! Started logfile: J0334-4008_S_2005_06_01_yyk_uvs.log on Sat Oct  8 16:53:33 2005
obs J0334-4008_S_2005_06_01_yyk_uve.fits
! Reading UV FITS file: J0334-4008_S_2005_06_01_yyk_uve.fits
! AN table 1: 15 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.592593 visibilities/baseline/integration-bin.
! Found source: J0334-4008
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1802 lines of history.
! 
! Reading 1600 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0334-4008_S_2005_06_01_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.518186 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.139 mas, bmaj=6.457 mas, bpa=-3.231 degrees
! Estimated noise=2.25499 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.389653 Jy
! Component: 100  -  total flux cleaned = 0.483915 Jy
! Total flux subtracted in 100 components = 0.483915 Jy
! Clean residual min=-0.028329 max=0.037149 Jy/beam
! Clean residual mean=0.000430 rms=0.008501 Jy/beam
! Combined flux in latest and established models = 0.483915 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.483915 Jy
! 
! Correcting IF 1.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.153154Jy  sigma=1.750072
! Fit after  self-cal, rms=0.152893Jy  sigma=1.746283
! Inverting map and beam 
! Estimated beam: bmin=2.139 mas, bmaj=6.457 mas, bpa=-3.231 degrees
! Estimated noise=2.25499 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.919 mas, bmaj=8.292 mas, bpa=-5.166 degrees
! Estimated noise=1.32385 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0580137 Jy
! Component: 100  -  total flux cleaned = 0.0766771 Jy
! Component: 150  -  total flux cleaned = 0.0828235 Jy
! Component: 200  -  total flux cleaned = 0.0841503 Jy
! Total flux subtracted in 200 components = 0.0841503 Jy
! Clean residual min=-0.019837 max=0.020595 Jy/beam
! Clean residual mean=-0.000098 rms=0.006179 Jy/beam
! Combined flux in latest and established models = 0.568065 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 24 components and 0.568065 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138041Jy  sigma=1.523331
! Fit after  self-cal, rms=0.138023Jy  sigma=1.523079
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.919 x 8.292 at -5.166 degrees (North through East)
! Clean map  min=-0.019255  max=0.48422 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.00783
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.95     HN        1.00*    KP        0.91     
!   LA        1.12     MK        0.88     NL        1.20     OV        0.94     
!   PT        1.01     SC        0.91     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.97918
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.04     HN        1.00*    KP        0.95     
!   LA        1.08     MK        0.98     NL        1.24     OV        0.99     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.955185
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.23     HN        1.00*    KP        0.91     
!   LA        0.89     MK        1.07     NL        1.36     OV        0.95     
!   PT        1.06     SC        1.00     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.02167
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.05     HN        1.00*    KP        0.85     
!   LA        0.72     MK        1.07     NL        1.23     OV        0.83     
!   PT        0.93     SC        1.10     
! 
! 
