! Started logfile: J0339-0146_S_2005_06_01_yyk_uvs.log on Sat Oct 8 16:54:11 2005 obs J0339-0146_S_2005_06_01_yyk_uve.fits ! Reading UV FITS file: J0339-0146_S_2005_06_01_yyk_uve.fits ! AN table 1: 6 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.777778 visibilities/baseline/integration-bin. ! Found source: J0339-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1802 lines of history. ! ! Reading 840 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0339-0146_S_2005_06_01_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.96022 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.639 mas, bmaj=6.824 mas, bpa=-2.983 degrees ! Estimated noise=1.71765 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.56709 Jy ! Component: 100 - total flux cleaned = 1.94374 Jy ! Total flux subtracted in 100 components = 1.94374 Jy ! Clean residual min=-0.063860 max=0.114243 Jy/beam ! Clean residual mean=-0.000361 rms=0.021138 Jy/beam ! Combined flux in latest and established models = 1.94374 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.94374 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.382654Jy sigma=5.841290 ! Fit after self-cal, rms=0.381978Jy sigma=5.834375 ! Inverting map and beam ! Estimated beam: bmin=2.639 mas, bmaj=6.824 mas, bpa=-2.983 degrees ! Estimated noise=1.71765 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=7.95 mas, bpa=-4.026 degrees ! Estimated noise=1.34089 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.150179 Jy ! Component: 100 - total flux cleaned = 0.199003 Jy ! Component: 150 - total flux cleaned = 0.215739 Jy ! Component: 200 - total flux cleaned = 0.220289 Jy ! Total flux subtracted in 200 components = 0.220289 Jy ! Clean residual min=-0.056506 max=0.064762 Jy/beam ! Clean residual mean=-0.000741 rms=0.015198 Jy/beam ! Combined flux in latest and established models = 2.16402 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 30 components and 2.16402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318083Jy sigma=4.979847 ! Fit after self-cal, rms=0.317690Jy sigma=4.976923 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.064 x 7.95 at -4.026 degrees (North through East) ! Clean map min=-0.054574 max=1.8063 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.04811 ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.97 HN 0.97 KP 0.93 ! LA 1.15 MK 0.89 NL 0.91 OV 0.94 ! PT 1.04 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.988715 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.07 HN 1.02 KP 0.97 ! LA 1.13 MK 0.98 NL 0.95 OV 0.99 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.964176 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.24 HN 1.02 KP 0.96 ! LA 0.92 MK 1.10 NL 1.02 OV 0.98 ! PT 1.07 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.0393 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.07 HN 0.91 KP 0.88 ! LA 0.74 MK 1.11 NL 0.94 OV 0.84 ! PT 0.97 SC 1.13 ! ! ! Fit before self-cal, rms=0.317690Jy sigma=4.976923 ! Fit after self-cal, rms=0.172625Jy sigma=2.779112 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172625Jy sigma=2.779112 ! Fit after self-cal, rms=0.172619Jy sigma=2.779051 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=7.962 mas, bpa=-3.854 degrees ! Estimated noise=1.35195 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250355 Jy ! Component: 100 - total flux cleaned = 0.0331444 Jy ! Component: 150 - total flux cleaned = 0.0339729 Jy ! Component: 200 - total flux cleaned = 0.0341491 Jy ! Total flux subtracted in 200 components = 0.0341491 Jy ! Clean residual min=-0.012607 max=0.014054 Jy/beam ! Clean residual mean=0.000029 rms=0.003286 Jy/beam ! Combined flux in latest and established models = 2.19817 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 2.19817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168861Jy sigma=2.729582 ! Fit after self-cal, rms=0.168807Jy sigma=2.728432 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168807Jy sigma=2.728432 ! Fit after self-cal, rms=0.162912Jy sigma=2.700864 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152576 Jy ! Component: 100 - total flux cleaned = 0.00153012 Jy ! Component: 150 - total flux cleaned = 0.00140922 Jy ! Component: 200 - total flux cleaned = 0.00140379 Jy ! Total flux subtracted in 200 components = 0.00140379 Jy ! Clean residual min=-0.012666 max=0.014256 Jy/beam ! Clean residual mean=0.000026 rms=0.003246 Jy/beam ! Combined flux in latest and established models = 2.19958 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 60 components and 2.19958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162611Jy sigma=2.697542 ! Fit after self-cal, rms=0.159617Jy sigma=2.692077 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.101 x 7.962 at -3.854 degrees (North through East) ! Clean map min=-0.012226 max=1.8329 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159617Jy sigma=2.692077 ! Fit after self-cal, rms=0.088242Jy sigma=1.185347 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088242Jy sigma=1.185347 ! Fit after self-cal, rms=0.085125Jy sigma=1.180036 ! Inverting map and beam ! Estimated beam: bmin=3.106 mas, bmaj=7.97 mas, bpa=-3.871 degrees ! Estimated noise=1.34902 mJy/beam. ! Added new window around map position (-12, 42.