! Started logfile: J0339-0146_S_2005_05_12_yyk_uvs.log on Sat Oct 8 16:54:07 2005 obs J0339-0146_S_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J0339-0146_S_2005_05_12_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0339-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1443 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0339-0146_S_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.97696 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.537 mas, bmaj=6.799 mas, bpa=-3.113 degrees ! Estimated noise=2.47693 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.58129 Jy ! Component: 100 - total flux cleaned = 1.97483 Jy ! Total flux subtracted in 100 components = 1.97483 Jy ! Clean residual min=-0.093766 max=0.119077 Jy/beam ! Clean residual mean=0.000370 rms=0.026825 Jy/beam ! Combined flux in latest and established models = 1.97483 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.97483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.378105Jy sigma=5.152757 ! Fit after self-cal, rms=0.377441Jy sigma=5.145884 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.21 mas, bmaj=7.784 mas, bpa=-6.354 degrees ! Estimated noise=1.95479 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.184272 Jy ! Component: 100 - total flux cleaned = 0.267188 Jy ! Component: 150 - total flux cleaned = 0.30856 Jy ! Component: 200 - total flux cleaned = 0.326516 Jy ! Total flux subtracted in 200 components = 0.326516 Jy ! Clean residual min=-0.076972 max=0.073065 Jy/beam ! Clean residual mean=-0.000910 rms=0.019420 Jy/beam ! Combined flux in latest and established models = 2.30135 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 46 components and 2.30135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.310776Jy sigma=4.285493 ! Fit after self-cal, rms=0.310567Jy sigma=4.281899 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.21 x 7.784 at -6.354 degrees (North through East) ! Clean map min=-0.076911 max=1.847 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02654 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.93 HN 1.02 KP 0.91 ! LA 1.21 MK 0.88 NL 0.92 OV 0.92 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01096 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 HN 1.05 KP 0.98 ! LA 1.19 MK 0.96 NL 0.94 OV 0.96 ! PT 0.98 SC 0.89 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.936987 ! Telescope amplitude corrections in sub-array 1: ! BR 1.31 FD 1.19 HN 1.07 KP 0.93 ! LA 1.06 MK 1.10 NL 1.00 OV 0.96 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01528 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.03 HN 0.96 KP 0.85 ! LA 1.24 MK 1.09 NL 0.93 OV 0.80 ! PT 0.91 SC 1.14 ! ! ! Fit before self-cal, rms=0.310567Jy sigma=4.281899 ! Fit after self-cal, rms=0.171954Jy sigma=2.414498 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171954Jy sigma=2.414498 ! Fit after self-cal, rms=0.171996Jy sigma=2.414263 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.243 mas, bmaj=7.889 mas, bpa=-5.903 degrees ! Estimated noise=1.92405 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0265993 Jy ! Component: 100 - total flux cleaned = -0.0300889 Jy ! Component: 150 - total flux cleaned = -0.0309978 Jy ! Component: 200 - total flux cleaned = -0.0309875 Jy ! Total flux subtracted in 200 components = -0.0309875 Jy ! Clean residual min=-0.025549 max=0.025836 Jy/beam ! Clean residual mean=-0.000049 rms=0.005659 Jy/beam ! Combined flux in latest and established models = 2.27036 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 58 components and 2.27036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170178Jy sigma=2.364561 ! Fit after self-cal, rms=0.170202Jy sigma=2.363756 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170202Jy sigma=2.363756 ! Fit after self-cal, rms=0.167178Jy sigma=2.330894 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (50, 23). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00915907 Jy ! Component: 100 - total flux cleaned = 0.0083925 Jy ! Component: 150 - total flux cleaned = 0.0100257 Jy ! Component: 200 - total flux cleaned = 0.0127964 Jy ! Total flux subtracted in 200 components = 0.0127964 Jy ! Clean residual min=-0.023207 max=0.021373 Jy/beam ! Clean residual mean=-0.000051 rms=0.004831 Jy/beam ! Combined flux in latest and established models = 2.28316 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 76 components and 2.28316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163797Jy sigma=2.266398 ! Fit after self-cal, rms=0.163096Jy sigma=2.258670 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.243 x 7.889 at -5.903 degrees (North through East) ! Clean map min=-0.023706 max=1.845 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163096Jy