! Fit before self-cal, rms=0.138023Jy  sigma=1.523079
! Fit after  self-cal, rms=0.107151Jy  sigma=1.121122
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107151Jy  sigma=1.121122
! Fit after  self-cal, rms=0.107161Jy  sigma=1.120745
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.961 mas, bmaj=8.266 mas, bpa=-4.761 degrees
! Estimated noise=1.28047 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0107379 Jy
! Component: 100  -  total flux cleaned = -0.0122864 Jy
! Component: 150  -  total flux cleaned = -0.0124703 Jy
! Component: 200  -  total flux cleaned = -0.0126215 Jy
! Total flux subtracted in 200 components = -0.0126215 Jy
! Clean residual min=-0.005014 max=0.009010 Jy/beam
! Clean residual mean=0.000077 rms=0.001763 Jy/beam
! Combined flux in latest and established models = 0.555443 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 37 components and 0.555443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106682Jy  sigma=1.107382
! Fit after  self-cal, rms=0.106666Jy  sigma=1.107133
! Inverting map 
! Added new window around map position (-9.5, 0.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00871264 Jy
! Component: 100  -  total flux cleaned = 0.00960023 Jy
! Component: 150  -  total flux cleaned = 0.00968601 Jy
! Component: 200  -  total flux cleaned = 0.00968557 Jy
! Total flux subtracted in 200 components = 0.00968557 Jy
! Clean residual min=-0.004193 max=0.004403 Jy/beam
! Clean residual mean=0.000036 rms=0.001208 Jy/beam
! Combined flux in latest and established models = 0.565129 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 61 components and 0.565129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106396Jy  sigma=1.097982
! Fit after  self-cal, rms=0.106355Jy  sigma=1.097482
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106355Jy  sigma=1.097482
! Fit after  self-cal, rms=0.102753Jy  sigma=1.045323
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146913 Jy
! Component: 100  -  total flux cleaned = 0.00146741 Jy
! Component: 150  -  total flux cleaned = 0.00146742 Jy
! Component: 200  -  total flux cleaned = 0.00146705 Jy
! Total flux subtracted in 200 components = 0.00146705 Jy
! Clean residual min=-0.003980 max=0.004583 Jy/beam
! Clean residual mean=0.000041 rms=0.001181 Jy/beam
! Combined flux in latest and established models = 0.566596 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 71 components and 0.566596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102634Jy  sigma=1.044191
! Fit after  self-cal, rms=0.102616Jy  sigma=1.041280
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.961 x 8.266 at -4.761 degrees (North through East)
! Clean map  min=-0.0037236  max=0.47591 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102616Jy  sigma=1.041280
! Fit after  self-cal, rms=0.097010Jy  sigma=0.968277
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097010Jy  sigma=0.968277
! Fit after  self-cal, rms=0.097081Jy  sigma=0.967955
! Inverting map and beam 
! Estimated beam: bmin=2.95 mas, bmaj=8.244 mas, bpa=-4.744 degrees
! Estimated noise=1.27609 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00174127 Jy
! Component: 100  -  total flux cleaned = 0.00174293 Jy
! Component: 150  -  total flux cleaned = 0.00174586 Jy
! Component: 200  -  total flux cleaned = 0.00174491 Jy
! Total flux subtracted in 200 components = 0.00174491 Jy
! Clean residual min=-0.003871 max=0.003365 Jy/beam
! Clean residual mean=0.000048 rms=0.001084 Jy/beam
! Combined flux in latest and established models = 0.568341 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 86 components and 0.568341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096962Jy  sigma=0.966991
! Fit after  self-cal, rms=0.097001Jy  sigma=0.966878
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097001Jy  sigma=0.966878
! Fit after  self-cal, rms=0.095628Jy  sigma=0.937187
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095628Jy  sigma=0.937187
! Fit after  self-cal, rms=0.095637Jy  sigma=0.937167
! Inverting map and beam 
! Estimated beam: bmin=2.946 mas, bmaj=8.238 mas, bpa=-4.764 degrees
! Estimated noise=1.27592 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141145 Jy