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105444 Jy ! Component: 100 - total flux cleaned = 0.0105235 Jy ! Component: 150 - total flux cleaned = 0.0102799 Jy ! Component: 200 - total flux cleaned = 0.0100691 Jy ! Total flux subtracted in 200 components = 0.0100691 Jy ! Clean residual min=-0.011113 max=0.007587 Jy/beam ! Clean residual mean=-0.000044 rms=0.001937 Jy/beam ! Combined flux in latest and established models = 2.20965 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 82 components and 2.20965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083304Jy sigma=1.129799 ! Fit after self-cal, rms=0.081213Jy sigma=1.125617 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081213Jy sigma=1.125617 ! Fit after self-cal, rms=0.071905Jy sigma=0.985884 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071905Jy sigma=0.985884 ! Fit after self-cal, rms=0.070638Jy sigma=0.983758 ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=7.959 mas, bpa=-3.958 degrees ! Estimated noise=1.34628 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153309 Jy ! Component: 100 - total flux cleaned = 0.00170656 Jy ! Component: 150 - total flux cleaned = 0.00170698 Jy ! Component: 200 - total flux cleaned = 0.00156652 Jy ! Total flux subtracted in 200 components = 0.00156652 Jy ! Clean residual min=-0.009418 max=0.006813 Jy/beam ! Clean residual mean=-0.000040 rms=0.001721 Jy/beam ! Combined flux in latest and established models = 2.21121 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 99 components and 2.21121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070037Jy sigma=0.970615 ! Fit after self-cal, rms=0.069186Jy sigma=0.969098 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.941 mas, bmaj=13.67 mas, bpa=-4.907 degrees ! Estimated noise=1.74545 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.19951e-05 Jy ! Component: 100 - total flux cleaned = -0.000105901 Jy ! Component: 150 - total flux cleaned = -0.000315312 Jy ! Component: 200 - total flux cleaned = -0.00040967 Jy ! Total flux subtracted in 200 components = -0.00040967 Jy ! Clean residual min=-0.008007 max=0.005434 Jy/beam ! Clean residual mean=-0.000074 rms=0.001785 Jy/beam ! Combined flux in latest and established models = 2.2108 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 110 components and 2.2108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069537Jy sigma=0.971737 ! Fit after self-cal, rms=0.068737Jy sigma=0.967699 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.658 mas, bmaj=6.857 mas, bpa=-3.045 degrees ! Estimated noise=1.70479 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.55318 Jy ! Component: 100 - total flux cleaned = 1.92013 Jy ! Component: 150 - total flux cleaned = 2.0684 Jy ! Component: 200 - total flux cleaned = 2.13229 Jy ! Total flux subtracted in 200 components = 2.13229 Jy ! Clean residual min=-0.014459 max=0.028371 Jy/beam ! Clean residual mean=0.000005 rms=0.004528 Jy/beam ! Combined flux in latest and established models = 2.13229 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 2.13229 Jy ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=7.959 mas, bpa=-3.958 degrees ! Estimated noise=1.34628 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 1.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0433103 Jy ! Component: 100 - total flux cleaned = 0.0610715 Jy ! Component: 150 - total flux cleaned = 0.0655198 Jy ! Component: 200 - total flux cleaned = 0.0683809 Jy ! Total flux subtracted in 200 components = 0.0683809 Jy ! Clean residual min=-0.008465 max=0.005962 Jy/beam ! Clean residual mean=-0.000008 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 2.20067 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 51 components and 2.20067 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.941 mas, bmaj=13.67 mas, bpa=-4.907 degrees ! Estimated noise=1.74545 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00587311 Jy ! Component: 100 - total flux cleaned = 0.00794235 Jy ! Component: 150 - total flux cleaned = 0.00840135 Jy ! Component: 200 - total flux cleaned = 0.00848348 Jy ! Total flux subtracted in 200 components = 0.00848348 Jy ! Clean residual min=-0.005478 max=0.005231 Jy/beam ! Clean residual mean=-0.000055 rms=0.001476 Jy/beam ! Combined flux in latest and established models = 2.20916 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 