - total flux cleaned = 0.000275816 Jy ! Component: 150 - total flux cleaned = 0.000295856 Jy ! Component: 200 - total flux cleaned = 0.000334487 Jy ! Total flux subtracted in 200 components = 0.000334487 Jy ! Clean residual min=-0.002691 max=0.003045 Jy/beam ! Clean residual mean=-0.000013 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.148644 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 40 components and 0.148644 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9269 mas, bmaj=2.166 mas, bpa=-2.067 degrees ! Estimated noise=0.65964 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.48357e-05 Jy ! Component: 100 - total flux cleaned = 8.03286e-05 Jy ! Component: 150 - total flux cleaned = 9.62079e-05 Jy ! Component: 200 - total flux cleaned = 8.40207e-05 Jy ! Total flux subtracted in 200 components = 8.40207e-05 Jy ! Clean residual min=-0.002247 max=0.002488 Jy/beam ! Clean residual mean=-0.000008 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.148728 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.148728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070470Jy sigma=0.996920 ! Fit after self-cal, rms=0.070473Jy sigma=0.996900 wmodel J0408-0529_X_2005_05_12_yyk\_map.mod ! Writing 44 model components to file: J0408-0529_X_2005_05_12_yyk_map.mod wobs J0408-0529_X_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J0408-0529_X_2005_05_12_yyk_uvs.fits wwins J0408-0529_X_2005_05_12_yyk\_map.win ! wwins: Wrote 1 windows to J0408-0529_X_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000683977 Jy ! Component: 100 - total flux cleaned = 0.000724595 Jy ! Component: 150 - total flux cleaned = 0.000764601 Jy ! Component: 200 - total flux cleaned = 0.000730089 Jy ! Component: 250 - total flux cleaned = 0.000592545 Jy ! Component: 300 - total flux cleaned = 0.000362429 Jy ! Component: 350 - total flux cleaned = 0.000265943 Jy ! Component: 400 - total flux cleaned = 4.77345e-05 Jy ! Component: 450 - total flux cleaned = -0.00010398 Jy ! Component: 500 - total flux cleaned = -0.000222045 Jy ! Component: 550 - total flux cleaned = -0.000222359 Jy ! Component: 600 - total flux cleaned = -0.000392377 Jy ! Component: 650 - total flux cleaned = -0.000447601 Jy ! Component: 700 - total flux cleaned = -0.000636032 Jy ! Component: 750 - total flux cleaned = -0.000714829 Jy ! Component: 800 - total flux cleaned = -0.000740802 Jy ! Component: 850 - total flux cleaned = -0.000766653 Jy ! Component: 900 - total flux cleaned = -0.000841474 Jy ! Component: 950 - total flux cleaned = -0.000866221 Jy ! Component: 1000 - total flux cleaned = -0.000914483 Jy ! Component: 1050 - total flux cleaned = -0.00091439 Jy ! Component: 1100 - total flux cleaned = -0.000820195 Jy ! Component: 1150 - total flux cleaned = -0.000842833 Jy ! Component: 1200 - total flux cleaned = -0.00077464 Jy ! Component: 1250 - total flux cleaned = -0.00075222 Jy ! Component: 1300 - total flux cleaned = -0.000685999 Jy ! Component: 1350 - total flux cleaned = -0.000664023 Jy ! Component: 1400 - total flux cleaned = -0.000620446 Jy ! Component: 1450 - total flux cleaned = -0.000599163 Jy ! Component: 1500 - total flux cleaned = -0.000619839 Jy ! Component: 1550 - total flux cleaned = -0.000515347 Jy ! Component: 1600 - total flux cleaned = -0.000494643 Jy ! Component: 1650 - total flux cleaned = -0.000494259 Jy ! Component: 1700 - total flux cleaned = -0.000454006 Jy ! Component: 1750 - total flux cleaned = -0.000473848 Jy ! Component: 1800 - total flux cleaned = -0.000414866 Jy ! Component: 1850 - total flux cleaned = -0.000434389 Jy ! Component: 1900 - total flux cleaned = -0.000415405 Jy ! Component: 1950 - total flux cleaned = -0.000472794 Jy ! Component: 2000 - total flux cleaned = -0.000416075 Jy ! Total flux subtracted in 2048 components = -0.000360097 Jy ! Clean residual min=-0.001267 max=0.001035 Jy/beam ! Clean residual mean=-0.000004 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.148368 Jy keep ! Adding 136 model components to the UV plane model. ! The established model now contains 180 components and 0.148367 Jy ![Exited script file: muppet] wmap "J0408-0529_X_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9269 x 2.166 at -2.067 degrees (North through East) ! Clean map min=-0.0020456 max=0.13369 Jy/beam ! Writing clean map to FITS file: J0408-0529_X_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.133693 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000361064 device "J0408-0529_X_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0408-0529_X_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.810209 0.810209 1.62042 3.24084 6.48167 12.9633 25.9267 51.8534 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.133 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9269 x 2.166 at -2.067 degrees (North through East) ! Clean map min=-0.0020456 max=0.13369 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0408-0529_X_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0408-0529_X_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0408-0529_X_2005_05_12_yyk_uvs.log closed on Sat Oct 8 16:55:30 2005