sigma=2.258670 ! Fit after self-cal, rms=0.105833Jy sigma=1.210077 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105833Jy sigma=1.210077 ! Fit after self-cal, rms=0.105793Jy sigma=1.209763 ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=7.93 mas, bpa=-6.094 degrees ! Estimated noise=1.92153 mJy/beam. ! Added new window around map position (4, 2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00930388 Jy ! Component: 100 - total flux cleaned = 0.00758775 Jy ! Component: 150 - total flux cleaned = 0.0071994 Jy ! Component: 200 - total flux cleaned = 0.00653489 Jy ! Total flux subtracted in 200 components = 0.00653489 Jy ! Clean residual min=-0.011025 max=0.010890 Jy/beam ! Clean residual mean=-0.000050 rms=0.002945 Jy/beam ! Combined flux in latest and established models = 2.28969 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 100 components and 2.28969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101677Jy sigma=1.157475 ! Fit after self-cal, rms=0.101577Jy sigma=1.155593 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101577Jy sigma=1.155593 ! Fit after self-cal, rms=0.086739Jy sigma=0.970197 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086739Jy sigma=0.970197 ! Fit after self-cal, rms=0.086733Jy sigma=0.970185 ! Inverting map and beam ! Estimated beam: bmin=3.236 mas, bmaj=7.93 mas, bpa=-6.151 degrees ! Estimated noise=1.91957 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204596 Jy ! Component: 100 - total flux cleaned = 0.000890914 Jy ! Component: 150 - total flux cleaned = 0.000653444 Jy ! Component: 200 - total flux cleaned = 0.000861447 Jy ! Total flux subtracted in 200 components = 0.000861447 Jy ! Clean residual min=-0.009229 max=0.008369 Jy/beam ! Clean residual mean=-0.000015 rms=0.002447 Jy/beam ! Combined flux in latest and established models = 2.29055 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 128 components and 2.29055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085131Jy sigma=0.947678 ! Fit after self-cal, rms=0.085101Jy sigma=0.946818 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.667 mas, bmaj=12.71 mas, bpa=-9.574 degrees ! Estimated noise=2.46863 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100983 Jy ! Component: 100 - total flux cleaned = 0.00142448 Jy ! Component: 150 - total flux cleaned = 0.00125582 Jy ! Component: 200 - total flux cleaned = 0.000812994 Jy ! Total flux subtracted in 200 components = 0.000812994 Jy ! Clean residual min=-0.011939 max=0.008022 Jy/beam ! Clean residual mean=-0.000035 rms=0.003099 Jy/beam ! Combined flux in latest and established models = 2.29137 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 143 components and 2.29137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084746Jy sigma=0.942799 ! Fit after self-cal, rms=0.084642Jy sigma=0.941018 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.558 mas, bmaj=6.848 mas, bpa=-3.212 degrees ! Estimated noise=2.41506 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.53827 Jy ! Component: 100 - total flux cleaned = 1.91554 Jy ! Component: 150 - total flux cleaned = 2.07235 Jy ! Component: 200 - total flux cleaned = 2.15128 Jy ! Total flux subtracted in 200 components = 2.15128 Jy ! Clean residual min=-0.017574 max=0.029137 Jy/beam ! Clean residual mean=0.000173 rms=0.006295 Jy/beam ! Combined flux in latest and established models = 2.15128 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 2.15128 Jy ! Inverting map and beam ! Estimated beam: bmin=3.236 mas, bmaj=7.93 mas, bpa=-6.151 degrees ! Estimated noise=1.91957 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0616537 Jy ! Component: 100 - total flux cleaned = 0.0915315 Jy ! Component: 150 - total flux cleaned = 0.108971 Jy ! Component: 200 - total flux cleaned = 0.120751 Jy ! Total flux subtracted in 200 components = 0.120751 Jy ! Clean residual min=-0.008316 max=0.009454 Jy/beam ! Clean residual mean=-0.000002 rms=0.002717 Jy/beam ! Combined flux in latest and established models = 2.27203 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 75 components and 2.27203 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.667 mas, bmaj=12.71 mas, bpa=-9.574 degrees ! Estimated noise=2.46863 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108859 Jy ! Component: 100 - total flux cleaned = 0.0135285 Jy ! Component: 150 - total flux cleaned = 0.0148838 Jy ! Component: 200 - total flux cleaned = 0.0161686 Jy ! Total flux subtracted in 200 components = 0.0161686 Jy ! Clean residual min=-0.010586 max=0.008003 Jy/beam ! Clean residual mean=-0.000034 rms=0.003098 Jy/beam ! Combined flux in latest and established models = 2.2882 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 