! Component: 100  -  total flux cleaned = 0.00149909 Jy
! Component: 150  -  total flux cleaned = 0.00153767 Jy
! Component: 200  -  total flux cleaned = 0.00153786 Jy
! Total flux subtracted in 200 components = 0.00153786 Jy
! Clean residual min=-0.004020 max=0.003206 Jy/beam
! Clean residual mean=0.000049 rms=0.001053 Jy/beam
! Combined flux in latest and established models = 0.569879 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 100 components and 0.569879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095559Jy  sigma=0.936563
! Fit after  self-cal, rms=0.095560Jy  sigma=0.936502
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.98 mas, bmaj=33.14 mas, bpa=-0.03613 degrees
! Estimated noise=1.67633 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000607082 Jy
! Component: 100  -  total flux cleaned = 0.000606206 Jy
! Component: 150  -  total flux cleaned = 0.000606557 Jy
! Component: 200  -  total flux cleaned = 0.000625097 Jy
! Total flux subtracted in 200 components = 0.000625097 Jy
! Clean residual min=-0.003686 max=0.003161 Jy/beam
! Clean residual mean=0.000078 rms=0.001371 Jy/beam
! Combined flux in latest and established models = 0.570504 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 104 components and 0.570504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095529Jy  sigma=0.936314
! Fit after  self-cal, rms=0.095529Jy  sigma=0.936290
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.148 mas, bmaj=6.443 mas, bpa=-2.755 degrees
! Estimated noise=2.17488 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.377014 Jy
! Component: 100  -  total flux cleaned = 0.465911 Jy
! Component: 150  -  total flux cleaned = 0.507003 Jy
! Component: 200  -  total flux cleaned = 0.529093 Jy
! Total flux subtracted in 200 components = 0.529092 Jy
! Clean residual min=-0.008379 max=0.011305 Jy/beam
! Clean residual mean=0.000121 rms=0.002596 Jy/beam
! Combined flux in latest and established models = 0.529092 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.529092 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.946 mas, bmaj=8.238 mas, bpa=-4.764 degrees
! Estimated noise=1.27592 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.5, 1).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0209642 Jy
! Component: 100  -  total flux cleaned = 0.0303777 Jy
! Component: 150  -  total flux cleaned = 0.0355768 Jy
! Component: 200  -  total flux cleaned = 0.0385151 Jy
! Total flux subtracted in 200 components = 0.0385151 Jy
! Clean residual min=-0.004132 max=0.003215 Jy/beam
! Clean residual mean=0.000057 rms=0.001079 Jy/beam
! Combined flux in latest and established models = 0.567607 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 64 components and 0.567608 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.98 mas, bmaj=33.14 mas, bpa=-0.03613 degrees
! Estimated noise=1.67633 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00222948 Jy
! Component: 100  -  total flux cleaned = 0.00268375 Jy
! Component: 150  -  total flux cleaned = 0.002846 Jy
! Component: 200  -  total flux cleaned = 0.00294867 Jy
! Total flux subtracted in 200 components = 0.00294867 Jy
! Clean residual min=-0.003904 max=0.003329 Jy/beam
! Clean residual mean=0.000076 rms=0.001359 Jy/beam
! Combined flux in latest and established models = 0.570556 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 72 components and 0.570556 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.946 mas, bmaj=8.238 mas, bpa=-4.764 degrees
! Estimated noise=1.27592 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 5.10566e-05 Jy
! Component: 100  -  total flux cleaned = 4.63968e-05 Jy
! Component: 150  -  total flux cleaned = 4.41962e-05 Jy
! Component: 200  -  total flux cleaned = 4.24291e-05 Jy
! Total flux subtracted in 200 components = 4.24291e-05 Jy
! Clean residual min=-0.003920 max=0.003326 Jy/beam
! Clean residual mean=0.000044 rms=0.001036 Jy/beam
! Combined flux in latest and established models = 0.570599 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 87 components and 0.570599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095363Jy  sigma=0.936047
