! Started logfile: J0354-1616_X_2005_05_12_yyk_uvs.log on Sat Oct 8 16:54:46 2005 obs J0354-1616_X_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J0354-1616_X_2005_05_12_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.775758 visibilities/baseline/integration-bin. ! Found source: J0354-1616 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1439 lines of history. ! ! Reading 1536 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0354-1616_X_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.132027 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7276 mas, bmaj=1.849 mas, bpa=-8.05 degrees ! Estimated noise=2.07592 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0714378 Jy ! Component: 100 - total flux cleaned = 0.0913954 Jy ! Total flux subtracted in 100 components = 0.0913954 Jy ! Clean residual min=-0.013484 max=0.015951 Jy/beam ! Clean residual mean=-0.000023 rms=0.003355 Jy/beam ! Combined flux in latest and established models = 0.0913954 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0913954 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.098351Jy sigma=1.411420 ! Fit after self-cal, rms=0.089351Jy sigma=1.286121 ! Inverting map and beam ! Estimated beam: bmin=0.7276 mas, bmaj=1.849 mas, bpa=-8.05 degrees ! Estimated noise=2.07592 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9674 mas, bmaj=2.967 mas, bpa=-13.01 degrees ! Estimated noise=1.21914 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0277254 Jy ! Component: 100 - total flux cleaned = 0.0361821 Jy ! Component: 150 - total flux cleaned = 0.0387517 Jy ! Component: 200 - total flux cleaned = 0.0391271 Jy ! Total flux subtracted in 200 components = 0.0391271 Jy ! Clean residual min=-0.008679 max=0.008101 Jy/beam ! Clean residual mean=-0.000014 rms=0.002495 Jy/beam ! Combined flux in latest and established models = 0.130523 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 31 components and 0.130522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086428Jy sigma=1.170221 ! Fit after self-cal, rms=0.086455Jy sigma=1.169881 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9674 x 2.967 at -13.01 degrees (North through East) ! Clean map min=-0.0083722 max=0.10298 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.988582 ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.02 HN 1.18 KP 0.86 ! LA 1.00* MK 0.92 NL 0.99 OV 0.98 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.086455Jy sigma=1.169881 ! Fit after self-cal, rms=0.086763Jy sigma=1.165309 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086763Jy sigma=1.165309 ! Fit after self-cal, rms=0.086762Jy sigma=1.165043 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9642 mas, bmaj=2.983 mas, bpa=-13.49 degrees ! Estimated noise=1.21063 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000389618 Jy ! Component: 100 - total flux cleaned = -0.00039269 Jy ! Component: 150 - total flux cleaned = -0.000330065 Jy ! Component: 200 - total flux cleaned = -0.000269227 Jy ! Total flux subtracted in 200 components = -0.000269227 Jy ! Clean residual min=-0.008107 max=0.007504 Jy/beam ! Clean residual mean=-0.000012 rms=0.002341 Jy/beam ! Combined flux in latest and established models = 0.130253 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.130253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086660Jy sigma=1.163403 ! Fit after self-cal, rms=0.086654Jy sigma=1.163137 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086654Jy sigma=1.163137 ! Fit after self-cal, rms=0.081960Jy sigma=1.083542 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226889 Jy ! Component: 100 - total flux cleaned = 0.00226569 Jy ! Component: 150 - total flux cleaned = 0.00226466 Jy ! Component: 200 - total flux cleaned = 0.00226281 Jy ! Total flux subtracted in 200 components = 0.00226281 Jy ! Clean residual min=-0.007215 max=0.007109 Jy/beam ! Clean residual mean=-0.000012 rms=0.002225 Jy/beam ! Combined flux in latest and established models = 0.132516 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.132516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082025Jy sigma=1.080807 ! Fit after self-cal, rms=0.081728Jy sigma=1.075024 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9642 x 2.983 at -13.49 degrees (North through East) ! Clean map min=-0.006887 max=0.10539 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081728Jy sigma=1.075024 ! Fit after self-cal, rms=0.081879Jy sigma=1.073437 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081879Jy sigma=1.073437 ! Fit after self-cal, rms=0.081882Jy