81 components and 2.20916 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=7.959 mas, bpa=-3.958 degrees ! Estimated noise=1.34628 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00268375 Jy ! Component: 100 - total flux cleaned = -0.00164739 Jy ! Component: 150 - total flux cleaned = -0.0011023 Jy ! Component: 200 - total flux cleaned = -0.000619944 Jy ! Total flux subtracted in 200 components = -0.000619944 Jy ! Clean residual min=-0.006482 max=0.005053 Jy/beam ! Clean residual mean=-0.000024 rms=0.001378 Jy/beam ! Combined flux in latest and established models = 2.20854 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 104 components and 2.20854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068113Jy sigma=0.948760 ! Fit after self-cal, rms=0.067691Jy sigma=0.946072 wmodel J0339-0146_S_2005_06_01_yyk\_map.mod ! Writing 104 model components to file: J0339-0146_S_2005_06_01_yyk_map.mod wobs J0339-0146_S_2005_06_01_yyk\_uvs.fits ! Writing UV FITS file: J0339-0146_S_2005_06_01_yyk_uvs.fits wwins J0339-0146_S_2005_06_01_yyk\_map.win ! wwins: Wrote 3 windows to J0339-0146_S_2005_06_01_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00294827 Jy ! Component: 100 - total flux cleaned = -0.00408032 Jy ! Component: 150 - total flux cleaned = -0.00432232 Jy ! Component: 200 - total flux cleaned = -0.00453658 Jy ! Component: 250 - total flux cleaned = -0.00473721 Jy ! Component: 300 - total flux cleaned = -0.00480193 Jy ! Component: 350 - total flux cleaned = -0.00504616 Jy ! Component: 400 - total flux cleaned = -0.00510368 Jy ! Component: 450 - total flux cleaned = -0.00516071 Jy ! Component: 500 - total flux cleaned = -0.0053765 Jy ! Component: 550 - total flux cleaned = -0.00547972 Jy ! Component: 600 - total flux cleaned = -0.00553035 Jy ! Component: 650 - total flux cleaned = -0.00557874 Jy ! Component: 700 - total flux cleaned = -0.00557876 Jy ! Component: 750 - total flux cleaned = -0.00562472 Jy ! Component: 800 - total flux cleaned = -0.00566899 Jy ! Component: 850 - total flux cleaned = -0.00553952 Jy ! Component: 900 - total flux cleaned = -0.00537138 Jy ! Component: 950 - total flux cleaned = -0.00528916 Jy ! Component: 1000 - total flux cleaned = -0.0052883 Jy ! Component: 1050 - total flux cleaned = -0.00516971 Jy ! Component: 1100 - total flux cleaned = -0.00513218 Jy ! Component: 1150 - total flux cleaned = -0.0053196 Jy ! Component: 1200 - total flux cleaned = -0.00528154 Jy ! Component: 1250 - total flux cleaned = -0.00513835 Jy ! Component: 1300 - total flux cleaned = -0.00517409 Jy ! Component: 1350 - total flux cleaned = -0.00496785 Jy ! Component: 1400 - total flux cleaned = -0.00500212 Jy ! Component: 1450 - total flux cleaned = -0.00476919 Jy ! Component: 1500 - total flux cleaned = -0.00470408 Jy ! Component: 1550 - total flux cleaned = -0.00451087 Jy ! Component: 1600 - total flux cleaned = -0.00435199 Jy ! Component: 1650 - total flux cleaned = -0.00419571 Jy ! Component: 1700 - total flux cleaned = -0.00401058 Jy ! Component: 1750 - total flux cleaned = -0.00382847 Jy ! Component: 1800 - total flux cleaned = -0.00373894 Jy ! Component: 1850 - total flux cleaned = -0.00356172 Jy ! Component: 1900 - total flux cleaned = -0.00344518 Jy ! Component: 1950 - total flux cleaned = -0.00327299 Jy ! Component: 2000 - total flux cleaned = -0.00310342 Jy ! Total flux subtracted in 2048 components = -0.00290855 Jy ! Clean residual min=-0.001540 max=0.001661 Jy/beam ! Clean residual mean=0.000010 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 2.20563 Jy keep ! Adding 121 model components to the UV plane model. ! The established model now contains 225 components and 2.20563 Jy ![Exited script file: muppet] wmap "J0339-0146_S_2005_06_01_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.098 x 7.959 at -3.958 degrees (North through East) ! Clean map min=-0.0051991 max=1.8316 Jy/beam ! Writing clean map to FITS file: J0339-0146_S_2005_06_01_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.83163 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000522839 device "J0339-0146_S_2005_06_01_yyk\_map.eps/VPS" ! Attempting to open device: 'J0339-0146_S_2005_06_01_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0856352 0.0856352 0.17127 0.342541 0.685082 1.37016 2.74033 5.48066 10.9613 21.9226 43.8452 87.6905 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.831 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.098 x 7.959 at -3.958 degrees (North through East) ! Clean map min=-0.0051991 max=1.8316 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0339-0146_S_2005_06_01_yyk\_map.gif/gif" ! Attempting to open device: 'J0339-0146_S_2005_06_01_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0339-0146_S_2005_06_01_yyk_uvs.log closed on Sat Oct 8 16:54:15 2005