! Fit after  self-cal, rms=0.095337Jy  sigma=0.935750
wmodel J0334-4008_S_2005_06_01_yyk\_map.mod
! Writing 87 model components to file: J0334-4008_S_2005_06_01_yyk_map.mod
wobs J0334-4008_S_2005_06_01_yyk\_uvs.fits
! Writing UV FITS file: J0334-4008_S_2005_06_01_yyk_uvs.fits
wwins J0334-4008_S_2005_06_01_yyk\_map.win
! wwins: Wrote 3 windows to J0334-4008_S_2005_06_01_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000934493 Jy
! Component: 100  -  total flux cleaned = -0.00048027 Jy
! Component: 150  -  total flux cleaned = -0.000319377 Jy
! Component: 200  -  total flux cleaned = -0.000318663 Jy
! Component: 250  -  total flux cleaned = -0.000174805 Jy
! Component: 300  -  total flux cleaned = 5.64172e-05 Jy
! Component: 350  -  total flux cleaned = 0.000280458 Jy
! Component: 400  -  total flux cleaned = 0.000496118 Jy
! Component: 450  -  total flux cleaned = 0.000703911 Jy
! Component: 500  -  total flux cleaned = 0.000865652 Jy
! Component: 550  -  total flux cleaned = 0.00102407 Jy
! Component: 600  -  total flux cleaned = 0.0011012 Jy
! Component: 650  -  total flux cleaned = 0.00121322 Jy
! Component: 700  -  total flux cleaned = 0.00132218 Jy
! Component: 750  -  total flux cleaned = 0.00146316 Jy
! Component: 800  -  total flux cleaned = 0.00156549 Jy
! Component: 850  -  total flux cleaned = 0.0016322 Jy
! Component: 900  -  total flux cleaned = 0.00173006 Jy
! Component: 950  -  total flux cleaned = 0.00176155 Jy
! Component: 1000  -  total flux cleaned = 0.00179292 Jy
! Component: 1050  -  total flux cleaned = 0.00179356 Jy
! Component: 1100  -  total flux cleaned = 0.00191412 Jy
! Component: 1150  -  total flux cleaned = 0.00191374 Jy
! Component: 1200  -  total flux cleaned = 0.00191326 Jy
! Component: 1250  -  total flux cleaned = 0.00188473 Jy
! Component: 1300  -  total flux cleaned = 0.00185683 Jy
! Component: 1350  -  total flux cleaned = 0.00174842 Jy
! Component: 1400  -  total flux cleaned = 0.00174879 Jy
! Component: 1450  -  total flux cleaned = 0.00167005 Jy
! Component: 1500  -  total flux cleaned = 0.00154123 Jy
! Component: 1550  -  total flux cleaned = 0.00138929 Jy
! Component: 1600  -  total flux cleaned = 0.00136486 Jy
! Component: 1650  -  total flux cleaned = 0.00141404 Jy
! Component: 1700  -  total flux cleaned = 0.00146269 Jy
! Component: 1750  -  total flux cleaned = 0.00143843 Jy
! Component: 1800  -  total flux cleaned = 0.00153333 Jy
! Component: 1850  -  total flux cleaned = 0.00155667 Jy
! Component: 1900  -  total flux cleaned = 0.00162616 Jy
! Component: 1950  -  total flux cleaned = 0.00164913 Jy
! Component: 2000  -  total flux cleaned = 0.001717 Jy
! Total flux subtracted in 2048 components = 0.00171689 Jy
! Clean residual min=-0.001415 max=0.001269 Jy/beam
! Clean residual mean=0.000037 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.572316 Jy
keep
! Adding 115 model components to the UV plane model.
! The established model now contains 202 components and 0.572316 Jy
![Exited script file: muppet]
wmap "J0334-4008_S_2005_06_01_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.946 x 8.238 at -4.764 degrees (North through East)
! Clean map  min=-0.0032829  max=0.46854 Jy/beam
! Writing clean map to FITS file: J0334-4008_S_2005_06_01_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.468536 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000443315 
device "J0334-4008_S_2005_06_01_yyk\_map.eps/VPS"
! Attempting to open device: 'J0334-4008_S_2005_06_01_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.283851 0.283851 0.567702 1.1354 2.27081 4.54161 9.08323 18.1665 36.3329 72.6658
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0013 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.468 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.946 x 8.238 at -4.764 degrees (North through East)
! Clean map  min=-0.0032829  max=0.46854 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0334-4008_S_2005_06_01_yyk\_map.gif/gif"
! Attempting to open device: 'J0334-4008_S_2005_06_01_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0334-4008_S_2005_06_01_yyk_uvs.log closed on Sat Oct  8 16:53:37 2005