sigma=1.072789 ! Inverting map and beam ! Estimated beam: bmin=0.9695 mas, bmaj=2.968 mas, bpa=-13.45 degrees ! Estimated noise=1.21745 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000941228 Jy ! Component: 100 - total flux cleaned = 0.000880441 Jy ! Component: 150 - total flux cleaned = 0.000936628 Jy ! Component: 200 - total flux cleaned = 0.000937275 Jy ! Total flux subtracted in 200 components = 0.000937275 Jy ! Clean residual min=-0.007238 max=0.007209 Jy/beam ! Clean residual mean=-0.000014 rms=0.002128 Jy/beam ! Combined flux in latest and established models = 0.133453 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.133453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081905Jy sigma=1.071312 ! Fit after self-cal, rms=0.081908Jy sigma=1.071146 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081908Jy sigma=1.071146 ! Fit after self-cal, rms=0.081915Jy sigma=1.071445 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081915Jy sigma=1.071445 ! Fit after self-cal, rms=0.081918Jy sigma=1.071432 ! Inverting map and beam ! Estimated beam: bmin=0.9693 mas, bmaj=2.96 mas, bpa=-13.44 degrees ! Estimated noise=1.21927 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253314 Jy ! Component: 100 - total flux cleaned = 0.000355797 Jy ! Component: 150 - total flux cleaned = 0.000397624 Jy ! Component: 200 - total flux cleaned = 0.000401194 Jy ! Total flux subtracted in 200 components = 0.000401194 Jy ! Clean residual min=-0.007167 max=0.007137 Jy/beam ! Clean residual mean=-0.000013 rms=0.002137 Jy/beam ! Combined flux in latest and established models = 0.133855 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.133855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081909Jy sigma=1.070435 ! Fit after self-cal, rms=0.081903Jy sigma=1.070359 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.33 mas, bmaj=5.066 mas, bpa=-2.674 degrees ! Estimated noise=1.47355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140747 Jy ! Component: 100 - total flux cleaned = 0.00131326 Jy ! Component: 150 - total flux cleaned = 0.00130643 Jy ! Component: 200 - total flux cleaned = 0.0013069 Jy ! Total flux subtracted in 200 components = 0.0013069 Jy ! Clean residual min=-0.007689 max=0.008857 Jy/beam ! Clean residual mean=-0.000019 rms=0.002518 Jy/beam ! Combined flux in latest and established models = 0.135161 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.135161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082164Jy sigma=1.071394 ! Fit after self-cal, rms=0.082120Jy sigma=1.070707 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7273 mas, bmaj=1.843 mas, bpa=-8.19 degrees ! Estimated noise=2.08249 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0841103 Jy ! Component: 100 - total flux cleaned = 0.108243 Jy ! Component: 150 - total flux cleaned = 0.119436 Jy ! Component: 200 - total flux cleaned = 0.122412 Jy ! Total flux subtracted in 200 components = 0.122412 Jy ! Clean residual min=-0.010334 max=0.010773 Jy/beam ! Clean residual mean=-0.000010 rms=0.002463 Jy/beam ! Combined flux in latest and established models = 0.122412 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.122412 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9693 mas, bmaj=2.96 mas, bpa=-13.44 degrees ! Estimated noise=1.21927 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 1.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109353 Jy ! Component: 100 - total flux cleaned = 0.0124739 Jy ! Component: 150 - total flux cleaned = 0.0126542 Jy ! Component: 200 - total flux cleaned = 0.0126589 Jy ! Total flux subtracted in 200 components = 0.0126589 Jy ! Clean residual min=-0.006580 max=0.007032 Jy/beam ! Clean residual mean=-0.000011 rms=0.001945 Jy/beam ! Combined flux in latest and established models = 0.135071 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 59 components and 0.135071 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.33 mas, bmaj=5.066 mas, bpa=-2.674 degrees ! Estimated noise=1.47355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152907 Jy ! Component: 100 - total flux cleaned = 0.00163502 Jy ! Component: 150 - total flux cleaned = 0.00172182 Jy ! Component: 200 - total flux cleaned = 0.00172504 Jy ! Total flux subtracted in 200 components = 0.00172504 Jy ! Clean residual min=-0.006697 max=0.007733 Jy/beam ! Clean residual mean=-0.000014 rms=0.002269 Jy/beam ! Combined flux in latest and established models = 0.136796 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 74 components and 0.136796 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9693 