116 components and 2.2882 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.236 mas, bmaj=7.93 mas, bpa=-6.151 degrees ! Estimated noise=1.91957 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000219284 Jy ! Component: 100 - total flux cleaned = 0.000928775 Jy ! Component: 150 - total flux cleaned = 0.00154055 Jy ! Component: 200 - total flux cleaned = 0.00208232 Jy ! Total flux subtracted in 200 components = 0.00208232 Jy ! Clean residual min=-0.007872 max=0.007670 Jy/beam ! Clean residual mean=-0.000038 rms=0.002276 Jy/beam ! Combined flux in latest and established models = 2.29028 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 139 components and 2.29028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084192Jy sigma=0.935811 ! Fit after self-cal, rms=0.084099Jy sigma=0.933100 wmodel J0339-0146_S_2005_05_12_yyk\_map.mod ! Writing 139 model components to file: J0339-0146_S_2005_05_12_yyk_map.mod wobs J0339-0146_S_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J0339-0146_S_2005_05_12_yyk_uvs.fits wwins J0339-0146_S_2005_05_12_yyk\_map.win ! wwins: Wrote 3 windows to J0339-0146_S_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116583 Jy ! Component: 100 - total flux cleaned = -0.0022612 Jy ! Component: 150 - total flux cleaned = -0.00260343 Jy ! Component: 200 - total flux cleaned = -0.00292673 Jy ! Component: 250 - total flux cleaned = -0.00312759 Jy ! Component: 300 - total flux cleaned = -0.00361701 Jy ! Component: 350 - total flux cleaned = -0.00408774 Jy ! Component: 400 - total flux cleaned = -0.00472202 Jy ! Component: 450 - total flux cleaned = -0.00515979 Jy ! Component: 500 - total flux cleaned = -0.00558174 Jy ! Component: 550 - total flux cleaned = -0.00607192 Jy ! Component: 600 - total flux cleaned = -0.00654523 Jy ! Component: 650 - total flux cleaned = -0.00677206 Jy ! Component: 700 - total flux cleaned = -0.00699234 Jy ! Component: 750 - total flux cleaned = -0.00749272 Jy ! Component: 800 - total flux cleaned = -0.00804823 Jy ! Component: 850 - total flux cleaned = -0.00879382 Jy ! Component: 900 - total flux cleaned = -0.00958823 Jy ! Component: 950 - total flux cleaned = -0.0105577 Jy ! Component: 1000 - total flux cleaned = -0.0111252 Jy ! Component: 1050 - total flux cleaned = -0.0118659 Jy ! Component: 1100 - total flux cleaned = -0.0125272 Jy ! Component: 1150 - total flux cleaned = -0.0131176 Jy ! Component: 1200 - total flux cleaned = -0.0138665 Jy ! Component: 1250 - total flux cleaned = -0.0141469 Jy ! Component: 1300 - total flux cleaned = -0.0144792 Jy ! Component: 1350 - total flux cleaned = -0.0149682 Jy ! Component: 1400 - total flux cleaned = -0.015235 Jy ! Component: 1450 - total flux cleaned = -0.0154955 Jy ! Component: 1500 - total flux cleaned = -0.0157529 Jy ! Component: 1550 - total flux cleaned = -0.0160551 Jy ! Component: 1600 - total flux cleaned = -0.0164012 Jy ! Component: 1650 - total flux cleaned = -0.0167391 Jy ! Component: 1700 - total flux cleaned = -0.0168341 Jy ! Component: 1750 - total flux cleaned = -0.0171634 Jy ! Component: 1800 - total flux cleaned = -0.0176695 Jy ! Component: 1850 - total flux cleaned = -0.0178507 Jy ! Component: 1900 - total flux cleaned = -0.0180296 Jy ! Component: 1950 - total flux cleaned = -0.0183364 Jy ! Component: 2000 - total flux cleaned = -0.0183375 Jy ! Total flux subtracted in 2048 components = -0.0185078 Jy ! Clean residual min=-0.002681 max=0.002389 Jy/beam ! Clean residual mean=-0.000019 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 2.27177 Jy keep ! Adding 149 model components to the UV plane model. ! The established model now contains 288 components and 2.27178 Jy ![Exited script file: muppet] wmap "J0339-0146_S_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.236 x 7.93 at -6.151 degrees (North through East) ! Clean map min=-0.0064267 max=1.8517 Jy/beam ! Writing clean map to FITS file: J0339-0146_S_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.85171 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000882062 device "J0339-0146_S_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0339-0146_S_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.142905 0.142905 0.285811 0.571621 1.14324 2.28648 4.57297 9.14594 18.2919 36.5838 73.1675 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.851 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.236 x 7.93 at -6.151 degrees (North through East) ! Clean map min=-0.0064267 max=1.8517 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0339-0146_S_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0339-0146_S_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0339-0146_S_2005_05_12_yyk_uvs.log closed on Sat Oct 8 16:54:11 2005