mas, bmaj=2.96 mas, bpa=-13.44 degrees ! Estimated noise=1.21927 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000972728 Jy ! Component: 100 - total flux cleaned = -0.00153544 Jy ! Component: 150 - total flux cleaned = -0.00178034 Jy ! Component: 200 - total flux cleaned = -0.0019266 Jy ! Total flux subtracted in 200 components = -0.0019266 Jy ! Clean residual min=-0.005964 max=0.006449 Jy/beam ! Clean residual mean=-0.000009 rms=0.001796 Jy/beam ! Combined flux in latest and established models = 0.134869 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 90 components and 0.134869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081478Jy sigma=1.051224 ! Fit after self-cal, rms=0.081292Jy sigma=1.048513 wmodel J0354-1616_X_2005_05_12_yyk\_map.mod ! Writing 90 model components to file: J0354-1616_X_2005_05_12_yyk_map.mod wobs J0354-1616_X_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J0354-1616_X_2005_05_12_yyk_uvs.fits wwins J0354-1616_X_2005_05_12_yyk\_map.win ! wwins: Wrote 2 windows to J0354-1616_X_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000497905 Jy ! Component: 100 - total flux cleaned = 0.000795581 Jy ! Component: 150 - total flux cleaned = 0.00127166 Jy ! Component: 200 - total flux cleaned = 0.00216576 Jy ! Component: 250 - total flux cleaned = 0.0032721 Jy ! Component: 300 - total flux cleaned = 0.00433065 Jy ! Component: 350 - total flux cleaned = 0.005424 Jy ! Component: 400 - total flux cleaned = 0.0065537 Jy ! Component: 450 - total flux cleaned = 0.00749767 Jy ! Component: 500 - total flux cleaned = 0.00827117 Jy ! Component: 550 - total flux cleaned = 0.00895409 Jy ! Component: 600 - total flux cleaned = 0.00968355 Jy ! Component: 650 - total flux cleaned = 0.0103294 Jy ! Component: 700 - total flux cleaned = 0.0108329 Jy ! Component: 750 - total flux cleaned = 0.011141 Jy ! Component: 800 - total flux cleaned = 0.0117989 Jy ! Component: 850 - total flux cleaned = 0.0121485 Jy ! Component: 900 - total flux cleaned = 0.012492 Jy ! Component: 950 - total flux cleaned = 0.0129971 Jy ! Component: 1000 - total flux cleaned = 0.0135467 Jy ! Component: 1050 - total flux cleaned = 0.0139768 Jy ! Component: 1100 - total flux cleaned = 0.0143989 Jy ! Component: 1150 - total flux cleaned = 0.0147105 Jy ! Component: 1200 - total flux cleaned = 0.0150667 Jy ! Component: 1250 - total flux cleaned = 0.0153666 Jy ! Component: 1300 - total flux cleaned = 0.0156617 Jy ! Component: 1350 - total flux cleaned = 0.0157108 Jy ! Component: 1400 - total flux cleaned = 0.0160437 Jy ! Component: 1450 - total flux cleaned = 0.0160423 Jy ! Component: 1500 - total flux cleaned = 0.016135 Jy ! Component: 1550 - total flux cleaned = 0.0160901 Jy ! Component: 1600 - total flux cleaned = 0.0161788 Jy ! Component: 1650 - total flux cleaned = 0.0161783 Jy ! Component: 1700 - total flux cleaned = 0.0160907 Jy ! Component: 1750 - total flux cleaned = 0.0161335 Jy ! Component: 1800 - total flux cleaned = 0.0160911 Jy ! Component: 1850 - total flux cleaned = 0.0159659 Jy ! Component: 1900 - total flux cleaned = 0.0160478 Jy ! Component: 1950 - total flux cleaned = 0.0158436 Jy ! Component: 2000 - total flux cleaned = 0.0157636 Jy ! Total flux subtracted in 2048 components = 0.0158032 Jy ! Clean residual min=-0.002525 max=0.002200 Jy/beam ! Clean residual mean=-0.000002 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.150672 Jy keep ! Adding 138 model components to the UV plane model. ! The established model now contains 228 components and 0.150672 Jy ![Exited script file: muppet] wmap "J0354-1616_X_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9693 x 2.96 at -13.44 degrees (North through East) ! Clean map min=-0.005463 max=0.10694 Jy/beam ! Writing clean map to FITS file: J0354-1616_X_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.106945 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000781668 device "J0354-1616_X_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0354-1616_X_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.19272 2.19272 4.38544 8.77089 17.5418 35.0835 70.1671 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.106 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9693 x 2.96 at -13.44 degrees (North through East) ! Clean map min=-0.005463 max=0.10694 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0354-1616_X_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0354-1616_X_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0354-1616_X_2005_05_12_yyk_uvs.log closed on Sat Oct 8 16:54:50 2005